Search NASA⌕ Search

SEARCH · Search NASA

Results for “dispersive waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

The effect of stress on ultrasonic pulses in fiber reinforced composites

An acoustical-ultrasonic technique was used to demonstrate relationships existing between changes in attenuation of stress waves and tensile stress for an eight ply 0 degree graphite-epoxy fiber reinforced composite. All tests were conducted in the linear range of the material for which no mechanical or macroscopic damage was evident. Changes in attenuation were measured as a function of tensile stress in the frequency domain and in the time domain. Stress wave propagation in these specimens was dispersive, i.e., the wave speed depends on frequency. Wave speeds varied from 267 400 cm/sec to 680 000 cm/sec as the frequency of the signal was varied from 150 kHz to 1.9 MHz which strongly suggests that flexural/lamb wave modes of propagation exist. The magnitude of the attenuation changes depended strongly on tensile stress. It was further observed that the wave speeds increased slightly for all tested frequencies as the stress was increased.

Hemann, J. H.↗
NASA NTRS1986

Effect of stress on ultrasonic pulses in fiber reinforced composites

An acoustical-ultrasonic technique was used to demonstrate relationships existing between changes in attenuation of stress waves and tensile stress on an eight ply 0 degree graphite-epoxy fiber reinforced composite. All tests were conducted in the linear range of the material for which no mechanical or macroscopic damage was evident. Changes in attenuation were measured as a function of tensile stress in the frequency domain and in the time domain. Stress wave propagation in these specimens was dispersive, i.e., the wave speed depends on frequency. Wave speeds varied from 267,400 cm/sec to 680,000 cm/sec as the frequency of the signal was varied from 150 kHz to 1.9 MHz which strongly suggests that flexural/lamb wave modes of propagation exist. The magnitude of the attenuation changes depended strongly on tensile stress. It was further observed that the wave speeds increased slightly for all tested frequencies as the stress was increased.

Hemann, J. H.↗
NASA NTRS1988

Current driven instabilities of an electromagnetically accelerated plasma

Quantitative measurements of the plasma instability that strongly affects the efficiency and lifetime of electromagnetic plasma accelerators were obtained. Experimental results are presented for the dispersion relations (wave phase velocities), spatial growth rates, and stability boundaries of accelerators. The measured critical wave parameters are found to agree well with theoretical predictions. A kinetic theoretical model was used to study current driven instabilities which are intrinsic to the high-current-carrying magnetized plasma of a magnetoplasmadynamic accelerator. Under certain conditions, marginally stable waves travelling almost perpendicular to the magnetic field are found which travel at a velocity equal to that of the electron current.

Kelly, A. J.↗
NASA NTRS1990

Measurements of dynamic Young's modulus in short specimens with the PUCOT

The piezoelectric ultrasonic composite oscillator technique (PUCOT) was used at frequencies in the range 40 to 150 kHz to measure dynamic Young's modulus for short-length single crystals of copper at temperatures in the range 25 to 650 C and for polycrystalline copper at room temperature. Corrections to the modulus for variations in length/diameter resulted in no loss of precision due to wave velocity dispersion.

Wickstrom, S. N.↗
NASA NTRS1990

A revised parametrization of the dispersion constants for high dispersion IUE images

An economical system of parameterizing dispersion constants spectra is derived and applied to International Ultraviolet Explorer (IUE) spectra by equating specific terms to geometric coordinates of an echellogram. Because of the virtual property of the IUE camera pixels, several geometrical rectifications can be performed analytically before the dispersion relations are solved for line and sample position. This permits the relations to be decoupled and reduced to two terms apiece, the simplest representation possible. A generalization of these principles allows the dispersion relations to be determined neatly in other echelle systems having certain well understood distortions. Prismatic cross dispersion, S wave distortion, and optical aberrations are some areas in which this system can be used.

Smith, Myron A.↗
NASA NTRS1992

Multi-user satellite communications system using an innovative compressive receiver

There is a need for an onboard simultaneous multi-channel demodulation system for a satellite communications system. Studies indicate that Convolve Multiply Convolve (CMC) filtering with surface acoustic wave (SAW) dispersive delay lines will eliminate the necessity of onboard satellite channelized filters of complex fourier transform processors. The reason for choosing the CMC technique is its ability to perform Fourier transformations in a shorter time with less space and power consumption than digital Fourier transform processors. Each ground terminal in this multi-users communications system is remotely located and operates independently; hence, a method of synchronizing the transmission of these users is presented which utilizes the existing Global Positioning System (GPS) system. Each ground user is equipped with a low cost ground terminal that has a synchronization subsystem attached to it. The system design of an onboard Multi-channel Receiver and Demodulator utilizes Quadrature Phase Shift Keying (QPSK) as the modulation technique. This technique provides the best figure of merit, i.e., the lowest transmitter power requirement per communication channel.

Staples, Edward J.↗
NASA NTRS1993

On the stability of nongyrotropic ion populations - A first (analytic and simulation) assessment

The wave and dispersion equations for perturbations propagating parallel to an ambient magnetic field in magnetoplasmas with nongyrotropic ion populations show, in general, the occurrence of coupling between the parallel (left- and right-hand circularly polarized electromagnetic and longitudinal electrostatic) eigenmodes of the associated gyrotropic medium. These interactions provide a means to driving linearly one mode with free-energy sources of other modes in homogeneous media. Different types of nongyrotropy bring about distinct classes of coupling. The stability of a hydrogen magnetoplasma with anisotropic, nongyrotropic protons that only couple the electromagnetic modes to each other is investigated analytically (via solution of the derived dispersion equation) and numerically (via simulation with a hybrid code). Nongyrotropy enhances growth and enlarges the unstable spectral range relative to the corresponding gyrotropic situation. The relevance of the properties of nongyrotropic populations to space plasma environments is also discussed.

Brinca, A. L.↗
NASA NTRS1994

The application of the Wigner Distribution to wave type identification in finite length beams

The object of the research described in this paper was to develop a means of identifying the wave-types propagating between two points in a finite length beam. It is known that different structural wave-types possess different dispersion relations: i.e., that their group speeds and the frequency dependence of their group speeds differ. As a result of those distinct dispersion relationships, different wave-types may be associated with characteristic features when structural responses are examined in the time frequency domain. Previously, the time-frequency character of analytically generated structural responses of both single element and multi-element structures were examined by using the Wigner Distribution (WD) along with filtering techniques that were designed to detect the wave-types present in the responses. In the work to be described here, the measure time-frequency response of finite length beam is examined using the WD and filtering procedures. This paper is organized as follows. First the concept of time-frequency analysis of structural responses is explained. The WD is then introduced along with a description of the implementation of a discrete version. The time-frequency filtering techniques are then presented and explained. The results of applying the WD and the filtering techniques to the analysis of a transient response is then presented.

Wahl, T. J.↗
NASA NTRS1994

Observation of anomalous slow-mode shock and reconnection layer in the dayside magnetospause

Plasma and magnetic field data from the International Sun-Earth Explorer ISEE 2 spacecraft recorded during an outbound crossing of the dayside, northern hemisphere magnetopause in October 29, 1979, provide evidence for a slow shock (SS) in the observed reconnection layer. This layer is found to be bounded on the magnetosheath side by the SS; near the magnetospheric side of the layer, a second current sheet is found that may have been rotational discontinuity (RD). The direction of the accelerated plasma flow, the earthward sense of the normal magnetic filed across the SS and RD, and the relative orientation of the SS and the RD all indicate that the reconection site was located south of the spacecraft. Quantitative tests show that, allowing for experiemental uncertanties, data taken upstream and downstream of the SS are consistent with coplanarity and other Rankine-Hugoniot (RH) conditions. Examiniations of the flow parameters indicates two anomalous properties of the SS: the upstream flow, viewed in the deHoffmann-Teller frame, is superalfvenic and the downstream plasma is firehose unstable. In comparison to the long-wavelength slow-mode phase speed, however, the flow in the upstream region is super slow, while in the downstream region it is subslow, as requeired for a slow-mode shock. Further properties of the shock include a large decrease in total enthalpy across it, indicating the escape of a sizable heat flux from the shock structure, and the occurrence of a polarization reversal of the tangential magnetic field within the shock layer, a feature that is predicted by linear double-polytropic Hall-MHD and results from a large increase in pressure anistropy from the upstream region, where p(sub parallel) approximately equal to p(sub perp), to the downstream region, where p(sub parrallel) greater than p(sub perp). Quantitative tests of the RD-like discontinuity show that it satisfies the necessary RH conditions within experimental uncertainties and indicate that the flow across it is earthward, that is, it is the same as for the SS. Thus the RD is propagating behind the SS in the direction away from the Earth. The reversal in the order of the discontinuities is attributed to the reversal of the slow and intermediate phase speeds produced by the pressure anistropy in the region between the RD and the SS. The linear dispersion relation and polarization properties of dispersive MHD waves in an anisotropic plasma are examined in the appendix.

Walthour, D. W↗
NASA NTRS1995

Rectangular Waveguides with Two Conventional and Two Superconducting Walls

The propagation properties of transverse electric TE(sup pm) modes and their dispersion relations in rectangular waveguides with two conventional and two superconducting walls, derived by using the Meissner boundary conditions on the superconducting walls, are presented. In addition to recovering some previously known results, some novel results have been obtained: the cut-off wavelength of the dominant TE(sup 10) mode is greater than that of the conventional TE(sub 10) mode, and the tangential electric field and normal magnetic field for the dominant mode TE(sup 10) exist on the superconducting surfaces. Expressions for electromagnetic components, surface currents, attenuation coefficient, maximum transmitted power, dispersion and wave impedance are also presented.

Yalamanchili, Raj↗
NASA NTRS1992

Dispersion in Nb microstrip transmission lines at submillimeter wave frequencies

We have measured the effects of dispersion on the resonant mode frequencies of open-ended Nb-SiO(x)-Nb microstrip transmission lines over a frequency range from 50 to 800 GHz. Submicron Nb/Al-AlOx/Nb Josephson junctions were used as both voltage-controlled oscillators and detectors to sample the high order modes of the resonators. The resonator modes are equally spaced up to about 550 GHz where the mode spacing start to decrease gradually to a minimum above the gap frequency of about 700 GHz and then increases. Results are in good agreement with the expected theoretical behavior based on the Mattis-Bardeen conductivity of the superconductor line.

Javadi, H. H. S.↗
NASA NTRS1990

Identification of structural-borne noise components by the use of time-frequency filtering

In this paper it is shown that a time-frequency analysis of a structural impulse response may be used to identify the wave types carrying significant energy through a structure. The identification of various wave types is possible since each is characterized by its own dispersion relation, with the result that each wave type may be associated with characteristic features in the time-frequency domain representation of an impulse response. In the work described here, the Wigner Distribution has been used to obtain appropriate time-frequency representations of impulse responses. Practical aspects of the calculation of the Wigner Distribution are discussed briefly and examples of its application to the analysis of structural impulse responses are given. Additionally, filtering techniques are described that can be used both to detect the presence of and to quantify the energy carried by both nondispersive and dispersive waves.

Wahl, T. J.↗
NASA NTRS1993

The application of the Wigner Distribution to the identification of structure-borne noise components

In this paper it is shown that time-frequency analysis of a transient structural response may be used to identify the wave types carrying significant energy through a structure. The identification of various wave types is possible since each is characterized by its own dispersion relation, with the result that each wave type may be associated with characteristic features in the time-frequency domain representation of a structural response. In the work described here, the Wigner Distribution has been used to obtain time-frequency representations of structural transient responses. Practical aspects of the calculation of the Wigner Distribution are discussed briefly, and examples of its application to the analysis of transient structural responses are given. Additionally, time-frequency filtering techniques are described that can be used both to detect the presence of and to quantify the energy carried by both non-dispersive and dispersive waves.

Wahl, T. J.↗
NASA NTRS1987

On the polarization, compression and nonoscillatory behavior of hydromagnetic waves associated with pickup ions

Solution of the kinetic dispersion equation shows that heavy pickup ions with large perpendicular energies excite a new hydromagnetic wave mode with maximum growth, high (magnetic field and mass density) compression ratios, and almost linear polarization coexisting slightly away 6-15 deg from parallel propagation. The mode arises from the coupling of the heavy ion beam to the modified left-hand wave dispersion caused by the multiion nature of the medium. The ion beam can also bring about nonoscillatory, purely growing structures distinct from the mirror wave through the coupling of a counter-streaming left-hand mode to a costreaming right-hand wave. The free energy source parameters are varied to determine their relative influence and define the domain of existence of the instability. Its characteristics may prove helpful in the interpretation of recent cometary (Halley and Giacobini-Zinner) and artificial release (AMPTE) observations.

Brinca, Armando L.↗
NASA NTRS1972

Approximations to the plasma dispersion function

Linear wave propagation in hot collisionless plasmas is described by the linearized Vlasov and Maxwell equations. In uniform media, the utilization of spatial and temporal transforms of those equations leads to the consideration of integrals of the Hilbert transform type. Analysis and comparison of two simple approximations are provided based on the utilization of resonance velocity distributions. Application is then made to the Landau and whistler waves, along with a discussion of the results, and commentary on possible improvements.

Brinca, A. L.↗