Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Development of nickel-incorporated MCM-41–carbon composites and their application in nitrophenol reduction

MCM-41–carbon composites were obtained by soft-templating strategy by adding resorcinol and formaldehyde as carbon precursors during the synthesis of MCM-41. The synthesis of these composites was optimized until mesoporous MCM-41 domains remained highly ordered and the overall specific surface area and pore volume remained relatively high. The one-pot synthetic procedure was further extended to obtain the Ni-containing MCM-41–carbon composites using nickel nitrate as an additive. A homogeneous distribution of nickel nanoparticles in the composites was achieved by adding histidine to the reaction mixture, which was able to form a complex with nickel ion. Carbonization of organic components in the composites produced carbon that was responsible for in situ reduction of nickel(II) to metallic nickel (Ni0) at elevated temperatures, eliminating the post-synthesis reduction step carried out in the presence of hydrogen gas or other reducing agent. Furthermore, the resulting composites showed enhanced catalytic activity toward nitrophenol reduction obeying the zero-order kinetics. Three unique features of the resulting composites, namely mesoporous channels of MCM-41, carbon-induced in situ reduction of Ni ions to metallic Ni nanoparticles, and abundance of highly active Ni sites due to high dispersion of Ni0, make this strategy applicable for the synthesis of other transition metal-based catalysts. XRD and STEM analyses revealed a homogeneous distribution of nickel nanoparticles in the composites without significant distortion of their ordered mesoporosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of Beidellite/Polyaniline Production Conditions by Central Composite Design for Removal of Acid Yellow 194

In the adsorption process, the adsorbent structure and its interaction with wastewater are the main determinant of the process efficiency. For this reason, the correct selection of the production conditions for the produced adsorbents is critical. In this study, the reaction time and the concentration of acid, oxidant, substrate, and monomer were selected as independent variables which effect the structure of the polyaniline based composite material. These production variables of polyaniline/beidellite (PANI/BEI) composites were designed by response surface methodology (RSM). According to RSM, 46 different PANI/BEI composites were synthesized and were used as an adsorbent in the removal of acid yellow 194. Thus, the optimum PANI/BEI production conditions were determined. After the identification of the optimum PANI/BEI production conditions, the effect of adsorption conditions such as pH, mixing time, and dye concentration were studied by batch experiments. The maximum adsorption capacity was obtained as 123 (mg g{sup −1}) at the T = 25 °C, t = 24 h, pH 3, m{sub s} = 0.15 g adsorbent, V{sub s} = 50 ml dye solution, and ω = 200 rpm. The results presented in this study revealed that the central composite design is a suitable method to optimize the production conditions of PANI/BEI and the prepared PANI/BEI composites has an important potential as an adsorbent for the removal of metal-complex dyes such as AY194. In addition, the polymerization of aniline and the removal of dye were confirmed by different analytical techniques such as BET, XRD, SEM, and EDAX.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Latent map Gaussian processes for mixed variable metamodeling

Gaussian processes (GPs) are ubiquitously used in sciences and engineering as metamodels. Standard GPs, however, can only handle numerical or quantitative variables. Here we introduce latent map Gaussian processes (LMGPs) that inherit the attractive properties of GPs and are also applicable to mixed data which have both quantitative and qualitative inputs. The core idea behind LMGPs is to learn a continuous, low-dimensional latent space or manifold which encodes all qualitative inputs. To learn this manifold, we first assign a unique prior vector representation to each combination of qualitative inputs. We then use a low-rank linear map to project these priors on a manifold that characterizes the posterior representations. As the posteriors are quantitative, they can be directly used in any standard correlation function such as the Gaussian or Matern. Hence, the optimal map and the corresponding manifold, along with other hyperparameters of the correlation function, can be systematically learned via maximum likelihood estimation. Through a wide range of analytic and real-world examples, we demonstrate the advantages of LMGPs over state-of-the-art methods in terms of accuracy and versatility. In particular, we show that LMGPs can handle variable-length inputs, have an explainable neural network interpretation, and provide insights into how qualitative inputs affect the response or interact with each other. We also employ LMGPs in Bayesian optimization and illustrate that they can discover optimal compound compositions more efficiently than conventional methods that convert compositions to qualitative variables via manual featurization.

42 ENGINEERING↗

Design, characterization and shape recovery behavior of 3D/4D printed shape memory polymers (SMPs)

Shape memory polymers (SMPs) represent a paradigm shift in material science, uniquely capable of undergoing reversible shape transformations triggered by external stimuli, positioning them as pivotal in developing next-generation biomedical devices, aerospace components, and adaptive structures. Extensive research has been done on SMPs with a major focus on high-temperature programming methods, which can limit energy efficiency and applicability with temperature-sensitive materials. Additionally, while various SMP blends have demonstrated great potential, limited work has been done on the suitability for 3D printing these materials, particularly under high-strain and ambient temperature programming conditions. In this study, a three-component optimized SMP composition was evaluated by 3D printing via the Material Extrusion (MEX) technique and investigating its ambient temperature-programming behavior at high strains. The SMP formulation studied was a tailored blend of thermoplastic polyurethane (TPU), polycaprolactone (PCL), and an octadecane diol-based copolymer (OBC) that exhibits robust shape memory behavior, high strain tolerance, and efficient force generation. Rigorous thermal, mechanical, and shape recovery analyses, along with optimized printing parameters and consistent shape recovery rates of up to 90%, were achieved under dynamic mechanical analysis (DMA), even under ambient programming conditions. This work demonstrates the SMP composition’s potential for adaptive, self-deployable systems with 4D printing characteristics ideal for bio-inspired structures and artificial muscle fibers.

Sudan, Kavish [University of Louisville, KY]↗

Elucidating Compositional Differences in Halide Perovskites for Normal and Inverted Perovskite Solar Cells

Over the recent few years, extensive research efforts have shifted from normal (n-i-p) to inverted (p-i-n) perovskite solar cells (PSCs), owing to their promising efficiency and operational stability, enabled by low-temperature processing. Despite a fundamentally identical operation principle (only structurally inverted), the optimized perovskite compositions for normal and inverted PSCs differ significantly across the literature, suggesting an underlying design principle for perovskite composition. Here, we unveil the role of cesium cation in enhancing interfacial contact between the perovskite layer and the underlying hole-transporting layer (HTL) in inverted PSCs. Comprehensive in situ and device characterization reveal that cesium incorporation promotes the formation of initial nucleation seeds for heterogeneous nucleation at the perovskite/hydrophobic HTL interface, thereby improving their contact. The resulting compositional heterogeneity explains the focus of recent studies on resolving this issue. This study provides mechanistic insight into designing perovskite compositions to further enhance the performance and longevity of PSCs.

Park, Keonwoo↗

A step forward from high-entropy ceramics to compositionally complex ceramics: a new perspective

High-entropy ceramics (HECs) have quickly gained attention since 2015. To date, nearly all work has focused on five-component, equimolar compositions. This perspective article briefly reviews different families of HECs and selected properties. Following a couple of our most recent studies, we propose a step forward to expand HECs to compositionally-complex ceramics (CCCs) to include medium-entropy and/or non-equimolar compositions. Here, using defective fluorite and ordered pyrochlore oxides as two primary examples, we further consider the complexities of aliovalent cations and anion vacancies as well as ordered structures with two cation sublattices. Better thermally-insulating yet stiff CCCs have been found in non-equimolar compositions with optimal amounts of oxygen vacancies and in ordered pyrochlores with large size disorder; it is demonstrated that medium-entropy ceramics (MECs) can prevail over their high-entropy counterparts. The diversifying classes of CCCs provide even more possibilities than HECs to tailor the composition, defects, disorder/order, and consequently various properties.

36 MATERIALS SCIENCE↗

Separation of K + and Bi 3+ displacements in a Pb-free, monoclinic piezoelectric at the morphotropic phase boundary

The best piezoelectric properties of any perovskite oxide known are found in the solid solution of the relaxor Pb (Mg 1/3 Nb 2/3 )O 3 and ferroelectric PbTiO 3 . Despite its impressive properties, this system has limited analogy. We present the compositional exploration of the Pb-free analogue (1-x)(K 1/2 Bi 1/2 )(Mg 1/3 Nb 2/3 )O 3 -x(K 1/2 Bi 1/2 )TiO 3 (KBMN-KBT). We locate the morphotropic phase boundary between x = 0.86 and 0.88 changing from Cm to Pm symmetry and the optimally performing composition at x = 0.88. We report a piezoelectric figure of merit (d 33 *) of 192 pm V —1 from strain measurements. Diffraction methods reveal disordered displacements of K + and Bi 3+ which persist from the KBMN endmember through multiple changes in symmetry. Rearrangement of the Bi 3+ displacements along the uncommon [011] c direction drives the physical response. Ferroelectric, dielectric, and piezoresponse force microscopy are used to study the progression of physical properties through the MPB and attribute the mechanism to a polarization rotation. Taking account for local, short-range, and average structural features yield a balanced perspective on the structure and properties of this system, isolating the driving force within this system to the Bi 3+ bonding configuration. This work yields a strong analogy to the Pb-based analogue, and provides strategies for further optimization.

36 MATERIALS SCIENCE↗

Theory, Investigation and Stability of Cathode Electrocatalytic Activity

The main objective of this project is to systematically characterize the surface composition, morphology, and electro-catalytic properties of catalysts coated on LSCF, aiming to establish the scientific basis for rational design of high-performance cathodes by combining a porous backbone (such as LSCF) with a thin catalyst coating. The understanding gained will help us to optimize the composition and morphology of the catalyst layer and microstructure of the LSCF backbone for better performance.

30 DIRECT ENERGY CONVERSION↗

Trade-offs in sensitivity and sampling depth in bimodal atomic force microscopy and comparison to the trimodal case

This paper presents experiments on Nafion ® proton exchange membranes and numerical simulations illustrating the trade-offs between the optimization of compositional contrast and the modulation of tip indentation depth in bimodal atomic force microscopy (AFM). We focus on the original bimodal AFM method, which uses amplitude modulation to acquire the topography through the first cantilever eigenmode, and drives a higher eigenmode in open-loop to perform compositional mapping. This method is attractive due to its relative simplicity, robustness and commercial availability. We show that this technique offers the capability to modulate tip indentation depth, in addition to providing sample topography and material property contrast, although there are important competing effects between the optimization of sensitivity and the control of indentation depth, both of which strongly influence the contrast quality. Furthermore, we demonstrate that the two eigenmodes can be highly coupled in practice, especially when highly repulsive imaging conditions are used. Finally, we also offer a comparison with a previously reported trimodal AFM method, where the above competing effects are minimized.

36 MATERIALS SCIENCE↗

Development of a backfill material for LILW and HLW disposal galleries in the current Belgian geological disposal concept - 15374

In Belgium, it is planned to dispose of long-lived and high-level waste in an underground facility. After disposal of the waste, the galleries will be backfilled to provide stability to the galleries and to limit the amount of voids in the repository. To achieve those goals, the backfill material has to have a good flowability, a negligible bleeding, and a limited shrinkage. A limited grain size is also required to allow the injection of the backfill material. Despite the fact that the backfill supports the gallery lining, its strength must be low enough to enable the retrieval of the waste packages. The backfill material has to be chemically compatible with the Boom Clay and the waste packages. This means that it should not unduly perturb the clay or disposal packages. The thermal conductivity of the backfill material in the galleries containing high-level and thus heat-generating waste must be high enough to allow sufficient dissipation of the decay heat into the surrounding clay. Based on these objectives, material requirements were specified and the development of a backfill mixture was carried out. Initially, the mix composition was optimized in the laboratory. Thereafter, the backfill process of a gallery section was simulated. The investigations illustrate that this mixture can be transported via pipelines through the shaft and drifts and would fill completely the backfill sections in the galleries. Measurements of the porosity, the pore solution composition, the thermal material properties, and the strength illustrate the compliancies with the requirements and the feasibility of backfilling the disposal galleries. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Critical role of acceptor dopants in designing highly stable and compatible proton-conducting electrolytes for reversible solid oxide cells

Proton-conducting electrolytes are receiving increasing attention due to their high ionic conductivity at intermediate temperatures, enabling the operation of solid oxide cells with high energy efficiency at low cost. However, the effect of B-site dopants on the properties of doped barium hafnate-cerate electrolyte materials, especially in single cells under operating conditions, has not been systematically studied. Here we report our findings in the development of a series of proton-conducting electrolytes with a general formula of BaHf 0.1 Ce 0.7 R 0.2 O 3–δ (BHCR172, R = Yb, Er, Y, Gd, Sm). Here, the results reveal that electrical conductivity, ionic transference number, chemical stability against steam and CO 2 , and compatibility with NiO during sintering are all closely correlated with the dopant size. In particular, the reaction with NiO is found to strongly affect the properties of the electrolytes and hence cell performance. Among all tested compositions, BaHf 0.1 Ce 0.7 Yb 0.2 O 3–δ (BHCYb172) shows excellent chemical stability and minimal reactivity towards NiO, as predicted from density functional theory (DFT)-based calculations and confirmed by experimental results. In addition, proton-conducting reversible solid oxide cells (P-ReSOCs) based on the optimized electrolyte composition, BHCYb172, demonstrate exceptional performance and stability, achieving a remarkable peak power density of 1.74 W cm –2 (O 2 as the oxidant) at 600 °C in the fuel cell mode and a high current density of 2.0 A cm –2 at 1.3 V and 600 °C in the steam electrolysis mode while maintaining excellent durability for over 1000 h.

25 ENERGY STORAGE↗

Thermal Conductivity of SiC/Si Composites – Porting PNNL EMTA Code for Fusion Analyses

An existing modeling method, the EMTA (Eshelby-Mori-Tanaka approach) modeling approach [1], is applied to the study of SiC/SiC 2D woven composites for fusion reactor applications for the first time, to the best of our knowledge, with excellent results. We compare EMTA model results to existing thermal conductivity data for these materials and suggest that in the future this approach can be beneficial by providing us with tools to further optimize these composite materials for fusion energy applications since the EMTA method and code can address both thermal and mechanical properties with the same framework.

Henager, Charles H.↗

Synergetic Effects of Alcohol/Water Mixing on the Catalytic Reductive Fractionation of Poplar Wood

One of the foremost challenges in lignocellulose conversion encompasses the integration of effective lignin valorization in current carbohydrate-oriented biorefinery schemes. Catalytic reductive fractionation (CRF) of lignocellulose offers a technology to simultaneously produce lignin-derived platform chemicals and a carbohydrate-enriched pulp via the combined action of lignin solvolysis and metal-catalyzed hydrogenolysis. Herein, the solvent (composition) plays a crucial role. In this contribution, we study the influence of alcohol/water mixtures by processing poplar sawdust in varying MeOH/water and EtOH/water blends. The results show particular effects that strongly depend on the applied water concentration. Low water concentrations enhance the removal of lignin from the biomass, while the majority of the carbohydrates are left untouched (scenario A). Contrarily, high water concentrations favor the solubilization of both hemicellulose and lignin, resulting in a more pure cellulosic residue (scenario B). For both scenarios, an evaluation was made to determine the most optimal solvent composition, based on two earlier introduced empirical efficiency descriptors (denoted LFDE and LFFE). According to these measures, 30 (A) and 70 vol % water (B) showed to be the optimal balance for both MeOH/water and EtOH/water mixtures. This successful implementation of alcohol/water mixtures allows operation under milder processing conditions in comparison to pure alcohol solvents, which is advantageous from an industrial point of view.

09 BIOMASS FUELS↗

Smart culture medium optimization for recombinant protein production: Experimental, modeling, and AI/ML-driven strategies

Recombinant protein production (RPP) is central to biotechnology, where recombinant proteins are used as either end products or catalysts in the synthesis of chemicals, fuels, and materials. Among the major cost drivers, culture medium plays a pivotal role in determining protein yield and quality. This review presents a comprehensive perspective on the critical stages of “smart” culture medium optimization: planning, screening, modeling, optimization, and validation. In the planning stage, we examine the nutritional and energetic roles of medium components, including carbon, nitrogen, amino acids, salts, and trace metals, and their impacts on culture parameters such as pH, oxidative state, and osmolality. We highlight the variability in trace metal content due to water sources, culture vessels, and raw materials, which can substantially influence RPP. The screening stage covers Design of Experiments (DoE) approaches, assessing their theoretical basis, implementation, and limitations. For modeling, we describe methods that integrate experimental data to develop predictive models for smart medium formulation. Model-based optimization strategies can then be employed to select optimal media compositions for a given application. The validation stage aims to evaluate model predictions and provide feedback for model training and refinement. Finally, we survey mechanistic and artificial intelligence/machine learning (AI/ML)-driven models as integrated, transformational tools for predictive modeling of bioprocess conditions, nutrient availability, cellular metabolism, and protein quality, with the goal of optimizing culture media to enhance protein yields while reducing costs and environmental impact. We conclude by addressing the challenges of translating laboratory-scale medium optimization to industrial-scale settings and exploring future AI/ML-driven approaches that may overcome current bottlenecks and accelerate medium design for RPP. Overall, this review provides a unified framework for advancing smart medium design in RPP.

Artificial Intelligence/Machine Learning (AI/ML)↗

Development of high-speed reactive processing system for carbon fiber-reinforced polyamide-6 composite: In-situ anionic ring-opening polymerization

In order to manufacture carbon fiber-reinforced polyamide-6 (PA-6) composite, we optimized the reactive processing system. The in-situ anionic ring-opening polymerization of ε-caprolactam was utilized with proper catalyst and initiator for PA-6 matrix. The mechanical properties such as tensile strength, inter-laminar shear strength and compressive strength of the produced carbon fiber-reinforced PA-6 composite were measured, which were compared with the corresponding scanning electron microscope (SEM) images to investigate the polymer properties as well as the interfacial interaction between fiber and polymer matrix. Furthermore, kinetics of in-situ anionic ring-opening polymerization of ε-caprolactam will be discussed in the viewpoint of increasing manufacturing speed and interfacial bonding between PA-6 matrix and carbon fiber during polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The chemical composition of the sun from helioseismic and solar neutrino data

We perform a quantitative analysis of the solar composition problem by using a statistical approach that allows us to combine the information provided by helioseismic and solar neutrino data in an effective way. We include in our analysis the helioseismic determinations of the surface helium abundance and of the depth of the convective envelope, the measurements of the {sup 7}Be and {sup 8}B neutrino fluxes, and the sound speed profile inferred from helioseismic frequencies. We provide all the ingredients to describe how these quantities depend on the solar surface composition, different from the initial and internal composition due to the effects of diffusion and nuclear reactions, and to evaluate the (correlated) uncertainties in solar model predictions. We include error sources that are not traditionally considered such as those from inversion of helioseismic data. We, then, apply the proposed approach to infer the chemical composition of the Sun. Our result is that the opacity profile of the Sun is well constrained by the solar observational properties. In the context of a two-parameter analysis in which elements are grouped as volatiles (i.e., C, N, O, and Ne) and refractories (i.e., Mg, Si, S, and Fe), the optimal surface composition is found by increasing the abundance of volatiles by (45 ± 4)% and that of refractories by (19 ± 3)% with respect to the values provided by Asplund et al. (2009, ARA and A, 47, 481). This corresponds to the abundances ε{sub O} = 8.85 ± 0.01 and ε{sub Fe} = 7.52 ± 0.01, which are consistent at the ∼1σ level with those provided by Grevesse and Sauval (1998, SSRv, 85, 161). As an additional result of our analysis, we show that the best fit to the observational data is obtained with values of input parameters of the standard solar models (radiative opacities, gravitational settling rate, and the astrophysical factors S {sub 34} and S {sub 17}) that differ at the ∼1σ level from those presently adopted.

79 ASTRONOMY AND ASTROPHYSICS↗

Chemically Functionalized Plant Fibers and Carbon Nanotubes for High Compatibility and Reinforcement in Polylactic Acid (PLA) Composite

In this study, surface modification is used to improve the compatibility of Kenaf fibers (KFs) and multi-walled carbon nanotubes (MWCNTs) in a polylactic acid (PLA) matrix, as well as to enhance the mechanical properties. Through the use of a silane coupling agent, the KF is grafted with functional groups to generate a chemical bond with the PLA; the modified KF shows high compatibility in the PLA matrix. Compared to the bare PLA, the optimal KF/MWCNT/PLA composite (PC1F30-OX) shows increases of 58% in tensile strength, and 113% in impact strength. A small addition of MWCNTs (1 wt%) dramatically improves the antistatic ability by lowering the surface resistance to 3.47 GΩ. With the addition of hydrophilic KF into the PLA, the composite becomes much more environmentally friendly, and the biodegradation rate can be controlled by the amount of KF added. The addition of hydrophilic KF allowed the composite to accommodate more enzyme to hasten the biodegradation; almost complete decomposition occurred after 11 weeks.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Noble Gas Management: SBMOF 1 vs. NUCON Carbon

Pacific Northwest National Laboratory (PNNL), in collaboration with Flibe Energy, Inc., demonstrated the fabrication of metal organic frameworks (MOFs) into engineered beads to manage off-gases released from molten salt reactors. Among the many MOF options, SBMOF 1 was selected as an ideal sorbent to manage off-gases released from a molten salt reactor because its pore size is optimal. The SBMOF 1 was synthesized and fabricated into engineered particles using three different methods, with and without polymers. All the engineered particles were exposed to Co-60 radiation (1,000 kGy) to demonstrate their radiation stability. Single column breakthrough experiments were performed at different temperatures, activation conditions, flow rates, and off-gas compositions to optimize the Xe capacity at the breakthrough point and at saturation. The Xe loading in SBMOF 1 was compared with that of standard solid sorbent (Nucon carbon) under identical conditions. Based on the single column experiments, SBMOF 1 outperforms the Nucon carbon at all the temperatures and reduces the mass (to as little as 55%) of sorbent needed to achieve the same performance as carbon. The bed volume is also reduced, down to 48% of that of Nucon carbon, when the MOF is used. These results clearly demonstrate improvement in the amount of adsorbent needed and show a reduction in bed volume compared to traditional sorbent material.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗