Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron mobility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

GaSb/GaP compliant interface for high electron mobility AlSb/InAs heterostructures on (001) GaP

We report on the epitaxial growth of an AlSb/InAs heterostructure on a (001) GaP substrate. We investigate the conditions for the most efficient relaxation of GaSb islands on GaP. In particular, we show that the GaP surface treatment and the growth temperature are crucial for the formation of a two-dimensional periodic array of 90 deg. misfit dislocations at the episubstrate interface. With this relaxation process, an AlSb/InAs heterostructure exhibiting a room temperature mobility of 25 500 cm{sup 2} V{sup -1} s{sup -1} on GaP is demonstrated. This result paves the way to the integration of Sb-based devices on Si substrates through the use of GaP/Si templates.

36 MATERIALS SCIENCE↗

Electronic noise in high electron-mobility transistors under photo-excitation conditions

The hydrodynamic approach based on the carrier concentration and velocity conservation equations is used to investigate the influence of photo-excitation of plasma waves at the beating frequency of two lasers on the intrinsic extra noise in InGaAs HEMTs caused by thermally-induced plasma oscillations. It is found that, by increasing the amplitude of the photo-excitation, a significant supression of the intrinsic excess noise is observed at the beating frequency as well as at all the frequencies where plasma waves can be excited.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ plasma enhanced atomic layer deposition half cycle study of Al{sub 2}O{sub 3} on AlGaN/GaN high electron mobility transistors

A half cycle study of plasma enhanced atomic layer deposited (PEALD) Al{sub 2}O{sub 3} on AlGaN is investigated using in situ X-ray photoelectron spectroscopy, low energy ion scattering, and ex situ electrical characterizations. A faster nucleation or growth is detected from PEALD relative to purely thermal ALD using an H{sub 2}O precursor. The remote O{sub 2} plasma oxidizes the AlGaN surface slightly at the initial stage, which passivates the surface and reduces the OFF-state leakage. This work demonstrates that PEALD is a useful strategy for Al{sub 2}O{sub 3} growth on AlGaN/GaN devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improved Off-State Stress Critical Voltage on AlGaN/GaN High Electron Mobility Transistors Utilizing Pt/Ti/Au Based Gate Metallization

The critical voltage for degradation of AlGaN/GaN high electronmobility transistors (HEMTs) employed with the Pt/Ti/Au gatemetallization instead of the commonly used Ni/Au wassignificantly increased during the off-state stress. The typicalcritical voltage for HEMTs with Ni/Au gate metallization wasaround -60V. By sharp contrast, no critical voltage was observedfor the HEMTs with Pt/Ti/Au gate metallization, even up to -100V,which was the instrumental limitation in this experiment. BothSchottky forward and reverse gate characteristics of the Ni/Audegraded once the gate voltage passed the critical voltage ofaround -60V. There was no degradation exhibited for the HEMTswith Pt-gated HEMTs.

99 GENERAL AND MISCELLANEOUS↗

Investigation of gate leakage mechanism in Al{sub 2}O{sub 3}/Al{sub 0.55}Ga{sub 0.45}N/GaN metal-oxide-semiconductor high-electron-mobility transistors

The mechanism of both reverse and forward gate leakage currents in Al{sub 2}O{sub 3}/Al{sub 0.55}Ga{sub 0.45}N/GaN structures was studied in this Letter by temperature-dependent current-voltage measurement. Poole–Frenkel (PF) emission, an oxygen vacancy-assisted process, was deduced as the dominant mechanism at high-temperatures (>388 K), and the leakage current at mid-temperatures (<388 K) were found greatly impacted by temperature-independent tunneling current. The reverse PF mission current in low-field, mid-field, and high-field region were related to trap states with activation energy of 0.41 eV, 0.49 eV, and 0.71 eV, respectively, and the activation energy of trap states for forward PF emission current was derived as 0.65 eV.

36 MATERIALS SCIENCE↗

Degradation of AlGaN/GaN high-electron mobility transistors in the current-controlled off-state breakdown

We investigate degradation mechanisms in AlGaN/GaN HEMTs which were repeatedly driven into the current-controlled off-state breakdown or subject to 60 s voltage- or current-controlled off state stresses. The current-controlled sweep in to the breakdown allows the sustainability of breakdown that can not be observed in the voltage controlled sweep. Only temporal changes were observed in the HEMT dc performance after repetitive sweeps, which were explained by charging/discharging of the HEMT surface at the gate-to-drain access region and in the GaN buffer below the gate. Similar changes were observed also if high-voltage stress has been applied on the drain; however, permanent degradation appears after 60 s current-controlled breakdown stress. In this case, the drain leakage current, as well as the breakdown current, increases significantly. On the other hand, the breakdown voltage, as well as the gate characteristics, remains unaltered. We suggest that the avalanche-injection process is governing the off-state breakdown event with a dominant role of the potential barrier at the channel-buffer interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sulfuric acid and hydrogen peroxide surface passivation effects on AlGaN/GaN high electron mobility transistors

In this work, we have compared SiN{sub x} passivation, hydrogen peroxide, and sulfuric acid treatment on AlGaN/GaN HEMTs surface after full device fabrication on Si substrate. Both the chemical treatments resulted in the suppression of device pinch-off gate leakage current below 1 μA/mm, which is much lower than that for SiN{sub x} passivation. The greatest suppression over the range of devices is observed with the sulfuric acid treatment. The device on/off current ratio is improved (from 10{sup 4}–10{sup 5} to 10{sup 7}) and a reduction in the device sub-threshold (S.S.) slope (from ∼215 to 90 mV/decade) is achieved. The sulfuric acid is believed to work by oxidizing the surface which has a strong passivating effect on the gate leakage current. The interface trap charge density (D{sub it}) is reduced (from 4.86 to 0.90 × 10{sup 12 }cm{sup −2} eV{sup −1}), calculated from the change in the device S.S. The gate surface leakage current mechanism is explained by combined Mott hopping conduction and Poole Frenkel models for both untreated and sulfuric acid treated devices. Combining the sulfuric acid treatment underneath the gate with the SiN{sub x} passivation after full device fabrication results in the reduction of D{sub it} and improves the surface related current collapse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of Failure Mode and Effects Analysis to Intraoperative Radiation Therapy Using Mobile Electron Linear Accelerators

Purpose: Failure mode and effects analysis (FMEA) represents a prospective approach for risk assessment. A multidisciplinary working group of the Italian Association for Medical Physics applied FMEA to electron beam intraoperative radiation therapy (IORT) delivered using mobile linear accelerators, aiming at preventing accidental exposures to the patient. Methods and Materials: FMEA was applied to the IORT process, for the stages of the treatment delivery and verification, and consisted of three steps: 1) identification of the involved subprocesses; 2) identification and ranking of the potential failure modes, together with their causes and effects, using the risk probability number (RPN) scoring system, based on the product of three parameters (severity, frequency of occurrence and detectability, each ranging from 1 to 10); 3) identification of additional safety measures to be proposed for process quality and safety improvement. RPN upper threshold for little concern of risk was set at 125. Results: Twenty-four subprocesses were identified. Ten potential failure modes were found and scored, in terms of RPN, in the range of 42-216. The most critical failure modes consisted of internal shield misalignment, wrong Monitor Unit calculation and incorrect data entry at treatment console. Potential causes of failure included shield displacement, human errors, such as underestimation of CTV extension, mainly because of lack of adequate training and time pressures, failure in the communication between operators, and machine malfunctioning. The main effects of failure were represented by CTV underdose, wrong dose distribution and/or delivery, unintended normal tissue irradiation. As additional safety measures, the utilization of a dedicated staff for IORT, double-checking of MU calculation and data entry and finally implementation of in vivo dosimetry were suggested. Conclusions: FMEA appeared as a useful tool for prospective evaluation of patient safety in radiotherapy. The application of this method to IORT lead to identify three safety measures for risk mitigation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Monolayer 2D semiconducting tellurides for high-mobility electronics

Discovery and design of two-dimensional (2D) materials with suitable band gaps and high carrier mobility are of vital importance for the photonics, optoelectronics, and high-speed electronics. In this work, based on first principles calculations using density functional theory with Perdew-Burke-Ernzerhof and Heyd-Scuseria-Ernzerhoffunctionals, we introduce a family of monolayer isostructural semiconducting tellurides MNTe 4 , with M={Ti,Zr,Hf} and N={Si,Ge}. We find that these compounds have been identified to possess direct band gaps from 1.0 to 1.31 eV, which are well suited for photonics and optoelectronics applications. Additionally, anisotropic in-plane transport behavior is observed, and small electron and hole (0.11–0.15m e ) effective masses are identified along the dominant transport direction. Ultrahigh carrier mobility is predicted for this family of 2D compounds, which host great promise for potential applications in high-speed electronic devices. Furthermore, detailed analysis of electronic structures reveals the origins of the promising properties of this unique class of 2D telluride materials.

2-dimensional systems↗

Rate versus Free Energy Change for Attaching Highly Mobile Electrons to Molecules in Nonpolar Liquids

The inverted region of the Marcus theory, usually absent for bimolecular electron transfer reactions, is clearly observed for electron attachment reactions to molecules in nonpolar fluids. Application of pressure increased the energies of the solvated electron reactants letting us continuously adjust the free energy change. Inverted behavior is enabled by the very high mobilities of the solvated electrons which raise the diffusion-controlled encounter rates so high that they do not limit the reaction rates. The nonpolar media used in these experiments reduce reorganization energies, enhancing inverted behavior. Still, for every case showing an inverted region, the presence of low-lying excited states in the product radical anions led to regions of increasing rate constants that began at the energies of excited states of –0.54 to –1.2 eV. Here, while continuum models predict no solvent reorganization energy in nonpolar liquids, fits to the data found solvent reorganization energies of 0.05–0.4 eV supporting ideas advanced in theories of Matyushov.

14 SOLAR ENERGY↗

Electronic mobility, doping, and defects in epitaxial BaZrS 3 chalcogenide perovskite thin films

We present the electronic transport properties of BaZrS 3 thin films grown epitaxially by gas-source molecular beam epitaxy. We observe n-type behavior in all samples, with carrier concentration ranging from 4 × 10 18 to 4 × 10 20 cm −3 at room temperature (RT). We observe a champion RT Hall mobility of 11.1 cm 2 V −1 s −1 , which is competitive with established thin-film photovoltaic absorbers. Temperature-dependent Hall mobility data show that phonon scattering dominates at room temperature, in agreement with computational predictions. X-ray diffraction data illustrate a correlation between mobility and antiphase boundary concentration, illustrating how microstructure can affect transport. Despite the well-established environmental stability of chalcogenide perovskites, we observe significant changes to electronic properties as a function of storage time in ambient conditions. With the help of secondary ion mass spectrometry measurements, we propose and support a defect mechanism that explains this behavior: as-grown films have a high concentration of sulfur vacancies that are shallow donors (V ⋅ S or V ⋅⋅ S ), which are converted into neutral oxygen defects (O$^{×}_{S}$) upon air exposure. We discuss the relevance of this defect mechanism within the larger context of chalcogenide perovskite research, and we identify means to stabilize the electronic properties.

Van Sambeek, Jack [Massachusetts Institute of Tech↗

Rode's iterative calculation of surface optical phonon scattering limited electron mobility in N-polar GaN devices

N-polar GaN channel mobility is important for high frequency device applications. Here, we report theoretical calculations on the surface optical (SO) phonon scattering rate of two-dimensional electron gas (2DEG) in N-polar GaN quantum well channels with high-k dielectrics. Rode's iterative calculation is used to predict the scattering rate and mobility. Coupling of the GaN plasmon modes with the SO modes is taken into account and dynamic screening is employed under linear polarization response. The effect of SO phonons on 2DEG mobility was found to be small at >5 nm channel thickness. However, the SO mobility in 3 nm N-polar GaN channels with HfO{sub 2} and ZrO{sub 2} high-k dielectrics is low and limits the total mobility. The SO scattering for SiN dielectric on GaN was found to be negligible due to its high SO phonon energy. Using Al{sub 2}O{sub 3}, the SO phonon scattering does not affect mobility significantly only except the case when the channel is too thin with a low 2DEG density.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comment on “A study of vertical and in-plane electron mobility due to interface roughness scattering at low temperature in InAs-GaSb superlattices” [J. Appl. Phys. 114, 053712 (2013)]

The purpose of this comment is to point out that the paper by Safa, Asgari, and Faraone [J. Appl. Phys. 114, 053712 (2013)] (SAF) on electronic transport in superlattices contains a number of errors in physics and execution. By dealing with a finite number of periods and forcing the wave function to be zero at the upper and lower boundaries of the superlattice stack, SAF have turned the system into a quantum well for which the momentum along the growth axis is not a good quantum number, so that the bands in the growth direction are flat and the corresponding carrier velocities and vertical mobilities are zero. A number of other errors allow the authors to get nonzero results and to reach conclusions that qualitatively mirror those of Szmulowicz, Haugan, Elhamri, and Brown [Phys. Rev. B 84, 155307 (2011)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Natural 2D Heterostructure [Pb 3.1 Sb 0.9 S 4 ][Au x Te 2– x ] with Large Transverse Nonsaturating Negative Magnetoresistance and High Electron Mobility

We report the two-dimensional (2D) natural hetero-structure [Pb 3.1 Sb 0.9 S 4 ][Au$_x$Te$_{2-x}$] ($x$ = 0.52-0.36) which shows anomalous, transverse nonsaturating negative magnetoresistance (MR). For $x$ = 0.52, the material has a commensurately modulated structure with alternating [Pb3.1Sb0.9S4] rocksalt layers and atomically thin [Au$_x$Te$_{2-x}$] sheets, as determined by single-crystal X-ray diffraction using a (3 + 1)-dimensional space group; for other $x$ compositions, the modulated structure is absent and the Au and Te atoms are disordered. The transport properties in this system at low temperature (<100 K) are dominated by an unusual 2D hopping mechanism, while at room temperature a high carrier mobility of similar to ~1352 cm 2 V -1 s -1 obtained ($x$ = 0.36). The confined electrons within the [Au$_x$Te$_{2-x}$] layers are also exposed to interlayer coupling with the insulating [Pb 3.1 Sb 0.9 S 4 ] layers, and as a result, the properties of the heterostructures emerge not only from the constituent layers but also the interactions between them. Furthermore, the various Au and Te coordination patterns found in the [Au$_x$Te$_{2-x}$] sheets as a function of $x$ further contribute to a unique electronic structure that leads to the anomalous nonsaturating negative MR with different field dependent behaviors. First-principles calculations indicate that the [Au$_x$Te$_{2-x}$] sheets are responsible for the unusual electrical transport properties in this 2D system.

2D materials↗

Electron mobility enhancement in an undoped Si/SiGe heterostructure by remote carrier screening

Here, we investigate the effects of surface tunneling on electrostatics and transport properties of two-dimensional electron gases (2DEGs) in undoped Si/SiGe heterostructures with different 2DEG depths. By varying the gate voltage, four stages of density-mobility dependence are identified with two density saturation regimes observed, which confirms that the system transitions between equilibrium and nonequilibrium. Mobility is enhanced with an increasing density at low biases and, counterintuitively, with a decreasing density at high biases as well. The density saturation and mobility enhancement can be semiquantitatively explained by a surface tunneling model in combination with a bilayer screening theory

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of crystal orientation on conductivity and electron mobility in single-crystal alumina

The electrical conductivity of high-purity, single-crystal alumina is determined parallel to and perpendicular to the c-axis. The mean conductivity of four samples of each orientation is a factor 3.3 higher parallel to the c-axis than perpendicular to it. The conductivity as a function of temperature is attributed to extrinsic electron conduction at temperatures from 400 to 900 C, and intrinsic semiconduction at temperatures from 900 to 1300 C. In the high-temperature regime, the slope on all eight specimens is 4.7 +/- 0.1 eV. Hence, the thermal bandgap at O K is 9.4 +/- 0.2 eV.

Will, Fritz G.↗

High Electron Mobility SiGe/Si Transistor Structures on Sapphire Substrates

SiGe/Si n-type modulation doped field effect structures and transistors (n-MODFETs) have been fabricated on r-plane sapphire substrates. The structures were deposited using molecular beam epitaxy, and antimony dopants were incorporated via a delta doping process. Secondary ion mass spectroscopy (SIMS) indicates that the peak antimony concentration was approximately 4 x 10(exp 19) per cubic centimeter. At these two temperatures, the electron carrier densities were 1.6 and 1.33 x 10(exp 12) per square centimeter, thus demonstrating that carrier confinement was excellent. Shubnikov-de Haas oscillations were observed at 0.25 K, thus confirming the two-dimensional nature of the carriers. Transistors, with gate lengths varying from 1 micron to 5 microns, were fabricated using these structures and dc characterization was performed at room temperature. The saturated drain current region extended over a wide source-to-drain voltage (V (sub DS)) range, with V (sub DS) knee voltages of approximately 0.5 V and increased leakage starting at voltages slightly higher than 4 V.

Alterovitz, Samuel A.↗

A high-mobility electronic system at an electrolyte-gated oxide surface

Electrolyte gating is a powerful technique for accumulating large carrier densities at a surface. Yet this approach suffers from significant sources of disorder: electrochemical reactions can damage or alter the sample, and the ions of the electrolyte and various dissolved contaminants sit Angstroms from the electron system. Accordingly, electrolyte gating is well suited to studies of superconductivity and other phenomena robust to disorder, but of limited use when reactions or disorder must be avoided. Here we demonstrate that these limitations can be overcome by protecting the sample with a chemically inert, atomically smooth sheet of hexagonal boron nitride. We illustrate our technique with electrolyte-gated strontium titanate, whose mobility when protected with boron nitride improves more than 10-fold while achieving carrier densities nearing 10 14 cm –2 . In conclusion, our technique is portable to other materials, and should enable future studies where high carrier density modulation is required but electrochemical reactions and surface disorder must be minimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗