Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Reactive magnetron sputtering of Cu{sub 2}O: Dependence on oxygen pressure and interface formation with indium tin oxide

Thin films of copper oxides were prepared by reactive magnetron sputtering and structural, morphological, chemical, and electronic properties were analyzed using x-ray diffraction, atomic force microscopy, in situ photoelectron spectroscopy, and electrical resistance measurements. The deposition conditions for preparation of Cu(I)-oxide (Cu{sub 2}O) are identified. In addition, the interface formation between Cu{sub 2}O and Sn-doped In{sub 2}O{sub 3} (ITO) was studied by stepwise deposition of Cu{sub 2}O onto ITO and vice versa. A type II (staggered) band alignment with a valence band offset {Delta}E{sub VB} 2.1-2.6 eV depending on interface preparation is observed. The band alignment explains the nonrectifying behavior of p-Cu{sub 2}O/n-ITO junctions, which have been investigated for thin film solar cells.

36 MATERIALS SCIENCE↗

A Coherently Strained Monoclinic [111]PbTiO 3 Film Exhibiting Zero Poisson's Ratio State

Abstract [111]‐Oriented perovskite oxide films exhibit unique interfacial and symmetry breaking effects, which are promising for novel quantum materials as topological insulators and polar metals. However, due to strong polar mismatch and complex structural reconstructions on (111) surfaces/interfaces, it is still challenging to grow high quality [111] perovskite heterostructures, let alone explore the as‐resultant physical properties. Here, the fabrication of ultrathin PbTiO 3 films grown on a SrTiO 3 (111) substrate with atomically defined surfaces, by pulsed laser deposition, is reported. High‐resolution scanning transmission electron microscopy and X‐ray diffraction reveal that the as‐grown [111]PbTiO 3 films are coherent with the substrate and compressively strained along all in‐plane directions. In contrast, the out‐of‐plane lattices are almost unchanged compared with that of bulk PbTiO 3 , resulting in a 4% contraction in unit cell volume and a nearly zero Poisson's ratio. Ferroelectric displacement mapping reveals a monoclinic distortion within the compressed [111]PbTiO 3 , with a polarization larger than 50 µC cm −2 . The present findings, as further corroborated by phase field simulations and first principle calculations, differ significantly from the common [001]‐oriented films. Fabricating oxide films through [111] epitaxy may facilitate the formation of new phase components and exploration of novel physical properties for future electronic nanodevices.

Tang, Yunlong↗

Effects of mixing energy on technological properties and hydration kinetics of grouting mortars

During slurry preparation, effects of certain phenomena on fluidity and hardening characteristics of cement-based grouts have been reported. Deterioration of fluidity and hardening will affect the slurry performance, quality of workmanship and result in subsequent structural defects. There has been little research conducted on the effects of mixing energy during slurry preparation which has focused on the reasons or mechanisms for changes in characteristic properties. This work describes and measures the effects of several mixing parameters on properties of grouting materials, such as fluidity, hardening characteristics, shrinkage, heat of hydration, ion elution and crystallographic structure using X-ray diffraction and SEM. The results indicate that long mixing processes cause deterioration in fluidity and setting properties. These observations can be explained by acceleration in hydration kinetics and changes in microstructures and subsequent changes in dispersion states due to different mixing durations.

36 MATERIALS SCIENCE↗

Crystal structure, microstructure and reducibility of LaNi{sub x}Co{sub 1-x}O{sub 3} and LaFe{sub x}Co{sub 1-x}O{sub 3} Perovskites (0<x<=0.5)

Nickel and iron substituted LaCoO{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 deg. C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo{sub 1-x}Ni{sub x}O{sub 3} perovskites (x>0.1) annealed at 900 deg. C are reduced to Co/Ni transition metal and La{sub 2}O{sub 3} via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo{sub 1-x}Ni{sub x}O{sub 3} annealed at 600 deg. C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} occurs by reduction of Co{sup 3+} to Co{sup 2+} prior to the Fe{sup 3+} ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites. - Graphical abstract: LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried La-Co/Ni(Fe)-citrates and by the Pechini method. The complete reduction of LaCo{sub 1-x}Ni{sub x}O{sub 3} with H{sub 2} proceeds to Co/Ni-metal and La{sub 2}O{sub 3}, while the interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} is not complete up to 700 deg. C. For LaCo{sub 1-x}Fe{sub x}O{sub 3}, the reaction proceeds by preferential oxidation of Co{sup 3+} to Co{sup 2+} without affecting Fe{sup 3+} ions.

36 MATERIALS SCIENCE↗

Carbon/lambda-MnO{sub 2} composites for supercapacitor electrodes

In the present work a composite of carbon with lambda-MnO{sub 2} have been synthesized by a simple two-step route. In the first step, to obtain LiMn{sub 2}O{sub 4}/carbon material, mesoporous activated carbon was impregnated with the solution of precursor metal salts and heated subsequently. As-prepared materials were acid treated which resulted in the formation of lambda-MnO{sub 2}/carbon. Physical properties, structure and specific surface area of electrode materials were studied by TEM, X-ray diffraction and nitrogen sorption measurements. Voltammetry cycling, galvanostatic charge/discharge and impedance spectroscopy measurements performed in two- and three-electrode cells have been applied in order to measure electrochemical parameters. TEM images confirmed well dispersed lambda-MnO{sub 2} particles on the surface of carbon material. The carbon in the composite plays an important role as the surface area enhancing component and a support of pseudocapacitive material. Furthermore, the through-connected porosity serves as a continuous pathway for electrolyte transport. A synergetic effect of the porous carbon framework and of the redox properties of the lambda-MnO{sub 2} is at the origin of improvement of specific capacitance values which has been observed for composites after delithiation. - Comparison of capacitance characteristics for initial carbon and synthesised composites for CB in 1 mol L{sup -1} Na{sub 2}SO{sub 4} solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and selective IR absorption properties of iminodiacetic-acid intercalated MgAl-layered double hydroxide

An MgAl-NO{sub 3}-layered double hydroxide (LDH) precursor has been prepared by a method involving separate nucleation and aging steps (SNAS). Reaction with iminodiacetic acid (IDA) under weakly acidic conditions led to the replacement of the interlayer nitrate anions by iminodiacetic acid anions. The product was characterized by XRD, FT-IR, TG-DTA, ICP, elemental analysis and SEM. The results show that the original interlayer nitrate anions of LDHs precursor were replaced by iminodiacetic acid anions and that the resulting intercalation product MgAl-IDA-LDH has an ordered crystalline structure. MgAl-IDA-LDH was mixed with low density polyethylene (LDPE) using a masterbatch method. LDPE films filled with MgAl-IDA-LDH showed a higher mid to far infrared absorption than films filled with MgAl-CO{sub 3}-LDH in the 7-25 {mu}m range, particularly in the key 9-11 {mu}m range required for application in agricultural plastic films. - Graphical abstract: Intercalation of iminodiacetic acid (IDA) anions in a MgAl-NO{sub 3}-layered double hydroxide host leads to an enhancement of its infrared absorbing ability for application in agricultural plastic films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and luminescence properties of Yb{sup 3+} and Er{sup 3+} doped KLa(WO{sub 4}){sub 2} nanoparticles

The luminescent nanocrystalline Yb{sup 3+} and Er{sup 3+} codoped KLa(WO{sub 4}){sub 2} has been prepared by Pechini method. X-ray diffraction and transmission electron microscope were used to study the structure of the obtained samples. The average grain size of these samples depended on the annealing temperature, increasing with the increase of the temperature. The cell parameters and the crystallite size of KYb{sub x}Er{sub 0.02}La{sub 0.98-x}(WO{sub 4}){sub 2} nanocrystalline decreased with the increase of x value. Luminescence studies showed that the intensity of upconversion emission of the Yb{sup 3+} and Er{sup 3+} codoped samples was much stronger than that of the Er{sup 3+} single doped samples (pumped by 980 nm LD). The upconversion emission mechanisms suggested that all the three bands of upconversion emissions were two-photon process. - Graphical abstract: Er{sup 3+} and Yb{sup 3+} codoped KLa(WO{sub 4}){sub 2} nanoparticles have been prepared by Pechini method. Luminescence studies showed that the intensity of upconversion emission of the Yb{sup 3+} and Er{sup 3+} codoped samples was much stronger than that of the Er{sup 3+} single doped samples (pumped by 980 nm LD), and the upconversion emission mechanisms suggested that all the three bands of upconversion emissions were two-photon process.

36 MATERIALS SCIENCE↗

Role of surface hydroxyl groups in promoting room temperature CO sensing by Pd-modified nanocrystalline SnO{sub 2}

SnO{sub 2}/Pd nanocomposites were synthesized via sol-gel method followed by variable processing procedures. The materials are sensitive to CO gas in the concentration range 2-100 ppm at room operating temperature. It was shown that modification of nanocrystalline tin dioxide by Pd changes the temperature dependence of sensor response, decreasing the temperature of maximal signal. To understand the mechanism of room temperature CO sensitivity, a number of SnO{sub 2}/Pd materials were characterized by XRD, TEM, BET, XPS and TPR techniques. From the results of FTIR, impedance and sensing measurements under variable ambient conditions it was concluded that improvement in CO sensitivity for Pd-modified SnO{sub 2} is due to alteration of CO oxidation pathway. The reaction of CO with surface OH-groups at room temperature was proposed, the latter being more reactive than oxygen species due to the possible chain character of the reactions. It was proposed that Pd additive may initiate chain processes at room temperature. - Graphical abstract: Nanocrystalline SnO{sub 2} modified by PdO/Pd clusters exhibit high CO sensitivity at room temperature. An extensive study revealed surface OH-groups participation in CO oxidation on SnO{sub 2} leading to enhanced sensitivity at low operating temperature (25-150 {sup o}C). PdO/Pd clusters supposedly initiate a chain of CO reactions with surface hydroxyls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure distortion and magnetism in double perovskites Ca{sub 2-x}La{sub x}FeReO{sub 6} (0{<=}x{<=}0.8)

The crystal structure and magnetism of Ca{sub 2-x}La{sub x}FeReO{sub 6} (0{<=}x{<=}0.8) double perovskites have been investigated. The samples with low doping (x{<=}0.4) are found to crystallize with the monoclinic P2{sub 1}/n superstructure, while those in the high doping ones (x{>=}0.6) have orthorhombic Pbnm superstructure. With the increase of an La doping, the anti-site defects increases, giving rise to highly disordered samples at the Fe and Re positions. At the low doping region (x{<=}0.4), the compounds undergo a simultaneous structural and magnetic transition accompanying a slight increase of the Curie temperature. The increase of Curie temperature is discussed in terms of the structural change with doping. -- Graphical abstract: The crystal structures of Ca{sub 2-x}La{sub x}FeReO{sub 6} transform from monoclinic to orthorhombic; meanwhile, high degree of anti-site disorder was present at B/B' position, which promotes AFM correlations as an La increases. Display Omitted

36 MATERIALS SCIENCE↗

Effect of amine functionalization of spherical MCM-41 and SBA-15 on controlled drug release

MCM-41 and SBA-15 silica materials with spherical morphology and different particle sizes were synthesized and modified by post-synthesis method with 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, were carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N{sub 2} physisorption, thermal analysis, elemental analysis and FT-IR spectroscopy. Surface modification with amino groups resulted in high degree of ibuprofen loading and slow rate of release for MCM-41, whereas it was the opposite for SBA-15. The adsorbed drug content and the delivery rate can be predetermined by the choice of mesoporous material with the appropriate structural characteristics and surface functionality. -- Graphical Abstract: Ibuprofen delivery from the parent and amino-modified spherical MCM-41 materials with 100 nm (small) and 500 nm (large) particle sizes. Display Omitted Highlights: {yields} Spherical type MCM-41 and SBA-15 with different particle sizes were modified by APTES. {yields} Adsorption and release rate of ibuprofen were compared. {yields} High degree of ibuprofen loading, slow release rate for MCM-41, the opposite for SBA-15. {yields} MCM-41 with 100 nm particles was more stable and showed slower release rate

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of Pd-poly(N-vinyl-2-pyrrolidone)/KIT-5 nanocomposite as a polymer-inorganic hybrid catalyst for the Suzuki-Miyaura cross-coupling reaction

Composite poly(N-vinyl-2-pyrrolidone)/KIT-5 (PVP/KIT-5) was prepared by in situ polymerization method and used as a support for palladium nanoparticles obtained through the reduction of Pd(OAc){sub 2} by hydrazine hydrate. The physical and chemical properties of the catalyst were investigated by XRD, FT-IR, UV-vis, TG, BET, SEM, and TEM techniques. The catalytic performance of this novel heterogeneous catalyst was determined for the Suzuki-Miyaura cross-coupling reaction between aryl halides and phenylboronic acid in the presence of water at room temperature. The stability of the nanocomposite catalyst was excellent and could be reused 8 times without much loss of activity in the Suzuki-Miyaura cross-coupling reaction. - Graphical Abstract: Pd-poly(N-vinyl-2-pyrrolidone)/KIT-5 was prepared as an organic-inorganic hybrid catalyst for the Suzuki-Miyaura reaction. The stability of the catalyst was excellent and could be reused 8 times in the Suzuki-Miyaura reaction. Highlights: > Pd-poly(N-vinyl-2-pyrrolidone)/KIT-5 was prepared as a novel nanocomposite. > Nanocomposite was prepared based on a cage-type mesoporous system. > Catalyst showed excellent activity for Suzuki-Miyaura reaction in water. > Stability of the catalyst was excellent and could be reused 8 times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of zeolite from Italian coal fly ash: Differences in crystallization temperature using seawater instead of distilled water

In this study Italian coal fly ash was converted into several types of zeolite in laboratory experiments with temperatures of crystallization ranging from 35 up to 90 deg. C. Distilled and seawater were used during the hydrothermal synthesis process in separate experiments, after a pre-treatment fusion with NaOH. The results indicate that zeolites could be formed from different kind of Italian coal fly ash at low temperature of crystallization using both distilled and seawater. SEM data and the powder patterns of X-ray diffraction analysis show that faujasite, zeolite ZK-5 and sodalite were synthesized when using both distilled and seawater; zeolite A crystallized only using distilled water. In particular the experiments indicate that the synthesis of zeolite X and zeolite ZK-5 takes place at lower temperatures when using seawater (35 and 45 deg. C, respectively). The formation of sodalite is always competitive with zeolite X which shows a metastable behaviour at higher temperatures (70-90 deg. C). The chemical composition of the fly ash source could be responsible of the differences on the starting time of synthesized zeolite with distilled water, in any case our data show that the formation of specific zeolites takes place always at lower temperatures when using seawater.

36 MATERIALS SCIENCE↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Phase separation and exchange biasing in the ferromagnetic IV-VI semiconductor Ge{sub 1-x}Mn{sub x}Te

Ferromagnetic Ge{sub 1-x}Mn{sub x}Te grown by molecular beam epitaxy with Mn content of x{sub Mn}approx =0.5 is shown to exhibit a strong tendency for phase separation. At higher growth temperatures apart from the cubic Ge{sub 0.5}Mn{sub 0.5}Te, a hexagonal MnTe and a rhombohedral distorted Ge{sub 0.83}Mn{sub 0.17}Te phase is formed. This coexistence of antiferromagnetic MnTe and ferromagnetic Ge{sub 0.5}Mn{sub 0.5}Te results in magnetic exchange-bias effects.

36 MATERIALS SCIENCE↗

Enhanced Field Emission From The Gold- Polyaniline (Au-PANI) Nanocomposite

The gold-polyaniline nanocomposite was synthesized by electrochemical route in two steps. In the first step polyaniline film was deposited by cyclic voltammetry on the ITO coated glass substrate, and then synthesis of gold-polyaniline nanocomposite via chronoamperometry. The synthesized gold-polyaniline nanocomposite film was characterized using scanning electron microscope (SEM), X-ray diffraction (XRD), Ultra-violet spectroscopy (UV-vis) and Fourier Transform Infrared Spectrometry (FTIR). The SEM analysis shows well adherent gold nanoparticles on the surface of polyaniline nanofibers. The XRD and UV-Vis spectra indicate formation of gold nanoparticles. From the field emission studies, the value of the turn on field, corresponding to 1 nA emission current, is found to be 0.65 V/{mu}m and emission current density of 1 {mu}A/cm{sup 2} has been drawn at an applied field of 1.1 V/{mu}m. These values are observed to be superior than the reported ones. The field emission current stability investigated at 1 {mu}A over duration of more than four hours is found to be good. The observed field emission characteristics suggest the gold polyaniline nanocomposite as promising material for field emission based applications.

36 MATERIALS SCIENCE↗

Effect Of EDTA On Luminescence Property Of Eu{sup +3} Doped YPO{sub 4} Nanoparticles

Nanoparticles of Eu{sup 3+} doped YPO{sub 4} have been prepared using ethylene glycol (EG). Ethylene diamine tetra acetic acid (EDTA) is used as a complexing agent. X-ray diffraction results show that the nanoparticles are crystalline in tetragonal structure. Based on William-Hall relation, the effective crystallite size and strain developed in lattice are found to be 28 nm and 0.002, respectively. With the addition of EDTA, there is a slight shift towards the lower wavelength in emission peaks. Asymmetric ratio of electric to magnetic dipole transition intensities are found to decrease with addition of EDTA. Emission intensity decreases with EDTA because of decrease of particle size as well as decrease of number of Eu{sup 3+} activators per unit volume. These materials are dispersible in water, which may have potential biological applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Grinding Wear Behaviour of Stepped Austempered Ductile Iron as Media Material During Comminution of Iron Ore in Ball Mills

An attempt has been made to evaluate the suitability of austempered ductile iron (ADI) as media material for grinding iron ore in a ball mill. Spheroidal graphite (S.G) iron balls are austenitised at 900 deg. C for 60 minutes and given stepped austempering treatment at 280 deg. C for 30 minutes and 60 minutes followed by 380 deg. C for 60 minutes in each case. These materials are characterised by measuring hardness, analysing X-ray diffraction (X-RD), studying microstructure using optical and scanning electron microscope (SEM). Grinding wear behaviour of these materials was assessed for wear loss in wet condition at different pH value of the mineral slurry and found that the wear rate of grinding media material decreases with increase in pH of the slurry. The wear resistance of ADI balls were compared with forged En31 steel balls and found that the stepped austempered ductile iron is superior to forged En31 steel balls.

36 MATERIALS SCIENCE↗