Search NASA⌕ Search

SEARCH · Search NASA

Results for “density of states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Multifractally-enhanced superconductivity in thin films

The multifractal superconducting state originates from the interplay of Anderson localization and interaction effects. In this article we overview the recent theory of the superconductivity enhancement by multifractality and extend it to describe the spectral properties of superconductors on the scales of the order of the superconducting gap. Specifically, using the approach based on renormalization group within the nonlinear sigma model, we develop the theory of a multifractal superconducting state in thin films. We derive a modified Usadel equation that incorporates the interplay of disorder and interactions at energy scales larger than the spectral gap and study the effect of such an interplay on the low-energy physics. We determine the spectral gap at zero temperature which occurs to be proportional to the multifractally enhanced superconducting transition temperature. The modified Usadel equation results in the disorder-averaged density of states that, near the spectral gap, resembles the one obtained in the model of a spatially random superconducting order parameter. We reveal strong mesoscopic fluctuations of the local density of states in the superconducting state. Such strong mesoscopic fluctuations imply that the interval of energies in which the superconducting gap establishes is parametrically large in systems with multifractally-enhanced superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

KCo 2 As 2 : A new portal for the physics of high-purity metals

High-quality single crystals of KCo 2 As 2 with the body-centered tetragonal ThCr 2 Si 2 structure were grown using KAs self flux. Structural, magnetic, thermal, and electrical transport properties were investigated. No clear evidence for any phase transitions was found in the temperature range 2–300 K. The in-plane electrical resistivity ρ versus temperature T is highly unusual, showing a T 4 behavior below 30 K and an anomalous positive curvature up to 300 K, which is different from the linear behavior expected from the Bloch-Grüneisen theory for electron scattering by acoustic phonons. This positive curvature has been previously observed in the in-plane resistivity of high-conductivity layered delafossites such as PdCoO 2 and PtCoO 2 . The in-plane ρ(T → 0) = 0.36μΩ cm of KCo 2 As 2 is exceptionally small for this class of compounds. The material also exhibits a magnetoresistance at low T which attains a value of about 40% at T = 2 K and magnetic field H = 80 kOe. The magnetic susceptibility χ of KCo 2 As 2 is isotropic and about an order of magnitude smaller than the values for the related compounds SrCo 2 As 2 and BaCo 2 As 2 . The χ increases above 100 K, which is found from our first-principles calculations to arise from a sharp peak in the electronic density of states just above the Fermi energy E F . Heat capacity C p (T) data at low T yield an electronic density of states N(E F ) that is about 36% larger than predicted by the first-principles theory. The C p (T) data near room temperature suggest the presence of excited optic vibration modes, which may also be the source of the positive curvature in ρ(T). Angle-resolved photoemission spectroscopy measurements are compared with the theoretical predictions of the band structure and Fermi surfaces. In conclusion, our results show that KCo 2 As 2 provides a new avenue for investigating the physics of high-purity metals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electronic Structure and Mechanical Properties of Solvated Montmorillonite Clay Using Large-Scale DFT Method

Montmorillonite clay (MMT) has been widely used in engineering and environmental applications as a landfill barrier and toxic waste repository due to its unique property as an expandable clay mineral that can absorb water easily. This absorption process rendered MMT to be highly exothermic due to electrostatic interactions among molecules and hydrogen bonds between surface atoms. A detailed study of a large supercell model of structural clay enables us to predict long-term nuclear waste storage. Herein, a large solvent MMT model with 4071 atoms is studied using ab initio density functional theory. The DFT calculation and analysis clarify the important issues, such as bond strength, solvation effect, elasticity, and seismic wave velocities. These results are compared to our previous study on crystalline MMT (dry). The solvated MMT has reduced shear modulus (G), bulk modulus (K), and Young’s modulus (E). We observe that the conduction band (CB) in the density of states (DOS) of solvated MMT model has a single, conspicuous peak at –8.5 eV. Moreover, the atom-resolved partial density of states (PDOS) summarizes the roles played by each atom in the DOS. These findings illuminate numerous potential sophisticated applications of MMT clay.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Controlling interactions between high-frequency phonons and single quantum systems using phononic crystals

The ability to control phonons in solids is key in many fields of quantum science, ranging from quantum information processing to sensing. Phonons often act as a source of noise and decoherence when solid-state quantum systems interact with the phonon bath of their host matrix. In this study, we demonstrate the ability to control the phononic local density of states of the host matrix using phononic crystals and measure its positive impact on single quantum systems. We design and fabricate diamond phononic crystals with features down to around 20 nm, resulting in a high-frequency complete phononic bandgap from 50 to 70 GHz. The engineered local density of states is probed using single silicon-vacancy colour centres embedded in the phononic crystals. We observe an 18-fold reduction in the phonon-induced orbital relaxation rate of the emitters compared to bulk, thereby demonstrating that the phononic crystal suppresses spontaneous single-phonon processes. Furthermore, we show that our approach can efficiently suppress single-phonon-emitter interactions up to 20 K, allowing the investigation of multi-phonon processes in the emitters. Our results represent an important step towards the realization of efficient phonon-emitter interfaces that can be used for quantum acoustodynamics and quantum phononic networks.

quantum information↗
DOE OSTI2022

Bandgap analysis and carrier localization in cation-disordered ZnGeN 2

The bandgap of ZnGeN 2 changes with the degree of cation site disorder and is sought in light emitting diodes for emission at green to amber wavelengths. By combining the perspectives of carrier localization and defect states, we analyze the impact of different degrees of disorder on electronic properties in ZnGeN 2 , addressing a gap in current studies, which largely focus on dilute or fully disordered systems. The present study demonstrates changes in the density of states and localization of carriers in ZnGeN 2 calculated using bandgap-corrected density functional theory and hybrid calculations on partially disordered supercells generated using the Monte Carlo method. We use localization and density of states to discuss the ill-defined nature of a bandgap in a disordered material and identify site disorder and its impact on the structure as a mechanism controlling electronic properties and potential device performance. Decreasing the order parameter results in a large reduction of the bandgap. The reduction in bandgap is due, in part, to isolated, localized states that form above the valence band continuum associated with nitrogen coordinated by more zinc than germanium. The prevalence of defect states in all but the perfectly ordered structure creates challenges for incorporating disordered ZnGeN 2 into optical devices, but the localization associated with these defects provides insight into the mechanisms of electron/hole recombination in the material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Liquid-like dynamics in a solid-state lithium electrolyte

Superionic materials represent a regime intermediate between the crystalline and liquid states of matter. Despite the considerable interest in potential applications for solid-state batteries or thermoelectric devices, it remains unclear whether the fast ionic diffusion observed in superionic materials reflects liquid-like dynamics or whether the hops of mobile ions are inherently coupled to more conventional lattice phonons. Here we reveal a crossover from crystalline vibrations to relaxational dynamics of ionic diffusion in the superionic compound Li 6 PS 5 Cl, a candidate solid-state electrolyte. By combining inelastic and quasi-elastic neutron-scattering measurements with first-principles-based machine-learned molecular dynamics simulations, we found that the vibrational density of states in the superionic state strongly deviates from the quadratic behaviour expected from the Debye law of lattice dynamics. The superionic dynamics emerges from overdamped phonon quasiparticles to give rise to a linear density of states characteristic of instantaneous normal modes in the liquid state. Further, we showed that the coupling of lattice phonons with a dynamic breathing of the Li+ diffusion bottleneck enables an order-of-magnitude increase in diffusivity. Thus, our results shed insights into superionics for future energy storage and conversion technologies.

25 ENERGY STORAGE↗
DOE OSTI2025

Enhancing the Multifunctional Photocatalytic Activity of Sustainable Magnetic Nanoparticles

The development of efficient photocatalytic materials has intensified in response to increasing emphasis on sustainable energy conversion and environmental restoration. However, the excessive use and indiscriminate release of heavy metals from photocatalytic nanoparticles pose potential environmental risks. This study provides insights into optimizing visible-light-active photocatalysts to enhance their photocatalytic properties and stability. Specifically, cobalt doping and controlled pH modulation are employed on the modified Fe 3 O 4 , forming two distinct samples: Co@Fe 3 O 4 -B (base-treated) and Co@Fe 3 O 4 -A (acid-treated) nanoparticles. Microscopic characterization reveals that Co@Fe 3 O 4 -A undergoes a phase transition to hematite, whereas Co@Fe 3 O 4 -B retains its mixed-phase configuration. Spectroscopic analyses confirm that the cobalt dopants decorate the outskirts of each nanoparticle, forming a core–shell structure. However, Co@Fe 3 O 4 -B exhibit Co 2+ states with a high oxygen vacancy content, whereas Co@Fe 3 O 4 -A contain mixed Co 2+/3+ states. The high density of defect states in the Co@Fe 3 O 4 -B results in superior photocatalytic efficiency, achieving near-complete oxidation of furfuraldehyde (97% conversion) and 5-hydroxymethylfurfural (94% conversion), as well as effective degradation of toluene (78% conversion). This study demonstrates that the combined approach of doping and pH treatment is promising for the surface-defect engineering of photocatalysts, enhancing their multifunctional performance and reusability for sustainable energy conversion.

Fe3 O4 nanoparticles↗
DOE OSTI2022

BiCuI 4 (Pyridine) 5 a neutral ligand-supported compound of BiI 3 and CuI

Reaction of equimolar pyridine (Py) solutions BiI 3 and CuI produces the Py-supported 1:1 bimetallic complex BiCuI 4 (Py) 5 in quantitative yield. The title complex is only the second neutral complex to feature Cu–I–Bi bridging and shows an octahedral trans-[BiI 4 (Py) 2 ] unit joined to a distorted tetrahedral CuI(Py) 3 unit by an iodide bridge. The complex shows low thermal stability, decomposing under modest heating or vacuum to produce a mixture of BiI 3 and CuI. Thus, it is a potential entry/precursor to BiI 3 /CuI chemistry. Natural Localized Molecular Orbital (NLMO) calculations were performed to analyze the nature of the Cu–I–Bi bonds, revealing that the title compound lies on the cusp of being [Cu(Py) 3 ] + [BiI 4 (Py) 2 ] – . Diffuse reflectance spectroscopy measurements show a strong absorption band with an optical bandgap energy of 1.94 eV. Theoretical density of states (DOS) and time-dependent density functional theory (TD-DFT) experiments to map the electronic structure assign the primary electronic transition as a mixed halide/metal-to-ligand charge transfer between Cu–I–Bi donor orbitals and Py π* acceptor orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Computational and Experimental Mechanistic Insights into the Ethanol-to-Butanol Upgrading Reaction over MgO

The mechanism of ethanol upgrading to higher products is still under debate, especially regarding intermediate species and hydrogenation and dehydrogenation steps. In this work, we conducted a combined theoretical and experimental approach to contribute to this discussion. For such, detailed electronic structure density functional theory calculations (aiming at probing density of states, infrared spectra, geometric parameters, charge densities, and reaction energetics) and diffuse reflectance infrared Fourier transform spectroscopy experiments were carried out revealing the relevance of an appropriate combination of reactive surface sites to support the formation of several intermediates that are formed in the C-C coupling over MgO. The roles of Mg and O sites were also studied under an electronic perspective and different geometrical arrangements. We found that a kink configuration was the most adequate for ethanol to 1-butanol upgrading. Our calculations also gave us arguments to propose distinct reaction routes, whose mutual predominance would depend upon reaction temperature. At temperatures up to 573 K, the so-called β-route, which goes through scission of a Cβ-H bond and formation of an oxametallacycle-like intermediate, would dominate the coupling, whereas at higher temperatures, up to 673 K, a more usual Guerbet mechanism, via an aldol coupling step and then consecutive hydrogenations, would be expected. Here, the theoretical conclusions were followed by a careful experimental strategy using sequential experimental planning techniques in order to estimate accurate parameters with the lowest possible experimental load. Information from these different sources were coupled to develop a mathematical model for the rate of the ethanol upgrading reaction, using a Langmuir-Hinshelwood-Hougen-Watson approach. The developed and statistically validated model adequately described the experimental data at 673 K and 1.1 bar total pressure for ethanol partial pressures in the range from 0 to 20 kPa.

09 BIOMASS FUELS↗
DOE OSTI2023

Spectral theorems for generalized Weyl nodes with impurities in a magnetic field

Here, we prove a few spectral theorems for the density of states of a Weyl node with arbitrary topology. We show that the density of extended states of a Weyl node with random impurity potentials remains gapless in the presence of a magnetic field. Therefore, a magnetic field precludes Anderson localization in Weyl semimetals, when internode transitions are suppressed for smooth enough potentials. We also provide a rigorous quantum mechanical proof of the chiral magnetic effect for arbitrary topology of a Weyl node.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Beyond the universal Dyson singularity for 1-D chains with hopping disorder

We study a simple non-interacting nearest neighbor tight-binding model in one dimension with disorder, where the hopping terms are chosen randomly. This model exhibits a well-known singularity at the band center both in the density of states and localization length. If the probability distribution of the hopping terms is well-behaved, then the singularities exhibit universal behavior, the functional form of which was first discovered by Freeman Dyson in the context of a chain of classical harmonic oscillators. We show here that this universal form can be violated in a tunable manner if the hopping elements are chosen from a divergent probability distribution. We also demonstrate a connection between a breakdown of universality in this quantum problem and an analogous scenario in the classical domain — that of random walks and diffusion with anomalous exponents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Application of the locally self-consistent embedding approach to the Anderson model with non-uniform random distributions

Highlights: • Typical Medium Theory (TMT) for the Anderson Localization. • Locally Self-Consistent Multiple Scattering Method (LSMS) for Random Disordered Systems. • Linear Scaling Computational Method for Random Disordered Systems. We apply the recently developed embedding scheme for the locally self-consistent method to random disorder electrons systems. The method is based on the locally self-consistent multiple scattering theory and the typical medium theory. The locally self-consistent multiple scattering theory divides a system into many small designated local interaction zones. The subsystem within each local interaction zone is embedded in a self-consistent field from the typical medium theory. This approximation allows the study of random systems with large numbers of sites. We present results for the three dimensional Anderson model with different random disorder potential distributions. Using the typical density of states as an indicator of Anderson localization, we find that the method can capture the localization for commonly studied disorder potentials. These include the uniform distribution, the Gaussian distribution, and even the unbounded Cauchy distribution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Semiclassical transition state theory through the lens of the restricted partition function

The wide adoption of transition state theory in resolving the rates of molecular processes relies on the simplification from reducing the formal and numerical expense of dynamics by a geometric constraint. Such a reduction is at odds with the uncertainty in localization that the uncertainty principle requires. While many forms of semiclassical transition state theory (SCTST) have been aimed at addressing this challenge, a popular approach has relied on resolving the underlying phase space structure of the exact rate formula to leverage Bohr–Sommerfeld quantization. Here, the Hernandez–Miller SCTST reframed the thermal rate formula into an integral of the so-called restricted partition function (RPF) over the action associated with the reaction. The density-of-state SCTST has reframed the rate formula in terms of the instanton’s density of states (DoS). Here, we show the relationship between the RPF-SCTST and the DoS-SCTST and derive the latter from the former. In this way, we help unify these branches of SCTST and provide a clearer formalism for future advances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Noncentrosymmetric Polymorph of LuRuGe

In this work, we report a new polymorph of LuRuGe, obtained in indium flux. This phase exhibits the noncentrosymmetric ZrNiAl-type structure with the space group $Ρ\bar 62m$ as determined by single-crystal X-ray diffraction. This polymorph can convert into another centrosymmetric polymorph (TiNiSi-type structure, space group Pnma ) at high temperatures. In this work, we performed electrical transport, magnetization, and specific heat measurements on this new phase. It shows metallic behavior with a Hall sign change from negative at 2 K to positive at 125 K. LuRuGe exhibits Pauli paramagnetism as the ground state with no local magnetic moments from either the Ru or Lu site. The Debye temperature Θ = 348 K and electronic coefficient γ e = 3.6 mJ K –2 mol –1 are extracted from the low-temperature specific heat data in LuRuGe. We also carried out first-principles density functional theory calculations to map out the electronic band structure and density of states. There are several electronic bands crossing the Fermi level, supporting a multiband scenario consistent with the Hall sign change. The density of states around the Fermi level is mainly from Ru 4d and Ge 4p electrons, indicating a strong hybridization between those atomic orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sm 2 Ru 3 Sn 5 : A Noncentrosymmetric Cubic Member of the Ln 2 M 3 X 5 Family

An optimized synthetic method is presented for Sm 2 Ru 3 Sn 5 and investigate its physical properties and electronic structure. Sm 2 Ru 3 Sn 5 is prepared by arc-melting stoichiometric ratios of the elements and is confirmed by single crystal and powder X-ray diffraction. An antiferromagnetic transition is observed at T N = 3.8 K. A modified Curie-Weiss fit to the data in the range 50–150 K yields a Curie-Weiss temperature: θ CW = −36.6 K and an effective magnetic moment: μ eff = 0.83 μ B , in agreement with a Sm 3+ oxidation state. Field-dependent magnetization up to H = 7 T at 2 K shows a maximum response of 0.06 μ B , which is significantly lower than the expected Sm 3+ saturation moment (0.71 μ B ). Resistivity measurements indicate metallic behavior, and analysis of the magnetic entropy from the heat capacity reveals a doublet ground state due to crystal electric field splitting. The electronic structure and density of states are calculated with density function theory and further supported by the local density approximation with dynamical mean-field theory. Finally, the experimental and computational results highlight localized Sm 3+ moments and suggest a possible interplay between Ruddelman–Kitel–Kasuya–Yosida and Kondo interactions, positioning Sm 2 Ru 3 Sn 5 as a promising material for studying topology and complex physical phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Superconductivity in Y 4 RuGe 8 with a Vacancy-Ordered CeNiSi 2 -Type Superstructure

In this work, we report a new compound, Y 4 RuGe 8 , with a transition metal vacancy-ordered CeNiSi 2 -type superstructure, which has a superconducting transition at 1.3 K. Y 4 RuGe 8 crystals were grown by indium flux at relatively low temperatures (below 1273 K), which makes it possible to stabilize such a vacancy-ordered phase. The crystal structure of Y 4 RuGe 8 was solved by single-crystal X-ray diffraction and confirmed by transmission electron microscopy. The as-grown Y 4 RuGe 8 crystals are always twinned, crystallizing in the space group $P\bar{1}$(no. 2) with the lattice parameters a = 5.7680(1) Å, b = 8.2042(2) Å, c = 11.5093(3) Å, α = 79.696(1)degrees, β = 88.491(1)degrees, and γ = 79.637(2)degrees; this structure is a superstructure deriving from the higher symmetry CeNiSi 2 -type structure (Cmcm, no. 63) due to the ordering of Ru vacancies. The ordering of Ru sites breaks slightly distorted Ge planes in the CeNiSi 2 prototype into infinite cis-trans Ge chains in Y 4 RuGe 8 . The presence of bulk superconductivity in Y 4 RuGe 8 is well supported by zero resistance and a jump in specific heat at the critical transition temperature. The Sommerfeld coefficient (19 mJ K -2 mol -1 ) of the specific heat is greater than that (11 mJ K -2 mol -1 ) estimated using the bare density of states (4.7 states/eV/f.u.) from first-principles calculations. The ab initio calculations indicate that 4d electrons of both Y and Ru and 4p electrons of Ge are the main contributors to the total density of states at the Fermi level in Y 4 RuGe 8 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Habitat-specific seasonal densities of sympatric raccoons and opossums in the southeastern United States

Raccoon and opossum densities have implications for rabies management, but estimates of seasonal densities of both species are lacking for rural nonagricultural habitats of the southeastern United States, a core portion of their geographic range. Consequently, it remains unclear whether the densities of 1 species limit the other, which is possible considering their substantial niche overlap. We carried out a mark–recapture study of raccoons and opossums in 4 rural nonagricultural habitats (bottomland hardwood forest, riparian forest, upland pine forest, and isolated wetlands) in South Carolina, United States (2020 to 2022), and combined this with previous data from the same habitats (2017 to 2019) to estimate habitat-specific spring and fall densities. Raccoon densities ranged from 5.17 ± 0.96 animals/km 2 (bottomland hardwood fall) to 1.63 ± 0.83 animals/km 2 (upland pine spring) and were on average 19% higher in fall compared to spring. Opossum densities ranged from 10.35 ± 1.98 animals/km 2 (bottomland hardwood fall) to 1.11 ± 1.55 animals/km 2 (upland pine spring) with divergent seasonal patterns among habitats. These low densities across all habitats compared to other studies are likely the result of low resource availability, consistent with other habitats that have minimal anthropogenic influence. We observed a positive association between raccoon and opossum densities across trapping grids, suggesting that raccoons do not suppress opossum densities, but that densities of both species increase with increasing resource availability. Furthermore, our results can be used to inform oral rabies vaccination efforts such as refining bait densities and timing of bait distribution in these habitats.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Anomalously Large Seebeck Coefficient of CuFeS 2 Derives from Large Asymmetry in the Energy Dependence of Carrier Relaxation Time

The Seebeck effect in a material originates from the distribution of asymmetry in the electron transport under a temperature gradient, which has contributions from the energy-dependent electronic density-of-states and carrier mobility. However, because the energy dependence of common electron scattering mechanisms is weak, the mobility-driven Seebeck coefficient has long been ignored in most thermoelectric materials, and the energy asymmetry of the density-of-states has been considered the dominant contribution. In this work, we describe a hopping transport behavior observed in CuFeS 2 , and a large carrier Hall mobility gradient of dμH/dT that creates an unusually large energy-dependent mobility contribution to the Seebeck coefficient. This work offers several ideas regarding the mobility-driven Seebeck effect and its potential utilization in the design of thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗