Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomic layer etching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Multiscale and Multimodal Characterization of 2D Titanium Carbonitride MXene

Here, a comprehensive study on the prototype solid solution phase carbonitride MXene Ti 3 CN is conducted using nuclear magnetic resonance, electron spin resonance, total and quasi-elastic neutron scattering, combined with density functional theory-based electronic structure and molecular dynamic calculations. The combination of experiment and theory lead toward rational atomic structural models of Ti 3 CN. The remnant Al ions from the etching process significantly tune the interlayer spacing, distinct from the more typical MXene, Ti 3 C 2 , prepared similarly. Neutron scattering indicates the surface terminations of Ti 3 CN display high oxygen and fluorine concentrations and rather low hydroxyl and hydrogen concentrations. Calculations show that the structure including both the residual Al ions and mixed surface terminations give the best agreement with the measurements. The water molecules in Ti 3 CN are highly immobile, in strong contrast to those in Ti 3 C 2 . The analysis of the electronic structure suggests that the nitride MXene displays higher conductivity than the carbides. Finally, the absence of hydroxyl groups in terminations, the solid-solution in the anion sites, the remnants within layers, and immobile water altogether make the carbonitrides a unique series in the MXene family, implying a further exploration of their exotic properties and applications in energy storage.

36 MATERIALS SCIENCE↗

Tuning the extent of porosity and composition of N-doped carbon materials by NaNO3 and its effect on electrochemical activity

Highlights: • One-pot method using cheap NaNO{sub 3} as etching agent was developed to tune the porous structure. • NaNO{sub 3} was added into NaCl/ZnCl{sub 2} (NaCl 80 mol%) to form ionothermal salts. • The resultant carbon possesses a 3D hierarchical structure, with more mesopores ratio than micropores. • When NaNO{sub 3} amount is 5% in the salt mixture, the optimal ORR activity was obtained. - Abstract: A facile one-pot method using NaNO{sub 3} as etching agent in a molten salt medium is developed to tune the porous structure and composition of N-doped carbon materials derived from biomass at high temperatures. SEM and TEM analyses reveal that by increasing the amount of NaNO{sub 3}, the structures of the obtained carbons become more open and graphene-like layers are formed. N{sub 2} adsorption/desorption isotherms show that the hierarchical porous structure could be efficiently tuned by adjusting the amount of NaNO{sub 3} in the salt mixture. It is observed that the specific surface area of the as-prepared N-doped carbon using NaNO{sub 3} can reach 1430.1 m{sup 2} g{sup −1}, a much higher value than that of the sample prepared in the absence of NaNO{sub 3}. The micropore ratio decreases with increased amount of NaNO{sub 3}, from 49.42% to 9.98%. Whilst the surface composition of the obtained carbon materials is affected by NaNO{sub 3}. The N content increases and O decreases respectively, by increasing the amount of NaNO{sub 3}. Analysis on the N 1s high resolution reveals that the sum of pyridinic-N and graphitic-N increased, whereas the sum of pyridinic-N oxide and NO{sub x} decreases from NC-0 to NC-0.75. It is also found that the changes of the porous structure and the oxygen-containing groups from NC-0 to NC-0.75 led to changes in hydrophilicity. When the as-prepared carbon materials are used as catalysts for the oxygen reduction reaction, high catalytic activity values are obtained, sample NC-0.5 shows the best performance due to the porous structure and doping effect of N atoms. More importantly, it is concluded that producing N-doped carbon materials from soybean dregs in molten salt medium using NaNO{sub 3} as etching agent could provide a promising approach for the synthesis of opened N-doped carbons of controlled porous structures and large specific surface areas based on biomass precursors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Etching of a-Si:H thin films by hydrogen plasma: A view from in situ spectroscopic ellipsometry

When atomic hydrogen interacts with hydrogenated amorphous silicon (a-Si:H), the induced modifications are of crucial importance during a-Si:H based devices manufacturing or processing. In the case of hydrogen plasma, the depth of the modified zone depends not only on the plasma processing parameters but also on the material. In this work, we exposed a-Si:H thin films to H{sub 2} plasma just after their deposition. In situ UV-visible spectroscopic ellipsometry measurements were performed to track the H-induced changes in the material. The competition between hydrogen insertion and silicon etching leads to first order kinetics in the time-evolution of the thickness of the H-modified zone. We analyzed the correlation between the steady state structural parameters of the H-modified layer and the main levers that control the plasma-surface interaction. In comparison with a simple doped layer, exposure of a-Si:H based junctions to the same plasma treatment leads to a thinner H-rich subsurface layer, suggesting a possible charged state of hydrogen diffusing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation study of nanoparticle coating in a low pressure plasma reactor

A self-consistent combination of plasma fluid model, nanoparticle heating model, and surface deposition model is used to investigate the coating of nanosize particles by amorphous carbon layers in a low pressure plasma reactor. The numerical results show that, owing to the net heat release in the surface reactions, the particle temperature increases and its equilibrium value remains always 50 K above the background gas temperature. The deposition rate decreases with increasing of the particle temperature and the corresponding time scale is of the order of 10 ms. The deposition rate is also strongly affected by the change in plasma parameters. When the electron temperature is increased, the deposition rate first increases due to the enhanced ion and radical generation, shows a maximum and then declines as the particle temperature rises above the gas temperature. An enhancement in the background gas pressure and/or temperature leads to a reduction in the deposition rate, which can be explained in terms of the enhanced etching by atomic hydrogen and particle heating by the background gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Report for DE-SC0008059

Graphene, a one-atom thick material comprising hexagonally bonded carbon atoms, is one of the strongest materials known and is impermeable to even helium gas. The potential for creation of tunable nanometer-scale pores in graphene, combined with mechanical strength, chemical resistance, and atomic thickness, make it a promising material for improving selectivity, permeability, and energy efficiency in a diverse range of membrane separations. However, fundamental understanding of creation of porous graphene, its mass transport properties, and the relationship between porosity and membrane performance is lacking. This project studied methods to create pores in graphene by ion irradiation and etching, and investigated the effect of the porosity of graphene on mass transport properties at the membrane level as well as across individual pores. Detailed characterization of pore size distributions in graphene using high-resolution scanning transmission electron microscopy was performed to elucidate the relationship between different pore creation processes and the resulting porosity. New methods to create tunable nanometer-scale pores in graphene at high density over large areas were developed. Graphene membranes were fabricated comprising single-layer porous graphene on appropriate support membranes. Mass transport of ions, molecules, water, and gases across the membranes was investigated, and predictive models were developed to relate the graphene porosity and support membrane structure to the mass transport properties of the membranes. The effect of graphene porosity on permeance of the membranes to water, salts, and small molecules was experimentally quantified. Single-pore measurements were performed and a model was developed to understand ion transport across graphene pores, which led to the experimental observation of heterogeneity in transport behaviors and spontaneous fluctuations of ion transport. Functional single-layer nanoporous graphene membranes comprising a high density of pores over macro-scale areas with molecular selectivity were demonstrated for the first time. This project led to three patent applications and 9 journal articles. The fundamental developments in understanding nanoporous graphene membranes have laid the foundations to develop energy-efficient nanoporous graphene membranes for various applications in water desalination, oil and natural gas separations, biotechnology, and chemical processing.

36 MATERIALS SCIENCE↗

Atomic layer deposited lithium aluminum oxide: (In)dependency of film properties from pulsing sequence

Atomic layer deposition (ALD) holds markedly high potential of becoming the enabling method for achieving the three-dimensional all-solid-state thin-film lithium ion battery (LiB). One of the most crucial components in such a battery is the electrolyte that needs to hold both low electronic conductivity and at least fair lithium ion conductivity being at the same time pinhole free. To obtain these desired properties in an electrolyte film, one necessarily has to have a good control over the elemental composition of the deposited material. The present study reports on the properties of ALD lithium aluminum oxide (Li{sub x}Al{sub y}O{sub z}) thin films. In addition to LiB electrolyte applications, Li{sub x}Al{sub y}O{sub z} is also a candidate low dielectric constant (low-k) etch stop and diffusion barrier material in nanoelectronics applications. The Li{sub x}Al{sub y}O{sub z} films were deposited employing trimethylaluminum-O{sub 3} and lithium tert-butoxide-H{sub 2}O for Al{sub 2}O{sub 3} and Li{sub 2}O/LiOH, respectively. The composition was aimed to be controlled by varying the pulsing ratio of those two binary oxide ALD cycles. The films were characterized by several methods for composition, crystallinity and phase, electrical properties, hardness, porosity, and chemical environment. Regardless of the applied pulsing ratio of Al{sub 2}O{sub 3} and Li{sub 2}O/LiOH, all the studied ALD Li{sub x}Al{sub y}O{sub z} films of 200 and 400 nm in thickness were polycrystalline in the orthorhombic β-LiAlO{sub 2} phase and also very similar to each other with respect to composition and other studied properties. The results are discussed in the context of both fundamental ALD chemistry and applicability of the films as thin-film LiB electrolytes and low-k etch stop and diffusion barriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature ({<=}200 Degree-Sign C) plasma enhanced atomic layer deposition of dense titanium nitride thin films

Titanium nitride (TiN) has been widely used in the semiconductor industry for its diffusion barrier and seed layer properties. However, it has seen limited adoption in other industries in which low temperature (<200 Degree-Sign C) deposition is a requirement. Examples of applications which require low temperature deposition are seed layers for magnetic materials in the data storage (DS) industry and seed and diffusion barrier layers for through-silicon-vias (TSV) in the MEMS industry. This paper describes a low temperature TiN process with appropriate electrical, chemical, and structural properties based on plasma enhanced atomic layer deposition method that is suitable for the DS and MEMS industries. It uses tetrakis-(dimethylamino)-titanium as an organometallic precursor and hydrogen (H{sub 2}) as co-reactant. This process was developed in a Veeco NEXUS Trade-Mark-Sign chemical vapor deposition tool. The tool uses a substrate rf-biased configuration with a grounded gas shower head. In this paper, the complimentary and self-limiting character of this process is demonstrated. The effects of key processing parameters including temperature, pulse time, and plasma power are investigated in terms of growth rate, stress, crystal morphology, chemical, electrical, and optical properties. Stoichiometric thin films with growth rates of 0.4-0.5 A/cycle were achieved. Low electrical resistivity (<300 {mu}{Omega} cm), high mass density (>4 g/cm{sup 3}), low stress (<250 MPa), and >85% step coverage for aspect ratio of 10:1 were realized. Wet chemical etch data show robust chemical stability of the film. The properties of the film have been optimized to satisfy industrial viability as a Ruthenium (Ru) preseed liner in potential data storage and TSV applications.

36 MATERIALS SCIENCE↗

Microstructure, Morphology, and Nanomechanical Properties Near Fine Holes Produced by Electro-Discharge Machining

Fine holes in metal alloys are employed for many important technological purposes, including cooling and the precise atomization of liquids. For example, they play an important role in the metering and delivery of fuel to the combustion chambers in energy-efficient, low-emissions diesel engines. Electro-discharge machining (EDM) is one process employed to produce such holes. Since the hole shape and bore morphology can affect fluid flow, and holes also represent structural discontinuities in the tips of the spray nozzles, it is important to understand the microstructures adjacent to these holes, the features of the hole walls, and the nanomechanical properties of the material that was in some manner altered by the EDM hole-making process. Several techniques were used to characterize the structure and properties of spray-holes in a commercial injector nozzle. These include scanning electron microscopy, cross-sectioning and metallographic etching, bore surface roughness measurements by optical interferometry, scanning electron microscopy, and transmission electron microscopy of recast EDM layers extracted with the help of a focused ion beam.

electro-discharge machining↗

The atomic structure of low-index surfaces of the intermetallic compound InPd

The intermetallic compound InPd (CsCl type of crystal structure with a broad compositional range) is considered as a candidate catalyst for the steam reforming of methanol. Single crystals of this phase have been grown to study the structure of its three low-index surfaces under ultra-high vacuum conditions, using low energy electron diffraction (LEED), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). During surface preparation, preferential sputtering leads to a depletion of In within the top few layers for all three surfaces. The near-surface regions remain slightly Pd-rich until annealing to ∼580 K. A transition occurs between 580 and 660 K where In segregates towards the surface and the near-surface regions become slightly In-rich above ∼660 K. This transition is accompanied by a sharpening of LEED patterns and formation of flat step-terrace morphology, as observed by STM. Several superstructures have been identified for the different surfaces associated with this process. Annealing to higher temperatures (≥750 K) leads to faceting via thermal etching as shown for the (110) surface, with a bulk In composition close to the In-rich limit of the existence domain of the cubic phase. The Pd-rich InPd(111) is found to be consistent with a Pd-terminated bulk truncation model as shown by dynamical LEED analysis while, after annealing at higher temperature, the In-rich InPd(111) is consistent with an In-terminated bulk truncation, in agreement with density functional theory (DFT) calculations of the relative surface energies. More complex surface structures are observed for the (100) surface. Additionally, individual grains of a polycrystalline sample are characterized by micro-spot XPS and LEED as well as low-energy electron microscopy. Results from both individual grains and “global” measurements are interpreted based on comparison to our single crystals findings, DFT calculations and previous literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Fabrication of Atomically Defined Pores in MXenes Using Feedback-Driven STEM

Controlled fabrication of nanopores in 2D materials offer the means to create robust membranes needed for ion transport and nanofiltration. Techniques for creating nanopores have relied upon either plasma etching or direct irradiation; however, aberration-corrected scanning transmission electron microscopy (STEM) offers the advantage of combining a sub-Å sized electron beam for atomic manipulation along with atomic resolution imaging. Here, for this work, a method for automated nanopore fabrication is utilized with real-time atomic visualization to enhance the mechanistic understanding of beam-induced transformations. Additionally, an electron beam simulation technique, Electron-Beam Simulator (E-BeamSim) is developed to observe the atomic movements and interactions resulting from electron beam irradiation. Using the MXene Ti 3 C 2 T x , the influence of temperature on nanopore fabrication is explored by tracking atomic transformations and find that at room temperature the electron beam irradiation induces random displacement and results in titanium pileups at the nanopore edge, which is confirmed by E-BeamSim. At elevated temperatures, after removal of the surface functional groups and with the increased mobility of atoms results in atomic transformations that lead to the selective removal of atoms layer by layer. This work can lead to the development of defect engineering techniques within functionalized MXene layers and other 2D materials.

36 MATERIALS SCIENCE↗

Redeposition in plasma-assisted atomic layer deposition: Silicon nitride film quality ruled by the gas residence time

The requirements on the material properties and growth control of silicon nitride (SiN{sub x}) spacer films in transistors are becoming ever more stringent as scaling of transistor structures continues. One method to deposit high-quality films with excellent control is atomic layer deposition (ALD). However, depositing SiN{sub x} by ALD has turned out to be very challenging. In this work, it is shown that the plasma gas residence time τ is a key parameter for the deposition of SiN{sub x} by plasma-assisted ALD and that this parameter can be linked to a so-called “redeposition effect”. This previously ignored effect, which takes place during the plasma step, is the dissociation of reaction products in the plasma and the subsequent redeposition of reaction-product fragments on the surface. For SiN{sub x} ALD using SiH{sub 2}(NH{sup t}Bu){sub 2} as precursor and N{sub 2} plasma as reactant, the gas residence time τ was found to determine both SiN{sub x} film quality and the resulting growth per cycle. It is shown that redeposition can be minimized by using a short residence time resulting in high-quality films with a high wet-etch resistance (i.e., a wet-etch rate of 0.5 nm/min in buffered HF solution). Due to the fundamental nature of the redeposition effect, it is expected to play a role in many more plasma-assisted ALD processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Protective capping and surface passivation of III-V nanowires by atomic layer deposition

Low temperature (∼200 °C) grown atomic layer deposition (ALD) films of AlN, TiN, Al{sub 2}O{sub 3}, GaN, and TiO{sub 2} were tested for protective capping and surface passivation of bottom-up grown III-V (GaAs and InP) nanowires (NWs), and top-down fabricated InP nanopillars. For as-grown GaAs NWs, only the AlN material passivated the GaAs surface as measured by photoluminescence (PL) at low temperatures (15K), and the best passivation was achieved with a few monolayer thick (2Å) film. For InP NWs, the best passivation (∼2x enhancement in room-temperature PL) was achieved with a capping of 2nm thick Al{sub 2}O{sub 3}. All other ALD capping layers resulted in a de-passivation effect and possible damage to the InP surface. Top-down fabricated InP nanopillars show similar passivation effects as InP NWs. In particular, capping with a 2 nm thick Al{sub 2}O{sub 3} layer increased the carrier decay time from 251 ps (as-etched nanopillars) to about 525 ps. Tests after six months ageing reveal that the capped nanostructures retain their optical properties. Overall, capping of GaAs and InP NWs with high-k dielectrics AlN and Al{sub 2}O{sub 3} provides moderate surface passivation as well as long term protection from oxidation and environmental attack.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancement to the conductivity of surface transfer-doped (111) diamond through thermochemical surface etching

The use of a transition metal catalyzed thermochemical etching method for improving the carrier transport properties of the near-surface two-dimensional (2D) hole gas in surface transfer-doped hydrogen-terminated (111) diamond is demonstrated. Using Ni 0.8 Cr 0.2 films deposited and annealed to a temperature of 900 °C, with up to three etch cycles, preferential (111) surface etching produces large terraces exceeding 10 μm in size with a surface microroughness, σ 2 RMS λ, that is two orders of magnitude lower than for the pre-etched (111) surface. Magnetotransport measurements on hydrogen-terminated Hall bars engineered on the pre- and post-etched surfaces and rendered conductive by the adsorbed water layer formed on exposure to ambient conditions demonstrate that this etching causes an improvement in the hole mobility by an order of magnitude, resulting in a measured sheet resistivity of 1.04 kΩ/sq at a temperature of 4.2 K without gating.

42 ENGINEERING↗

Tailored ion energy distributions on plasma electrodes

As microelectronic device features continue to shrink approaching atomic dimensions, control of the ion energy distribution on the substrate during plasma etching and deposition becomes increasingly critical. The ion energy should be high enough to drive ion-assisted etching, but not too high to cause substrate damage or loss of selectivity. In many cases, a nearly monoenergetic ion energy distribution (IED) is desired to achieve highly selective etching. In this work, the author briefly reviews: (1) the fundamentals of development of the ion energy distribution in the sheath and (2) methods to control the IED on plasma electrodes. Such methods include the application of “tailored” voltage waveforms on an electrode in continuous wave plasmas, or the application of synchronous bias on a “boundary electrode” during a specified time window in the afterglow of pulsed plasmas.

36 MATERIALS SCIENCE↗

Low-temperature atomic layer deposition of TiO{sub 2} thin layers for the processing of memristive devices

Atomic layer deposition (ALD) represents one of the most fundamental techniques capable of satisfying the strict technological requirements imposed by the rapidly evolving electronic components industry. The actual scaling trend is rapidly leading to the fabrication of nanoscaled devices able to overcome limits of the present microelectronic technology, of which the memristor is one of the principal candidates. Since their development in 2008, TiO{sub 2} thin film memristors have been identified as the future technology for resistive random access memories because of their numerous advantages in producing dense, low power-consuming, three-dimensional memory stacks. The typical features of ALD, such as self-limiting and conformal deposition without line-of-sight requirements, are strong assets for fabricating these nanosized devices. This work focuses on the realization of memristors based on low-temperature ALD TiO{sub 2} thin films. In this process, the oxide layer was directly grown on a polymeric photoresist, thus simplifying the fabrication procedure with a direct liftoff patterning instead of a complex dry etching process. The TiO{sub 2} thin films deposited in a temperature range of 120–230 °C were characterized via Raman spectroscopy and x-ray photoelectron spectroscopy, and electrical current–voltage measurements taken in voltage sweep mode were employed to confirm the existence of resistive switching behaviors typical of memristors. These measurements showed that these low-temperature devices exhibit an ON/OFF ratio comparable to that of a high-temperature memristor, thus exhibiting similar performances with respect to memory applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ge/SiGe quantum wells on Si(111): Growth, structural, and optical properties

The epitaxial growth of Ge/Si{sub 0.15}Ge{sub 0.85} multiple quantum wells (MQWs) on Si(111) substrates is demonstrated. A 3 μm thick reverse, double-step virtual substrate with a final composition of Si{sub 0.10}Ge{sub 0.90} has been employed. High resolution XRD, TEM, AFM and defect etching analysis has been used for the study of the structural properties of the buffer and of the QWs. The QW stack is characterized by a threading dislocation density of about 3 × 10{sup 7 }cm{sup −2} and an interdiffusion layer at the well/barrier interface of 2.1 nm. The quantum confined energy levels of this system have been calculated using the k·p and effective mass approximation methods. The Ge/Si{sub 0.15}Ge{sub 0.85} MQWs have been characterized through absorption and photoluminescence measurements. The optical spectra have been compared with those of Ge/Si{sub 0.15}Ge{sub 0.85} QWs grown on Si(001) through a thick graded virtual substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Spectral Resolution With Multilayer Gratings

The improvement of spectral resolution brought about by the use of multilayer grating (MG) instead of multilayer mirror (MM) is analyzed. The spectrum of a complex sample containing various elements excited under electron irradiation is studied. This sample is a pellet made by pressing powders of Cu and compounds with Fe and F atoms. The MM is a Mo/B{sub 4}C periodic multilayer with a period of about 6 nm; for the MG a grating of 1 {mu}m period has been etched in the MM. It is shown that the MG can easily resolve the F Kalpha and Fe Lalpha emissions, separated by about 30 eV, whereas the MM is unable to give such a performance. A comparison with an EDS (SDD) detector is also given. It is also shown that the MG can improve the detection limit. Finally the role of the slit placed in front of the detector is discussed.

36 MATERIALS SCIENCE↗

Metastable Intermediates in Amorphous Titanium Oxide: A Hidden Role Leading to Ultra-Stable Photoanode Protection

Metastable intermediates represent a non-equilibrium state of matter that may impose profound impacts to materials properties beyond our understandings of monolithic and equilibrium systems. Here, we report a discovery of hidden metastable intermediates in amorphous TiO 2 thin films and their critical role in electrochemical damage. These intermediates have a non-bulk crystal-like structure and exhibit significantly higher electrical conductivity than both the amorphous and the crystalline phases. When these TiO 2 films are applied to protect Si photoelectrochemical (PEC) photoanodes, the intermediates can induce localized high electrical currents that largely accelerate the etching of the TiO 2 film and the Si electrode underneath. The intermediates can be effectively suppressed by raising their nucleation barrier via reducing the film thickness from 24 to 2.5 nm. The homogeneous amorphous TiO 2 -film-coated Si photoanodes achieved more than 500 h of PEC water oxidation at a steady photocurrent density of over 30 mA·cm –2 .

36 MATERIALS SCIENCE↗