Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

High Dose Ion Irradiation Testing on Improved HT-9 Alloys

HT9 alloys having various nitrogen contents were deformed up to 50% engineering strain by plane strain compression. Dislocation density and characteristics were determined after neutron diffraction using line profile analysis. These samples having low and high nitrogen contents were irradiated at 300 °C up to 23 peak dpa. In this study, effect of plane strain deformation on the radiation response of low and high N HT9 alloys has been investigated using both transmission electron microscopy and nanoindentation. It has been found that compression results in a considerable increase in both dislocation density and edge type dislocations. Both TEM and nano-indentation studies indicate that plane strain deformation results in improved radiation resistance in high N HT9 alloys. It has been also found that further deformation beyond 10% compression does not improve the radiation resistance further. On the other hand, deformation does not have a clear effect on the radiation resistance in the case of low N HT9 alloys. Together with that, ion irradiations at 300 °C results in ~2 times higher hardening in low N alloys compared to high N alloys.

36 MATERIALS SCIENCE↗

Dislocation drag and its influence on elastic precursor decay

Plastic deformation is mediated by the creation and movement of dislocations, and at high stress the latter is dominated by dislocation drag from phonon wind. Here, by simulating a 1-D shock impact problem we analyze the importance of accurately modeling dislocation drag and dislocation density evolution in the high stress regime. Dislocation drag is modeled according to a first-principles derivation as a function of stress and dislocation character, and its temperature and density dependence are approximated to the extent currently known. Much less is known about dislocation density evolution, leading to far greater uncertainty in these model parameters. In studying anisotropic fcc metals with character dependent dislocations, the present work generalizes similar earlier studies by other authors.

36 MATERIALS SCIENCE↗

Continuum Level Formulation and Implementation of a Multi-scale Model for Vanadium

A multi-scale approach is used to construct a continuum strength model for vanadium. The model is formulated assuming plastic deformation by dislocation motion and strain hardening due to dislocation interactions. Dislocation density is adopted as the state variable in the model. Information from molecular statics, molecular dynamics and dislocation dynamics simulations is combined to create kinetic relations for dislocation motion, strain hardening relations and evolution equations for the dislocation density. Implicit time integration of the constitutive equations is described in the context of implementation in a finite element code. Results are provided illustrating the strain, strain rate, temperature and pressure dependence of the constitutive model.

36 MATERIALS SCIENCE↗

Mechanism of dislocation-governed charge transport in schottky diodes based on gallium nitride

A mechanism of charge transport in Au-TiB{sub x}-n-GaN Schottky diodes with a space charge region considerably exceeding the de Broglie wavelength in GaN is studied. Analysis of temperature dependences of current-voltage (I-V) characteristics of forward-biased Schottky barriers showed that, in the temperature range 80-380 K, the charge transport is performed by tunneling along dislocations intersecting the space charge region. Estimation of dislocation density {rho} by the I-V characteristics, in accordance with a model of tunneling along the dislocation line, gives the value {rho} {approx} 1.7 x 10{sup 7} cm{sup -2}, which is close in magnitude to the dislocation density measured by X-ray diffractometry.

36 MATERIALS SCIENCE↗

Dislocation structures, interfacing, and magnetism in the L1 0 - MnGa on η ⊥ - Mn 3 N 2 bilayer

Ferromagnetic L1 0 -MnGa was grown by molecular beam epitaxy under ultrahigh vacuum conditions to a 73 ± 5 nm thickness atop of 50 ± 5 nm thick molecular beam epitaxy grown antiferromagnetic η ⊥ -Mn 3 N 2 on a MgO(001) substrate. The MnGa grew along the c-axis with an out-of-plane spacing of c = 3.71 ± 0.01 Å and a relaxed in-plane spacing of a = 4.00 ± 0.05 °A measured with X-ray diffraction and reflection high-energy electron diffraction respectively. Williamson-Hall analysis revealed 67 ± 17 nm tall columnar grains with a residual stress of 2.40 ± 0.26 (×10 -3 ). A radial distribution plot of screw dislocations observed in scanning tunneling microscopy images found an in-plane coherence length of 15 ± 5 nm. Reflection high-energy electron diffraction analysis of the in-plane lattice spacing during growth reveals a critical thickness of 1.05 ± 0.65 nm for the MnGa, by which the MnGa film relaxes by incorporating dislocations of both edge and screw type. Vibrating sample magnetometry was employed to obtain the magnetic properties of the bilayer system. It is found that the dislocation density plays a significant role in understanding the measured moment per unit cell, where a large dislocation density lowers the moment per unit cell significantly due to chemical layering disorder. Finally, this finding is important for materials development of large saturation magnetization.

36 MATERIALS SCIENCE↗

Mechanisms of defect formation in ingots of 4H silicon carbide polytype

The methods of optical microscopy and X-ray diffractometry have been used to study the features of defect structure in ingots of the SiC-4H polytype; the ingots have featured different diameters and have been grown by the modified Lely method on seeds with deviations of several degrees from the exact orientation (0001)C in the direction Left-Pointing-Angle-Bracket 112-bar0 Right-Pointing-Angle-Bracket (off-cut (0001) seeds). The slip bands observed in the crystals are extended along the [112-bar0] direction and correspond to the secondary slip system of threading dislocations a/3 Left-Pointing-Angle-Bracket 112-bar0 Right-Pointing-Angle-Bracket (1-bar100) for hexagonal close packing (HCP) crystals. Low-angle dislocation boundaries directed along [11-bar00] accommodate the disorientation of neighboring domains, which results from their mutual rotation around the [0001] axis. Enlargement of ingots leads to some increase in the dislocation density, mainly due to threading edge dislocations. The average density of micropipes is in the range of 5-20 cm{sup -2} and practically remains unchanged as the ingot size is increased.

36 MATERIALS SCIENCE↗

Shocked chromites in fossil L chondrites: A Raman spectroscopy and transmission electron microscopy study

Abstract Chromites from Middle Ordovician fossil L chondrites and from matrix and shock‐melt veins in Catherwood, Tenham, and Coorara L chondrites were studied using Raman spectroscopy and TEM . Raman spectra of chromites from fossil L chondrites showed similarities with chromites from matrix and shock‐melt veins in the studied L chondrite falls and finds. Chromites from shock‐melt veins of L chondrites show polycrystallinity, while the chromite grains in fossil L chondrites are single crystals. In addition, chromites from shock‐melt veins in the studied L chondrites have high densities of planar fractures within the subgrains and many subgrains show intergrowths of chromite and xieite. Matrix chromite of Tenham has similar dislocation densities and planar fractures as a chromite from the fossil meteorite Golvsten 001 and higher dislocation densities than in chromite from the fossil meteorite Sextummen 003. Using this observation and knowing that the matrix of Tenham experienced 20–22 GP a and <1000° C, an upper limit for the P,T conditions of chromite from Golvsten 001 and Sextummen 003 can be estimated to be 20–22 GP a and 1000° C (shock stage S3–S6) and 20 GP a and 1000° C (S3–S5), respectively, and we conclude that the studied fossil meteorite chromites are from matrix.

Rout, Surya S.↗

Quantifying irradiation defects in zirconium alloys: a comparison between transmission electron microscopy and whole-pattern diffraction line-profile analysis - 2016-0089

Irradiation-induced dislocations significantly affect the mechanical properties of zirconium alloys, altering slip and influencing creep and growth. Thus, the quantitative characterization of irradiation defects as a function of fluence, cold work, and/or thermal treatments is important for models that attempt to predict their impact on properties. Whole-pattern diffraction line-profile analysis (DLPA) is a well-established modern tool for microstructure characterization based on first-principle physical models for dislocation density measurements in plastically deformed materials. However, applying these DLPA methods directly to irradiated materials yields higher than expected dislocation density values compared with historical transmission electron microscopy (TEM) measurements and past line-broadening analysis studies calibrated to TEM observations. In an effort to understand these differences, a new microstructural model was developed for DLPA to specifically address dislocation structures consisting of elliptical - and -component loops. To compare the refined DLPA method with TEM measurements, high-resolution neutron diffraction patterns on nonirradiated and irradiated Zr-2.5Nb samples were collected with the Neutron Powder Diffractometer instrument at the Los Alamos Neutron Science Center and were evaluated. High-resolution TEM measurements were performed at the Reactor Materials Testing Laboratory, Queen's University, for comparison with the DLPA results. The capabilities and inherent uncertainties of both the refined DLPA and TEM methods are compared and discussed in detail. We show that the differences between the density values provided by DLPA and TEM are inherent to the methods and can be reconciled with the interpretation of the data. (authors)

36 MATERIALS SCIENCE↗

Study the Effect of Substrate Temperature on Structural and Electrical Properties of Electron Beam Evaporated In{sub 1−x}Sb{sub x} Thin Films

Indium Antimonide (InSb) is a promising materials for mid and long wavelength infrared and high speed devices applications because of its small band gap. The Indium Antimonide (InSb) thin films have been deposited onto well cleaned glass substrate at different substrate temperatures (300 K, 323 K, 373 K) by electron beam evaporation technique in the high vacuum chamber at vacuum pressure ∼10{sup −5} torr using prepared non‐stoichiometric InSb powder using formula In{sub 1−x}Sb{sub x}(0.2<x<0.4) as a source materials. The characteristics of the films such as structural and electrical properties were investigated in terms of substrate temperature. X‐ray diffraction studies of thin films confirmed the polycrystalline and show preferential orientation along the (111) plane. The particle size (D), dislocation density (δ) and strain (ε) were evaluated. The particle size increases with increase of substrate temperature while dislocation density and strain are decreases. Hall measurements indicate that the films were n‐type, having carrier concentration ∼10{sup 14} cm{sup −3} and mobility ∼10{sup 3} cm{sup 2}/Vs for the film thickness of 300 nm. It is also observed that the carrier concentration (N) decreases and the Hall mobility (μ) increases with the increase of substrate temperature. At the request of all authors, Rahul, S. R. Vishwakarma, Aneet Kumar Verma, and Ravi Shankar Nath Tripathi, and due to errors in the article, the paper is retracted from the scientific record.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct observation of creep strengthening nanoprecipitate formation in ausformed ferritic/martensitic steels

It is well known the effectiveness of ausforming on increasing the dislocation density of fresh martensite. Here, this work demonstrates, using atom probe tomography, that this increase in the dislocation density has a strong influence on the nucleation of nanoprecipitates during tempering. Therefore, ausforming might be a powerful processing route for the two-fold improvement of ferritic/martensitic steels where creep resistance is of paramount importance. Firstly, ausforming refines the martensitic microstructure (high strength and toughness), and secondly, it increases the number density of thermally stable nanoprecipitates (creep resistance).

36 MATERIALS SCIENCE↗

In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites

An ultra-low-strain deformation microstructure was revealed for the first time non-destructively in the bulk interior of an annealed laminated Ti-Al composite-in the "fully recrystallized" Al layer-by a synchrotron-based micro-diffraction technique, namely differential aperture X-ray microscopy (DAXM), through real space mapping with a very high angular resolution (0.01 degrees). This ultra-low-strain deformation microstructure was found to result from the thermal stress, induced during cooling after annealing, due to the different coefficients of thermal expansion for the Ti and Al layers. The annealed sample was further tensile deformed to a strain of 1.66% and followed by in situ DAXM and analyzed by various misorientation mapping methods. The results pointed to the important effects of the initial microstructure and the interface constraint, as well as the grain size and crystal orientation, on the plastic deformation. A gradient in dislocation density from the layer interface to the center was found in the Al layer of the annealed sample, and this gradient increased slightly during tensile deformation. The variation of the dislocation density was further discussed based on the activation and interaction of dislocations in grains of different sizes and orientations during plastic deformation. The findings of this study provided valuable insights in understanding the constraint effect of the laminated metal composite and the design of novel composite materials. (c) 2020 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Crystallographic orientation↗

Dislocation electrical conductivity of synthetic diamond films

A relationship between the electric resistance of single-crystal homoepitaxial and polycrystalline diamond films and their internal structure has been investigated. It is established that the electrical conductivity of undoped homoepitaxial and polycrystalline diamond films is directly related to the dislocation density in them. A relation linking the resistivity {rho} ({approx}10{sup 13}-10{sup 15} {omega} cm) with the dislocation density {gamma} ({approx}10{sup 14}-4 x 10{sup 16} m{sup -2}) is obtained. The character of this correlation is similar for both groups of homoepitaxial and polycrystalline diamond films. Thin ({approx}1-8 {mu}m) homoepitaxial and polycrystalline diamond films with small-angle dislocation boundaries between mosaic blocks exhibit dislocation conductivity. The activation energy of dislocation acceptor centers was calculated from the temperature dependence of the conductivity and was found to be {approx}0.3 eV. The conduction of thick diamond films (h > 10 {mu}m) with the resistivity {rho} {approx} 10{sup 8} {omega} cm is determined by the conduction of intercrystallite boundaries, which have a nondiamond hydrogenated structure. The electronic properties of the diamond films are compared with those of natural semiconductor diamonds of types IIb and Ic, in which dislocation acceptor centers have activation energies in the range 0.2-0.35 eV and are responsible for hole conduction.

36 MATERIALS SCIENCE↗

X-ray Diffraction Investigation of Annealing Behavior of Peened Surface Deformation Layer on Precipitation Hardening Stainless Steel

In order to investigate the recrystallization behavior of peened surface deformation layer of precipitation hardening stainless steel, a classic x-ray diffraction line profile analysis, Voigt method, was carried out on peened 17-4PH with different isothermal annealing temperatures. The activation energy of domain boundary migration (Q{sub a}) and the activation energy of microstrain relaxation (Q{sub b}) were calculated by regression analysis in different annealing temperature conditions. The results show that the value of Q{sub a} decreases with annealing temperature increasing, which is due to the influence of precipitation (ε-Cu) size on the movements of grain and subgrain boundaries. The maximum growth rate of ε-Cu particles occurs during 400 to 500 °C interval. Compared with growth behavior of domain size, microstrain relaxation behavior is less sensitive to precipitation particle size. The effects of annealing temperature and time on dislocation density are both significant when annealing temperature is lower than 500 °C. However, the effect of annealing temperature on dislocation density becomes insignificant when annealing temperature is higher than 500 °C. 300 °C annealing temperature only leads to the microstrain relaxation but nearly cannot lead to the domain size growth even if prolonging annealing time. Microstructure enhancement effect still exists in plastic deformation layer when 300 °C annealing temperature lasts for 60 min but nearly disappears when 600 °C annealing temperature lasts for 20 min.

36 MATERIALS SCIENCE↗

Assessment of dislocation reduction on 100 mm diameter bulk GaN grown by the NEAT method

X-ray topography measurements on a 100 mm diameter GaN boule grown by the Near Equilibrium AmmonoThermal method revealed an improvement in dislocation density from >1 × 10 6 cm -2 to between 2 × 10 5 and 5 × 10 5 cm -2, an improvement greater than two to five times from seed to growth. This data builds on previous X-ray diffraction and defect selective etching to quantify the reduction in defect density that is closely associated with increasing growth thickness. This result indicates that there is a pathway to further dislocation reduction by increasing growth thickness for GaN crystals including those of 100 mm or larger diameter. Further reduction of the dislocation density of large-area substrates will lead to GaN power devices with reduced leakage current under reverse bias and better device performance.

36 MATERIALS SCIENCE↗

Single-crystal sapphire microstructure for high-resolution synchrotron X-ray monochromators

We report on the growth and characterization of several sapphire single crystals for the purpose of x-ray optics applications. Structural defects were studied by means of laboratory double-crystal X-ray diffractometry and white beam synchrotron-radiation topography. The investigations confirmed that the main defect types are dislocations. The best quality crystal was grown using the Kyropoulos technique with a dislocation density of 10 2 -10 3 cm -2 and a small area with approximately 2*2 mm 2 did not show dislocation contrast in many reflections and has suitable quality for application as a backscattering monochromator. As a result, a clear correlation between growth rate and dislocation density is observed, though growth rate is not the only parameter impacting the quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A micro-alloyed ferritic steel strengthened by nanoscale precipitates

A ferritic steel with finely dispersive precipitates was investigated to reveal the fundamental strengthening mechanisms. The steel has a yield strength of 760 MPa, approximately three times higher than that of conventional Ti-bearing high strength hot-rolled sheet steels, and its ultimate tensile strength reaches 850 MPa with an elongation-to-failure value of 18%. Using energy dispersive X-ray spectroscopy (EDXS) and transmission electron microscope (TEM), fine carbides TiC with an average diameter of 10 nm were observed in the ferrite matrix of the 0.08%Ti steel, and some cubic M23C6 precipitates were also observed at the grain boundaries and the interior of the grains. The finely dispersive TiC precipitates in the matrix provide matrix strengthening. The estimated magnitude of precipitation strengthening is around 458 MPa, depending on the average size of the nanoscale precipitates. Dislocation densities increased from 3.42×1013 m-2 to 1.69 × 1014 m-2, respectively, with increasing tensile strain from 5.5% to 22%. The measured work-hardening behavior can be related to the observed dislocation accumulations resulting from the dispersive nano-scale precipitates.

36 MATERIALS SCIENCE↗

High energy X-ray characterization of the microstructure of PuGa alloy samples at macroscopic depths and non-ambient conditions

High energy (95 keV) X-rays were utilized to characterize the microstructure of eight PuGa alloy samples at room temperature and during cooling to ∼10 K. The samples had different Ga content (nominally 0-3.4 at.%), age, and history. A ninth sample, similarly characterized with neutron diffraction, was included to extend the Ga range to 7 at.%. The samples span the range from single phase α (monoclinic) to δ (face-centered cubic) PuGa, as well as a two-phase α′/δ sample. The crystallographic textures, phase fractions, lattice parameters and dislocation densities of each sample were evaluated through distinct analysis techniques. The textures of the samples were modest. In each case, the dislocation densities were relatively high, comparable to cold worked metals and metals exposed to similar radiation dose. At room temperature, the lattice parameters determined in the predominantly single-phase samples were larger than expected based on the nominal Ga concentration. The observed lattice thermal expansions of the single-phase δ samples to 10 K are self-consistent across the samples and consistent with previous measurements reported in the literature. Significantly larger thermal lattice strain is observed in the δ phase of the two-phase material due to mechanical constraint from the α′ phase, which has a three times larger thermal expansion and is much harder than the δ phase. In conclusion, the results demonstrate the unique value of high-energy X-rays for relatively routine microstructural characterization of Pu alloy samples.

36 MATERIALS SCIENCE↗

Concentration and relaxation depth profiles of In{sub x}Ga{sub 1-x}As/GaAs and GaAs{sub 1-x}P{sub x}/GaAs graded epitaxial films studied by x-ray diffraction

A method is proposed to determine the concentration and relaxation depth profiles in graded epitaxial films from x-ray reciprocal space maps (RSMs). Various approximations in the kinematical x-ray diffraction from epitaxial films with the misfit dislocation density depth profile are developed. We show that a symmetric and an asymmetric RSM, or two asymmetric RSMs, contain enough information to obtain the concentration, relaxation, and lattice tilt depth profiles without any additional assumptions. The proposed approach is applied to In{sub x}Ga{sub 1-x}As/GaAs and GaAs{sub 1-x}P{sub x}/GaAs epitaxial graded films. The reconstructed concentration and dislocation density depth profiles are found to be in an agreement with the ones expected from the growth conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗