Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffuse interface method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Chemical and Electronic Structure at the Interface between a Sputter-Deposited Zn(O,S) Buffer and a Cu(In,Ga)(S,Se) 2 Solar Cell Absorber

The chemical and electronic structure of the interface between a sputter-deposited Zn(O,S) buffer layer and an industrial Cu(In,Ga)(S,Se) 2 (CIGSSe) absorber for thin-film solar cells is investigated with X-ray and UV photoelectron spectroscopy, inverse photoemission spectroscopy, and X-ray emission spectroscopy. We find a CIGSSe absorber surface band gap of 1.61 (±0.14) eV, which is significantly increased as compared to the minimal value derived with bulk-sensitive methods (≈1.1 eV). We find no indication for diffusion of absorber elements into the buffer layer. Surface- and bulk-sensitive measurements of the buffer layer suggest the presence of S-Zn and S-O bonds in the Zn(O,S) layer. We find that the naturally existing downward band bending toward the CIGSSe absorber surface is increased by the formation of the interface, likely enhancing carrier separation under illumination. We also derive a flat conduction band alignment, in line with the reported high conversion efficiencies of corresponding large-area solar cells.

14 SOLAR ENERGY↗

In Situ Atomic Tracking on the Interfacial Etching and Reconfiguration of Cu-ReSe 2 Contact during Thermal Annealing

The Schottky barrier height can be greatly affected by the metal diffusion, reaction, and covalent bonding formation at the contact. Exploring novel methods and revealing the fundamental mechanisms for contact engineering are of vital importance for microelectronic devices. Here, in this study, the annealing induced interfacial reactions at Cu-ReSe 2 contact are dynamically revealed from the atomic scale. Accompanied by the diffusion of Se to Cu, ReSe 2 is gradually decomposed to a thin Re interlayer through a “chain-by-chain” manner. Theoretical calculations show that the Cu atoms can facilitate the chemical bond breaking of ReSe 2 , significantly lowering the Se diffusion energy barrier toward Cu. The formed Re/ReSe 2 heterostructure presents a metal-like band structure, which underscores the critical role of Cu in altering the interfacial chemistry and promoting carrier transport across the interface. Our results can provide vital insights into the contact properties of ReSe 2 and provide a possible method for fabricating high-performance ReSe 2 -based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ag/AgBr/g-C{sub 3}N{sub 4}: A highly efficient and stable composite photocatalyst for degradation of organic contaminants under visible light

Graphical abstract: Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts displayed excellent photocatalytic activities on the degradation of methyl orange (MO) under visible light. The improved photocatalytic performance and stability of Ag/AgBr/g-C{sub 3}N{sub 4} originated from the synergetic effects of AgBr/g-C{sub 3}N{sub 4} interface and metallic Ag nanoparticles. ·O{sub 2}−, one of the reactive species, was responsible for the photodegradation of MO compared to H+ and ·OH. - Highlights: • Novel Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalyst was reported. • Ag/AgBr/g-C{sub 3}N{sub 4} had novel energy band combination between AgBr and g-C{sub 3}N{sub 4}. • Synergetic effects of AgBr/g-C{sub 3}N{sub 4} interface and metallic Ag nanoparticles. • Electron trapping role of metallic Ag dominated the stability of Ag/AgBr/g-C{sub 3}N{sub 4}. - Abstract: Novel Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts were constructed via deposition–precipitation method and extensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and UV–vis diffuse reflectance spectroscopy (DRS). Under visible light (λ > 420 nm), Ag/AgBr/g-C{sub 3}N{sub 4} composite photocatalysts displayed much higher photocatalytic activities than those of Ag/AgBr and g-C{sub 3}N{sub 4} for degradation of methyl orange (MO). 50% Ag/AgBr/g-C{sub 3}N{sub 4} presented the best photocatalytic performance, which was mainly attributed to the synergistic effects of AgBr/g-C{sub 3}N{sub 4} interface and the in situ metallic Ag nanoparticles for efficiently separating electron–hole pairs. Furthermore, Ag/AgBr/g-C{sub 3}N{sub 4} remained good photocatalytic activity through 5 times of cycle experiments. Additionally, the radical scavengers experiment indicated that ·O{sub 2}{sup −} was the main reactive species for the MO degradation under visible light.

36 MATERIALS SCIENCE↗

Comparative study of microstructure and properties of low-alloy-steel/nickel-based-alloy interfaces in dissimilar metal weld joints prepared by different GTAW methods

Highlights: • Number of type I and type II boundaries: H-DMWJ > C-DMWJ > W-DMWJ. • Width carbon depleted zones and carbon enriched zones: H-DMWJ > C-DMWJ > W-DMWJ. • Type I and type II boundaries are susceptible to SCC and cracked during mechanical bending. • C-DMWJ has the best performance while H-DMWJ has the worst one. - Abstract: Low-alloy-steel/buttering (or welding) metal interfaces in safe-end dissimilar metal weld joints (DMWJs) at nuclear power plants are weak parts. To optimize the quality of the safe-end DMWJs used for the construction of domestic nuclear power plants and to improve the welding productivity, a series of DMWJs in full-size have been manufactured by using different gas tungsten arc welding (GTAW) methods. The microstructure, chemical composition distribution and local properties across the SA508/52(M) interfaces in these DMWJs are studied. The high heat input and long high temperature duration during hot-wire GTAW process promote the carbon diffusion and grain boundary migration and hence the DMWJ by hot-wire GTAW has the largest amount of type I and type II boundaries and the widest carbon depleted zones and carbon enriched zones, which resulting in the worst performance among the DMWJs in simulated primary water. Type I and type II boundaries are high angle random grain boundaries (RGBs) and Cr-depleted zones are found along type II boundaries resulting in their high susceptibility to SCC. In addition, these boundaries are prone to be cracked during mechanical bending process.

36 MATERIALS SCIENCE↗

Advanced surface plasma nitriding for development of corrosion resistant and accident tolerant fuel cladding: Final Report

Although various surface coating techniques have been proposed to increase oxidation and corrosion resistance of fuel cladding materials, the de-bonding of the coating layer with the original cladding matrix under exposure to coolants makes such approaches unsuitable for reactor applications. Furthermore, the feasibility of techniques for large scale processing on cladding tubes remains another technological bottleneck. This project aims to develop a hollow cathode plasma nitriding technique to solve the above issues. Starting with alloys of DOE interest, the team will apply an advanced surface plasma nitriding technique to convert alloy surface layers into nitride layers for better structural integrity and compatibility with both coolants and nuclear fuels. The technique can form uniform nitride layers on both inner and outer surfaces of cylindrical hollow tubes. Both treated and untreated samples will be irradiated by using Fe self ions or dual beams of Fe ions and He ions. Various microstructural characterizations and mechanical property measurements will be performed. For outside surfaces, samples will be tested in high temperature water and liquid molten salt to evaluate their corrosion resistance and compatibility with coolants for LWR and fast reactor applications. For inside surfaces, solid-to-solid diffusion couple experiments will be used to study interface reactions of nitrided samples with uranium, to test whether a nitrided layer can slow down fuel-cladding interactions. The project will impact both the development of advanced methods for manufacturing and the development of advanced reactor in-core structural materials. The proposed technique can form nitride layers on alloys of irregular shapes without an edging effect - an issue encountered in traditional plasma nitriding processes, and is suitable for surface processing of other in-core components.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Diffusion welding of MA 6000 and a conventional nickel-base superalloy

A feasibility study of diffusion welding the oxide dispersion strengthened (ODS) alloy MA 6000 to itself and to conventional Ni-base superalloy Udimet 700 was conducted. Butt joints between MA 6000 pieces and lap joints between Udimet 700 and the ODS alloy were produced by hot pressing for 1.25 hr at temperatures ranging from 1000 to 1200 C (1832-2192 F) in vacuum. Following pressing, all weldments were heat treated and machined into mechanical property test specimens. While three different combinations of recrystallized and unrecrystallized MA 6000 butt joints were produced, the unrecrystallized to unrecrystallized joint was most successful as determined by mechanical properties and microstructural examination. Failure to weld the recrystallized material probably related to a lack of adequate deformation at the weld interface. While recrystallized MA 6000 could be diffusion welded to Udimet 700 in places, complete welding over the entire lap joint was not achieved, again due to the lack of sufficient deformation at the faying surfaces. Several methods are proposed to promote the intimate contact necessary for diffusion welding MA 6000 to itself and to superalloys.

Moore, T. J.↗

CO2 mass transfer enhancement of aqueous amine solvents by particle additives

The present invention relates to methods for improving carbon capture by providing particles within an amine solvent. The particles provide for increased turbulence at the interface between the counter-flowing gas and solvent, which allows for increased amine and carbamate salt diffusion between the liquid film and bulk.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Control rod treatment for FEM based radiation transport methods

This paper presents a novel control rod treatment for finite element method (FEM) based reactor physics simulations. The new method falls into the class of homogenization methods which treat material interfaces within mesh elements by defining a representative, homogenized nuclear cross section set. In contrast to existing homogenization based cusping treatments that attempt to approximate flux-volume weighting of the cross sections, we propose to exactly integrate terms appearing in the variational form of the transport or diffusion equation over mixed material elements. This goal is achieved by defining smoothly varying cross sections in elements that straddle material boundaries. It is shown that the smoothly varying cross sections can be obtained by projecting the piecewise set of cross sections onto the set of Legendre polynomials up to a finite order. Implementation of smoothly varying cross sections is supported within the Rattlesnake radiation multiphysics code that is currently under development at the Idaho National Laboratory. Homogenization methods traditionally suffer from cusping effects that originate from overestimation of absorption cross sections in strongly neutron-absorbing materials as found in control rods. We demonstrate that the presented method is (1) highly effective in removing cusping effects and (2) provides accurate results based on the C5G7-TD benchmark, a time-dependent version of the C5G7 benchmark.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Convection of tin in a Bridgman system. I - Flow characterization by effective diffusivity measurements

An electrochemical titration method was used to investigate the dynamic states in a cylindrical layer of convecting tin. The liquid tin was contained in a cell, with curved boundaries made of quartz and flat boundaries made of a solid state electrolyte - yttria-stabilized zirconia (YSZ). The electrolyte acted as a window through which a trace amount of oxygen could be pumped in or out by the application of a constant voltage. The concentration at the YSZ interface was monitored by operating the electrochemical cell in the galvanic mode. Experimentally determined effective diffusivities of oxygen were compared with the molecular diffusivity. Dynamic states in the convective flow were thus inferred. Temperature measurements were simultaneously made in order to identify the onset of oscillations from a steady convective regime. The experiments were conducted for two different aspect ratios for various imposed temperature gradients and two different orientations with respect to gravity. Transcritical states were identified and comparison to two-dimensional numerical models were made.

Sears, B.↗

Dissimilar Metal Weld Joints of P91/Ni Alloy: Microstructural Characterization of HAZ of P91 and Stress Analysis at the Weld Interfaces

Microstructure evolution and hardness were evaluated at the interface of two friction-welded transition joints between P91 and AISI 304 fabricated applying Inconel interlayers, viz. single-interlayer weld (P91/IN600/AISI304) and three-interlayer weld (P91/IN625/IN600/IN800H/AISI304). The welds were subjected to post-weld heat treatment at 1023 K for 1 h followed by air cooling and a long-term exposure at 973 K for 100, 250, and 500 h. A soft zone with the absence of lath martensite was noticed in both the welds which was located at the intercritical heat-affected zone of the welds. This zone was found to be extending with time toward the fine grain heat-affected zone by carbide precipitation and coarsening at the grain boundaries. Soft zone formation at the interface of the welds was found to be due to carbon diffusion. The presence of high-nickel-content alloy at the interface was proven to be beneficial in stopping carbon diffusion at the interface. Though soft zones existed in both the welds, better creep rupture life was observed for three-interlayer welds. Finite element analysis of these weld joints was performed for thermal loading followed by tensile loading. The results from this analysis indicated that thermal expansion also plays an important role in the failures of these dissimilar weld joints by creating high stress at the interface due to incompatibility.

36 MATERIALS SCIENCE↗

Elucidating the Nanoparticle–Metal Organic Framework Interface of Pt@ZIF-8 Catalysts

Composites of metal nanoparticles encapsulated in metal–organic frameworks (NP@MOFs) have emerged as heterogeneous catalysts for regioselective reactions. While numerous NP@MOF composite combinations have been synthesized, characterization of the nanoparticle–MOF interface and the encapsulated nanoparticle surface have yet to be determined. In this work, Pt@ZIF-8 synthesized by the controlled encapsulation method was chosen as a representative NP@MOF, and in situ characterization methods coupled with density functional theory (DFT) calculations were used to probe the nanoparticle surface. CO adsorption diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that Pt@ZIF-8 exhibits red-shifted linear- and bridge-bound CO peaks and a linear peak associated with cationic Pt. DFT calculations and 1H NMR suggest that these sites arise from the binding and electronic donation of the MOF linker, 2-methylimidazole, to the Pt surface. DRIFTS under argon reveals that linker fragments may be present on the Pt nanoparticle surface, suggesting a reaction between the nanoparticle and the MOF linker during controlled encapsulation synthesis. Finally, CO oxidation reveals via DRIFTS that the red-shifted linear CO and bridging CO sites are active sites, while the cationic Pt is not. Overall, these results show that Pt@ZIF-8 contains unique Pt surface sites and indicate that the nanoparticle–MOF interface contains a heterogeneous mixture of framework 2-methylimidazole, free-standing 2-methylimidazole, and linker fragments. These findings expose the complex nature of the nanoparticle surface in NP@MOF composites and demonstrate the importance of characterizing their surface to understand their catalytic behavior.

Whitford, Cassandra L. (ORCID:0000000282237516)↗

Electrical properties and interfacial issues of high-k/Si MIS capacitors characterized by the thickness of Al{sub 2}O{sub 3} interlayer

A thin Al{sub 2}O{sub 3} interlayer deposited between La{sub 2}O{sub 3} layer and Si substrate was used to scavenge the interfacial layer (IL) by blocking the out-diffusion of substrate Si. Some advantages and disadvantages of this method were discussed in detail. Evident IL reduction corroborated by the transmission electron microscopy results suggested the feasibility of this method in IL scavenging. Significant improvements in oxygen vacancy and leakage current characteristics were achieved as the thickness of Al{sub 2}O{sub 3} interlayer increase. Meanwhile, some disadvantages such as the degradations in interface trap and oxide trapped charge characteristics were also observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A direct-method for imaging elemental distribution profiles with long-period x-ray standing waves.

A model-independent Fourier-inversion method for imaging elemental profiles from multilayer and total-external reflection x-ray standing wave (XSW) data is developed for the purpose of understanding the assembly of atoms, ions, and molecules at well-defined interfaces in complex environments. The direct-method formalism is derived for the case of a long-period XSW generated by low-angle specular reflection in an attenuating overlayer medium. It is validated through comparison with simulated and experimental data to directly obtain an elemental distribution contained within the overlayer. We demonstrate this formalism by extracting the one-dimensional profile of Ti normal to the surface for a TiO{sub 2}/Si/Mo trilayer deposited on a Si substrate using the Ti K{alpha} fluorescence yield measured in air and under an aqueous electrolyte. The model-independent results demonstrate reduced coherent fractions for the in situ results associated with an incoherency of the x-ray beam (which are attributed to fluorescence excitation by diffusely or incoherently scattered x-rays). The uniqueness and limitations of the approach are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile fabrication of micro-floriated AgBr/Bi{sub 2}O{sub 3} as highly efficient visible-light photocatalyst

Highlights: • We successfully fabricate micro-floriated AgBr/Bi{sub 2}O{sub 3} composites by one simple hydrothermal react with precusor BiOBr. This micro-floriated Bi{sub 2}O{sub 3} heterojunction composite is rarely reported by others. • Heterojunction AgBr/Bi{sub 2}O{sub 3} composite exhibits highly efficient photocatalytic activity to decompose pollutant. • The enhanced photocatalytic activity was attributed to the improved visible light harvesting ability and higher separation efficiency of photogenerated electron–hole pairs by the introduction of AgBr. • This composite is beneficial to industrial applications to eliminate the organic pollutants from waste water. - Abstract: Semiconductor with photocatalytic property is the potential solution to solve the problem about water pollution. Novel floriated AgBr/Bi{sub 2}O{sub 3} fabricated through a facile simple two-step hydrothermal method is an efficient photocatalyst. The eminent performance for degradation of methyl orange (MO) was evaluated under visible light irradiation. Many characterization methods, including XPS, XRD, FT-IR, SEM, TEM and UV–vis diffuse reflection spectroscopy, were used to investigate the structure, elemental composition, morphology and catalytic activity. Broad contact between AgBr and Bi{sub 2}O{sub 3} interface enabled hybrid materials possess superior efficiency for the decomposition of MO under visible light irradiation. The optimum photocatalytic activity of samples was approximately 11.7 times higher than pure Bi{sub 2}O{sub 3}. In addition, the photo-generated reactive species were identified based on free radicals trapping experiments, which revealed that superoxide radical is the key factor to the photocatalytic process.

36 MATERIALS SCIENCE↗

Process modelling for materials preparation experiments

The main goals of the research under this grant consist of the development of mathematical tools and measurement techniques for transport properties necessary for high fidelity modelling of crystal growth from the melt and solution. Of the tasks described in detail in the original proposal, two remain to be worked on: development of a spectral code for moving boundary problems, and development of an expedient diffusivity measurement technique for concentrated and supersaturated solutions. We have focused on developing a code to solve for interface shape, heat and species transport during directional solidification. The work involved the computation of heat, mass and momentum transfer during Bridgman-Stockbarger solidification of compound semiconductors. Domain decomposition techniques and preconditioning methods were used in conjunction with Chebyshev spectral methods to accelerate convergence while retaining the high-order spectral accuracy. During the report period we have further improved our experimental setup. These improvements include: temperature control of the measurement cell to 0.1 C between 10 and 60 C; enclosure of the optical measurement path outside the ZYGO interferometer in a metal housing that is temperature controlled to the same temperature setting as the measurement cell; simultaneous dispensing and partial removal of the lower concentration (lighter) solution above the higher concentration (heavier) solution through independently motor-driven syringes; three-fold increase in data resolution by orientation of the interferometer with respect to diffusion direction; and increase of the optical path length in the solution cell to 12 mm.

Rosenberger, Franz↗

Numerical investigation of electromagnetic pulse welded interfaces between dissimilar metals

The quality of an electromagnetic pulse weld is strongly affected by a variety of interacting physical phenomena including large plastic deformation, materials mixing, localised heating and rapid cooling, and possible localised melting and interfacial cracks and void. In the present study, a thermomechanically coupled dynamic model has been developed to quantitatively resolve the high speed impact joining interface characteristics as well as the process induced interface temperature evolution, defect formation and possible microstructural composition variations. Reasonably good agreement has been obtained between the predicted results and the experimental measurements in terms of interfacial morphology characteristics. The modelling framework is expected to provide further understanding of the hierarchical interfacial features of the non-equilibrium material joining process and the weld formation mechanisms.

Xu, W.↗

A space-time adaptive finite element method with exponential time integrator for the phase field model of pitting corrosion

In this paper we propose a space-time adaptive finite element method for the phase field model of pitting corrosion, which is a parabolic partial differential equation system consisting of a phase variable and a concentration variable. A major challenge in solving this phase field model is that the problem is very stiff, which makes the time step size extremely small for standard temporal discretizations. Another difficulty is that a high spatial resolution is required to capture the steep gradients within the diffused interface, which results in very large number of degrees of freedom for uniform meshes. To overcome the stiffness of this model, we combine the Rosenbrock–Euler exponential integrator with Crank–Nicolson scheme for the temporal discretization. Moreover, by exploiting the fact that the speed of the corroding interface decreases with time, we derive an adaptive time stepping formula. For the spatial approximation, we propose a simple and efficient strategy to generate adaptive meshes that reduces the computational cost significantly. Thus, the proposed method utilizes local adaptivity and mesh refinement for efficient simulation of the corrosive dissolution over long times in heterogeneous media with complex microstructures. We also present an extensive set of numerical experiments in both two and three dimensional spaces to demonstrate efficiency and robustness of the proposed method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prediction of Thermal Transport Properties of Materials with Microstructural Complexity

This project aims at overcoming the major obstacle standing in the way of progress in dynamic multiscale simulation, which is the lack of a concurrent atomistic-continuum method that allows phonons, heat and defects to pass through the atomistic-continuum interface. The research has led to the development of a concurrent atomistic-continuum (CAC) methodology for multiscale simulations of materials microstructural, mechanical and thermal transport behavior. Its efficacy has been tested and demonstrated through simulations of dislocation dynamics and phonon transport coupled with microstructural evolution in a variety of materials and through providing visual evidences of the nature of phonon transport, such as showing the propagation of heat pulses in single and polycrystalline solids is partially ballistic and partially diffusive. In addition to providing understanding on phonon scattering with phase interface and with grain boundaries, the research has contributed a multiscale simulation tool for understanding of the behavior of complex materials and has demonstrated the capability of the tool in simulating the dynamic, in situ experimental studies of nonequilibrium transient transport processes in material samples that are at length scales typically inaccessible by atomistically resolved methods.

36 MATERIALS SCIENCE↗