SEARCH · Search NASA

Results for “canting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Forward velocity effects on fan noise and the suppression characteristics of advanced inlets as measured in the NASA Ames 40 by 80 foot wind tunnel: Acoustic data report

Moore, M. T.↗

NASA NTRS1981

Investigation of powered nacelles on a high aspect ratio NASA supercritical wing, phase 2

A modified wing with the long core separate flow nacelle and several E(3) nacelles was utilized. The effects of nacelle and pylon cant angles and nacelle longitudinal and vertical location were investigated over a Mach number range from 0.70 to 0.83. The results at the cruise condition 0.82 Mach number and 0.55 lift coefficient are presented.

Flechner, S. G.↗

NASA NTRS1971

Preliminary wind-tunnel investigation of the effects of engine nacelles on a transport configuration with high lift drag ratios to a Mach number of 1.00

Wind tunnel tests to determine the effect of engine nacelles added to a low wing fuselage vertical tail configuration utilizing the NASA supercritical airfoil and a refined area ruled fuselage are discussed. The engine arrangement consisted of two aft fuselage, side mounted flow through nacelles and a solid body of revolution mounted above the fuselage in a manner similar to the Boeing 727. A preliminary analysis of the wind tunnel data shows that favorable interference drag can be obtained with the proper longitudinal locations of the nacelles, by canting the nacelle inlets, and by cusping the rearward region of the nacelle.

Flechner, S. G.↗

NASA NTRS1981

Foldable beam

A foldable beam possessing superior qualities of light weight, compactness for transportation, quick deployment with minimum use of force, and high strength is described. These qualities are achieved through the use of a series of longitudinally rigid segments, hinged along one side and threaded by one or two cables along the opposite side. Tightening the cables holds the beam extended. Loosening the cables permits the segments to fold away from the threaded side. In one embodiment the segments are connected by canted hinges with the result that the beam may be folded in a helix-like configuration around a cylinder. In another embodiment the segments themselves may be hinged to fold flat laterally as the beam is folded, resulting in a configuration that may be helixed around a shorter cylinder.

Hedgepeth, J. M.↗

NASA NTRS1981

Effects of wingtip modifications on handling qualities of agricultural aircraft

The effect of wingtip modifications on the stability and control characteristics of an agricultural airplane has been studied by means of a nonplanar quasi-vortex-lattice method. The method is used to compute the changes in steady state and perturbed state lateral-directional stability and control derivatives produced by wingtip mounted winglets, vortex diffuser vanes, and tip extensions. The study shows that the combination of the excessive positive dihedral effect produced by the winglets and adverse yaw due to aileron deflection can have a detrimental effect on the roll control characteristics of the airplane. Introduction of an aileron-rudder-interconnect, and reduction of the effective dihedral by canting-in of the winglets, or addition of a lower winglet can eliminate the roll control problems.

Van Dam, C. P.↗

NASA NTRS1980

Forward velocity effects on fan noise and the suppression characteristics of advanced inlets as measured in the NASA-Ames 40 by 80 foot wind tunnel

Forward velocity effects on the forward radiated fan noise and on the suppression characteristics of three advanced inlets relative to a baseline cylindrical inlet were measured in the NASA Ames Research Center 40 x 80 foot Wind Tunnel. A modified JT15D turbofan engine in a quiet nacelle was the source of fan noise; the advanced inlets were a Conventional Takeoff/Landing (CTOL) hybrid inlet, a Short Takeoff/Landing (STOL) hybrid inlet, and a treated deflector inlet. Also measured were the static to flight effects on the fan noise of canting the baseline inlet 4 deg downward to simulate typical wing mounted turbofan engines. The CTOL hybrid inlet suppressed the high tip speed fan noise as much as 18 PNdB on a 61 m (200 ft) sideline scaled to a CF6 size engine while the STOL hybrid inlet suppressed the low tip speed fan noise as much as 13 PNdB on a 61 m (200 ft) sideline scaled to a OCSEE size engine. The deflector inlet suppressed the high tip speed fan noise as much as 13 PNdB at 61 m (200 ft) overhead scaled to a CF6 size engine. No significant changes in fan noise suppression for the CTOL and STOL hybrid inlets occurred for forward velocity changes above 21 m/s (68 ft/s) or for angle of attack changes up to 15 deg. However, changes in both forward velocity and angle of attack changed the deflector inlet noise unpredictably due to the asymmetry of the inlet flow field into the fan.

Moore, M. T.↗

NASA NTRS1982

The Development of a Handbook for Astrobee F Performance and Stability Analysis

An astrobee F performance and stability analysis is presented, for use by the NASA Sounding Rocket Division. The performance analysis provides information regarding altitude, mach number, dynamic pressure, and velocity as functions of time since launch. It is found that payload weight has the greatest effect on performance, and performance prediction accuracy was calculated to remain within 1%. In addition, to assure sufficient flight stability, a predicted rigid-body static margin of at least 8% of the total vehicle length is required. Finally, fin cant angle predictions are given in order to achieve a 2.5 cycle per second burnout roll rate, based on obtaining 75% of the steady roll rate. It is noted that this method can be used by flight performance engineers to create a similar handbook for any sounding rocket series.

Wolf, R. S.↗

NASA NTRS1983

Effects of twin-vertical-tail parameters on twin-engine afterbody/nozzle aerodynamic characteristics

The Langley 16-foot transonic tunnel was used to determine the effects of several empennage and afterbody parameters on twin-engine aft-end aerodynamic characteristics. Model variables included twin-vertical-tail cant angle, toe angle, airfoil camber, and root-chord length and afterbody/engine interfairing shape. Tests were conducted over a Mach number range from 0.6 to 1.2 and over an angle-of-attack range from 2 deg to 10 deg. Nozzle pressure ratio was varied from 1.0 (jet off) to approximately 10.0.

Leavitt, L. D.↗

NASA NTRS1983

Effects of various empennage parameters on the aerodynamic characteristics of a twin-engine afterbody model

An experimental investigation to determine the effects of various empennage parameters on aft-end drag and tail interference drag characteristics of a twin-engine, axisymmetric nozzle, afterbody model has been conducted in the Langley 16-Foot Transonic Tunnel. Model variables included: horizontal tail location; vertical tail location, toe angle, cant angle, configuration (single and twin) and airfoil (Symmetrical and cambered); and tail booms. Tests were conducted over a Mach number range from 0.6 to 1.2 and over an angle-of-attack range from -2 to 10 deg. Nozzle pressure ratio was varied from jet off to approximately 10.0.

Leavitt, L. D.↗

NASA NTRS1983

Empennage/afterbody integration for single and twin-engine fighter aircraft

An extensive experimental program to determine the effects of empennage surfaces on single and twin-engine afterbody/nozzle drag has been conducted by the Propulsion Aerodynamics Branch at the NASA Langley Research Center. Empennage interference drag was obtained by using experimental values of afterbody/nozzle drag and computed values of empennage drag. The effects of tail location, span, number (single versus twin), toe angle, cant angle, camber and root chord length are discussed. The magnitude of empennage interference drag on single and twin engine configurations is examined.

Berrier, B. L.↗

NASA NTRS1983

Magnus effects on spinning transonic missiles

Magnus forces and moments were measured on a basic-finner model spinning in transonic flow. Spin was induced by canted fins or by full-span or semi-span, outboard and inboard roll controls. Magnus force and moment reversals were caused by Mach number, reduced spin rate, and angle of attack variations. Magnus center of pressure was found to be independent of the angle of attack but varied with the Mach number and model configuration or reduced spin rate.

Seginer, A.↗

NASA NTRS1985

Energy-Absorbing Airframes for General Aviation

Concept for protecting people in lightweight airplane crashes involves redesigning area between interior floor and outer skin of airplane belly to create subfloor strong enough to bear stresses of flight but crush under force of impact. Several concepts evaluated and five selected and designed as lower fuselage sections tested in NASA's crash-testing program. Notched corner concept, Corrugated Beam concept, Foam-Filled Cylinder concept, Corrugated Half Shell concept, and Canted Bulkhead concept. Experimental and analytical results indicate all five concepts perform well; upper floor remains structurally intact whereas crush zone collapses under essentially constant load.

Carden, H. D.↗

NASA NTRS1984

A mathematical model of the UH-60 helicopter

This report documents the revisions made to a ten-degree-of-freedom, full-flight envelope, generic helicopter mathematical model to represent the UH-60 helicopter accurately. The major modifications to the model include fuselage aerodynamic force and moment equations specific to the UH-60, a canted tail rotor, a horizontal stabilator with variable incidence, and a pitch bias actuator (PBA). In addition, this report presents a full set of parameters and numerical values which describe the helicopter configuration and physical characteristics. Model validation was accomplished by comparison of trim and stability derivative data generated from the UH-60 math model with data generated from a similar total force and moment math model.

Hilbert, K. B.↗

NASA NTRS1982

KC-135 Winglet Program Review

The results of a joint NASA/USAF program to develop flight test winglets on a KC-135 aircraft are reviewed. The winglet development from concept through wind tunnel and flight tests is discussed. Predicted, wind tunnel, and flight test results are compared for the performance, loads and flutter characteristics of the winglets. The flight test winglets had a variable winglet cant and incidence angle capability which enabled a limited evaluation of the effects of these geometry changes.

Source record↗

NASA NTRS1984

A generalized analysis of dual-polarization radar measurements of rain

In the study of meteorological phenomena by radar, it has been shown that dual-polarization radar measurements can yield useful data about precipitation structures within the radar beam. The techniques available for dual-polarized radar measurement are differential reflectivity, or Z(DR), linear depolarization ratio (LDR), and circular depolarization ratio (CDR). This paper presents a theoretical analysis of backscattering from a volume filled with raindrops using Rayleigh scattering theory. A generalized radar equation is given in matrix form, and the dependence of backscatter measurements in terms of a rainstorm model including raindrop shape, size, and canting angle is examined. Calculated results which show the dependence of Z(DR) on beam elevation angle and polarization angle are presented. Some results for LDR and CDR are presented, showing how these quantities depend on raindrop parameters.

Stapor, D. P.↗

NASA NTRS1983

Computing the projected area of a spacecraft solar array with matrices

Matrix methods for computing the projected area of a solar array as a function of the rotational position of a spacecraft and of array position on a spacecraft are presented. Formulas are derived which provide the optimum solar array pitch, cant and tracking angles for a given spacecraft configuration and orbit. These formulas are general and applicable to many spacecraft. Formulas are also provided for determining the energy output from an array for a given orbit and the resultant energy available to spacecraft loads. Results are simply obtained and realizable with a hand calculator. The methods above can be extended to the case of computer analysis of solar array shadowing. How this can be done is outlined and results are presented from a spacecraft study program.

E. M. Gaddy↗

NASA NTRS1983

The VPI&SU multiple polarization plane ZDR radar - The OCTOPOD radar

The 'OCTOPOD' radar extends the concept of differential reflectivity (ZDR) to multiple polarization planes, so that ZDR measurements can be made in any pair of orthogonal linear polarizations. This allows the mean canting angle of oblate raindrops or ice particles to be determined. Attention is given to the radar hardware employed, the rotating feed system that generates the multiple polarization planes, and the computer controlled data acquisition system which extracts both reflectivity and ZDR data.

Andrews, J. H.↗

NASA NTRS1985

Exploratory low-speed wind-tunnel study of concepts designed to improve aircraft stability and control at high angles of attack

A wind tunnel investigation of concepts to improve the high angle-of-attack stability and control characteristics of a high performance aircraft was conducted. The effect of vertical tail geometry on stability and the effectiveness of several conventional and unusual control concepts was determined. These results were obtained over a large angle-of-attack range. Vertical tail location, cant angle and leading edge sweep could influence both longitudinal and lateral-directional stability. The control concepts tested were found to be effective and to provide control into the post stall angle-of-attack region.

Hahne, D. E.↗