Search NASA⌕ Search

SEARCH · Search NASA

Results for “directional heating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Solar rejection for an orbiting telescope

The present work discusses some of the constraints that the optical designer must deal with in optimizing spaceborne sensors that must look at or near the sun. Analytical techniques are described for predicting the effects of stray radiation from sources such as mirror scatter, baffle scatter, diffraction, and ghost images. In addition, the paper describes a sensor design that has been flown on the Apollo Telescope Mount (Skylab) to aid astronauts in locating solar flares. In addition to keeping stray radiation to a minimum, the design had to be nondegradable by the direct solar heat load.

Rehnberg, J. D.↗
NASA NTRS1977

Conversion of laser energy to gas kinetic energy

Techniques for the gas-phase absorption of laser energy with ultimate conversion to heat or directed kinetic energy are reviewed. It is shown that the efficiency of resonance absorption by the vibration/rotation bands of the working gas can be enhanced by operating at sufficiently high pressures so that the linewidths of the absorbing transition exceed the line spacing. Within this limit, the gas can absorb continuously over the full spectral region of the band, and bleaching can be minimized since the manifold of molecular vibrational levels can simultaneously absorb the laser radiation.

Caledonia, G. E.↗
NASA NTRS1977

Flight IV technical report for experiment 74-37 contained polycrystalline solidification in low-G

Experiments were performed to study the effect of a low-gravity environment on the columnar-to-equiaxed transition (CET) during polycrystalline solidification. Solutions of H2O-30 wt% NH4Cl and H2O-37 wt% NH4Cl were solidified in semicylindrical molds with radial heat extraction. Both solutions were quenched from the same soak temperature (90 C); the respective superheat temperatures were, therefore, approximately 57 and 23 C. The lower superheat resulted in a completely columnar structure, and the higher superheat resulted in a 1/3 columnar - 2/3 equiaxed microstructure; these results were independent of the relationship between heat flow direction and gravity. Grain multiplication mechanisms observed were showering, thermal inversion driven convection cells, and compositionally induced density inversion driven convection cells.

Papazian, J. M.↗
NASA NTRS1978

Calculation of spin-lattice relaxation during pulsed spin locking in solids

The spin-lattice relaxation time has been calculated for dipolar solids in the case where the spins are locked by an RF pulse sequence with pulses of arbitrary angle and finite width. Expressions are given for the homonuclear case in general and for the heteronuclear case in the delta-function limit. The results for the homonuclear case are experimentally confirmed using solid C6F12. The analysis shows that for small pulse angles, at which the direct spin heating effect is known to be small, the relaxation behavior will be identical to the CW irradiation case.

Rhim, W.-K.↗
NASA NTRS1978

New technique for single-scan T1 measurements using solid echoes

A simple technique for single-scan T1 measurements in solids is proposed and analyzed for single exponential spin-lattice relaxation. In this technique, the direct spin heating caused by the sampling process is significantly reduced in comparison with conventional techniques by utilizing the 'solid echo' to refocus the magnetization. The applicability of this technique to both the solid and liquid phases is demonstrated.

Burum, D. P.↗
NASA NTRS1981

Parabolic dish systems at work - Applying the concepts

An overview is given of parabolic dish solar concentrator application experiments being conducted by the U.S. Department of Energy. The 'engineering experiments' comprise the testing of (1) a small-community powerplant system, in conjunction with a grid-connected utility; (2) stand-alone applications at remote sites such as military installations, radar stations and villages; and (3) dish modules that can deliver heat for direct use in industrial processes. Applicability projections are based on a dish and receiver that use a Brayton engine with an engine/generator efficiency of 25% and a production level of up to 25,000 units per year. Analyses indicate that parabolic-dish power systems can potentially replace small, oil-fired power plants in all regions of the U.S. between 1985 and 1991.

Marriott, A. T.↗
NASA NTRS1983

Drop motion in a rotating immiscible liquid body

The interaction of liquids is an important part of many processes and is often used for such purposes as causing a separation of solution components by mass transfer between phases, allowing a chemical reaction between liquids or their components, providing direct contact heating or cooling, or creating emulsions. Containerless space processing may well involve the interaction of liquids in the form of drops. For example it may be desirable to form an alloy in space by merger of two or more drops. Encapsulation of a volatile liquid by a second less volatile and immiscible liquid might be a means for avoiding volatilization. Rotation of such systems would enhance mixing where desirable and/or provide means for drop management. In this study, single drop behavior in rotating liquid bodies is studied experimentally.

Annamalai, P.↗
NASA NTRS1985

Thermoelectric Generator

Small modular alkali metal thermoelectric generator with no moving parts directly converts heat to electrical energy with efficiency of 20 to 40 percent. Unit uses closed regenerative electrochemical concentration cell based on sodium-ion conductor beta alumina.

Cole, T.↗
NASA NTRS1986

Strong electron bidirectional anisotropies in the distant tail - ISEE 3 observations of polar rain

A detailed observational treatment of bidirectional electrons (about 50 to 500 eV) in the distant magnetotail (r not below 100 earth radii) is presented. It is found that electrons in this energy range commonly exhibit strong, field-aligned anisotropies in the tail lobes. Because of large tail motions, the ISEE 3 data provide extensive sampling of both the north and south lobes in rapid succession. These data directly demonstrate the strong asymmetries that exist between the north and south lobes at any one time. The bidirectional fluxes are found to occur predominantly in the lobe directly connected to the sunward interplanetary magnetic field in the open magnetosphere model (north lobe for away sectors and south lobe for toward sectors). Electron anisotropy and magnetic field data are presented which show the transition from unidirectional (sheath) electron populations to bidirectional (lobe) populations. The open nature of the distant magnetopause is demonstrated and it is shown that the source of the higher-energy, bidirectional lobe electrons is the tailward directed electron heat flux population in the distant magnetosheath. Taken together, the present evidence suggests that the bidirectional electrons that were observed in the distant tail are closely related to the polar rain electrons observed previously at lower altitudes. Furthermore, these data provide strong evidence that the distant tail is composed largely of open magnetic field lines in contradistinction to some recently advanced models.

Baker, D. N.↗
NASA NTRS1987

Simulation of the electron acoustic instability for a finite-size electron beam system

Simulations of the electron acoustic instability for a finite-size electron beam system are performed with a particle-in-cell code to investigate the heating phenomena associated with the instability and the width of the heating region. The results show that the beam radiates electrostatic electron acoustic waves whose decay time outside the beam agrees with the spatial decay length derived from the linear dispersion equation. The ambient cold electrons in a diffusion region surrounding the beam are heated to a higher temperature by absorbing the radiated electron acoustic waves, with the heating occurring mainly in the parallel direction. In the heat diffusion region, the temperature of the cold electrons decreases with distance from the beam with a temperature gradient length smaller than the decay length of the wave energy. The results are discussed with respect to the DE 1 plasma and wave observations in the polar cusp region.

Lin, C. S.↗
NASA NTRS1987

The foreshock region upstream from the Comet Halley bow shock

A few hours prior to the crossing of the Comet Halley bow shock, the Giotto spacecraft intermittently encountered an electron foreshock region. The electron foreshock is characterized by magnetic connection to the cometary bow shock and increased field aligned electron heat flux directed away from the bow shock. A similar region was intermittently encountered by the ICE spacecraft prior to its crossing of the Giacobini-Zinner bow wave. During periods of magnetic connection with the Halley bow shock, enhanced magnetic field fluctuations were observed. These enhancements are interpreted as indirect evidence of an ion foreshock in the electron foreshock. No clearly identifiable backstreaming protons are observed during these periods of magnetic connection, however, because it may be difficult to separate a backstreaming population from the cometary pick-up proton population already present in the upstream region.

Fuselier, S. A.↗
NASA NTRS1988

Solar dynamic heat receiver thermal characteristics in low earth orbit

A simplified system model is under development for evaluating the thermal characteristics and thermal performance of a solar dynamic spacecraft energy system's heat receiver. Results based on baseline orbit, power system configuration, and operational conditions, are generated for three basic receiver concepts and three concentrator surface slope errors. Receiver thermal characteristics and thermal behavior in LEO conditions are presented. The configuration in which heat is directly transferred to the working fluid is noted to generate the best system and thermal characteristics. as well as the lowest performance degradation with increasing slope error.

Wu, Y. C.↗
NASA NTRS1988

Aerodynamic pressures and heating rates on surfaces between split elevons at Mach 6.6

An aerothermal study was performed in the Langley 8-Foot High Temperature Tunnel at Mach number 6.6 to define the pressures and heating rates on the surfaces between split elevons similar to those used on the Space Shuttle. Tests were performed with both laminar and turbulent boundary layers on the wing surface upstream of the elevons. The flow in the chordwise gap between the elevons was characterized by flow separation at the gap entrance and flow reattachment at a depth into the gap inversely proportional to the gap width. The gap pressure and heating rate increased significantly with decrease of elevon gap width, and the maximum gap heating rate was proportional to the maximum gap pressure. Correlation of the present results indicate that the gap heating was directly proportional to the elevon windward surface pressure and was not dependent upon whether the boundary layer on the windward elevon surface was laminar or turbulent.

Hunt, L. Roane↗
NASA NTRS1988

Thermoplastic coated carbon fibers for textile preforms

A continuous process for producing prepreg from carbon fiber and thermoplastic matrix is described. After the tow has been spread using a pneumatic device, the process utilizes a fluidized bed to apply thermoplastic powder to the bundle. Finally, direct electrical heating of the coated fiber tow melts the polymer on the individual fibers, creating a uniform and extremely flexible prepreg. The efficiency of the process was evaluated during initial trials in which a thermoplastic polyimide, LaRC-TPI, was applied to T-300, 3K (3000 filament) carbon fiber tow. The physical properties of unidirectional composite specimens fabricated from this prepreg were measured, and the matrix uniformity and void content of the samples was determined. The results of these evaluations are detailed and discussed.

Allen, L. E.↗
NASA NTRS1993

Surface energy fluxes at Central Florida during the convection and precipitation electrification experiment

One of the objectives of CaPE is to better understand the convective process in central and south Florida during the warm season. The energy and moisture exchanges between the surface and the atmosphere are closely related to this process. Some recent studies have shown that the surface energy balance plays an important role in the climatic fields (Shukla and Mintz, 1982; Sud and Smith, 1985; Sato et. al, 1989). Surface energy fluxes and related surface processes such as evapotranspiration and sensible heat transfer directly effect the temperature, humidity, cloud formation and precipitation. For example, mesoscale circulation around a discontinuity in vegetation type were shown to be stronger with wet soil than with dry soil using an evapotranspiration model (Pinty et. al, 1989). In order to better describe the processes in the atmosphere at various scales and improve our ability of modeling and predicting weather related events, it is crucial to understand the mechanism of surface energy transfer in relation to atmospheric events. Surface energy flux measurements are required to fully understand the interactions between the atmosphere and the surface.

Nie, D.↗
NASA NTRS1991

Advanced radiator concepts feasibility demonstration

An innovative pumped loop concept for 600 K space power system radiators is under development utilizing direct contact heat transfer, which facilitates repeated startup/shutdown of the power system without complex and time-consuming coolant thawing during power startup. The melting/freezing process of Li in a NaK flow was studied experimentally to demonstrate the Li/NaK radiator feasibility during startup (thawing) and shutdown (cold-trapping). Results of the vapor grown carbon fiber/composite thermal conductivity measurements are also presented.

Rhee, Hyop S.↗
NASA NTRS1993

A bi-directional two-phase/two-phase heat exchanger

This paper describes the design and test of a heat exchanger that transfers heat from one two-phase thermal loop to another with very small drops in temperature and pressure. The heat exchanger condenses the vapor in one loop while evaporating the liquid in the other without mixing of the condensing and evaporating fluids. The heat exchanger is bidirectional in that it can transfer heat in reverse, condensing on the normally evaporating side and vice versa. It is fully compatible with capillary pumped loops and mechanically pumped loops. Test results verified that performance of the heat exchanger met the design requirements. It demonstrated a heat transfer rate of 6800 watts in the normal mode of operation and 1000 watts in the reverse mode with temperature drops of less than 5 C between two thermal loops.

Ku, Jentung↗
NASA NTRS1994

Polar volatiles on Mercury and the Moon

The possibility that condensed volatiles might be stable in the permanently shadowed polar regions of the Moon and Mercury has been anticipated in a number of theoretical studies. In 1992, VLA-Goldstone and Arecibo observations revealed the presence of bright, depolarized radar features near the poles of Mercury that have been widely interpreted as evidence for the presence of polar ice deposits. Recently acquired high-resolution Arecibo radar images show that the anomalous radar features are concentrated in crater-sized regions whose locations can be made to coincide exactly with the locations of known impact craters in the Mariner-10 images. These new Arecibo images provide an unusual opportunity to learn more about the distribution and history of Mercury's polar ice deposits. We have constructed a thermal model that can predict surface and subsurface temperatures within impact craters on Mercury and the Moon. Included in the calculations are the effects of 1-dimensional subsurface heat conduction, direct sunlight, multiply reflected sunlight within the crater, and re-radiated infrared radiation within the crater. We also use realistic crater topographic profiles for larger flat-floored craters as well as smaller spherical bowl-shaped craters.

Paige, D. A.↗