Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Perovskite-Sensitized Upconversion under Operando Conditions

Perovskite-sensitized upconversion (UC) has resulted in near-infrared-to-visible UC at solar-relevant fluxes. However, the successful implementation of UC devices into operating solar cells will result in exposure to similar environmental stressors as for the commercial photovoltaics (PVs), mainly elevated temperatures, and continuous irradiation. In this article, we investigated the effects of these two stressors, heat and light, on the triplet generation process at the perovskite/rubrene interface. Following exposure to both stressors, local discrepancies across the upconversion device were discovered. Here, the first region showed changes to the morphology, and no detectable upconverted emission was observed. Through the combination of optical microscopy and spectroscopy, crystallization of the organic semiconductor layer, degradation of dibenzotetraphenylperiflanthene, and concurrent degradation of the perovskite sensitizer were found. These effects culminate in a reduction in both triplet generation and triplet–triplet annihilation. In the second region, no changes to the morphology were present and visible UC emission was observed following exposure to both stressors. To probe the triplet sensitization process at elevated temperatures, transient absorption spectroscopy was performed. The presence of the excited spin-triplet state of rubrene at 60 °C highlighted successful triplet generation even at elevated temperatures. This work emphasizes the challenges and continued potential for the integration of perovskite-sensitized UC into commercial photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Atomic resolution coherent x-ray imaging with physics-based phase retrieval

Coherent x-ray imaging and scattering from accelerator based sources such as synchrotrons continue to impact biology, medicine, technology, and materials science. Many synchrotrons around the world are currently undergoing major upgrades to increase their available coherent x-ray flux by approximately two orders of magnitude. The improvement of synchrotrons may enable imaging of materials in operando at the atomic scale which may revolutionize battery and catalysis technologies. Current algorithms used for phase retrieval in coherent x-ray imaging are based on the projection onto sets method. These traditional iterative phase retrieval methods will become more computationally expensive as they push towards atomic resolution and may struggle to converge. Additionally, these methods do not incorporate physical information that may additionally constrain the solution. In this work, we present an algorithm which incorporates molecular dynamics into Bragg coherent diffraction imaging (BCDI). This algorithm, which we call PRAMMol (Phase Retrieval with Atomic Modeling and Molecular Dynamics) combines statistical techniques with molecular dynamics to solve the phase retrieval problem. We present several examples where our algorithm is applied to simulated coherent diffraction from 3D crystals and show convergence to the correct solution at the atomic scale.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

A renewable double plasma mirror for Petawatt-class lasers

Exceptional pulse contrast can be critical for ultraintense laser experiments, particularly when using solid density targets, and their use is becoming widespread. However, current plasma mirror technology is becoming inadequate for the new generation of high repetition rate, high power lasers now available. We describe a novel double plasma mirror configuration based on renewable, free standing, ultrathin liquid crystal films tested at the BELLA Petawatt Laser Center. Although operating at a repetition rate of several shots per minute, this system can be scaled to a high repetition rate exceeding 1 Hz and represents an important step towards enabling sustained, continuous operation of plasma mirrors. We demonstrate an improvement of two to three orders of magnitude in contrast and a total throughput of 80%. We present the first measurements of a beam reflected from a single or double plasma mirror system using a wavefront sensor, showing a well preserved wavefront and spatial mode. Finally, we introduce a model that predicts the total throughput through this double plasma mirror. This is the first model that accurately predicts the peak reflectivity of a plasma mirror when given the laser temporal profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Charge state transition levels of Ni in $β$-Ga 2 O 3 crystals from experiment and theory: An attractive candidate for compensation doping

Nickel-doped β-Ga 2 O 3 crystals were investigated by optical absorption and photoconductivity, revealing Ni-related deep levels. Here, the photoconductivity spectra were fitted using the phenomenological Kopylov and Pikhtin model to identify the energy of the zero-phonon transition (thermal ionization), Franck–Condon shift, and effective phonon energy. The resulting values are compared with the predicted ones by first-principle calculations based on the density functional theory (DFT). An acceptor level (0/-) of 1.9 eV and a donor level (+/0) of 1.1 eV above the valence band minimum are consistently determined for Ni Ga , which preferentially incorporates on the octahedrally coordinated Ga site. Temperature-dependent resistivity measurements yield a thermal activation energy of ~2.0 eV that agrees well with the determined Ni acceptor level. Conclusively, Ni is an eminently suitable candidate for compensation doping for producing semi-insulating β-Ga 2 O 3 substrates due to the position of the acceptor level (below and close to the mid-bandgap).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Vibrational modes and crystallographic structure of Cd 3 As 2 and (Cd 1-x Zn x ) 3 As 2 epilayers

Low-temperature Raman scattering is used to study the crystal structure of molecular-beam epitaxially grown layers of the Dirac semimetal Cd 3 As 2 and its related alloy (Cd 1-x Zn x ) 3 As 2 . The combination of narrow-linewidth spectra, multiple growth directions and full polarization analysis allows improved accuracy in identifying the irreducible representation of over 57 Raman-active vibrations. Several disagreements with previous identifications are found. Structurally, the results agree with the centrosymmetric I41/acd space group of bulk-grown Cd 3 As 2 and are clearly distinct from the Raman spectra of nanoscale platelets and wires. Three-fold twinning is seen in (112) Cd 3 As 2 grown on (111) zincblende substrates corresponding to the three possible tetragonal orientations. In dilute (Cd 1-x Zn x ) 3 As 2 , phonons have a frequency and scattering amplitude dependence on Zn concentration that is continuous with Cd 3 As 2 but at least one frequency is absent at the alloy endpoint, preventing a simple one-mode description of the alloy phonon.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A ray-tracing algorithm for ab-initio calculation of thermal load in undulator-based synchrotron beamlines

The OASYS suite and its powerful integration features are used to implement a ray-tracing algorithm to accurately calculate the thermal load in any component of an undulator-based synchrotron beamline. This is achieved by sampling and converting the SRW source of a given energy into a Shadow source and using the latter code to ray trace the full beamline. The accuracy of the algorithm is proved by reconstructing the full undulator radiation distribution through an aperture and comparing the result with direct calculaton of the total power using SRW. The algorithm is particularly suited to analyze cases with complex beamline layouts and optical elements, such as crystals, multilayers, and compound refractive lenses. Examples of its use to calculate the power load on elements of two of the feature beamlines at the Advanced Photon Source Upgrade Project and a comparison of the results with analytical calculations are presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

(NH 4 ) 2 [UO 2 Cl 4 ]·2H 2 O, a new uranyl tetrachloride with ammonium charge-balancing cations

A new uranyl tetrachloride salt with chemical formula, (NH 4 ) 2 [UO 2 Cl 4 ]·2H 2 O, namely, diammonium uranyl tetrachloride dihydrate, 1 , was prepared and crystallized via slow evaporation from a solution of 2 M hydrochloric acid. As confirmed by powder X-ray diffraction, the title compound crystallizes with an ammonium chloride impurity that formed as a result of the breakdown of a triazine precursor. The (UO 2 Cl 4 ) 2− dianion is charge balanced by ammonium cations, while an extensive hydrogen-bond network donated from structural water molecules stabilize the overall assembly. Compound 1 adds to the extensive collection of actinyl tetrachloride salts, but it represents the first without an alkali cation for purely inorganic compounds. Diffuse reflectance and luminescence spectra show typical absorption and emission behavior, respectively, of uranyl materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Efficient Optical Control of Magnon Dynamics in van der Waals Ferromagnets

Optical control of magnons in two-dimensional (2D) materials promises new functionalities for spintronics and magnonics in atomically thin devices. Here, we report control of magnon dynamics, using laser polarization, in a ferromagnetic van der Waals (vdW) material, Fe 3.6 Co 1.4 GeTe 2 . The magnon amplitude, frequency, and lifetime are controlled and monitored by time-resolved pump-probe spectroscopy. We show substantial (over 25%) and continuous modulation of magnon dynamics as a function of incident laser polarization. Our results suggest that the modification of the effective demagnetization field and magnetic anisotropy by the pump laser pulses with different polarizations is due to anisotropic optical absorption. This implies that pump laser pulses modify the local spin environment, which enables the launch of magnons with tunable dynamics. Our first-principles calculations confirm the anisotropic optical absorption of different crystal orientations. Our findings suggest a new route for the development of opto-spintronic or opto-magnonic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Summary of Summer Project: Evaluating New Double Perovskite Halide Scintillators for Radiation Detection Applications

Project Outline: • Experimental validation of machine learning based prediction models; • Evaluating double perovskite halides (chlorides, some bromides) – A 2 bb'X 6 :Ce; A = Br + , Cs + ; B = Na + , K + ; B' = RE 3+ ; X = Cl - , Br - ; • Performing single crystal growth and characterization (physical, optical, scintillation properties).

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Electronic and optical properties of Zn-doped β-Ga 2 O 3 Czochralski single crystals

β-Ga 2 O 3 has several soluble deep acceptors that impart insulating behavior. In this study, we investigate Zn doping (0.25at.%) in bulk Czochralski and vertical gradient freeze β-Ga 2 O 3 . Representative crystals were assessed for orientation (electron backscatter diffraction and Raman spectroscopy), purity (glow discharge mass spectrometry and secondary ion mass spectrometry), optical properties (ultraviolet to near infrared absorption), and electrical properties (resistivity and current–voltage). Purity measurements indicate that Zn evaporation is insufficient to inhibit doping of Zn into β-Ga 2 O 3 . Hybrid functional calculations show Zn substitutes nearly equally on tetrahedral and octahedral sites, with less than ~0.1eV preference for the octahedral (Ga II ) site. Furthermore, calculations show that Zn Ga acts as a deep acceptor with trapping levels ~1.3 and ~0.9eV above the valence band for one and two holes, respectively. The solubility and electronic behavior of Zn dopants are consistent with measured concentrations >1×10 18 atoms/cm 3 and electrical measurements that show resistivity 10 11 –10 13 Ωcm, with no p-type conduction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multimodal Characterization of Crystal Structure and Formation in Rubrene Thin Films Reveals Erasure of Orientational Discontinuities

Abstract Multimodal multiscale characterization provide opportunities to study organic semiconducting thin films with multiple length scales, across multiple platforms, to elucidate crystallization mechanisms of the various microstructures that impact functionality. With polarized scanning transmission X‐ray and 4D‐scanning transmission electron microscopy, hybrid crystalline structures in rubrene thin films in which large crystalline domains surround a common nucleus and transition to a spherulite morphology at larger radii is observed. These high‐resolution techniques reveal how azimuthal orientational discontinuities at smaller radii are erased as spherulite morphology takes hold. In situ crystallization in the films with optical microscopy is also captured, discovering the importance of considering the initial temperature increase of a film during thermal annealing over the crystallization timescale. This kinetic information of the radial crystallization rate and of corresponding film heating kinetics is used to estimate the temperature at which the larger crystalline regions transition into a spherulite. By combining the results obtained from the different characterization modes, it is learned that thermal conditions can sensitively affect the crystallization of rubrene and other organic thin films. The observations suggest opportunities for more complex temperature‐dependent processing to maximize hybrid structures’ functionality in organic thin films and demonstrate that multimodal studies deepen the understanding of structure‐function dynamics.

Tan, Jenna A.↗
DOE OSTI2022

Electron beam heating as a tool for fabricating lattice engineered crystals in glass [Invited]

Laser heating is well-established to impart optical functionality into glass by local modification and crystallization. In this paper, we demonstrate electron beam heating in scanning and transmission microscopes as an alternative for the local crystallization of Sb 2 S 3 in Sb-S-I glasses as a model system. Governed by different absorption physics, the electron beam expands morphological control of crystal cross section relative to laser, producing nanoscale (∼50 nm) single crystal architectures. We also report the effects of accelerating voltage and probe current and characterize the curved lattice of crystals formed in glass with electron diffraction techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Charge ordering and structural transition in the new organic conductor {delta}'-(BEDT-TTF){sub 2}CF{sub 3}CF{sub 2}SO{sub 3}.

We report structural, transport, and optical properties and electronic structure calculations of the delta'-(BEDT-TTF) 2CF3CF2SO3 (BEDT-TTF = bis(ethylenedithio)-tetrathiafulvalene) organic conductor that has been synthesized by electrocrystallization. Electronic structure calculations demonstrate the quasi-one-dimensional Fermi surfaces of the compound, while the optical spectra are characteristic for a dimer-Mott insulator. The single-crystal X-ray diffraction measurements reveal the structural phase transition at 200 K from the ambient-temperature monoclinic P2(1)/m phase to the low-temperature orthorhombic Pca2(1) phase, while the resistivity measurements clearly show the first order semiconductor-semiconductor transition at the same temperature. This transition is accompanied by charge-ordering as it is confirmed by splitting of charge-sensitive vibrational modes observed in the Raman and infrared spectra. The horizontal stripe charge-order pattern is suggested based on the crystal structure, band structure calculations, and optical spectra.

Olejniczak, Iwona↗
DOE OSTI2020

Preface

Crystallization via nonclassical pathways is important during the formation of minerals in nature and has become a popular method to synthesize advanced materials on both laboratory and industrial scales. Unlike classical crystal growth pathways via monomer-by-monomer addition, crystallization via nonclassical pathways such as particle-by-particle attachment can form bigger crystals more quickly. Many materials prepared via non-classical crystallization have been applied in various fields such as energy, catalysis, environment, biomedicine, optics, electrics, and magnetics. Understanding nonclassical crystallization pathways could provide new insights on design and synthesize novel materials. This ACS Book series aims to provide updated information on fundamental nonclassical crystallization research, including theory and experiments. It’s also designed for experienced researchers to reinforce their knowledge on the scopes of development of new techniques, especially state-of-the-art in situ characterization tools, to understand mechanisms of crystallization via nonclassical pathways. Topics that would be covered in this book series include: (1) nonclassical nucleation; (2) cluster assembly; (3) particlebased crystallization; (4) crystal formation from amorphous intermedium phases; (5) biomineralization via nonclassical pathways; (6) theoretical developments to simulate nonclassical crystallization; (7) observation of the nonclassical crystallization pathways via various characterization techniques; and (8) the application of nonclassical crystallization. Volume I of the Nonclassical Crystallization Book Series will cover a broad range of topics about nucleation, assembly, observation, and applications of nonclassical crystallization.

Zhang, Xin↗
DOE OSTI2021

Preface

Crystallization via nonclassical pathways is important during the formation of minerals in nature and has become a popular method to synthesize advanced materials on both laboratory and industrial scales. Unlike classical crystal growth pathways via monomer-by-monomer addition, crystallization via nonclassical pathways, such as particle-by-particle attachment, can form larger crystals more quickly. Materials prepared via nonclassical crystallization have been applied in various fields such as energy, catalysis, environment, biomedicine, optics, electrics, and magnetics. Understanding nonclassical crystallization pathways could provide new insights into synthesizing novel materials. This ACS Book series aims to provide updated information on fundamental nonclassical crystallization research, including theory and experiments. It is also intended for experienced researchers, to reinforce their knowledge of the developmental scope of new techniques–especially state-of-the-art in situ characterization tools–to understand mechanisms of crystallization via nonclassical pathways. Topics covered in this book series include: (1) nonclassical nucleation; (2) cluster assembly; (3) particle-based crystallization; (4) crystal formation from amorphous intermedium phases; (5) biomineralization via nonclassical pathways; (6) theoretical developments to simulate nonclassical crystallization; (7) observation of the nonclassical crystallization pathways via various characterization techniques; and (8) the application of nonclassical crystallization. Volume II of the Nonclassical Crystallization Book Series will cover a broad range of topics including particle-based crystallization, biomolecular self-assembly, biomineralization, nanoscale imaging, and applications of nonclassical crystallization.

Zhang, Xin↗
DOE OSTI2024

In situ tuning of optomechanical crystals with nano-oxidation

Optomechanical crystals are a promising device platform for quantum transduction and sensing. Precise targeting of the optical and acoustic resonance frequencies of these devices is crucial for future advances on these fronts. However, fabrication disorder in these wavelength-scale nanoscale devices typically leads to inhomogeneous resonance frequencies. Here we achieve in situ , selective frequency tuning of optical and acoustic resonances in silicon optomechanical crystals via electric field-induced nano-oxidation using an atomic-force microscope. Our method can achieve a tuning range >2nm (0.13%) for the optical resonance wavelength in the telecom C-band, and >60MHz (1.2%) for the acoustic resonance frequency at 5 GHz. The tuning resolution of 1.1 pm for the optical wavelength and 150 kHz for the acoustic frequency allows us to spectrally align multiple optomechanical crystal resonators using a pattern generation algorithm. Our results establish a method for precise post-fabrication tuning of optomechanical crystals. This technique can enable coupled optomechanical resonator arrays, scalable resonant optomechanical circuits, and frequency matching of microwave-optical quantum transducers.

Hatipoglu, Utku (ORCID:0000000205119196)↗
DOE OSTI2026

Wigner polarons probe the dynamics of a Wigner crystal in a monolayer semiconductor

Wigner crystals—lattices made purely of electrons—provide a platform for studying correlation-driven quantum phase transitions. Despite extensive research, accessing the internal dynamics of Wigner crystals has remained challenging, with most experiments probing only static order or collective motion. Here we demonstrate optical probing and the manipulation of zero-field Wigner crystals and elucidate their static and dynamic properties in the frequency domain. We observe optical resonances that we identify as Wigner polarons—quasiparticles formed when the electron lattice is locally distorted by exciton–Wigner crystal coupling. We further achieve all-optical control of spins in the Wigner crystal, thereby directly probing valley-dependent Wigner polaron scattering well above the magnetic ordering temperature and in the absence of any external magnetic field. Lastly, we show optical melting of the Wigner crystal and observe different responses of the umklapp (static) and Wigner polaron (dynamic) resonances to optical excitation. Our results provide an avenue for understanding electron dynamics and achieving ultrafast optical control of interaction-driven quantum phase transitions in strongly correlated electron systems.

2D materials↗