Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Microstructure and mechanical properties of a single crystal NiAl alloy with Zr or Hf rich G-phase precipitates

The possibility of producing NiAl reinforced with the G-phase (Ni16X6Si7), where X is Zr or Hf, has been investigated. The microstructure of these NiAl alloys have been characterized in the as-cast and annealed conditions. The G-phases are present as fine cuboidal precipitates (10 to 40 nm) and have lattice parameters almost four times that of NiAl. They are coherent with the matrix and fairly resistant to coarsening during annealing heat treatments. Segregation and nonuniform precipitate distribution observed in as-cast materials were eliminated by homogenization at temperatures near 1600 K. Slow cooling from these temperatures resulted in large plate shaped precipitates, denuded zones, and a loss of coherency in some of the large particles. Faster cooling produced a homogeneous fine distribution of cuboidal G-phase particles in the matrix. Preliminary mechanical properties for the Zr-doped alloy are presented and compared to binary single crystal NiAl. The presence of these precipitates appears to have an important strengthening effect at temperatures not less than 1000 K compared to binary NiAl single crystals.

Locci, I. E.↗
NASA NTRS1999

Numerical Modeling and In-Situ Observations of the Dynamics of the Solid/Liquid Interface Morphology During Directional Solidification of Alloys

The departure from interface planarity and the subsequent evolution to a periodic array of cells or dendrites is a fundamental process that characterizes most microstructures in solidified alloys. The growing demand for high quality alloys and semiconductor crystals requires a precise methodology to predict and subsequently control both the interface morphology and the distribution of impurities, additives, and phases in the grown crystal. Apart from its practical significance, the study of morphological evolution has also been viewed as a means to unearth a general paradigm for pattern formation in nature. A previously developed 2D numerical model for the solid/liquid interface tracking has been further refined and used to simulate the time-evolution of the perturbations on the interface. The dynamics of the local growth velocity, interface undercooling and solute concentration at the interface has been theoretically predicted by means of the numerical model for Al-Cu and Pb-Sn alloys. The model shows that perturbations with a wavelengths, lambda greater than a critical wavelength lambda(sub c) continue to grow in time whereas perturbations with lambda < lambda(sub c) cease to propagate. The model further predicts that under certain conditions perturbation can also propagate along the interface. Comparison of these predictions with existing theories of pattern formation and experimental results will be discussed.

Catalina, Adrian V.↗
NASA NTRS2002

The Design of a Remotely Operated Shutter (ROS) for Thermal Vacuum Testing

Space-flight hardware is required to meet specific outgassing criteria under vacuum conditions in order to reduce the risk of contaminating sensitive optics and spacecraft components. Under certain circumstances, it is desirable to measure the contamination levels that are being released from all surfaces of the test payload. This certification is often accomplished with a Total Outgassing Measurement (TOM) box. The TOM box has one 103.2 square centimeter (16 square inch) opening and one 4.84 square centimeter (0.75 square inches) opening. The larger opening allows contaminants to easily escape the box during the hardware bakeout phase. The smaller opening provides a limited conductance path for outgassed contaminants during the certification phase. A Thermoelectric Quartz Crystal Microbalance (TQCM) monitors the contamination levels inside the box to provide the total outgassing measurement. During transition from the bakeout phase to the certification phase, the TOM box is reconfigured to close the larger opening. For previous certifications, the vacuum chamber was returned to ambient conditions and the larger conductance port was closed manually. The ROS system eliminates the need to enter the chamber by remotely closing the large TOM box opening. Substantial schedule and cost savings are achieved through the use of this system. The ROS system consists of three main components; a shutter, a motion actuator, and an actuator controller. Each of these components was selected or designed to operate in an extreme-temperature and vacuum environment while providing a high level of reliability. Different types of motion actuators were considered for driving the shutter. Design parameters for the actuator included material properties, force capability, reliability, and cost.

Hale, Kathleen L.↗
NASA NTRS2003

Nanolayered Features of Collagen-like Peptides

We have been investigating collagen-like model oligopeptides as molecular bases for complex ordered biomimetic materials. The collagen-like molecules incorporate aspects of native collagen sequence and secondary structure. Designed modifications to native primary and secondary structure have been incorporated to control the nanostructure and microstructure of the collagen-like materials produced. We find that the collagen-like molecules form a number of lyotropic rod liquid crystalline phases, which because of their strong temperature dependence in the liquid state can also be viewed as solvent intercalated thermotropic liquid crystals. The liquid crystalline phases formed by the molecules can be captured in the solid state by drying off solvent, resulting in solid nanopatterned (chemically and physically) thermally stable (to greater than 100 C) materials. Designed sequences which stabilize smectic phases have allowed a variety of nanoscale multilayered biopolymeric materials to be developed. Preliminary investigations suggest that chemical patterns running perpendicular to the smectic layer plane can be functionalized and used to localize a variety of organic, inorganic, and organometallic moieties in very simple multilayered nanocomposites. The phase behavior of collagen-like oligopeptide materials is described, emphasizing the correlation between mesophase, molecular orientation, and chemical patterning at the microscale and nanoscale. In many cases, the textures observed for smectic and hexatic phase collagens are remarkably similar to the complex (and not fully understood) helicoids observed in biological collagen-based tissues. Comparisons between biological morphologies and collagen model liquid crystalline (and solidified materials) textures may help us understand the molecular features which impart order and function to the extracellular matrix and to collagen-based mineralized tissues. Initial studies have utilized synthetic collagen-like peptides while future work will also focus on similar sequences generated via genetic engineering methods.

Valluzzi, Regina↗
NASA NTRS1990

Ground-based experiments on thermal and thermosolutal convection in inclined low-aspect-ratio enclosures

Thermal and thermosolutal convection driven by buoyancy forces are investigated experimentally in inclined low-aspect-ratio enclosures. Thermal and thermosolutal convection are important in crystal growth processes. The transport process in the fluid phase during the growth of a crystal has a profound influence on the structure and quality of the solid phase. The present work is concerned with natural convection in a shallow rectangular enclosure with imposed inclined temperature and/or concentration gradients. Various complex flow patterns are observed with different experimental conditions. A flow instability under certain conditions is reported. The flow instability is found to depend not only on the thermal and solutal Grashof numbers, the aspect ratios, but also the inclined angles.

Wang, L. W.↗
NASA NTRS1989

An alternate hypothesis for the origin of Angra dos Reis - Porphyry, not cumulate

The Angra dos Reis achondrite is a unique meteorite of potentially great importance for understanding the origins of the solar system and of the terrestrial planets. It is proposed that the meteorite, which consists of megacrysts of Al-Ti augite (fassaite) in skeletal or cellular shapes, olivine, and possibly whitlockite in a fine-grained groundmass of the same materials plus spinel, is a porphyritic igneous rock modified by metamorphism. In this interpretation, the megacrysts represent cellular-textured phenocrysts, and the fine-grain groundmass represents crystallized or devitrified magma. Phase equilibria suggest that Angra dos Reis-like compositions could grow phenocrysts of fassaite pyroxene, olivine, and whitlockite. These same compositions could crystallize, without crystal sorting or accumulation, to an almost monomineralic fassaite pyroxenite.

Treiman, A. H.↗
NASA NTRS1990

A highly stable crystal oscillator applied to geodetic VLBI experiment

Instead of a hydrogen maser, a carefully selected Crystal oscillator which is phase locked to a Cesium (Cs) frequency standard of a geodetic VLBI experiment. The domestic VLBI experiment with 55 km baseline using the Crystal oscillator at one end was made in Japan and the obtained error of the baseline vector components were 4 cm, and that of the baseline length was 3 cm. This system may be operated after only 2 hours warm up. These results coincides with those of conventional geodetic Laser ranging and VLBI using a hydrogen maser within the formal error. A VLBI experiment with over 1000 km baselines were carried out successfully from October 1988, and over 11000 km baseline between Japan and Antarctica was carried out successfully in January 1990.

Kiuchi, Hitoshi↗
NASA NTRS1988

Crystallization kinetics of BaO-Al2O3-SiO2 glasses

Barium aluminosilicate glasses are being investigated as matrix materials in high-temperature ceramic composites for structural applications. Kinetics of crystallization of two refractory glass compositions in the barium aluminosilicate system were studied by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). From variable heating rate DTA, the crystallization activation energies for glass compositions (wt percent) 10BaO-38Al2O3-51SiO2-1MoO3 (glass A) and 39BaO-25Al2O3-35SiO2-1MoO3 (glass B) were determined to be 553 and 558 kJ/mol, respectively. On thermal treatment, the crystalline phases in glasses A and B were identified as mullite (3Al2O3-2SiO2) and hexacelsian (BaO-Al2O3-2SiO2), respectively. Hexacelsian is a high-temperature polymorph which is metastable below 1590 C. It undergoes structural transformation into the orthorhombic form at approximately 300 C accompanied by a large volume change which is undesirable for structural applications. A process needs to be developed where stable monoclinic celsian, rather than hexacelsian, precipitates out as the crystal phase in glass B.

Bansal, Narottam P.↗
NASA NTRS1989

Crystallization kinetics of BaO-Al2O3-SiO2 glasses

Barium aluminosilicate glasses are being investigated as matrix materials in high-temperature ceramic composites for structural applications. Kinetics of crystallization of two refractory glass compositions in the barium aluminosilicate system were studied by differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). From variable heating rate DTA, the crystallization activation energies for glass compositions (wt percent) 10BaO-38Al2O3-51SiO2-1MoO3 (glass A) and 39BaO-25Al2O3-35SiO2-1MoO3 (glass B) were determined to be 553 and 558 kJ/mol, respectively. On thermal treatment, the crystalline phases in glasses A and B were identified as mullite (3Al2O3-2SiO2) and hexacelsian (BaO-Al2O3-2SiO2), respectively. Hexacelsian is a high-temperature polymorph which is metastable below 1590 C. It undergoes structural transformation into the orthorhombic form at approximately 300 C accompanied by a large volume change which is undesirable for structural applications. A process needs to be developed where stable monoclinic celsian, rather than hexacelsian, precipitates out as the crystal phase in glass B.

Bansal, Narottam P.↗
NASA NTRS2004

The Crystallization of Canavalin as a Function of pH and NaCl Concentration

We posed the question of what happens to a protein that is known to grow as an n-mer when it is placed in solution conditions where it is monomeric. The trypsin-treated, or cut, form of the protein canavalin (CCAN) has been shown to nucleate and grow crystals as a trimer from neutral to slightly acidic solutions. Under these conditions the solution is composed almost wholly of trimers. The crystalline protein can be readily dissolved by weakly basic solution, which has been proposed to result in a solution that is monomeric. There are three possible outcomes to an attempt at crystallization of the protein under monomeric (high pH) conditions: 1) we will obtain the same crystals as under trimer conditions, but at different protein concentrations governed by the self association equilibria; 2) we will obtain crystals having a different symmetry, based upon a monomeric growth unit; 3) we will not obtain crystals. Obtaining the first result would be indicative that the solution-phase self-association process is critical to the crystal nucleation and growth process. The second result would be less clear, as it may also reflect a pH-dependent shift in the trimer-trimer molecular interactions. The third result, particularly for experiments in the transition pH's between trimeric and monomeric CCAN, would indicate that the monomer does not crystallize, and that solution phase self association is not part of the crystal nucleation and growth path. Results are presented for crystallization experiments of CCAN over the pH 6.4 to 9.6 range. Fluorescence anisotropy, light scattering, and gel filtration experiments show that the solutions are primarily trimers, with association to form larger species occurring as a function of protein concentration.

Forsythe, Elizabeth L.↗
NASA NTRS2001

Phase sensitive x-ray diffraction imaging of defects in biological macromolecular crystals

Conventional x-ray diffraction topography is currently used to map defects in the bulk of protein crystals, but the lack of sufficient contrast is frequently a limiting factor. We experimentally demonstrate that this barrier can be circumvented using a method that combines phase sensitive and diffraction imaging principles. Details of defects revealed in tetragonal lysozyme and cubic ferritin crystals are presented and discussed. The approach enabling the detection of the phase changes of diffracted x rays should prove to be useful in the study of defect structures in a broad range of biological macromolecular crystals.

Muramidase/chemistry↗
NASA NTRS2015

Wideband Single Crystal Transducer for Bone Characterization

Phase II objectives: Optimize the Phase I transducer for sensitivity; Test different transmit signals for optimum performance; Demonstrate compatibility with electronics; Confirm additional transducer capabilities over conventional systems by calibrating with other methods.

Sahul, Raffi↗
NASA NTRS1980

An experimental study of the thermal history of fragment-laden 'basalt' 77115

Phase equilibrium and dynamic crystallization experiments using a synthetic analog of the 77115 matrix composition restrict interpretations of the thermal history of the lunar sample. Rapid early cooling (10-25 G/hr) of melt containing a large number of a nuclei and slow late stage cooling (less than 7 C/hr) are required to crystallize the textures and mineralogy of the 77115 matrix. This result is in agreement with that predicated by the nature and extent of diffusive cation exchange between various xenocrysts phases and the 77115 matrix.

Thornber, C. R.↗
NASA NTRS1993

Numerical Model for Isothermal and Non-Isothermal Crystallization of Liquids and Glasses

A new numerical model of isothermal and non-isothermal first order phase transformations, such as the crystallization of liquids and glasses, is presented. This model computes directly the volume fraction transformed, taking into account time-dependent nucleation rates and cluster-size-dependent growth velocities. The model is applied to the crystallization of lithium disilicate glass, using the appropriate kinetic and thermodynamic parameters. The model is used (1) to determine the validity of common methods for computing the volume fraction transformed as a function of time in isothermal experiments when a time-dependent nucleation rate is expected, (2) to simulate non-isothermal differential scanning calorimetry (DSC) studies of glass devitrification as a function of scan rate, and (3) to compute the effect of preannealing on the DSC peak parameters. A novel behavior of the nucleation rate with scan rate is predicted, arising because the relaxation of the cluster distribution cannot be described by a single relaxation time. Comparisons of the calculations with experimental data on this glass demonstrate the validity of the model.

Kelton, K. F.↗
NASA NTRS1975

The study of single crystals for space processing and the effect of zero gravity

A study was undertaken to analyze different growth techniques affected by a space environment. Literature on crystal growth from melt, vapor phase and float zone was reviewed and the physical phenomena important for crystal growth in zero-gravity environment was analyzed. Recommendations for potential areas of crystal growth feasible for space missions are presented and a bibliography of articles in the area of crystal growth in general is listed.

Lal, R. B.↗