Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal phenomena”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Microscopic Mechanisms of Glasslike Lattice Thermal Transport in Cubic Cu 12 Sb 4 S 13 Tetrahedrites

Materials based on cubic tetrahedrites (Cu 12 Sb 4 S 13 ) are useful thermoelectrics with unusual thermal and electrical transport properties, such as very low and nearly temperature-independent lattice thermal conductivity (κ L ). We explain the microscopic origin of the glasslike κ L in Cu 12 Sb 4 S 13 by explicitly treating anharmonicity up to quartic terms for both phonon energies and phonon scattering rates. We show that the strongly unstable phonon modes associated with trigonally coordinated Cu atoms are anharmonically stabilized above approximately 100 K and continue hardening with increasing temperature in accord with experimental data. This temperature-induced hardening effect reduces scattering of heat carrying acoustic modes by reducing the available phase space for three-phonon processes, thereby balancing the conventional ∝ T increase in scattering due to phonon population and yielding nearly temperature independent κ L . Furthermore, we find that very strong phonon broadening leads to a qualitative breakdown of the conventional phonon-gas model and modify the dominant heat transport mechanism from the particlelike phonon wave packet propagation to incoherent contributions described by the off-diagonal terms in the heat-flux operator, which are typically prevailing in glasses and disordered crystals. Furthermore, our work paves the way to a deeper understanding of glasslike thermal conductivity in complex crystals with strong anharmonicity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Asymmetry of the Ferroelectric Phase Transition in BaTiO 3

Symmetry changes during phase transformations fundamentally determine the behavior of thermodynamic systems, governing phenomena as diverse as water evaporation, fermion condensation, and epidemic spreading. Phase transitions are conventionally divided into two classes, and this classification is typically assumed to remain invariant upon reversing the transition. Here, an asymmetric phase transformation is uncovered in the ferroelectric–paraelectric transition of single-crystal BaTiO 3 , a model system for first-order transitions. Under slow temperature variation (≤0.1 °C min −1 ), thermodynamic, dielectric, and domain-structure measurements reveal that the ferroelectric-to-paraelectric transition exhibits latent heat, phase coexistence, and a discontinuous order parameter, while these signatures are absent upon cooling. Complementary phase-field simulations demonstrate similar behavior, attributing it to distinct elastic strain energy accumulation and release during heating and cooling. These findings reveal a first-order character upon heating but a second-order-like behavior upon cooling, challenging the conventional paradigm of symmetric phase-transition classification and suggesting new possibilities for ferroelectric-based energy storage.

Hershkovitz, Asaf [Technion-Israel Institute of Te↗

Exciton-driven antiferromagnetic metal in a correlated van der Waals insulator

Abstract Collective excitations of bound electron-hole pairs—known as excitons—are ubiquitous in condensed matter, emerging in systems as diverse as band semiconductors, molecular crystals, and proteins. Recently, their existence in strongly correlated electron materials has attracted increasing interest due to the excitons’ unique coupling to spin and orbital degrees of freedom. The non-equilibrium driving of such dressed quasiparticles offers a promising platform for realizing unconventional many-body phenomena and phases beyond thermodynamic equilibrium. Here, we achieve this in the van der Waals correlated insulator NiPS 3 by photoexciting its newly discovered spin–orbit-entangled excitons that arise from Zhang-Rice states. By monitoring the time evolution of the terahertz conductivity, we observe the coexistence of itinerant carriers produced by exciton dissociation and a long-wavelength antiferromagnetic magnon that coherently precesses in time. These results demonstrate the emergence of a transient metallic state that preserves long-range antiferromagnetism, a phase that cannot be reached by simply tuning the temperature. More broadly, our findings open an avenue toward the exciton-mediated optical manipulation of magnetism.

36 MATERIALS SCIENCE↗

Zero-field Hall effect emerging from a non-Fermi liquid in a collinear antiferromagnet V 1/3 NbS 2

Magnetically intercalated transition metal dichalcogenides (TMDs) provide a versatile three-dimensional (3D) material platform to explore quantum phenomena and functionalities that emerge from an intricate interplay among magnetism, band structure, and electronic correlations. Here, we report the observation of a nearly magnetization-free anomalous Hall effect (AHE) accompanied by non-Fermi liquid (NFL) behavior and collinear antiferromagnetism (AFM) in V 1/3 NbS 2 . Our single-crystal neutron diffraction measurements identify a commensurate, collinear AFM order formed by intercalated V moments. In the magnetically ordered state, the spontaneous AHE is tenfold greater than expected from empirical scaling with magnetization, and this strongly enhanced AHE arises in the NFL regime that violates the quasiparticle picture. V 1/3 NbS 2 challenges the existing single-particle framework for understanding AHEs based on one-body Berry curvature and highlights the potential of magnetically intercalated TMDs to unveil new electronic functionalities where many-body correlations play a critical role.

36 MATERIALS SCIENCE↗

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

30 DIRECT ENERGY CONVERSION↗

Non-classical crystallization in soft and organic materials

Classical nucleation and crystal growth theories describe how nuclei form, become stable after reaching a critical size and then enlarge through monomer attachment. More than two decades ago, non-classical pathways have been proposed for various types of (bio)molecules and materials, which can substantially alter the crystallization kinetics and outcomes. Direct observation of non-classical crystallization of inorganic nanomaterials, including metastable structure-mediated and particle attachment-based pathways that usually occur on the nanoscale, was enabled by in situ liquid-phase electron microscopy. However, it was not until recently that the crystallization dynamics of beam-sensitive soft materials were directly imaged with sufficient spatial resolution, and a level of microstructural understanding of defects and interfaces emerged. This article provides a high-level review of the non-classical crystallization pathways discovered in soft and organic materials and a forward-looking guide for future research. We first analyse how the characteristics of soft materials affect their crystallization pathways and kinetics. We then identify technical approaches to studying the crystallization trajectories of soft materials and discuss strategies to properly select and apply them to different systems. Breakthroughs made in understanding the crystallization of small organic molecules, (bio)macromolecules, colloids and reticular framework materials are examined. Lastly, we provide an outlook on the challenges in elucidating soft material crystallization pathways and the opportunities for assisting the design and synthesis of new materials and structures.

36 MATERIALS SCIENCE↗

Anisotropy, frustration, and saddle point in the twisted kagome compound ErPdPb

The kagome lattice, with its inherent geometric frustration, provides a rich platform for exploring intriguing magnetic phenomena and topological electronic structures. In reduced-symmetry structures, such as twisted kagome systems involving rare earth elements, additional anisotropy can arise, enabling intriguing properties including spin-ice states, magnetocaloric effects, noncollinear magnetic ordering, and the anomalous Hall effect. Here, we report the synthesis of single crystals of ErPdPb, which features a twisted kagome lattice net of Er atoms within the hexagonal ZrNiAl-type structure, and we investigate its magnetic, electronic, and thermal properties. The material exhibits a highly anisotropic, correlated magnetic state below 2.7 K, as evidenced by magnetic, transport, and heat capacity measurements. Density functional theory (DFT) calculations indicate strong easy-axis anisotropy, consistent with experiment and crystal-field expectations, as well as quasi-one-dimensional bands and a spin-split saddle point at the zone center. Here, the coexistence of competing magnetic interactions along different crystallographic directions suggests an inherent degree of frustration. ErPdPb thus provides a promising platform for exploring the interplay of frustration, anisotropy, and electronic structure in a twisted kagome lattice.

Antiferromagnets↗

Comparison of three state-of-the-art crystal plasticity based deformation twinning models for magnesium alloys

In magnesium alloys, deformation twinning and its interactions with dislocation slip are responsible for a sigmoidal shape stress–strain behavior and an asymmetrical tension–compression yield strength in magnesium alloys. The sensitivity of twinning to the underlying microstructure renders the crystal plasticity method the most commonly adopted modeling approach for magnesium-twinning. This paper compares three state-of-the-art crystal plasticity-based twinning models from the literature, namely the elastic-viscoplastic self-consistent twinning-detwinning (EVPSC-TDT) model, crystal plasticity finite element model based on enhanced predominate twin reorientation approach (CPFE-ePTR), and the crystal plasticity finite element model based on “discrete twinning” approach (CPFE-DT). A polycrystalline microstructure is simulated with all three methods to compare the resulting stress–strain curves and lattice strains to those from the experimentally measured data. All three methods showed the capability of capturing the experimental results with different levels of accuracy. Additionally, the EVPSC-TDT method avoids solving the finite element matrices and showed the highest computational efficiency. The CPFE-ePTR model shows a higher accuracy in capturing the lattice strain. The CPFE-DT relies on high-resolution finite element mesh and is much slower than the other two methods, but it captured the local deformation concentration and stress reversal phenomena near the twin band, which was not possible with the other two methods. Based on the comparison, guidance for the selection of the appropriate model based on the specific modeling target is provided in this paper.

36 MATERIALS SCIENCE↗

Moiré-driven topological electronic crystals in twisted graphene

In a dilute two-dimensional electron gas, Coulomb interactions can stabilize the formation of a Wigner crystal. Although Wigner crystals are topologically trivial, it has been predicted that electrons in a partially filled band can break continuous translational symmetry and time-reversal symmetry spontaneously, resulting in a type of topological electron crystal known as an anomalous Hall crystal. Here we report signatures of a generalized version of the anomalous Hall crystal in twisted bilayer–trilayer graphene, whose formation is driven by the moiré potential. The crystal forms at a band filling of one electron per four moiré unit cells (ν = 1/4) and quadruples the unit-cell area, coinciding with an integer quantum anomalous Hall effect. The Chern number of the state is exceptionally tunable, and it can be switched reversibly between +1 and −1 by electric and magnetic fields. Several other topological electronic crystals arise in a modest magnetic field, originating from ν = 1/3, 1/2, 2/3 and 3/2. As a result, the quantum geometry of the interaction-modified bands is likely to be very different from that of the original parent band, which enables possible future discoveries of correlation-driven topological phenomena.

Electronic properties and materials↗

Understanding Reentrance in Frustrated Magnets: The Case of the Er 2 Sn 2 O 7 Pyrochlore

Reentrance, the return of a system from an ordered phase to a previously encountered less-ordered one as a controlled parameter is continuously varied, is a recurring theme found in disparate physical systems, yet its microscopic cause is often not investigated thoroughly. Here, through detailed characterization and theoretical modeling, we uncover the microscopic mechanism behind reentrance in the strongly frustrated pyrochlore antiferromagnet Er 2 Sn 2 O 7 . We use single crystal heat capacity measurements to expose that Er 2 Sn 2 O 7 exhibits multiple instances of reentrance in its magnetic field B vs temperature T phase diagram for magnetic fields along three cubic high symmetry directions. Through classical Monte Carlo simulations, mean field theory, and classical linear spin-wave expansions, we argue that the origins of the multiple occurrences of reentrance observed in Er 2 Sn 2 O 7 are linked to soft modes. These soft modes arise from phase competition and enhance thermal fluctuations that entropically stabilize a specific ordered phase, resulting in an increased transition temperature for certain field values and thus the reentrant behavior. Our work represents a detailed examination into the mechanisms responsible for reentrance in a frustrated magnet and may serve as a template for the interpretation of reentrant phenomena in other physical systems.

36 MATERIALS SCIENCE↗

Test of the Dynamic-Domain and Critical Scattering Hypotheses in Cubic Methylammonium Lead Triiodide

We investigate the hypothesis of dynamic tetragonal domains occurring in cubic CH 3 NH 3 PbI 3 using high-resolution neutron spectroscopy to study a fully deuterated single crystal. The R-point scattering above the 327.5 K cubic-tetragonal phase transition is always resolution limited in energy and therefore inconsistent with dynamic-domain predictions. This behavior is instead consistent with the central peak phenomenon observed in other perovskites. Here, the scattering may originate from small, static, tetragonal-phase domains nucleating about crystal defects, and the temperature dependence demonstrates the transition is first order.

14 SOLAR ENERGY↗

Machine learning-driven descriptions of protein dynamics at solid-liquid interfaces

This chapter has described how ML has enabled quantitative analysis of HS-AFM data to discover the physical phenomena governing protein dynamics and ordering at solid-liquid interfaces. The research detailed in this chapter modeled the rotation models of protein nanorods, the discovery of which would otherwise not be possible. By tracking the trajectories of individual protein rods from frame to frame, it was possible to model Brownian type motion and behaviors and Levy-flight dynamics that had not previously been shown. We also described the application of the Python package AtomAI, which has been developed specifically to analyze and extract physical phenomena, providing exemplar code for training an ensemble of deep neural networks to produce the semantic segmentation of AFM data and functions for encoding and decoding local environments. We last described a combinatorial approach to analyze very noisy data with a densely covered substrate where the emergence of order for the protein liquid crystals could be elucidated. By combining the methods from Case 1 and 2, it was possible to obtain the center of mass and angle for each rod in the images and track the assembly of the rods over time into a 2D liquid crystal array on the surface of mica.

protein dynamics, solid-liquid interfaces, atomic ↗

Dynamic Nanocrystal Superlattices with Thermally Triggerable Lubricating Ligands

The size-dependent and collective physical properties of nanocrystals (NCs) and their self-assembled superlattices (SLs) enable the study of mesoscale phenomena and the design of metamaterials for a broad range of applications. However, the limited mobility of NC building blocks in dried NCSLs often hampers the potential for employing postdeposition methods to produce high-quality NCSLs. In this study, we present tailored promesogenic ligands that exhibit a lubricating property akin to thermotropic liquid crystals. The lubricating ability of ligands is thermally triggerable, allowing the dry solid NC aggregates deposited on the substrates with poor ordering to be transformed into NCSLs with high crystallinity and preferred orientations. The interplay between the dynamic behavior of NCSLs and the molecular structure of the ligands is elucidated through a comprehensive analysis of their lubricating efficacy using both experimental and simulation approaches. Coarse-grained molecular dynamic modeling suggests that a shielding layer from mesogens prevents the interdigitation of ligand tails, facilitating the sliding between outer shells and consequently enhancing the mobility of NC building blocks. Further, the dynamic organization of NCSLs can also be triggered with high spatial resolution by laser illumination. The principles, kinetics, and utility of lubricating ligands could be generalized to unlock stimuli-responsive metamaterials from NCSLs and contribute to the fabrication of NCSLs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonsymmorphic symmetry-protected band crossings in a square-net metal PtPb 4

Topological semimetals with symmetry-protected band crossings have emerged as a rich landscape to explore intriguing electronic phenomena. Nonsymmorphic symmetries in particular have been shown to play an important role in protecting the crossings along a line (rather than a point) in momentum space. Here we report experimental and theoretical evidence for Dirac nodal line crossings along the Brillouin zone boundaries in PtPb 4 , arising from the nonsymmorphic symmetry of its crystal structure. Interestingly, while the nodal lines would remain gapless in the absence of spin–orbit coupling (SOC), the SOC, in this case, plays a detrimental role to topology by lifting the band degeneracy everywhere except at a set of isolated points. Nevertheless, the nodal line is observed to have a bandwidth much smaller than that found in density functional theory (DFT). Our findings reveal PtPb 4 to be a material system with narrow crossings approximately protected by nonsymmorphic crystalline symmetries.

36 MATERIALS SCIENCE↗

Inductance meets memory in a quantum magnet

Orbital degrees of freedom offer a largely untapped route to emergent dynamical phenomena in correlated quantum materials. However, it remains unclear whether collective orbital states can intrinsically generate both reactive and memory functionalities in a bulk system. Here we show that in the ferrimagnet Mn₃Si₂Te₆, nonequilibrium reconfiguration of chiral orbital currents produces both emergent inductance and nonvolatile memristance as intrinsic properties of a single crystal. At low frequency and under a magnetic field along the c axis, coherent orbital-current domains generate robust clockwise inductive I-V loops. At higher frequency and low field, current-driven first-order reconfiguration leads to incomplete reversal and metastable trapping, producing an intrinsic electromotive force and a finite remanent voltage at zero current. These results establish orbital currents as a class of quantum state variables that encode both reactive and memory functionalities, opening routes toward intrinsically reconfigurable and energy-efficient electronic systems.

Cao, Tristan [University of Colorado, Boulder]↗

Phase Pattern Formation in Grain Boundaries

Here, in this Letter, we derive conditions that predict the existence of two-phase periodic-pattern grain boundary structures that are stable against coarsening. While previous research has established that elastic effects can lead to phase pattern formation on crystal surfaces, the possibility of stable grain boundary structures composed of alternating grain boundary phases has not been previously analyzed. Our theory identifies the specific combination of grain boundary and materials properties that enable the emergence of patterned grain boundary states and shows that the dislocation content of grain boundary phase junctions, absent in surface phenomena, weakens the stability of the patterned structures. The predictions of the theory are tested using a model copper grain boundary that exhibits multiple phases and two-phase pattern formation. We discuss how, similarly to surfaces, elastic effects associated with grain boundary phase junctions have profound implications for how grain boundary phases transform.

36 MATERIALS SCIENCE↗

Entanglement between a muon spin and $I>\frac{1}{2}$ nuclear spins

We report on the first example of quantum coherence between the spins of muons and quadrupolar nuclei. We observe this effect in vanadium intermetallic compounds which adopt the A15 crystal structure, and whose members include all technologically dominant superconductors. The entangled states are extremely sensitive to the local structural and electronic environments through the electric field gradient at the quadrupolar nuclei. This case-study demonstrates that positive muons can be used as a quantum sensing tool to probe also structural and charge related phenomena in materials, even in the absence of magnetic order.

Bonfà, Pietro↗