Search NASA⌕ Search

SEARCH · Search NASA

Results for “elastic modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Minimum film thickness in elliptical contacts for different regimes of fluid-film lubrication

The film-parameter equations are provided for four fluid-film lubrication regimes found in elliptical contacts. These regimes are isoviscous-rigid; viscous-rigid; elastohydrodynamic of low-elastic-modulus materials, or isoviscous-elastic; and elastohydrodynamic, or viscous-elastic. The influence or lack of influence of elastic and viscous effects is the factor that distinguishes these regimes. The film-parameter equations for the respective regimes come from earlier theoretical studies by the authors on elastohydrodynamic and hydrodynamic lubrication of elliptical conjunctions. These equations are restated and the results are presented as a map of the lubrication regimes, with film-thickness contours on a log-log grid of the viscosity and elasticity parameters for five values of the ellipticity parameter. The results present a complete theoretical film-parameter solution for elliptical contacts in the four lubrication regimes.

Hamrock, B. J.↗

Mechanical properties of brittle materials

Brittle materials are difficult to tensile test because of gripping problems. They either crack in conventional grips or they are crushed. Furthermore, they may be difficult to make into tensile specimens having, for example, threated ends or donut shapes. To overcome the problem, simple rectangular shapes can be used in bending (i.e., a simple beam) in order to obtain the modulus of rupture and the elastic modulus. The equipment necessary consists of a fixture for supporting the specimens horizontally at two points, these points contact points being rollers which are free to rotate. The force necessary to bend the specimen is produced by a tup attached to the crosshead of an Instron machine. Here, the experimental procedure is explained.

Cornwell, L. R.↗

Nanotubular Toughening Inclusions

Conventional toughening agents are typically rubbery materials or small molecular weight molecules, which mostly sacrifice the intrinsic properties of a matrix such as modulus, strength, and thermal stability as side effects. On the other hand, high modulus inclusions tend to reinforce elastic modulus very efficiently, but not the strength very well. For example, mechanical reinforcement with inorganic inclusions often degrades the composite toughness, encountering a frequent catastrophic brittle failure triggered by minute chips and cracks. Thus, toughening generally conflicts with mechanical reinforcement. Carbon nanotubes have been used as efficient reinforcing agents in various applications due to their combination of extraordinary mechanical, electrical, and thermal properties. Moreover, nanotubes can elongate more than 20% without yielding or breaking, and absorb significant amounts of energy during deformation, which enables them to also be an efficient toughening agent, as well as excellent reinforcing inclusion. Accordingly, an improved toughening method is provided by incorporating nanotubular inclusions into a host matrix, such as thermoset and thermoplastic polymers or ceramics without detrimental effects on the matrix's intrinsic physical properties.

Park, Cheol↗

Nanotubular Toughening Inclusions

Conventional toughening agents are typically rubbery materials or small molecular weight molecules, which mostly sacrifice the intrinsic properties of a matrix such as modulus, strength, and thermal stability as side effects. On the other hand, high modulus inclusions tend to reinforce elastic modulus very efficiently, but not the strength very well. For example, mechanical reinforcement with inorganic inclusions often degrades the composite toughness, encountering a frequent catastrophic brittle failure triggered by minute chips and cracks. Thus, toughening generally conflicts with mechanical reinforcement. Carbon nanotubes have been used as efficient reinforcing agents in various applications due to their combination of extraordinary mechanical, electrical, and thermal properties. Moreover, nanotubes can elongate more than 20% without yielding or breaking, and absorb significant amounts of energy during deformation, which enables them to also be an efficient toughening agent, as well as excellent reinforcing inclusion. Accordingly, an improved toughening method is provided by incorporating nanotubular inclusions into a host matrix, such as thermoset and thermoplastic polymers or ceramics without detrimental effects on the intrinsic physical properties of the matrix.

Park, Cheol↗

Bayesian inference of fiber orientation and polymer properties in short fiber-reinforced polymer composites

Herein we present a Bayesian methodology to infer the elastic modulus of the constituent polymer and the fiber orientation state in a short-fiber reinforced polymer composite (SFRP). The properties are inversely determined using only a few experimental tests. Developing composite manufacturing digital twins for SFRP composite processes, including injection molding and extrusion deposition additive manufacturing (EDAM) requires extensive experimental material characterization. In particular, characterizing the composite mechanical properties is time consuming and therefore, micromechanics models are used to fully identify the elasticity tensor. Hence, the objective of this paper is to infer the fiber orientation and the effective polymer modulus and therefore, identify the elasticity tensor of the composite with minimal experimental tests. To that end, we develop a hierarchical Bayesian model coupled with a micromechanics model to infer the fiber orientation and the polymer elastic modulus simultaneously which we then use to estimate the composite elasticity tensor. We motivate and demonstrate the methodology for the EDAM process but the development is such that it is applicable to other SFRP composites processed via other methods. Our results demonstrate that the approach provides a reliable framework for the inference, with as few as three tensile tests, while accounting for epistemic and aleatory uncertainty. Posterior predictive checks show that the model is able to recreate the experimental data well. The ability of the Bayesian approach to calibrate the material properties and its associated uncertainties, make it a promising tool for enabling a probabilistic predictive framework for composites manufacturing digital twins.

36 MATERIALS SCIENCE↗

Structural, Elastic, Thermodynamic, Electronic, and Magnetic Investigations of Full-Heusler Compound Ag{sub 2}CeAl: FP-LAPW Method

Structural, elastic, thermodynamic, electronic, and magnetic properties of the full-Heusler compound Ag{sub 2}CeAl were determined using generalized gradient approximation with exchange-correlation functional GGA (PBEsol) with spin-orbit coupling (SOC) correction. The elastic modulus and their pressure dependence are calculated. From the elastic parameter behavior, it is inferred that this compound is elastically stable and ductile in nature. Through the quasi-harmonic Debye model, in which the phononic effect is considered the effect of pressure P (0 to 50) and temperature T (0 to 1000) on the lattice constant, the elastic parameters, bulk modulus B, heat capacity and thermal expansion α, internal energy U, entropy S, Debye temperature 𝜃{sub D}, Helmholtz free energy A, and Gibbs free energy G are investigated. The thermodynamic properties show that the compound Ag{sub 2}CeAl is a heavy fermion material. The density of state (DOS), magnetic momentum, and band structure are computed, to investigate the magnetic and metallic characteristics. The calculated polarization of the compound is 77.34%. The obtained results are the first predictions of the physical properties for the rare-earth-based (Ce) full-Heusler Ag{sub 2}CeAl.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Re-entrant kinetic arrest and elasticity of concentrated suspensions of spherical and nonspherical repulsive and attractive colloids

We have designed and studied a new experimental colloidal system to probe how the weak shape anisotropy of uniaxial particles and variable repulsive (Coulombic) and attractive (van der Waals) forces influence slow dynamics, shear elasticity, and kinetic vitrification in dense suspensions. The introduction of shape anisotropy dramatically delays kinetic vitrification and reduces the shear elastic modulus of colloidal diatomics relative to their chemically identical spherical analogs. Tuning the interparticle interaction from repulsive, to nearly hard, to attractive by increasing suspension ionic strength reveals a nonmonotonic re-entrant dynamical phase behavior (glass–fluid–gel) and a rich variation of the shear modulus. The experimental results are quantitatively confronted with recent predictions of ideal mode coupling and activated barrier hopping theories of kinetic arrest and elasticity, and good agreement is generally found with a couple of exceptions. Furthermore, the systems created may have interesting materials science applications such as flowable ultrahigh volume fraction suspensions, or responsive fluids that can be reversibly switched between a flowing liquid and a solid nonequilibrium state based on in situ modification of suspension ionic strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of micron-scale manufacturing flaws on the tensile response of centimeter sized two-photon polymerization microlattices

Two-photon polymerization (TPP) is a unique fabrication technique that enables sub-micron scale resolution. Herein, we report on uniaxial tensile tests on millimeter-sized TPP log-pile structures that were fabricated using a recently developed interdigitated stitching strategy. As expected, the Young’s modulus increased with laser intensity, however elastic modulus, ultimate strength and strain-at-failure varied widely, even for nominally identical samples. Post-mortem analysis revealed a series of print defects resulting from various sources including misalignments, resin shrinkage, laser beam shadowing, and local depletion of the oxygen inhibitor. While some of the defects can be eliminated, such as misalignments due to insufficient precision of the mechanical stage, others are more intrinsic to TPP and thus more difficult to address.

36 MATERIALS SCIENCE↗

An Investigation of the Structural Phase Transition of Ammonia Borane

A detailed anelastic spectroscopy study of the structural phase transition of ammonia borane was conducted for the first time. The transformation from the tetragonal high temperature phase into the orthorhombic low temperature one is detected on cooling around 220K by a huge drop of the elastic modulus and a spike of the elastic energy dissipation.We find clear indications of a hysteresis, which led us to conclude that the transition is of first-order. The kinetics of the transitionwas investigated in detail. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

36 MATERIALS SCIENCE↗

Through-Thickness Tensile Properties of Triaxial Braided Composites

The through-thickness strength of triaxial braided composites was measured using thin specimens bonded to metallic tabs. Despite providing reasonable engineering estimates of the bulk properties, some test specimen limitations were noted: For strong epoxies, significant shear and tensile stresses occur and induce failure between the first layer and bond-line; the strains over much of the exterior are ~10% lower than interior strains, which are representative of the nominal state; and failure often occurred near or along the adhesive bond line. These interference were partially overcome by adding a large radius to the gage section. Based on the finite element analysis and experimental measurements, the nominal elastic modulus and Poisson's ratio are E(sub 33) = 10.7 GPa and v(sub 31) = 0.08 for the three triaxial braided composites tested. Strengths vary from 14 to 40 MPa depending on the resin. Relative to the in-plane properties, the through thickness modulus, fracture strength, failure strain, and Poisson's ratio are 1/5th, 1/30th, 1/6th, and 1/4th. Interlaminar failure occurred with varying degrees of fiber tear out along with little damage to axial tows, resulting is a smooth undulating fracture surface. Post cure temperature excursions to 177 deg C (350 deg F) had little effect on elastic constants but reduced the strength E862 based composites severely. The strength of PR520 and 5208 based composites increased.

composite↗

Superior High-Temperature Strength in a Supersaturated Refractory High-Entropy Alloy

Refractory high-entropy alloys (RHEA) show promising applications at high temperatures. However, achieving high strengths at elevated temperatures above 1,173K is still challenging due to heat softening. Using intrinsic material characteristics as the alloy-design principles, a single-phase body-centered-cubic (BCC) CrMoNbV RHEA with high-temperature strengths (beyond 1,000 MPa at 1,273 K) is designed, superior to other reported RHEAs as well as conventional superalloys. The origin of the high-temperature strength is revealed by in-situ neutron scattering, transmission-electron microscopy, and first-principles calculations. The CrMoNbV’s elevated-temperature strength retention up to 1,273 K arises from its large atomic-size and elastic-modulus mismatches, the insensitive temperature dependence of elastic constants, and the dominance of non-screw character dislocations caused by the strong solute pinning, which makes the solid-solution strengthening pronounced. The alloy-design principles and the insights in this study pave the way to design RHEAs with outstanding high-temperature strength.

36 MATERIALS SCIENCE↗

Changes in the Structure and Mechanical Properties of Hard Elastic and Porous Polypropylene Films upon Annealing and Orientation

The effect of the annealing temperature on the characteristics of hard elastic polypropylene samples obtained by annealing of extruded films and having an oriented lamellar structure is studied. It is established using the methods of X-ray scattering and differential scanning calorimetry that the lamellae thickness, the large period, and the degree of orientation of the folded lamellae increase with an increase in the annealing temperature, which is accompanied by an increase in the melting temperature and enthalpy. Porous films are obtained by uniaxial extension of the annealed samples in the orientation direction. It is shown that the porosity and permeability of the porous films increase with an increase in the annealing temperature, owing to an increase in the number and sizes of the through channels. The mechanical characteristics (strength, elastic modulus, and break elongation) of the hard elastic and porous films are measured, and their relationship with changes in the structure and orientation of the samples, depending on the annealing temperature, is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Composite wall concept for high temperature turbine shrouds: Survey of low modulus strain isolator materials

Plasma sprayed yttria stabilized zirconium oxide turbine seal specimens, incorporating various low modulus porous metal strain isolator pads between the zirconium oxide and a dense metal substrate, were subjected to cyclic thermal shock testing. Specimens that had a low modulus pad composed of sintered FeNiCrAlY fibermetal survived 1000 thermal shock cycles without spalling of the ceramic. A figure of merit for the low modulus pad materials taking into consideration the elastic modulus, thermal conductivity, strength, and oxidation resistance of the pad was proposed, and showed reasonable agreement with the thermal shock results. A potential surface distress problem on the zirconium oxide, associated with nonuniform temperature distribution and rapid stress relaxation was identified. One approach to solving the surface distress problem through application of laser surface fusion of the zirconium oxide layer showed some promise, but improvements in the laser surface fusion process are necessary to prevent process associated damage to the ceramic.

Bill, R. C.↗

The Effect of Pre-Stressing on the Static Indentation Load Capacity of the Superelastic 60NiTi

Superelastic nickel-titanium alloys, such as 60NiTi (60Ni-40Ti by wt.%), are under development for use in mechanical components like rolling element bearings and gears. Compared to traditional bearing steels, these intermetallic alloys, when properly heat-treated, are hard but exhibit much lower elastic modulus (approx.100 GPa) and a much broader elastic deformation range (approx.3 percent or more). These material characteristics lead to high indentation static load capacity, which is important for certain applications especially space mechanisms. To ensure the maximum degree of elastic behavior, superelastic materials must be pre-stressed, a process referred to as "training" in shape memory effect (SME) terminology, at loads and stresses beyond expected use conditions. In this paper, static indentation load capacity tests are employed to assess the effects of pre-stressing on elastic response behavior of 60NiTi. The static load capacity is measured by pressing 12.7 mm diameter ceramic Si3N4 balls into highly polished, hardened 60NiTi flat plates that have previously been exposed to varying levels of pre-stress (up to 2.7 GPa) to determine the load that results in shallow but measurable (0.6 m, 25 in. deep) permanent dents. Hertz stress calculations are used to estimate contact stress. Without exposure to pre-stress, the 60NiTi surface can withstand an approximately 3400 kN load before significant denting (>0.4 m deep) occurs. When pre-stressed to 2.7 GPa, a static load of 4900 kN is required to achieve a comparable dent, a 30 percent increase. These results suggest that stressing contact surfaces prior to use enhances the static indentation load capacity of the superelastic 60NiTi. This approach may be adaptable to the engineering and manufacture of highly resilient mechanical components such as rolling element bearings.

DellaCorte, Christopher↗

Data from: "Growth strategies and threshold responses to water deficit modulate effects of warming on tree seedlings from forest to alpine"

This data package contains data that were used to support conclusions drawn in “Growth strategies and threshold responses to water deficit modulate effects of warming on tree seedlings from forest to alpine”, by Lazarus, Castanha et al. 2017. Data were collected at field sites within the Alpine Treeline Warming Experiment (ATWE) on Niwot Ridge, Colorado, USA, and at the U.S. Geological Survey laboratory located in Boise, Idaho. This archive contains comma-separated-values (.csv) files, as well as the same files in Microsoft Excel (.xlsx) format, which can be opened by either Microsoft Excel, R, or any simple text editor program. There are two types of geospatial data files: .kml and ESRI shapefiles (.shp). The kml files contain placemarks, which can be opened by Google Earth, or Google Maps. The ESRI shapefiles can be opened by any geographic information system application that can read shapefiles, including ESRI's entire ArcGIS suite, and QGIS. We asked whether and how tree species differences in response to water deficit relates to their establishment along the gradient from forest to alpine. To do this, we compared growth and moisture stress responses in first-year seedlings of three species planted in common gardens subject to a factorial of heating and watering treatments below, at, and above tree line. This combination of an elevation gradient alongside warming and watering treatments enabled us to observe species differences in seedling responses to a broad set of climatic conditions.Entire seedlings were harvested at c. 3- and again at 9 weeks of age following germination/emergence in the experimental plots, and we then measured dry mass (DM) of above and belowground parts, root length, root mass fraction (RMF), relative growth rates (RGRs) from seed to 3 weeks and from 3 to 9 weeks, turgor-loss point (TLP), and photosynthetic WUE (as δ13C). Also included in this dataset (but not described in the manuscript) are measures of specific leaf area (SLA) and other variables generated by pressure-volume curves (saturated water content, osmotic potential at full turgor, elastic modulus).

54 ENVIRONMENTAL SCIENCES↗

Inspection and Test Report for the Removed 241-C-107 Dome Concrete.

This report presents the results of the examination and testing of the 55 inch diameter concrete dome 'Plug' removed from SST 241-C-107. Photographs and discussion of field inspection of the dome 'Plug' cross section are provided. Fourteen concrete cores removed from the dome 'Plug' were sent offsite for testing. Twelve cores were subject to transverse frequency, elastic modulus, Poisson's ratio, and compression testing. Two cores were subjected to petrographic examination. This report documents represents further implementation of the Single Shell Tank Integrity Project Expert Panel recommendation, SI-5, Test Dome Concrete and Rebar 'Plugs'.

36 MATERIALS SCIENCE↗

Nanoscale elastic changes in 2D Ti 3 C 2 T x (MXene) pseudocapacitive electrodes

Designing sustainable electrodes for next generation energy storage devices relies on the understanding of their fundamental properties at the nanoscale, including the comprehension of ions insertion into the electrode and their interactions with the active material. One consequence of ion storage is the change in the electrode volume resulting in mechanical strain and stress that can strongly affect the cycle life. Therefore, it is important to understand the changes of dimensions and mechanical properties occurring during electrochemical reactions. While the characterization of mechanical properties via macroscopic measurements is well documented, in-situ characterization of their evolution has never been achieved at the nanoscale. Two dimensional (2D) carbides, known as MXenes, are promising materials for supercapacitors and various kinds of batteries, and understating the coupling between their mechanical and electrochemical properties is therefore necessary. Here we report on in-situ imaging, combined with density functional theory of the elastic changes, of a 2D titanium carbide (Ti 3 C 2 T x ) electrode in direction normal to the basal plane during cation intercalation. The results show a strong correlation between the Li+ ions content and the elastic modulus, whereas little effects of K+ ions are observed. Moreover, this strategy enables identifying the preferential intercalation pathways within a single particle.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A multiscale hydro-geochemical-mechanical approach to analyze faulted CO 2 reservoirs: Original Research Article: A multiscale hydro-geochemical-mechanical approach to analyze faulted CO 2 reservoirs

This paper applies a multiscale hydro-geochemical-mechanical approach to analyze faulted CO 2 reservoirs using the STOMP-CO 2 -R code that is coupled to the ABAQUS® finite element package. STOMP-CO 2 -R models the reactive transport of CO 2 causing mineral volume fraction changes that are captured by an Eshelby-Mori-Tanka model implemented in ABAQUS®. A three-dimensional (3D) STOMP-CO 2 -R model for a reservoir containing an inclined fault was built to analyze a formation containing a reaction network with 5 minerals: albite, anorthite, calcite, kaolinite and quartz. A 3D finite element mesh that exactly maps the STOMP-CO 2 -R grid is developed for coupled hydro-geochemical-mechanical analyses. The model contains alternating sandstone and shale layers. The impact of reactive transport of CO 2 on the geomechanical properties of reservoir rocks and seals are studied in terms of mineral composition changes that affect their geomechanical responses. Simulations assuming extensional and compressional stress regimes with and without coupled geochemistry are performed to study the stress regime effect on the risk of hydraulic fracture. The tendency for the fault to slip is examined in terms of stress regime, geomechanical and geochemical-mechanical effects as well as fault inclination. The results show that mineralogical changes due to long-term injection of CO 2 reduce the permeability and elastic modulus of the reservoir, leading to increased risk of hydraulic fracture in the injection location and at the caprock seal immediately above the injection zone. Fault slip is not predicted to occur. However, fault inclination and stress regime have an important impact on the slip tendency factor.

54 ENVIRONMENTAL SCIENCES↗