Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Global kinetic modeling of NH 3 -SCR with two sites of NH 3 storage on Cu-SSZ-13

A comprehensive selective catalytic reduction (SCR) model is developed to detail the global kinetic reactions in the catalyst which is involved in two type of sites for high- and low-temperature NH 3 adsorption/desorption, as well as a low temperature H 2 O storage. The model accounts for the formation of ammonium nitrate in fast SCR and the decomposition formation of ammonium nitrate in the absence of NO, and addresses N 2 O relative to NO and NO 2 reactions with NH 3 . The model has been validated against commercial Cu-SSZ-13 measurements of NH 3 inventory, NH 3 oxidation, NO oxidation, standard SCR, fast SCR and NO 2 SCR at both comprehensive steady-state and transient conditions. In addition, the application of the SCR model for emissions control over a transient drive cycle at cold start was demonstrated based on diesel oxidation catalyst (DOC) and SCR aftertreatment system for a passenger car. In conclusion, the results show that the SCR model can provide the detailed emissions estimations for steady-state and transient conditions, can assist with understanding the impact of the SCR reaction mechanism, and can assist with the design and optimization of SCR catalysts to develop innovative technologies for co-optimization of engine fuel economy and emissions control technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Core-Shell Oxidative Aromatization Catalysts for Single Step Liquefaction of Distributed Shale Gas (Final Technical Report)

The objective of this project was to design and demonstrate a core-shell structured multifunctional catalyst to convert the light (dry) components of shale gas into liquid aromatic compounds (primarily benzene and toluene) in a single step. Operated in a modular oxidative aromatization system (OAS) under a cyclic redox scheme, the novel catalyst and process can significantly improve the value and transportability of distributed shale gas. Since the project started, each quarter addressed a different set of tasks related to the completion of the milestone detailed in the project award. The yearly summaries of these tasks are summarized below: Q1-Q4: • Conducted project planning and literature search. • Investigated a number of SHC redox catalysts using thermogravimetric analysis and fixed-bed reactor experiments. • Initiated process modeling towards generating two process models for the methane DHA base case and OAS process. • Developed DHA catalysts capable of producing >500 g/kg-cat-hr aromatics at 80% or greater aromatics selectivity at 700°C. Q5-Q8: • Developed alternative approaches with sequential bed configurations to enhance the aromatic yields based on OCM+DHA • Improved the zeolite synthesis efficiency by using the microwave-assisted technique and investigated the synthesis conditions on the zeolite yield, crystalline structure and morphology • Constructed a set of Aspen Plus process models with significant energy savings for OAS as compared to the base case non-oxidative DHA. • Adapted conventional hydrothermal method to be applicable to the microwave synthesizer unit for more efficient catalyst synthesis. • Studied the structure of the OCM catalyst and the dispersion of the carbonate in the redox reactions and in methane flow with Raman Spectroscopy. Q9-Q12: • Scaled up the catalyst synthesis with the microwave synthesis method. Based on its performance, procedural characterizations and catalytic performance testing were further conducted for the new microwave synthesized catalysts with the newly-developed product analysis procedure. • Developed the reaction system setup for the C2-DHA or OCM+DHA reaction product and achieved a better product collection-analysis method for the aromatic products with an improved carbon balance. The product from the OCM reaction exhibited complicated effects on the DHA catalyst. • Conducted additional OCM catalyst characterization using Near Ambient Pressure X-ray Photoelectron Spectroscopy and in situ Raman characterization • Validated the significant energy savings for OAS as compared to the base case non-oxidative DHA. Successfully set up the simulation model for the OCM+DHA+SHC reaction system based on the updated experimental results from NCSU. Q13-End of project: • Synthesized new zeolite catalysts by the microwave method, conducted characterizations (XRD, SEM, and TEM) and catalytic behavior testing. • Explored the “wet” C 2 H 6 and C 2 H 4 DHA reactions with using steam co-feed. A subsequent reduction as the regeneration step can regenerate the DHA catalyst and recover 99% activity of the fresh performance. • Achieved a 15.3% single-pass aromatic yield from methane by rationally combining the OCM and DHA at different temperatures. • Conducted a 105-hour stability test with an improved regeneration procedure, with an average aromatic yield of 13.8%. • Developed new catalyst and achieved a record-high 23.2% yield.

03 NATURAL GAS↗

Developing novel electrodes with ultralow catalyst loading for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells

Hydrogen plays more crucial roles for decarbonizing the planets and meeting the climate challenges because of its high energy density and zero-emission. It can be produced with proton exchange membrane electrolyzer cells (PEMECs) driven by sustainable and renewable energy resources. Although PEMECs have a number of advantages, including high purity production, quick response, and the ability to operate at high pressure facilitating the gas delivering, their performance and cost greatly hinder their commercial-scale applications. To achieve high-efficiency and cost-reduced hydrogen production in PEMECs, we proposed thin engineered liquid/gas diffusion layers (LGDLs) and associated electrodes, i.e., catalyst-coated LGDLs (CCLGDLs), over conventional porous transport layers (PTLs) and catalyst-coated membranes (CCMs). The research approaches in this project are based on material synthesis, in-situ and ex-situ characterizations, component design and treatment, numerical modeling, and cost analysis. The thin and tunable LGDLs (TT-LGDLs) and CCLGDLs were successfully developed with great performance improvement as demonstrated in lab-scale, bench-scale, and system-scale electrolyzer tests. The electrode thickness was reduced from 370 µm to less than 100 µm with simplified fabrication processes. With the catalytically enhanced Ir-based catalyst coating, the as-developed CCLGDLs with a catalyst loading of 0.34 mg Ir /cm 2 achieved a cell performance of 1.77 V at 2 A cm -2 , exhibiting the catalyst mass activity enhanced by >20 times with significant catalyst saving over conventional catalyst cell design. In-situ PEMEC characterizations, including the current distribution mapping and high-speed and multiscale visualizations, were conducted for a deeper understanding of mass transport and electrochemical reactions within an electrolyzer with LGDLs and CCLGDLs. A 2D cell model was developed and validated for the enhanced performance on TT-LGDL through reducing ohmic losses due to nonuniform hydration and water transport. Further, the cost analysis results have shown a path to move beyond equivalency and surpass costs associated with the project baseline. In this project, the design and fabrication of TT-LGDLs and CCLGDLs will contribute to the performance enhancement, manufacturing simplification, and cost reduction for PEMECs and other energy conversion devices, thus shortening their pathways towards commercialization. This project also provides a good foundation for furthering the in-situ reaction interface research.

08 HYDROGEN↗

Control of Catalyst Isomers Using an N -Phenyl-Substituted RN(CH 2 CH 2 P i Pr 2 ) 2 Pincer Ligand in CO 2 Hydrogenation and Formic Acid Dehydrogenation

A novel pincer ligand, i Pr PN Ph P [PhN- (CH 2 CH 2 P i Pr 2 ) 2 ], which is an analogue of the versatile MACHO ligand, iPr PN H P [HN(CH 2 CH 2 P i Pr 2 ) 2 ], was synthesized and characterized. The ligand was coordinated to ruthenium, and a series of hydride-containing complexes were isolated and characterized by NMR and IR spectroscopies, as well as X-ray diffraction. Comparisons to previously published analogues ligated by iPr PN H P and iPr PN Me P [CH 3 N(CH 2 CH 2 P i Pr 2 ) 2 ] illustrate that there are large changes in the coordination chemistry that occur when the nitrogen substituent of the pincer ligand is altered. For example, ruthenium hydrides supported by the iPr PN Ph P ligand always form the syn isomer (where syn/anti refer to the relative orientation of the group on nitrogen and the hydride ligand on ruthenium), whereas complexes supported by iPr PN H P form the anti isomer and complexes supported by iPr PN Me P form a mixture of syn and anti isomers. We evaluated the impact of the nitrogen substituent of the pincer ligand in catalysis by comparing a series of iPr PN R P (R = H, Me, Ph)-ligated ruthenium hydride complexes as catalysts for formic acid dehydrogenation and carbon dioxide (CO 2 ) hydrogenation to formate. The iPr PN Ph P-ligated species is the most active for formic acid dehydrogenation, and mechanistic studies suggest that this is likely because there are kinetic advantages for catalysts that operate via the syn isomer. In CO 2 hydrogenation, the iPr PN Ph P-ligated species is again the most active under our optimal conditions, and we report some of the highest turnover frequencies for homogeneous catalysts. Experimental and theoretical insights into the turnover-limiting step of catalysis provide a basis for the observed trends in catalytic activity. Additionally, the stability of our complexes enabled us to detect a previously unobserved autocatalytic effect involving the base that is added to drive the reaction. Overall, by modifying the nitrogen substituent on the MACHO ligand, we have developed highly active catalysts for formic acid dehydrogenation and CO 2 hydrogenation and also provided a framework for future catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane Generation from CO 2 with a Molecular Rhenium Catalyst

The atomic-level tunability of molecular structures is a compelling reason to develop homogeneous catalysts for challenging reactions such as the electrochemical reduction of carbon dioxide to valuable C 1 –C n products. Of particular interest is methane, the largest component of natural gas. Herein, we report a series of three isomeric rhenium tricarbonyl complexes coordinated by the asymmetric diimine ligands 2-(isoquinolin-1-yl)-4,5-dihydrooxazole ( quin-1-oxa ), 2-(quinolin-2-yl)-4,5-dihydrooxazole ( quin-2-oxa ), and 2-(isoquinolin-3-yl)-4,5-dihydrooxazole ( quin-3-oxa ) that catalyze the reduction of CO 2 to carbon monoxide and methane, albeit the latter with a low efficiency. To our knowledge, these complexes are the first examples of rhenium(I) catalysts capable of converting carbon dioxide into methane. Re(quin-1-oxa)(CO) 3 Cl ( 1 ), Re(quin-2-oxa)(CO) 3 Cl ( 2 ), and Re(quin-3-oxa)(CO) 3 Cl ( 3 ) were characterized and studied using a variety of electrochemical and spectroscopic techniques. In bulk electrolysis experiments, the three complexes reduce CO 2 to CO and CH 4 . When the controlled-potential electrolysis experiments are performed at -2.5 V (vs Fc +/0 ) and in the presence of the Brønsted acid 2,2,2-trifluoroethanol, methane is produced with turnover numbers that range from 1.3 to 1.8. Isotope labeling experiments using 13 CO 2 atmosphere produce 13 CH 4 ( m / z = 17) confirming that methane originates from CO 2 reduction. Theoretical calculations are performed to investigate the mechanistic aspects of the 8e – /8H + reduction of CO 2 to CH 4 . Overall, a ligand-assisted pathway is proposed to be an efficient pathway in the formation of CH 4 . Delocalization of the electron density on the (iso)quinoline moiety upon reduction stabilizes the key carbonyl intermediate leading to additional reactivity of this ligand. These results should aid the development of more robust catalytic systems that produce CH 4 from CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Bosch Process-Performance of a Developmental Reactor and Experimental Evaluation of Alternative Catalysts

Bosch-based reactors have been in development at NASA since the 1960's. Traditional operation involves the reduction of carbon dioxide with hydrogen over a steel wool catalyst to produce water and solid carbon. While the system is capable of completely closing the loop on oxygen and hydrogen for Atmosphere Revitalization, steel wool requires a reaction temperature of 650C or higher for optimum performance. The single pass efficiency of the reaction over steel wool has been shown to be less than 10% resulting in a high recycle stream. Finally, the formation of solid carbon on steel wool ultimately fouls the catalyst necessitating catalyst resupply. These factors result in high mass, volume and power demands for a Bosch system. Interplanetary transportation and surface exploration missions of the moon, Mars, and near-earth objects will require higher levels of loop closure than current technology cannot provide. A Bosch system can provide the level of loop closure necessary for these long-term missions if mass, volume, and power can be kept low. The keys to improving the Bosch system lie in reactor and catalyst development. In 2009, the National Aeronautics and Space Administration refurbished a circa 1980's developmental Bosch reactor and built a sub-scale Bosch Catalyst Test Stand for the purpose of reactor and catalyst development. This paper describes the baseline performance of two commercially available steel wool catalysts as compared to performance reported in the 1960's and 80's. Additionally, the results of sub-scale testing of alternative Bosch catalysts, including nickel- and cobalt-based catalysts, are discussed.

Abney, Morgan B.↗

The development of novel organomanganese hydration catalysts and uranium oxo-imido complexes to provide insights into redox chemistry and bonding properties

This project is focused on the development of novel Mn complexes that will be useful as hydrolysis catalysts for substrates such as nitriles, esters, and amides. This Mn chemistry will provide a useful platform to develop the capabilities that are necessary to synthesize and manipulate air and moisture sensitive compounds while simultaneously exploring the novel chemistry associated a new class of low-valent metal hydroxide complexes. The primary research objective of the proposed Mn chemistry the synthesis of well-defined Mn hydroxide complexes that will use the nucleophilicity of the hydroxide ligand in an anhydrous environment as a catalyst for desirable organic transformations. Several metal-ligand combinations are explored and have been extended to nickel, ruthenium and iron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

(Invited) Understanding Multi-Component Transport and Reaction Phenomena in Bipolar Membranes Used for Electrosynthesis

Bipolar membranes (BPMs), which have long seen usage in electrodialysis reactors for the generation of acid and base, have recently demonstrated potential to become critical components in electrochemical synthesis devices. Because they can operate under large pH gradients, BPMs enable favorable environments for electrocatalysis at the individual electrodes. Critical to the implementation of BPMs in these devices is understanding the kinetics of water dissociation that occurs within the BPM junction as well as the co- and counter-ion crossover through the BPM, which both present significant obstacles to developing efficient and stable BPM-devices for electrosynthesis applications. Prior work has modeled ion transport in bipolar membranes in neutral salt solutions for electrodialysis. However, no model exists for the BPM under the harsh applied pH gradients that would be present in electrosynthesis, and there is significant need to explore the effects of the internal hydration on the lifetime and performance of BPMs in such environments. Additionally, a mechanistic understanding of water dissociation catalysis will be required to develop interfacial catalysts that enable the high current density operation required for scalable electrosynthesis of fuels. In this talk, we discuss modeling methodologies and physics inherent in BPMs and present our recent model of ion transport and water dissociation catalysis in BPMs across the pH scale. Specifically, we simulate multi-ion transport for a BPM with various electrolyte combinations on each side of the membrane, demonstrating the significance of co- and counter-ion crossover in BPMs operating under harsh pH gradients. We then investigate effects caused by hydration gradients that occur due to internal ion-exchange and examine potential methods for improving performance and mitigating crossover. Finally, we examine the impact of the interfacial water dissociation catalyst and perform sensitivity analysis on the key properties (catalyst point of zero charge and pKa) that dictate catalyst performance. These results provide information that is critical to developing a comprehensive understanding of multi-component phenomena in BPMs and to informing the design and implementation of BPMs in next-generation devices for the numerous electrosynthesis chemistries that benefit from operation under an applied pH gradient.

Bui, Justin C↗

Engineered Nanostructured MEA Technology for Low Temperature Fuel Cells

The objective of this project is to develop a novel catalyst support technology based on unique engineered nanostructures for low temperature fuel cells which: (1) Achieves high catalyst activity and performance; (2) Improves catalyst durability over current technologies; and (3) Reduces catalyst cost. This project is directed at the development of durable catalysts supported by novel support that improves the catalyst utilization and hence reduce the catalyst loading. This project will develop a solid fundamental knowledge base necessary for the synthetic effort while at the same time demonstrating the catalyst advantages in Direct Methanol Fuel Cells (DMFCs).

30 DIRECT ENERGY CONVERSION↗

Tafel Fitter v1.5

This program a new physical insight regarding efforts to evaluate electrochemical catalysts being developed for electrochemical energy conversion and storage. In particular, we ask: The methodology described here offers a solution to the problem of how to conduct Tafel analysis, which is used in determining electrocatalyst performance, in a quantitative manner, rather than through the qualitative guesswork it currently requires. This enables the measurement of electrocatalyst Tafel slopes and their associated parameters in a way that avoids the introduction of researcher bias, a problem to which current methods of Tafel fitting are prone. This procedure should significantly improve the ability of researchers working in the field of electrochemical energy conversion to rate and compare the catalyst materials being developed, advancing the characterization toolkit available to experimental electrochemists. This work is born out of our general hypothesis that it should be possible to determine the proper regions for unambiguously fitting Tafel data by applying some set of physical constraints that link aspects of a Tafel plot to its corresponding J-V polarization curve. This algorithm applies such constraints and achieves the extraction of Tafel slopes in a wholly quantifiable and reliable fashion. Verification of this approach is achieved by pairing the theory with experiment, as the algorithm was tested using experimentally acquired data of three distinct, electrochemical reactions: platinum hydrogen evolution, iridium-catalyzed oxygen evolution, and platinum-catalyzed dioxygen reduction. For each of these cases, the algorithm predicts the same Tafel slope as those reported in long-established bodies of electrochemical literature, results suggesting the general applicability of this method for determining electrocatalyst Tafel slopes.

Agbo, Peter↗

Developing single-site Pt catalysts for the preferential oxidation of CO: A surface science and first principles-guided approach

Here, we report a comprehensive study combining surface science, Density Functional Theory (DFT) calculations, and catalyst synthesis, characterization, and testing to investigate the preferential oxidation of CO in the presence of H 2 over single-site Pt 1 /Cu x O catalysts. Surface science studies show that while Pt 1 /Cu x O model surfaces enable low-temperature CO oxidation via a Mars-van Krevelen mechanism, there was no evidence for H 2 activation or oxidation. DFT-based calculations explain these results and demonstrate that the H 2 oxidation barrier is high as compared to H 2 desorption from Pt 1 /Cu x O. Inspired by these model catalyst studies, nanoporous Pt 1 /Cu x O catalysts were synthesized and demonstrated to be active and highly selective for the preferential oxidation of CO. This work highlights the potential of combined surface science, theory, and catalyst studies for identifying new catalytic materials, which in this case led to the development of a promising single-site Pt 1 /Cu x O catalyst for the preferential oxidation of CO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Deactivated Bio-oil Hydrotreating Catalysts

Deactivation of bio-oil hydrotreating catalysts remains a significant challenge because of the poor quality of pyrolysis bio-oil input for hydrotreating and understanding their deactivation mode is critical to developing improved catalysts and processes. In this research, we developed an understanding of the deactivation of two-step bio-oil hydrotreating catalysts (sulfided Ru/C and sulfided CoMo/C) through detailed characterization of the catalysts using various complimentary analytical techniques. Severe fouling of both catalysts by carbonaceous species was the major form of deactivation, which is consistent with the significant loss of surface area and pore volume of both deactivated catalysts and the significant increase of the bulk density. Further analysis of the carbonaceous species by thermogravimetric analysis and x-ray photoelectron spectroscopy indicated that the carbonaceous species was formed by condensation reaction of active species such as sugars and sugar derivatives (aldehydes and ketones) in bio-oil feedstock during bio-oil hydrotreating under the conditions and catalysts used. Microscopy results did not show metal sintering of the Ru/C catalyst. However, X-ray diffraction indicated a probable transformation of the highly-active CoMoS phase in the sulfided CoMo/C catalyst to Co8S9 and MoS2 phase with low activity. Loss of the active site by transport of inorganic elements from the bio-oil and the reactor construction material onto the catalyst surface also might be a cause of deactivation as indicated by elemental analysis of spent catalysts.

bio-oil hydrotreating↗

Characterization of MoVTeNbO x catalysts during oxidation reactions using in situ/operando techniques: A review

The domestic fossil feedstock in recent years is shifting towards light hydrocarbons due to abundance of shale gas from hydraulic fracturing. This shift induces a need for greater flexibility in both new and existing processing plants to produce consumer products (polymers, paints, lubricants, etc.) from new feedstocks. The oxidative catalytic reactions operate at milder conditions than the processing of feedstocks through steam cracking. The conversion of light feedstocks (C3 and shorter hydrocarbons) to high value chemicals through highly selective catalysts in the presence of oxygen plays a crucial role in eliminating wastes, reducing greenhouse gas emissions and lowering market prices. Among all catalysts for light hydrocarbon processing through oxidation reactions, bulk mixed metal oxides such as MoVTe(Sb)NbO x catalysts are the most promising due to their performance under favorable reaction conditions (temperature, pressure, etc). Here, state-of-the-art in situ/operando techniques along with transient kinetics can revolutionize the development of catalysts by providing information about the nature of active sites, intermediates and kinetics under realistic industrial conditions. Only through detailed understanding of these catalyst behaviors can new synthesis methods be developed that will improve reactivity, selectivity and lifetimes of these catalysts. In this review, dynamic changes of this mixed oxide catalyst during the reaction (such as changes in surface composition, oxidation states, acidity, etc) are discussed mainly from knowledge and insights obtained from these in situ/operando approaches. The most common oxidation reactions driven by the MoVTeNbO x catalysts and studied under operando/in situ conditions to be discussed here are: (1) oxidative dehydrogenation of light alkanes (ethane and propane), (2) propane ammoxidation to acrylonitrile and (3) selective oxidation of propane to acrylic acid.

03 NATURAL GAS↗

Estimating Precommercial Heterogeneous Catalyst Price: A Simple Step-Based Method

Developers of novel catalysts often have limited access to information on the costs of their catalytic materials. The R&D and commercialization decisions made by these researchers would benefit from cost estimates that are accurate and directly comparable to the prices of incumbent catalytic materials, but developing such estimates requires detailed knowledge of industrial synthesis methods and their costs. In order to address one critical part of this need for cost information, namely, the capital and operating costs of using catalyst manufacturing process equipment, a simple and researcher-accessible 'step method' is described herein. This method is based on the estimating techniques that contract manufacturers of industrial catalysts use to develop price quotes for their services. It allows the development of an estimate of catalyst synthesis costs by selection of individual processing steps from a list. Data and methods to allow estimation of processing cost via the step method are provided for synthesis quantities of 1-1000 tons. Price estimates for three example materials, including Pt/C, Ni/Al 2 O 3 , and fluid catalytic cracking catalysts, are described in detail and shown to compare favorably (within +/-20%) with market prices for those materials. Lastly, the step method is placed in the context of a forthcoming free and publicly available catalyst cost estimation tool that will incorporate raw materials pricing, dedicated catalyst plants for higher-volume syntheses, spent catalyst value, and other features.

09 BIOMASS FUELS↗

Development of a reaction cell for in-situ/operando studies of surface of a catalyst under a reaction condition and during catalysis

Tracking surface chemistry of a catalyst during catalysis is significant for fundamental understanding of catalytic performance of the catalyst since it allows for establishing an intrinsic correlation between surface chemistry of a catalyst at its working status and its corresponding catalytic performance. Ambient pressure X-ray photoelectron spectroscopy can be used for in-situ studies of surfaces of different materials or devices in a gas. To simulate the gaseous environment of a catalyst in a fixed-bed a flowing gaseous environment of reactants around the catalyst is necessary. Here, we report the development of a new flowing reaction cell for simulating in-situ study of a catalyst surface under a reaction condition in gas of one reactant or during catalysis in a mixture of reactants of a catalytic reaction. The homemade reaction cell is installed in a high vacuum (HV) or ultrahigh vacuum (UHV) environment of a chamber. The flowing gas in the reaction cell is separated from the HV or UHV environment through well sealings at three interfaces between the reaction cell and X-ray window, sample door and aperture of front cone of an energy analyzer. Catalyst in the cell is heated through infrared laser beam introduced through a fiber optics interfaced with the reaction cell through a homemade feedthrough. The highly localized heating on the sample holder and Au-passivated internal surface of the reaction cell effectively minimizes any unwanted reactions potentially catalyzed by the reaction cell. The incorporated laser heating allows a fast heating and a high thermal stability of the sample at a high temperature. With this cell, a catalyst at 800 °C in a flowing gas can be tracked readily.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nonclassical Strong Metal–Support Interactions for Enhanced Catalysis

Strong metal–support interaction (SMSI), which encompasses reversible encapsulation and de-encapsulation and modulation of surface adsorption properties, imposes great impacts on the performance of heterogeneous catalysts. Recent development of SMSI has surpassed the prototypical encapsulated Pt-TiO 2 catalyst, affording a series of conceptually novel and practically advantageous catalytic systems. Here, in this work, we provide our perspective on recent progress in nonclassical SMSIs for enhanced catalysis. Unravelling the structural complexity of SMSI necessitates the combination of multiple characterization techniques at different scales. Synthesis strategies leveraging chemical, photonic, and mechanochemical driving forces further expand the definition and application scope of SMSI. Exquisite structure engineering permits elucidation of the interface, entropy, and size effect on the geometric and electronic characteristics. Materials innovation places the atomically thin two-dimensional materials at the forefront of interfacial active site control. A broader space is awaiting exploration, where exploitation of metal–support interactions brings compelling catalytic activity, selectivity, and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗