Search NASA⌕ Search

SEARCH · Search NASA

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A numerical analysis of a magnetocaloric refrigerator with a 16-layer regenerator

A numerical analysis was conducted to study a room temperature magnetocaloric refrigerator with a 16-layer parallel plates active magnetic regenerator (AMR). Sixteen layers of LaFeMnSiH having different Curie temperatures were employed as magnetocaloric material (MCM) in the regenerator. Measured properties data was used. A transient one dimensional (1D) model was employed, in which a unique numerical method was developed to significantly accelerate the simulation speed of the multi-layer AMR system. As a result, the computation speed of a multi-layer AMR case was very close to the single-layer configuration. The performance of the 16-layer AMR system in different frequencies and utilizations has been investigated using this model. To optimize the layer length distribution of the 16-layer MCMs in the regenerator, a set of 137 simulations with different MCM distributions based on the Design of Experiments (DoE) method was conducted and the results were analyzed. The results show that the 16-layer AMR system can operate up to 84% of Carnot cycle COP at a temperature span of 41 K, which cannot be obtained using an AMR with fewer layers. Here, the DoE results indicate that for a 16-layer AMR system, the uniform distribution is very close to the optimized design.

36 MATERIALS SCIENCE↗

Synthetic-domain computing and neural networks using lithium niobate integrated nonlinear phononics

Analogue computing uses the physical behaviours of devices to provide energy-efficient arithmetic operations. However, scaling up analogue computing platforms by simply increasing the number of devices leads to challenges such as device-to-device variation. Here, in this study, we report scalable analogue computing and neural networks in the synthetic frequency domain using an integrated nonlinear phononic platform on lithium niobate. This synthetic-domain computing is robust to device variations, as vectors and matrices are concurrently encoded at different frequencies within a single device, achieving a high throughput per area. Leveraging inherent nonlinearities, our device-aware neural network can perform a four-class classification task with an accuracy of 98.2%. The nonlinear phononic computing hardware also maintains consistent performance over a wide operational temperature range (characterized up to 192 °C). Our synthetic-domain computing combines single-device parallelism, inherent nonlinearity and environmental stability, and could be of use in edge computing applications in which power efficiency and environmental resilience are crucial.

Ji, Jun [Virginia Polytechnic Inst. and State Univ↗

The Simons Observatory: Beam Characterization for the Small Aperture Telescopes

Abstract We use time-domain simulations of Jupiter observations to test and develop a beam reconstruction pipeline for the Simons Observatory Small Aperture Telescopes. The method relies on a mapmaker that estimates and subtracts correlated atmospheric noise and a beam fitting code designed to compensate for the bias caused by the mapmaker. We test our reconstruction performance for four different frequency bands against various algorithmic parameters, atmospheric conditions, and input beams. We additionally show the reconstruction quality as a function of the number of available observations and investigate how different calibration strategies affect the beam uncertainty. For all of the cases considered, we find good agreement between the fitted results and the input beam model within an ∼1.5% error for a multipole range ℓ = 30–700 and an ∼0.5% error for a multipole range ℓ = 50–200. We conclude by using a harmonic-domain component separation algorithm to verify that the beam reconstruction errors and biases observed in our analysis do not significantly bias the Simons Observatory r -measurement

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Survivability of Autonomous Microgrid during Overload Events

Grid-forming sources are voltage sources that draw necessary currents to meet any load changes. A load step can cause part or all of these sources to become overloaded in a microgrid. This paper presents an overload mitigation controller that addresses the two overload issues in a microgrid by actively controlling the sources’ frequency. When part of the sources in a microgrid is overloaded, the controller autonomously transfers the extra load to other sources by rapidly reducing its frequency. The frequency difference between sources during transient results in a change of phase angle, which redistributes the power flow. When all sources in a microgrid are overloaded, each source keeps dropping the frequency. Therefore, under frequency load shedding can be used to trip the non-critical loads resulting in the survival of microgrid. The advantages of these concepts are that communications between sources are not needed during transient, and the robust voltage control is maintained. Lastly, simulation and field tests from CERTS/AEP microgrid test site verify that the control strategy is effective in both purely inverter-based microgrids and inverter & generator mixed microgrids.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Sputter deposition of thin film MIM capacitors on LTCC substrates for RF bypass and filtering applications

Thin film capacitors for RF bypass and filtering applications were sputter deposited onto low temperature co-fired ceramic (LTCC) substrates. The capacitors were configured in a metal-insulator-metal (MIM) design featuring 200 nm thick Al electrodes and a 300 nm thick Al{sub 2}O{sub 3} dielectric layer, with dimensions varied between ~150x150 μm and ~750x750 μm. DC current-voltage measurements (E ≤ 5 MV/cm) coupled with impedance analysis (≤15 MHz) was used to characterize the resulting devices. More than 90% of the devices functioned as capacitors with high DC resistance (>20 MΩ) and low loss (tan δ <0.1). A second set of capacitors were made under the same experimental conditions with device geometries optimized for high frequency (≥200 MHz) applications. These capacitors featured temperature coefficient of capacitance (TCC) values between 500 and 1000 ppm/°C as well as low loss and high self-resonant frequency performance (ESR <0.6 Ohms at self-resonance of 5.7 GHz for 82 pF). Capacitance and loss values were comparable between the capacitor structures of similar areas at the different frequency regimes.

36 MATERIALS SCIENCE↗

Reducing Frequency Bias of Fourier Neural Operators in 3D Seismic Wavefield Simulations Through Multistage Training

The recent development of neural operator (NeurOp) learning for solutions to the elastic wave equation shows promising results and provides the basis for fast large-scale simulations for different seismological applications. In this article, we use the Fourier neural operator (FNO) model to directly solve the 3D Helmholtz wave equation for fast seismic ground-motion simulations on different frequencies and show the frequency bias of the FNO model, that is, it learns the lower frequencies better comparing to the higher frequencies. To reduce the frequency bias, we adopt the multistage FNO training, that is, after training a stage 1 FNO model for estimating the ground motion, we use a second FNO model as the stage 2 to learn from the residual, which greatly reduced the errors on the higher frequencies. By adopting this multistage training, the FNO models show reduced biases on higher frequencies, which enhanced the overall results of the ground-motion simulations. Thus the multistage training FNO improves the accuracy and realism of the ground-motion simulations.

earthquakes↗

Mechanism and computational model for Lyman-{alpha}-radiation generation by high-intensity-laser four-wave mixing in Kr-Ar gas

We present a theoretical model combined with a computational study of a laser four-wave mixing process under optical discharge in which the non-steady-state four-wave amplitude equations are integrated with the kinetic equations of initial optical discharge and electron avalanche ionization in Kr-Ar gas. The model is validated by earlier experimental data showing strong inhibition of the generation of pulsed, tunable Lyman-{alpha} (Ly-{alpha}) radiation when using sum-difference frequency mixing of 212.6 nm and tunable infrared radiation (820-850 nm). The rigorous computational approach to the problem reveals the possibility and mechanism of strong auto-oscillations in sum-difference resonant Ly-{alpha} generation due to the combined effect of (i) 212.6-nm (2+1)-photon ionization producing initial electrons, followed by (ii) the electron avalanche dominated by 843-nm radiation, and (iii) the final breakdown of the phase matching condition. The model shows that the final efficiency of Ly-{alpha} radiation generation can achieve a value of {approx}5x10{sup -4} which is restricted by the total combined absorption of the fundamental and generated radiation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ultra-broadband mid-infrared generation in dispersion-engineered thin-film lithium niobate

Thin-film lithium niobate (TFLN) is an emerging platform for compact, low-power nonlinear-optical devices, and has been used extensively for near-infrared frequency conversion. Recent work has extended these devices to mid-infrared wavelengths, where broadly tunable sources may be used for chemical sensing. To this end, we demonstrate efficient and broadband difference frequency generation between a fixed 1-µm pump and a tunable telecom source in uniformly-poled TFLN-on-sapphire by harnessing the dispersion-engineering available in tightly-confining waveguides. We show a simultaneous 1–2 order-of-magnitude improvement in conversion efficiency and ∼5-fold enhancement of operating bandwidth for mid-infrared generation when compared to equal-length conventional lithium niobate waveguides. We also examine the effects of mid-infrared loss from surface-adsorbed water on the performance of these devices.

47 OTHER INSTRUMENTATION↗

Quasi-periodicity of Supermassive Binary Black Hole Accretion Approaching Merger

In this paper we continue the first ever study of magnetized mini-disks coupled to circumbinary accretion in a supermassive binary black hole (SMBBH) approaching merger reported in Bowen et al. We extend this simulation from 3 to 12 binary orbital periods. We find that relativistic SMBBH accretion acts as a resonant cavity, where quasi-periodic oscillations tied to the frequency at which the black hole's (BH's) orbital phase matches a nonlinear m = 1 density feature, or "lump," in the circumbinary accretion disk permeate the system. Here, the rate of mass accretion onto each of the mini-disks around the BHs is modulated at the beat frequency between the binary frequency and the lump's mean orbital frequency, i.e., ${{\rm{\Omega }}}_{\mathrm{beat}}={{\rm{\Omega }}}_{\mathrm{bin}}-{\bar{{\rm{\Omega }}}}_{\mathrm{lump}}$, while the total mass accretion rate of this equal-mass binary is modulated at two different frequencies, $\gtrsim {\bar{{\rm{\Omega }}}}_{\mathrm{lump}}$ and $\approx 2{{\rm{\Omega }}}_{\mathrm{beat}}$. The instantaneous rotation rate of the lump itself is also modulated at two frequencies close to the modulation frequencies of the total accretion rate, ${\bar{{\rm{\Omega }}}}_{\mathrm{lump}}$ and $2{{\rm{\Omega }}}_{\mathrm{beat}}$. Because of the compact nature of the mini-disks in SMBBHs approaching merger, the inflow times within the mini-disks are comparable to the period on which their mass supply varies, so that their masses—and the accretion rates they supply to their BHs—are strongly modulated at the same frequency. In essence, the azimuthal symmetry of the circumbinary disk is broken by the dynamics of orbits near a binary, and this m = 1 asymmetry then drives quasi-periodic variation throughout the system, including both accretion and disk-feeding. In SMBBHs approaching merger, such time variability could introduce distinctive, increasingly rapid, fluctuations in their electromagnetic emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Moisture Modeling: Effective Moisture Penetration Depth Versus Effective Capacitance

This paper compares two moisture models in the context of residential whole-building simulations - the effective moisture penetration depth (EMPD) model and the effective capacitance (EC) model. Previous research has shown that the EMPD model provides a more physically realistic response to humidity-load fluctuations than the EC model. But it is unclear how the choice of moisture model affects overall conclusions informing building design and equipment selection. In this study, the models are evaluated based on their ability to predict relative humidity, predict energy use, and to select HVAC equipment. Whole building simulations indicate that the EC and EMPD models are not equivalent, and that combining the capacitance of the building materials with the indoor air capacitance in the EC model is the root cause of this discrepancy. It means that the EC model cannot dampen humidity loads of different frequencies. This study also showed that a simulation using a certain value of EC in one city can agree with the EMPD results, but that the same EC value in a different city may not agree with the EMPD results. However, the results showed that some conclusions drawn from simulations using the EMPD model and the EC model may often be the same, even if the results differ.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Terahertz generation by relativistic ponderomotive focusing of two co-axial Gaussian laser beams propagating in ripple density plasma

Terahertz (THz) generation by beating of two co-axial Gaussian laser beams, propagating in ripple density plasma, has been studied when both ponderomotive and relativistic nonlinearities are operative. When the two lasers co-propagate in rippled density plasma, electrons acquire a nonlinear velocity at beat frequency in the direction transverse to the direction of propagation. This nonlinear oscillatory velocity couples with the density ripple to generate a nonlinear current, which in turn generates THz radiation at the difference frequency. The necessary phase matching condition is provided by the density ripple. Relativistic ponderomotive focusing of the two lasers and its effects on yield of the generated THz amplitude have been discussed. Numerical results show that conversion efficiency of the order of 10{sup −3} can be achieved in the terahertz radiation generation with relativistic ponderomotive focusing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ON THE NATURE OF OFF-PULSE EMISSION FROM PULSARS

In our earlier studies, we reported the detection of off-pulse emission from two long-period pulsars B0525+21 and B2045-16. The pulsars were observed at a single epoch using the 325 MHz frequency band of the Giant Meterwave Radio Telescope (GMRT). In this paper, we report a detailed study of the off-pulse emission from these two pulsars using multiple observations at two different frequencies, 325 MHz and 610 MHz bands of GMRT. We report detection of off-pulse emission during each observation and based on the scintillation effects and spectral index of off-pulse emission we conclude a magnetospheric origin. The magnetospheric origin of off-pulse emission gives rise to various interesting possibilities about its emission mechanism and raises questions about the structure of the magnetosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Mid-infrared nonlinear optics in thin-film lithium niobate on sapphire

Periodically poled thin-film lithium niobate (TFLN) waveguides have emerged as a leading platform for highly efficient frequency conversion in the near-infrared. However, the commonly used silica bottom-cladding results in high absorption loss at wavelengths beyond 2.5 µm. In this work, we demonstrate efficient frequency conversion in a TFLN-on-sapphire platform, which features high transparency up to 4.5 µm. In particular, we report generating mid-infrared light up to 3.66 µm via difference-frequency generation of a fixed 1 µm source and a tunable telecom source, with normalized efficiencies up to 200 % <#comment/> / W c m 2 . These results show TFLN-on-sapphire to be a promising platform for integrated nonlinear nanophotonics in the mid-infrared.

36 MATERIALS SCIENCE↗

Structure-property correlation in epitaxial (2 0 0) rutile films on sapphire substrates

We have investigated the influence of the deposition variables on photocatalytic properties of epitaxial rutile films. Despite a large lattice misfit of rutile with sapphire substrate, (2 0 0) epitaxial layers were grown on (0 0 0 1)sapphire by domain matching epitaxy paradigm. Using {phi}-scan XRD and cross section TEM, the epitaxial relationship was determined to be rutile(1 0 0)||sapphire(0 0 0 1), rutile(0 0 1)||sapphire(1 0 -1 0), and rutile(0 1 0)||sapphire(1 -2 1 0). Based on the XRD patterns, increasing the repetition rate introduced tensile stress along the film normal direction, which may arise as a result of trapped defects. Formation of such defects was studied by UV-VIS, PL, and XPS techniques. AFM studies showed that the film roughness increases with the repetition rate. Finally, photocatalytic performance of the layers was investigated through measuring decomposition rate of 4-chlorophenol on the films surface. The films grown at higher frequencies revealed higher photocatalytic efficiency. This behavior was mainly related to formation of point defects which enhance the charge separation. - Graphical abstract: In this report, epitaxial rutile TiO{sub 2} thin films were deposited by PLD process under various deposition rates (frequencies) and their physical and chemical properties, especially photocatalytic performance, were investigated. It was found that photocatalytic efficiency improves when frequency increases. This behavior was mainly related to formation of point defects which enhance the charge separation. Highlights: Black-Right-Pointing-Pointer Rutile epitaxial thin films were deposited via PLD process under different frequencies. Black-Right-Pointing-Pointer Defect characteristic was studied. Black-Right-Pointing-Pointer Photocatalytic performance of the layers was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Realizing symmetry-guaranteed pairs of bound states in the continuum in metasurfaces

Abstract Bound states in the continuum (BICs) have received significant attention for their ability to enhance light-matter interactions across a wide range of systems, including lasers, sensors, and frequency mixers. However, many applications require degenerate or nearly degenerate high-quality factor ( Q ) modes, such as spontaneous parametric down conversion, non-linear four-wave mixing, and intra-cavity difference frequency mixing for terahertz generation. Previously, degenerate pairs of bound states in the continuum (BICs) have been created by fine-tuning the structure to engineer the degeneracy, yielding BICs that respond unpredictably to structure imperfections and material variations. Instead, using a group theoretic approach, we present a design paradigm based on six-fold rotational symmetry ( C 6 ) for creating degenerate pairs of symmetry-protected BICs, whose frequency splitting and Q -factors can be independently and predictably controlled, yielding a complete design phase space. Using a combination of resonator and lattice deformations in silicon metasurfaces, we experimentally demonstrate the ability to tune mode spacing from 2 nm to 110 nm while simultaneously controlling Q -factor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microwave photonic filter using multiwavelength Brillouin-erbium fiber laser with double-Brillouin-frequency shift

A microwave photonic filter based on double-Brillouin-frequency spaced multiwavelength Brillouin-erbium fiber laser (BEFL) is experimentally demonstrated. The filter selectivity can be easily adjusted by tuning and apodizing the optical taps generated from the multiwavelength BEFL. Reconfiguration of different frequency responses are demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Asymmetric branching of dissociated photofragments of HD{sup +} in an intense femtosecond laser field

We have numerically explored the asymmetry in the branching ratio of the photofragments in the photodissociation of HD{sup +} (neutral D and neutral H), leading to the possibility of localization of the electron on a chosen nucleus by careful tuning of the laser parameters. For two different frequencies we show that, starting from an initial stationary wave function, proper tuning of the pulse duration (2{sigma}) and peak intensities (I{sup 0}) of the laser pulses can lead to very different branching ratios of the two reaction channels. The results are interpreted in terms of the propagation of the nonstationary wave packet through regions having dominant radiative or nonradiative interactions at different times. We also investigate what effect the choice of initial vibrational state has on the overall asymmetry in the branching ratio of the dissociation products.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗