Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A Novel Synthesis Route for Bimetallic CoCr–MCM-41 Catalysts with Higher Metal Loadings. Their Application in the High Yield, Selective Synthesis of Single-Wall Carbon Nanotubes

We present a study on CoCr-MCM-41 catalysts with stable nm-sized particles. The focus is their promoting effect on the synthesis of Single-Wall Carbon Nanotubes (SWNT). Bimetallic CoCr-MCM-41 catalysts were synthesized by combined grafting and incorporation of metals in the framework. This synthesis allowed an increase in the maximum metal loading in the MCM-41 framework while maintaining nm-sized Co particles stable in high-temperature reactive environments. The SWNT yield was increased by more than 100% from the Co-MCM-41 catalyst. Cobalt is responsible for SWNT nucleation. The role of chromium is to anchor small cobalt particles during reduction and prevent their sintering into large unreactive particles. A larger fraction of the cobalt in the bimetallic catalysts becomes available for the SWNT synthesis when compared to the monometallic one, leading to a significant yield increase. Another effect of the addition of Cr was a shift of the SWNT diameter distribution to smaller nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Catalytic Site Requirements for N2O Decomposition on Cu-, Co-, and Fe-SSZ-13 Zeolites

N2O decomposition is investigated on Cu, Co and Fe-exchanged SSZ-13 zeolite catalysts at relatively low metal loadings. The catalysts are synthesized by solution ion exchange, and subjected to X-ray diffraction (XRD), temperature-programed-reduction by H2 (H2-TPR), temperature-programed-reaction of N2O (N2O-TPR) coupled with in-situ transmission FTIR, and finally steady-state flow reaction tests. At low N2O pressures (< 0.05 kPa), all catalysts display pseudo first-order kinetics. From Arrhenius analysis, Cu and Fe-SSZ-13 display very different apparent activation energies but similar pre-exponential factors, suggesting their similar reaction mechanisms. N2O decomposition follows a dual-site mechanism, occurring on dimeric M-O-M sites in these catalysts, and O2 is formed by the combination of two O ad-atoms from two vicinal metal sites. Under low N2O pressure (0.05 kPa) and first-order kinetic regime, the reaction is limited by N-O cleavage on bare metal active sites. In comparison to Cu-SSZ-13, the much higher N2O decomposition rate over Fe-SSZ-13 is attributed to the much lower activation barriers for the N-O cleavage step. N2O decomposition occurs on isolated Co2+ ions in Co-SSZ-13. The rate-limiting step is N-O cleavage on an O-occupied Co site in the low-pressure first order kinetic regime. This single-site mechanism leads to much higher pre-exponential factors as compared to the dual-site mechanism. This beneficial factor for reaction rate enhancement, however, is compromised by the much higher activation barriers over this catalyst.

Lin, Fan↗

Catalytic conversion of alcohols to hydrocarbons with low benzene content

A method for converting an alcohol to a hydrocarbon fraction having a lowered benzene content, the method comprising: converting said alcohol to a hydrocarbon fraction by contacting said alcohol, under conditions suitable for converting said alcohol to said hydrocarbon fraction, with a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon fraction, and contacting said hydrocarbon fraction with a benzene alkylation catalyst, under conditions suitable for alkylating benzene, to form alkylated benzene product in said hydrocarbon fraction. Also described is a catalyst composition useful in the method, comprising a mixture of (i) a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon, and (ii) a benzene alkylation catalyst, in which (i) and (ii) may be in a mixed or separated state. A reactor for housing the catalyst and conducting the reaction is also described.

10 SYNTHETIC FUELS↗

Catalytic conversion of alcohols to hydrocarbons with low benzene content

A method for converting an alcohol to a hydrocarbon fraction having a lowered benzene content, the method comprising: converting said alcohol to a hydrocarbon fraction by contacting said alcohol, under conditions suitable for converting said alcohol to said hydrocarbon fraction, with a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon fraction, and contacting said hydrocarbon fraction with a benzene alkylation catalyst, under conditions suitable for alkylating benzene, to form alkylated benzene product in said hydrocarbon fraction. Also described is a catalyst composition useful in the method, comprising a mixture of (i) a metal-loaded zeolite catalyst catalytically active for converting said alcohol to said hydrocarbon, and (ii) a benzene alkylation catalyst, in which (i) and (ii) may be in a mixed or separated state. A reactor for housing the catalyst and conducting the reaction is also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Low-Platinum-Loading Effects in Fuel-Cell Catalyst Layers

The cathode catalyst layer within a proton-exchange-membrane fuel cell is the most complex and critical, yet least understood, layer within the cell. The exact method and equations for modeling this layer are still being revised and will be discussed in this paper, including a 0.8 reaction order, existence of Pt oxides, possible non-isopotential agglomerates, and the impact of a film resistance towards oxygen transport. While the former assumptions are relatively straightforward to understand and implement, the latter film resistance is shown to be critically important in explaining increased mass-transport limitations with low Pt-loading catalyst layers. Model results demonstrate agreement with experimental data that the increased oxygen flux and/or diffusion pathway through the film can substantially decrease performance. Also, some scale-up concepts from the agglomerate scale to the more macroscopic porous-electrode scale are discussed and the resulting optimization scenarios investigated.

30 DIRECT ENERGY CONVERSION↗

Catalytic conversion of alcohols having at least three carbon atoms to hydrocarbon blendstock

A method for producing a hydrocarbon blendstock, the method comprising contacting at least one saturated acyclic alcohol having at least three and up to ten carbon atoms with a metal-loaded zeolite catalyst at a temperature of at least 100°C and up to 550°C, wherein the metal is a positively-charged metal ion, and the metal-loaded zeolite catalyst is catalytically active for converting the alcohol to the hydrocarbon blendstock, wherein the method directly produces a hydrocarbon blendstock having less than 1 vol % ethylene and at least 35 vol % of hydrocarbon compounds containing at least eight carbon atoms.

09 BIOMASS FUELS↗

Catalytic conversion of alcohols having at least three carbon atoms to hydrocarbon blendstock

A method for producing a hydrocarbon blendstock, the method comprising contacting at least one saturated acyclic alcohol having at least three and up to ten carbon atoms with a metal-loaded zeolite catalyst at a temperature of at least 100.degree. C. and up to 550.degree. C., wherein the metal is a positively-charged metal ion, and the metal-loaded zeolite catalyst is catalytically active for converting the alcohol to the hydrocarbon blendstock, wherein the method directly produces a hydrocarbon blendstock having less than 1 vol % ethylene and at least 35 vol % of hydrocarbon compounds containing at least eight carbon atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

One-step production of renewable adipic acid esters from mucic acid over an Ir–ReO x /C catalyst with low Ir loading

The production of adipic acid, a large-volume platform chemical, from biomass represents a petroleum-free route to manufacturing nylon and other polymers more sustainably. In this study, a one-step conversion of bioderived mucic acid to adipates is reported over a heterogeneous, bifunctional Ir–ReO x /C catalyst via deoxydehydration (DODH) and catalytic transfer hydrogenation (CTH) using isopropanol as a green solvent and reductant. With very low Ir content (0.05 wt%), the catalyst provides a low-cost option for the tandem DODH–CTH process, while still enabling reuse and regeneration for at least five cycles. The reported catalytic system generates adipates in good yield (63%) without the need for additives (acids or halogens) or high pressure H 2 . Through model reactions and spectroscopic analyses, a bifunctional DODH–CTH mechanism was supported, with the Re VI/IV redox pair as the active DODH species and Ir0 saturating the dialkene intermediate via CTH. Thermal treatment in catalyst preparation and regeneration was optimized to limit metal leaching while maintaining good activity. Further, the present work outlines a one-step deoxygenation of an aldaric acid substrate from biomass using a bimetallic catalyst of low noble metal content to an important monomer for the polymer industry. This system facilitates use in future syntheses of sustainable chemicals from renewable oxygenates where the catalyst is reusable and affordable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zeolitic catalytic conversion of alochols to hydrocarbons

A method for converting an alcohol to a hydrocarbon, the method comprising contacting said alcohol with a metal-loaded zeolite catalyst at a temperature of at least 100.degree. C. and up to 550.degree. C., wherein said alcohol can be produced by a fermentation process, said metal is a positively-charged metal ion, and said metal-loaded zeolite catalyst is catalytically active for converting said alcohol to said hydrocarbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zeolitic catalytic conversion of alcohols to hydrocarbons

A method for converting an alcohol to a hydrocarbon, the method comprising contacting said alcohol with a metal-loaded zeolite catalyst at a temperature of at least 100.degree. C. and up to 550.degree. C., wherein said alcohol can be produced by a fermentation process, said metal is a positively-charged metal ion, and said metal-loaded zeolite catalyst is catalytically active for converting said alcohol to said hydrocarbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zeolitic catalytic conversion of alcohols to hydrocarbons

A method for converting an alcohol to a hydrocarbon, the method comprising contacting said alcohol with a metal-loaded zeolite catalyst at a temperature of at least 100° C. and up to 550° C., wherein said alcohol can be produced by a fermentation process, said metal is a positively-charged metal ion, and said metal-loaded zeolite catalyst is catalytically active for converting said alcohol to said hydrocarbon.

Narula, Chaitanya K.↗

Active and stable carbon nanotube/nanoparticle composite electrocatalyst for oxygen reduction

Nanostructured carbon-based materials, such as nitrogen-doped carbon nanotube arrays, Co 3 O 4 /nitrogen-doped graphene hybrids and carbon nanotube–graphene complexes have shown respectable oxygen reduction reaction activity in alkaline media. Although certainly promising, the performance of these materials does not yet warrant implementation in the energy conversion/storage devices utilizing basic electrolytes, for example, alkaline fuel cells, metal-air batteries and certain electrolysers. Here we demonstrate a new type of nitrogen doped carbon nanotube/nanoparticle composite oxygen reduction reaction electrocatalyst obtained from iron acetate as an iron precursor and from cyanamide as a nitrogen and carbon nanotube precursor in a simple, scalable and single-step method. The composite has the highest oxygen reduction reaction activity in alkaline media of any non-precious metal catalysts. When used at a sufficiently high loading, this catalyst also outperforms the most active platinum-based catalysts.

36 MATERIALS SCIENCE↗

In Situ Elucidation of the Active State of Co–CeO x Catalysts in the Dry Reforming of Methane: The Important Role of the Reducible Oxide Support and Interactions with Cobalt

The activation of methane and its dry reforming with CO 2 was systematically studied over a series (2–30 wt %) of Co (~5 nm in size) loaded CeO 2 catalysts, with an effort to elucidate the interplay between Co and CeO 2 during the catalytic process using in situ methods. The results of in situ time-resolved X-ray diffraction (TR-XRD) show a strong interaction of methane with the CoOx–CeO 2 systems at temperatures between 200 and 350 °C. The hydrogen produced by the dissociation of C–H bonds in methane leads to a full reduction of Co oxide, Co 3 O 4 → CoO → Co, and a partial reduction of ceria with the formation of some Ce 3+ . Upon the addition of CO 2 , a catalytic cycle for dry reforming of methane (DRM) was achieved on the CoOx–CeO 2 powder catalysts at temperatures below 500 °C. A 10 wt % Co–CeO 2 catalyst was found to possess the best catalytic activity among various cobalt loading catalysts, and it exhibits a desirable stability for the DRM with a minimal effect of carbon accumulation. The phase transitions and the nature of active components in the catalyst were investigated under reaction conditions by in situ time-resolved XRD and ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). These studies showed dynamic evolutions in the chemical composition of the catalysts under reaction conditions. CO 2 attenuated the reducing effects of methane. Under optimum CO- and H 2 -producing conditions, both XRD and AP-XPS indicated that the active phase involved a majority of metallic Co with a small amount of CoO, both supported on a partially reduced ceria (Ce 3+ /Ce 4+ ). Finally, we identified the importance of dispersing Co, anchoring it onto the ceria surface sites, and then utilizing the redox properties of CeO 2 for activating and then oxidatively converting methane while inhibiting coke formation. Furthermore, a synergistic effect between cobalt and ceria and likely the interfacial sitee are essential to successfully close the catalytic cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Iron loading effects in Fe/SSZ-13 NH3-SCR catalysts: nature of the Fe-ions and structure-function relationships

Using a traditional aqueous solution ion-exchange method under a protecting atmosphere of N2, a series of Fe/SSZ-13 catalysts with various Fe loadings were synthesized. UV-Vis, EPR and Mössbauer spectroscopies, coupled with temperature programmed reduction and desorption techniques, were used to probe the nature of the Fe sites. The major monomeric and dimeric Fe species are extra-framework [Fe(OH)2]+ and [HO-Fe-O-Fe-OH]2+. Larger oligomers with unknown nuclearity, poorly crystallized Fe2O3 particles, together with isolated Fe2+ ions, are minor Fe-containing moieties. Reaction rate and Fe loading correlations suggest that isolated Fe3+ ions are the active sites for standard SCR while the dimeric sites are the active centers for NO oxidation. NH3 oxidation, on the other hand, is catalyzed by sites with higher nuclearity. A low-temperature standard SCR reaction network is proposed that includes redox cycling of both monomeric and dimeric Fe species, for SCR and NO2 generation, respectively. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Program for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

Environmental Molecular Sciences Laboratory↗

Carbon nanodot precursors enable ultrahigh-loading copper single-atom catalysts for oxygen reduction reaction

Single-atom catalysts (SACs) have attracted significant attention in electrocatalysis due to their high metal utilization and tunable electronic structures; however, their practical implementation is often limited by poor atomic dispersion, low metal loadings (typically < 1 wt%), and insufficient anchoring of single metal atoms on catalyst supports. Herein, we report a simple and versatile strategy to synthesize copper single-atom catalysts (Cu-SACs) with ultrahigh metal loading using citric-acid-derived carbon nanodots as metal-capturing precursors. Through hydrothermal treatment followed by pyrolysis in the presence of urea, atomically dispersed copper atoms coordinated with nitrogen are incorporated into a carbon framework, achieving a Cu loading of up to 20 wt% while maintaining atomic dispersion. Notably, a significant fraction of the copper single atoms exists as Cu+–N2 coordination, which provides under-coordinated and catalytically active sites. The resulting Cu-SAC exhibits promising oxygen reduction reaction (ORR) activity in alkaline media, delivering a limiting current density comparable to that of commercial 20 wt% Pt/C with a predominant four-electron reduction pathway. Despite this high intrinsic activity, durability tests reveal gradual performance degradation under prolonged electrochemical operation, which is attributed to demetallation and aggregation of copper single atoms into metallic nanoparticles. These results demonstrate the potential of carbon nanodot-based platforms for synthesizing high-loading SACs, while underscoring the critical need to simultaneously control carbon porosity and metal–nitrogen coordination to enhance active-site accessibility and durability.

Sharma, Prakhar [University of Kentucky]↗