Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode coating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Emission properties of explosive field emission cathodes

The research results of the explosive field emission cathode plasma expansion velocity and the initial emission area in the planar diode configuration with cathodes made of graphite, stainless steel, polymer velvet, carbon coated, and carbon fiber (needle type) cathodes are presented. The experiments have been performed at the electron accelerator LIA-200 (200 kV, 100 ns, and 4 kA). The diode voltage has been varied from 28-225 kV, whereas the current density has been varied from 86-928 A/cm{sup 2} with 100 ns pulse duration. The experimentally obtained electron beam diode perveance has been compared with the 1 dimensional Child-Langmuir- law. It was found that initially only a part of the cathode take part in the emission process. The plasma expands at 1.7-5.2 cm/{mu}s for 4 mm anode-cathode gap for various cathode materials. It was found that the plasma expansion velocity increases with the decrease in the cathode diameter. At the beginning of the accelerating pulse, the entire cathode area participates in the electron emission process only for the multiple needle type carbon fiber cathode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impacts of the Conductive Networks on Solid‐State Battery Operation

The micromorphology of composite cathodes is known to play a vital role in determining all-solid-state battery (ASSB) performance. However, much of our current understanding is derived from empirical observations, lacking a deeper mechanistic foundation. The “rocking chair” concept of battery chemistry requires maintaining charge neutrality, emphasizing the necessity of examining electrode micromorphology from the perspective of conductive networks. This study systematically investigates the microscopic electrochemical impacts of conductive network micromorphology by varying the Li + -to-e − channel ratio in cathodes comprising LiNbO 3 -coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 , Li 6 PS 5 Cl, and carbon fibers. Utilizing multiscale synchrotron-based spectro-microscopy, we unravel that unbalanced Li + and e − conducting channels intensify charge polarization within active cathode particles and accelerate their degradation. A further model system with X-ray nano-tomography resolved e − and Li + channels indicates that spatially uniform and well-paired Li + and e − conducting channels are highly desirable as they could promote more uniform lithiation/delithiation, mitigating microscopic electrochemical polarization. Electrode-scale X-ray holotomography analysis reveals that the impact of conductive networks is particle-size-dependent, with smaller cathode particles being more significantly affected. These findings provide mechanistic insights into the interplay between conductive networks and all-solid-state battery operation, laying the groundwork for rational design and optimization of cathode architectures in future solid-state battery technologies.

36 MATERIALS SCIENCE↗

Structural and Electrochemical Characterization of Pure LiFePO 4 and Nanocomposite C- LiFePO 4 Cathodes for Lithium Ion Rechargeable Batteries

Pure lithium iron phosphate ( LiFePO 4 ) and carbon-coated LiFePO 4 (C- LiFePO 4 ) cathode materials were synthesized for Li-ion batteries. Structural and electrochemical properties of these materials were compared. X-ray diffraction revealed orthorhombic olivine structure. Micro-Raman scattering analysis indicates amorphous carbon, and TEM micrographs show carbon coating on LiFePO 4 particles. Ex situ Raman spectrum of C- LiFePO 4 at various stages of charging and discharging showed reversibility upon electrochemical cycling. The cyclic voltammograms of LiFePO 4 and C- LiFePO 4 showed only a pair of peaks corresponding to the anodic and cathodic reactions. The first discharge capacities were 63, 43, and 13 mAh/g for C/5, C/3, and C/2, respectively for LiFePO 4 where as in case of C- LiFePO 4 that were 163, 144, 118, and 70 mAh/g for C/5, C/3, C/2, and 1C, respectively. The capacity retention of pure LiFePO 4 was 69% after 25 cycles where as that of C- LiFePO 4 was around 97% after 50 cycles. These results indicate that the capacity and the rate capability improved significantly upon carbon coating.

Kumar, Arun↗

The 15 cm diameter ion thruster research

The startup reliability of a 15 cm diameter mercury bombardment ion thruster which employs a pulsed high voltage tickler electrode on the main and neutralizer cathodes is examined. Startup of the thruster is achieved 100% of the time on the main cathode and 98.7% of the time on the neutralizer cathode over a 3640 cycle test. The thruster was started from a 20 C initial condition and operated for an hour at a 600 mA beam current. An energy efficiency of 75% and a propellant utilization efficiency of 77% was achieved over the complete cycle. The effect of a single cusp magnetic field thruster length on its performance is discussed. Guidelines are formulated for the shaping of magnetic field lines in thrusters. A model describing double ion production in mercury discharges is presented. The production route is shown to occur through the single ionic ground state. Photographs of the interior of an operating-hollow cathode are presented. A cathode spot is shown to be present if the cathode is free of low work-function surfaces. The spot is observed if a low work-function oxide coating is applied to the cathode insert. Results show that low work-function oxide coatings tend to migrate during thruster operation.

Wilbur, P. J.↗

High-Performance High-Loading Lithium-Sulfur Batteries by Low Temperature Atomic Layer Deposition of Aluminum Oxide on Nanophase S Cathodes

This study examines the effects of nanophase S and surface coatings via atomic layer deposition (ALD) on high-loading sulfur cathodes for developing high-performance and high-energy lithium-sulfur (Li-S) batteries. It is first verified that ball milling is an effective and facile route for nanoengineering microsized S powders and the resultant nanoscale S particles exhibit better performance. Using these ball milled nanoscale S cathodes, it is found that ALD Al2O3 performed at 50 degrees C yields deposits that evolve with ALD cycles from dispersed nanoparticles, to porous, connected films, and finally to dense and continuous films. Moreover, this low temperature ALD process suppresses S loss by sublimation. The ALD Al2O3 greatly improves sulfur cathode sustainable capacity and Coulombic efficiency. This study postulates two different mechanisms underlying the effects of ALD Al2O3 surface coatings depending on their morphology. ALD Al2O3 nanoparticles dispersed on the sulfur surface mainly function to adsorb polysulfides, thereby inhibiting S shuttling and improving sustainable capacity and Coulombic efficiency. By contrast, ALD Al2O3 films behave as a physical barrier to prevent polysulfides from contacting the liquid electrolyte and dissolving. The dispersed Al2O3 nanoparticles improve both sustainable capacity and Coulombic efficiency while the closed Al2O3 films improve Coulombic efficiency while decreasing the capacity

25 ENERGY STORAGE↗

Atomic-scale constituting stable interface for improved LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathodes of lithium-ion batteries

Ascribed to their higher capacity and lower cost compared to conventional LiCoO 2 , the Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) is now considered as one promising cathode for lithium-ion batteries (LIBs). However, it still suffers from some evident performance degradation, especially under high cutoff voltages (i.e., >4.3 V versus Li/Li + ). The performance degradation typically is exhibited as capacity fading and voltage drop, mainly originating from an instable interface between the NMC622 and electrolyte as well as the evolution of the NMC structure. To improve the interfacial and structural stability of NMC cathodes, herein we deposited an ultrathin layer of Al 2 O 3 coatings (<5 nm) conformally over NMC622 composite electrodes directly using atomic layer deposition (ALD). It was found that, under different upper cutoff voltages (4.3, 4.5, and 4.7 V), the ALD Al 2 O 3 coatings enable enhanced performance of NMC622 cathodes with better cyclability and higher capacity. Particularly, the beneficial effects of the ALD Al 2 O 3 coatings are more remarkable at higher upper cutoff voltages (4.5 and 4.7 V). Furthermore, the ALD coatings can significantly improve the rate capability of NMC622. To this end, we utilized a suite of characterization tools and performed a series of electrochemical tests to clarify the effects of the ALD Al 2 O 3 coatings. This study revealed that the beneficial effects of the Al 2 O 3 ALD coatings are multiple: (i) serving as an artificial layer of solid electrolyte interphase to mitigate undesirable interfacial reactions; (ii) acting as a physical barrier to inhibit metal dissolution of NMC; and (iii) forming a reinforced networked overcoating to boost the mechanical integrity of NMC cathodes. This study is favorable for designing high-performance NMC cathodes.

25 ENERGY STORAGE↗

Thermal protection of H13 steel by growth of (TiAl)N films by PAPVD pulsed arc technique

(TiAl)N Films were grown on H13 steel by a plasma assisted repetitive pulsed arc discharge. To grow the coatings, a TiAl sintered cathode was used, 50% Ti-50% Al. The deposition system consists of a reaction chamber with two electrodes placed face to face. A pulsed power supply, which allows for control of parameters like time active arc, time between arcs, arc energy, and others, is used to generate the discharge. Thermal changes were carried out on H13 steel before and after growing the (TiAl)N films. X-ray diffraction (XRD) was employed to study the coatings, observing the H13 steel and (TiAl)N oxidation temperature. Morphological characteristics were analyzed by means of an Atomic Force Microscopy (AFM). Scanning electron microscopy (SEM) revealed the surface chemical composition of the films and morphological details of the samples.

36 MATERIALS SCIENCE↗

Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes

High power density and longevity are required to commercialize solid oxide fuel cells for vehicular applications. In this work, electrochemical durability of high-performance metal-supported solid oxide fuel cells (MS-SOFCs) with infiltrated catalysts is investigated. Durability screening of various cathode and anode compositions is conducted. The Pr 6 O 11 cathode and SDCN 40 (40 vol% Ni-60 vol% SDC) anode are selected due to preferential tradeoff between performance and durability. X-ray diffraction indicates the catalyst phases are stable after prolonged thermal annealing. Electrochemical impedance and scanning electron microscopy analyses show that the evolution of SDCN40 is minimal, and coarsening and Cr poisoning of the Pr 6 O 11 catalyst are the dominant degradation mechanisms. These degradation mechanisms are addressed by implementing three additional fabrication steps: (1) preoxidation of the metal support, (2) deposition of thin and protective atomic layer deposition (ALD) coatings throughout the cathode-side electrode and support, and (3) in situ pre-coarsening of the catalysts. A favorable tradeoff is achieved: the combination of the three fabrication steps reduces degradation rate at 0.7 V and 700 °C by two orders of magnitude to 2.3% kh -1 , while sacrificing 35% of initial power density. The catalyst pre-coarsening step is primarily responsible for the loss of performance.

25 ENERGY STORAGE↗

Thermionic cooling with functionalized carbon nanotube thin films

A large thermionic cooling effect is reported. Temperature reduction as much as 81 °C has been observed on a functionalized carbon nanotubes (CNTs) cathode surface. This cathode utilizes a thin coating of low work function barium strontium oxide emissive materials on top of the CNTs to lower the surface work function. This, combined with the field effect induced by the CNTs, results in an even lower effective work function, and thus strong thermionic emission. Strong thermionic emission is the underlying reason for the large cooling effect observed, and the largest emission current in this study is around 160 mA on a 0.0727 cm{sup 2} emitting surface at around 995 °C. Multiple samples were used in studying thermionic mission at cathode temperature ranging between 750 °C and 1100 °C, and in establishing correlation between the cooling effect and the emission current. Details of the cooling effect measurement are provided, and the measurement results show a clear linear dependence of temperature drop on thermionic emission current. The possible implication of this linear dependence is also discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation on structure and properties of arc-evaporated HfAlN hard coatings

HfAlN hard coatings were synthesized by cathodic arc evaporation from Hf{sub 0.75}Al{sub 0.25} targets at different bias voltages and N{sub 2} pressures. Structural investigations by x-ray diffraction (XRD) revealed the formation of a face-centered cubic (fcc) structure with a change in the preferred orientation depending on the energetic growth conditions. This change in the crystal structure did not significantly influence the mechanical properties, e.g., hardness, where values ranging from 24 to 26 GPa were measured. The obtained fcc phase is stable up to 1000 deg. C as no significant changes in the crystal structure could be observed after annealing in vacuum. Similar experiments in ambient air and subsequent analysis of the coatings by XRD and Raman spectroscopy revealed an onset temperature for oxidation in the range of 700-800 deg. C and the formation of monoclinic HfO{sub 2} as the dominating oxide phase. Ball-on-disk tests at different temperatures were performed in order to evaluate the tribological properties. The coefficient of friction ranged from 0.8 to 1.2 depending on the testing temperature while the best wear performance was obtained in the temperature range of 300-500 deg. C.

36 MATERIALS SCIENCE↗

Interphase Engineering Enabled by Using a Separator with Electrochemically Active Carbazole Polymers for Lithium-Ion Batteries

Separators are generally considered inert components in lithium-ion batteries. In the past, some electroactive polymers have been successfully applied in separator modifications for overcharge protection or as acid scavengers. This study highlights the first use of two “electroactive” carbazole polymers (copolymer 9-phenyl-9H-carbazole-phenyl [PCP] and poly(9-vinylcarbazole) [PVC]), which were each applied separately as coatings on the cathode-facing side of commercial Celgard 2325 separators, respectively, to enhance the cycling performance of 0.3Li 2 MnO 3 ·0.7LiMn 0.5 Ni 0.5 O 2 //graphite (LMR-NM//Gr) full cells through interphase engineering. The team observed an irreversible polymer oxidation process of the carbazole-functionalized polymers—occurring only during the first charge—for the modified separator cells, and the results were confirmed by dQ/dV analysis, cyclic voltammetry measurements, and nuclear magnetic resonance characterizations. During this oxidation, carbazole polymers participate in the process of interphase formation, contributing to the improved cycling performance of LMR-NM//Gr batteries. Particularly, oxidation takes place at voltages of ~4.0 and ~3.5 V when PCP and PVC are used as separator coatings, which is highly irreversible. Further postmortem examinations suggest that the improvements using these modified separators arise from the formation of higher-quality and more inorganic SEI, as well as the beneficial CEI enriched in LixPOyFz. These interphases effectively inhibit the crosstalk effect by reducing TM dissolution.

carbazole↗

Atomic layer deposition of lithium zirconium oxides for the improved performance of lithium-ion batteries

Recently there has been increasing interest to develop lithium-containing films as solid-state electrolytes or surface coatings for lithium-ion batteries (LIBs) and related systems. Here, in this study, we for the first time investigated the thin film growth of lithium zirconium oxides (Li x Zr y O or LZOs) through combining two individual atomic layer deposition (ALD) processes of ZrO 2 and LiOH, i.e., sub-ALD of ZrO 2 and LiOH. We revealed that the hygroscopic nature of the LiOH component has a big impact on the growth of LZOs. We found that an increased temperature to 225 °C was more effective than an elongated purge to mitigate the adverse effects of physisorbed H 2 O. We further discovered that, during the resultant LZO super-ALD processes, the growth of sub-ALD LiOH has been promoted while the growth of sub-ALD ZrO 2 has been inhibited. In this study, a suite of instruments has been applied to characterize the LZO super-ALD processes and the resultant LZO films, including in situ quartz crystal microbalance (QCM), scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), atomic force microscopy (AFM), synchrotron-based X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Furthermore, we applied the resulting LZO films over LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathodes in LIBs and demonstrated that the LZO coating films could evidently improve the lithium-ion insertion and extraction rates of the NMC622 electrodes up to 3.4 and 2.6 times, respectively. The LZO-coated NMC622 cathodes exhibited much better performance than the uncoated NMC622 ones.

36 MATERIALS SCIENCE↗

Method for depositing an oxide coating

A metal oxide coating is plated onto a metal substrate at the cathode from an acid solution which contains an oxidizing agent. The process is particularly useful for producing solar panels. Conventional plating at the cathode avoids the presence of oxidizing agents. Coatings made in accordance with the invention are stable both at high temperatures and while under the influence of high photon flux in the visible range.

Mcdonald, G. E.↗

Composite Cathodes for Dual-Rate Li-Ion Batteries

Composite-material cathodes that enable Li-ion electrochemical cells and batteries to function at both high energy densities and high discharge rates are undergoing development. Until now, using commercially available cathode materials, it has been possible to construct cells that have either capability for high-rate discharge or capability to store energy at average or high density, but not both capabilities. However, both capabilities are needed in robotic, standby-power, and other applications that involve duty cycles that include long-duration, low-power portions and short-duration, high-power portions. The electrochemically active ingredients of the present developmental composite cathode materials are: carbon-coated LiFePO4, which has a specific charge capacity of about 160 mA h/g and has been used as a high-discharge-rate cathode material and Li[Li(0.17)Mn(0.58)Ni(0.25)]O2, which has a specific charge capacity of about 240 mA h/g and has been used as a high-energy-density cathode material. In preparation for fabricating the composite material cathode described, these electrochemically active ingredients are incorporated into two sub-composites: a mixture comprising 10 weight percent of poly(vinylidine fluoride); 10 weight percent of carbon and 80 weight percent of carbon coated LiFePO4; and, a mixture comprising 10 weight percent of PVDF, and 80 weight percent of Li[Li(0.17)Mn(0.58)Ni(0.25)]O2. In the fabrication process, these mixtures are spray-deposited onto an aluminum current collector. Electrochemical tests performed thus far have shown that better charge/discharge performance is obtained when either 1) each mixture is sprayed on a separate area of the current collector or (2) the mixtures are deposited sequentially (in contradistinction to simultaneously) on the same current-collector area so that the resulting composite cathode material consists of two different sub-composite layers.

Whitacre, Jay↗

Transferring Liquid Metal to form a Hybrid Solid Electrolyte via a Wettability-Tuning Technology for Lithium-Metal Anodes

Integrating solid-state electrolyte (SSE) into Li-metal anodes has demonstrated great promise to unleash the high energy density of rechargeable Li-metal batteries. However, fabricating a highly cyclable SSE/Li-metal anode remains a major challenge because the densification of the SSE is usually incompatible with the reactive Li metal. Here, a liquid-metal-derived hybrid solid electrolyte (HSE) is proposed, and a facile transfer technology to construct an artificial HSE on the Li metal is reported. By tuning the wettability of the transfer substrates, electron- and ion-conductive liquid metal is sandwiched between electron-insulating and ion-conductive LiF and oxides to form the HSE. The transfer technology renders the HSE continuous, dense, and uniform. The HSE, having high ion transport, electron shut-off, and mechanical strength, makes the composite anode deliver excellent cyclability for over 4000 h at 0.5 mA cm(-2) and 1 mAh cm(-2) in a symmetrical cell. When pairing with LiFePO4 and sulfur cathodes, the HSE-coated Li metal dramatically enhances the performance of full cells. Therefore, this work demonstrates that tuning the interfacial wetting properties provides an alternate approach to build a robust solid electrolyte, which enables highly efficient Li-metal anodes.

li-metal anodes↗