Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Comparison of measurements by different instruments of the far-infrared reflectance of rough, optically black coatings

Two comparisons of available specular infrared measurements using identical or very similar coatings reveal that specular BRDF (bidirectional reflectance distribution function) measurements of rough coatings are comparable but that simple measured reflectances are not. This is seen as indicating that the diffuse component of the measured specular reflectance is significantly larger than that of the specular component. It is noted that the diffuse component of the measurement is a convolution of the intrinsic directional reflectivity of the surface with the instrument function and that because the value of that function increases at the wavelengths under consideration, the diffuse component is larger than would otherwise be expected. The BRDF normalization is found to cause a primitive deconvolution of the instrument function and to produce a quantity that is approximately equal to the mean intrinsic directional reflectivity very near the specular direction. The analysis and comparison of data reveal that nonspecular BRDF measurements at angles well outside the instrument function can be calibrated as well by an image of the source upon the detector as by reference to a known surface.

Smith, S. M.↗

Wave theory of turbulence in compressible media (acoustic theory of turbulence)

The generation and the transmission of sound in turbulent flows are treated as one of the several aspects of wave propagation in turbulence. Fluid fluctuations are decomposed into orthogonal Fourier components, with five interacting modes of wave propagation: two vorticity modes, one entropy mode, and two acoustic modes. Wave interactions, governed by the inhomogeneous and nonlinear terms of the perturbed Navier-Stokes equations, are modeled by random functions which give the rates of change of wave amplitudes equal to the averaged interaction terms. The statistical framework adopted is a quantum-like formulation in terms of complex distribution functions. The spatial probability distributions are given by the squares of the absolute values of the complex characteristic functions. This formulation results in nonlinear diffusion-type transport equations for the probability densities of the five modes of wave propagation.

Kentzer, C. P.↗

A cubic spline approximation for problems in fluid mechanics

A cubic spline approximation is presented which is suited for many fluid-mechanics problems. This procedure provides a high degree of accuracy, even with a nonuniform mesh, and leads to an accurate treatment of derivative boundary conditions. The truncation errors and stability limitations of several implicit and explicit integration schemes are presented. For two-dimensional flows, a spline-alternating-direction-implicit method is evaluated. The spline procedure is assessed, and results are presented for the one-dimensional nonlinear Burgers' equation, as well as the two-dimensional diffusion equation and the vorticity-stream function system describing the viscous flow in a driven cavity. Comparisons are made with analytic solutions for the first two problems and with finite-difference calculations for the cavity flow.

Rubin, S. G.↗

Viscous flow solutions with a cubic spline approximation

A cubic spline approximation is used for the solution of several problems in fluid mechanics. This procedure provides a high degree of accuracy even with a nonuniform mesh, and leads to a more accurate treatment of derivative boundary conditions. The truncation errors and stability limitations of several typical integration schemes are presented. For two-dimensional flows a spline-alternating-direction-implicit (SADI) method is evaluated. The spline procedure is assessed and results are presented for the one-dimensional nonlinear Burgers' equation, as well as the two-dimensional diffusion equation and the vorticity-stream function system describing the viscous flow in a driven cavity. Comparisons are made with analytic solutions for the first two problems and with finite-difference calculations for the cavity flow.

Rubin, S. G.↗

Wave theory of turbulence in compressible media

An acoustical theory of turbulence was developed to aid in the study of the generation of sound in turbulent flows. The statistical framework adopted is a quantum-like wave dynamical formulation in terms of complex distribution functions. This formulation results in nonlinear diffusion-type transport equations for the probability densities of the five modes of wave propagation: two vorticity modes, one entropy mode, and two acoustic modes. This system of nonlinear equations is closed and complete. The technique of analysis was chosen such that direct applications to practical problems can be obtained with relative ease.

Kentzer, C. P.↗

Kinetics of boron deposition by the hydrogen reduction of boron trichloride

The chemical vapor deposition of boron filament is generally considered to be limited by the diffusion of the reactive species to the hot substrate. From concentration gradient considerations and from experimental measurements it is concluded that the product species (HCl) is more likely to be involved in limiting the deposition rate. Comparison of theoretically calculated and experimentally measured deposition rates show that the rate is generally partially limited by diffusion and partially by the surface reaction rate (desorption) of HCl. The relative amounts of surface reaction or diffusion rate impedance were determined as a function of temperature and gas velocity. The temperature coefficient for the desorption of HCl was found to be 52 Kcal/mole.

Mehalso, R. M.↗

A simple theory of back surface field /BSF/ solar cells

A theory of an n-p-p/+/ junction is developed, entirely based on Shockley's depletion layer approximation. Under the further assumption of uniform doping the electrical characteristics of solar cells as a function of all relevant parameters (cell thickness, diffusion lengths, etc.) can quickly be ascertained with a minimum of computer time. Two effects contribute to the superior performance of a BSF cell (n-p-p/+/ junction) as compared to an ordinary solar cell (n-p junction). The sharing of the applied voltage among the two junctions (the n-p and the p-p/+/ junction) decreases the dark current and the reflection of minority carriers by the builtin electron field of the p-p/+/ junction increases the short-circuit current. The theory predicts an increase in the open-circuit voltage (Voc) with a decrease in cell thickness. Although the short-circuit current decreases at the same time, the efficiency of the cell is virtually unaltered in going from a thickness of 200 microns to a thickness of 50 microns. The importance of this fact for space missions where large power-to-weight ratios are required is obvious.

Von Roos, O.↗

Cosmological considerations on the diffuse gamma-ray isotropic background

Bignami et al (1979) have recently studied the problem of the origin of the diffuse gamma-ray isotropic radiation. They have concluded that within standard cosmology with Lambda = 0 and p = 0, BL Lacertae objects and Seyfert galaxies can account for most of the diffuse radiation if they have not evolved in time. For QSOs, an evolutionary factor is allowed by the data. From the study of radio data, however, it is known that strong evolutionary effects are expected. The discrepancy cannot be explained by changing the geometry of the universe. Contrary to the case of standard cosmology, it is found that in order to fit the diffuse gamma-ray background, the evolutionary function required is almost identical to the one previously determined from the study of the log N-log S relation.

Canuto, V. M.↗

Three-Dimensional Tracer Model Study of Atmospheric CO2 - Response to Seasonal Exchanges with the Terrestrial Biosphere

A three-dimensional tracer transport model is used to investigate the annual cycle of atmospheric CO2 concentration produced by seasonal exchanges with the terrestrial biosphere. The tracer model uses winds generated by a global general circulation model to advect and convect CO2; no explicit diffusion coefficients are employed. A biospheric exchange function constructed from a map of net primary productivity, and Azevedo's (1982) seasonality of CO2 uptake and release closely simulates the annual cycles at coastal stations. The results show that zonal homogeneity in surface CO2 concentrations can never be achieved at mid-latitudes where the time scale for zonal mixing is longer than the time scale for biospheric exchange. Analysis of the zonal mean balance in the lower troposphere reveals that atmospheric transport processes may alter the CO2 response to local biospheric exchanges by 50% or more. Hence year-to-year variation of the annual CO2 cycle may result from the natural variability of the atmospheric circulation as well as from changes in the sources and sinks.

Fung, I.↗

A survey by HEAO 1 of clusters of galaxies. III - The complete Abell catalog

A catalog of 128 X-ray emitting clusters, including the Virgo Cluster, is presented. Ninety-one of these are new identifications. The catalog was obtained by searching the HEAO 1 survey observations for coincidences of X-ray sources with Abell clusters. The distribution of these sources in the sky has been examined in search of associations with other Abell clusters, with a null result. The X-ray luminosity has been correlated with cluster richness, but no association with Bautz-Morgan class has been found. The cluster luminosity function has been evaluated, and using this function the contribution of clusters to the diffuse X-ray background radiation has been estimated. It amounts to less than 15% at 2 keV and 3% at 6 keV.

Johnson, M. W.↗

A model of the radiative properties of the El Chichon stratospheric aerosol layer

An accurate multiple-scattering model has been employed to examine the effect of an aerosol layer at 25 mb, corresponding to the El Chichon observations, on the reflection, transmission and absorption of radiation by the stratosphere as a function of latitude, optical thickness and aerosol size distribution. Results are presented and parameterized for each of two wavelength intervals in the shortwave region and 17 wavelength intervals in the longwave region for three models of the aerosol size distribution. They include one model representing the unperturbed stratospheric aerosol plus two models based on measurements of the El Chichon aerosol size distribution. In addition to models of the radiative properties of the aerosol layer, a simple model of the latitudinal distribution of aerosol optical thickness as a function of time is developed, based on diffusive transport in latitude and exponential decay in time. These parameterizations for solar and infrared radiation, together with the dispersion model, permit climate models to account for the evolution of an aerosol size distribution from post-volcanic conditions to background conditions.

King, M. D.↗

Calculation of charge-state ratios for satellite Tor I

The diffusion of ions in a satellite plasma torus is presently modeled in terms of a one-dimensional random walk in which the particle source is at 0, the particle sink is at an N value that is an integer greater than 2, and the scale size of the diffusion cell is unity. The probability distribution function of the number of steps to exit for an ion is obtained and used in a model which incorporates ionization by electron impact to derive steady state expressions for the ratio of doubly to singly ionized ions, as well as the total number of ions in the torus. The results thus obtained are applied to the torus of the Jovian satellite Io, in order to predict mean residence times for sulfur and oxygen ions.

Summers, D.↗

Advanced electric propulsion and space plasma contactor research

A theory of the plasma contacting process is described and experimental results obtained using three different hollow cathode-based plasma contactors are presented. The existence of a sheath across which the bulk of the voltage drop associated with the contacting process occurs is demonstrated. Test results are shown to agree with a model of a spherical, space-charge-limited double sheath. The concept of ignited mode contactor operation is discussed, which is shown to enhance contactor efficiency when it is collecting electrons. An investigation of the potentials in the plasma plumes downstream of contactors operating at typical conditions is presented. Results of tests performed on hollow cathodes operating at high interelectrode pressures (up to about 1000 Torr) on ammonia are presented and criteria that are necessary to ensure that the cathode will operate properly in this regime are presented. These results suggest that high pressure hollow cathode operation is difficult to achieve and that special care must be taken to assure that the electron emission region remains diffuse and attached to the low work function insert. Experiments conducted to verify results obtained previously using a ring cusp ion source equipped with a moveable anode are described and test results are reported. A theoretical study of hollow cathode operation at high electron emission currents is presented. Preliminary experiments using the constrained sheath optics concept to achieve ion extraction under conditions of high beam current density, low net accelerating voltage and well columniated beamlet formation are discussed.

Wilbur, Paul J.↗

Diffusion, phase equilibria and partitioning experiments in the Ni-Fe-Ru system

Results are presented on thin-film diffusion experiments designed to investigate phase equilibria in systems containing high concentrations of Pt-group elements, such as Ni-Fe-Ru-rich systems containing Pt, at temperatures of 1273, 1073, and 873 K. The rate of Ru diffusion in Ni was determined as a function of temperature, and, in addition, the degree of Pt and Ir partitioning between phases in a Ni-Fe-Ru-rich system and of V between phases in a Ni-Fe-O-rich system at 873 were determined. It was found that Pt preferentially partitions into the (gamma)Ni-Fe phase, whereas Ir prefers the (epsilon)Ru-Fe phase. V partitions strongly into Fe oxides relative to (gamma)Ni-Fe. These results have direct application to the origin and thermal history of the alloys rich in Pt-group elements in meteorites.

Blum, Joel D.↗

Chemically reacting supersonic flow calculation using an assumed PDF model

This work is motivated by the need to develop accurate models for chemically reacting compressible turbulent flow fields that are present in a typical supersonic combustion ramjet (SCRAMJET) engine. In this paper the development of a new assumed probability density function (PDF) reaction model for supersonic turbulent diffusion flames and its implementation into an efficient Navier-Stokes solver are discussed. The application of this model to a supersonic hydrogen-air flame will be considered.

Farshchi, M.↗