Search NASA⌕ Search

SEARCH · Search NASA

Results for “fracture simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Enhanced Interfacial Bonding of Graft Copolymers

To understand how thermoplastic welding strength can be tuned through chemical modifications and macromolecular topology, we combined coarse-grained molecular dynamics (MD) simulations with experimental validation. Our simulations examined the diffusion dynamics of both linear and graft polymers across representative interfaces, revealing that diffusion-controlled interdigitation follows a power law, with the exponent decreasing from 0.34 to 0.11 as grafting density increases from 7.5 to 196% (with side chains grafted to both sides of a monomer unit). The addition of side chains enhances welding efficiency, as dense bottlebrush polymers with high grafting density reach maximum rupture strength faster than linear polymers. However, their saturated rupture strength is lower. This observation is subsequently corroborated by experimental lap-shear tests comparing linear polyethylene with octene grafted polyethylene elastomers. Our MD simulations show that unlike linear polymers, where backbone entanglements dominate, the grafted side chains introduce mechanisms in addition to entanglement dilution. The rapid interdigitation of side chains creates a dense mesh of entropic van der Waals contacts, which can also enhance the film welding. Furthermore, our MD simulations reveal a brittle rupture behavior in linear and comb-like (mildly grafted) polymers, while bottlebrush (densely grafted) polymers display elastomeric behavior with a pronounced stress plateau prior to fracture. Our simulations deconvolute the influence of polymer topology on deformation behavior. The rate of polymer deformation becomes lower than the applied strain rate prior to rupture, and the onset of this deviation is progressively delayed from linear to bottlebrush polymers. This trend highlights the critical role of molecular architecture in governing the mechanical response. In conclusion, these results provide deeper insight into the underlying welding mechanisms of topological polymers and present a potential approach for mitigating the interface anisotropy that is inherent in advanced manufacturing techniques such as fused filament fabrication.

graft copolymers↗

Go/No-Go Decision Point 1 Report

To satisfy the G/NG point 1 we have employed GEOS hydraulic fracturing module to simulate one of the Diagnostic Fracture Injection Tests conducted at well 58-32. The hydraulic fracturing solver relies on a finite element discretization of the mechanics fully coupled to a finite volume discretization of the fluid flow. Fractures are explicitly modeled as lower dimensional manifolds and discretized by 2D elements sitting at the boundary of cell elements. We have calibrated our model to reproduce the DFIT corresponding to Zone 2 Cycle 4 of the injection tests that took place at well 58-32.

15 GEOTHERMAL ENERGY↗

Modeling Three-Dimensional Fluid-Driven Propagation of Multiple Fractures using TOUGH-FEMM

Here, a novel numerical simulation tool named TOUGH-FEMM is presented and applied to model three-dimensional (3D) hydraulic fracturing in porous rock. The fluid flow in both fractures and porous rock is modeled using TOUGH2, which is a well-established code for analysis of multiphase and multi-component fluid flow. Rock deformations associated with fracture propagation are modeled using finite element-meshfree method (FEMM). FEMM is an approach to simulate fracture propagation without remeshing, in which the fracture path does not need to be predetermined. Fracture mechanics with mixed-mode stress intensity factors are employed to detect fracture instability and determine the direction of fracture propagation. TOUGH-FEMM is confirmed for modeling fluid-driven fracture propagation in 3D through a number of simulation examples, including modeling of hydraulic fracturing laboratory experiments and by comparison to independent numerical simulation results for multiple interacting hydraulic fractures at ten to hundred meter scale.

58 GEOSCIENCES↗

Experimental development of low-frequency shear modulus and attenuation measurements in mated rock fractures: Shear mechanics due to asperity contact area changes with normal stress

Reservoir core measurements can help guide seismic monitoring of fluid-induced pressure variations in tight fractured reservoirs including those targeted for supercritical CO 2 injection. We present the first seismic-frequency ‘room-dry’ measurements of fracture specific shear stiffness, using artificially fractured standard granite samples with different degrees of mating, a well-mated tensile fracture from a dolomite reservoir core, as well as simple roughened polymethyl methacrylate (PMMA) surfaces. We have adapted a low-frequency (0.01 to 100 Hz) shear modulus and attenuation apparatus to explore the seismic signature of fractures and understand the mechanics of asperity contacts under a range of normal stress conditions. Our instrument is unique in its ability to measure at low normal stresses (0.5 – 20 MPa), simulating 'open' fractures in shallow or high fluid pressure reservoirs. The accuracy of our instrument is demonstrated by calibration and comparison to ultrasonic measurements and low-frequency direct shear measurements of intact samples from the literature. Pressure sensitive film was used to measure real contact area of the fracture surfaces. The fractured shear modulus for the majority of the samples shows an exponential dependence on real contact area. A simple numerical model, with one bonded circular asperity, predicts this behavior and matches the data for the simple PMMA surfaces. The rock surfaces reach their intact moduli at lower contact area than the model predicts, likely due to more complex geometry. Lastly, we apply our results to a Linear-Slip Interface Model to estimate reflection coefficients and calculate shear wave time delays due to the lower wave velocities through the fractured zone. We find that cross-well surveys could detect even well-mated hard rock fractures assuming the availability of high repeatability acquisition systems.

58 GEOSCIENCES↗

Mesoscale informed parameter estimation through machine learning: A case-study in fracture modeling

Scale bridging is a critical need in computational sciences, where the modeling community has developed accurate physics models from first principles, of processes at lower length and time scales that influence the behavior at the higher scales of interest. However, it is not computationally feasible to incorporate all of the lower length scale physics directly into upscaled models. This is an area where machine learning has shown promise in building emulators of the lower length scale models, which incur a mere fraction of the computational cost of the original higher fidelity models. We demonstrate the use of machine learning using an example in materials science estimating continuum scale parameters by emulating, with uncertainties, complicated mesoscale physics. Additionally, we describe a new framework to emulate the fine scale physics, especially in the presence of microstructures, using machine learning, and showcase its usefulness by providing an example from modeling fracture propagation. Our approach can be thought of as a data-driven dimension reduction technique that yields probabilistic emulators. Our results show well-calibrated predictions for the quantities of interests in a low-strain simulation of fracture propagation at the mesoscale level. Furthermore, on average, we achieve ~10% relative errors on time-varying quantities like total damage and maximum stresses. Successfully replicating mesoscale scale physics within the continuum models is a crucial step towards predictive capability in multi-scale problems.

36 MATERIALS SCIENCE↗

Topology-enhanced mechanical stability of swelling nanoporous electrodes

Abstract Materials like silicon and germanium offer a 10-fold improvement in charge capacity over conventional graphite anodes in lithium-ion batteries but experience a roughly threefold volume increase during lithiation, which challenges ensuring battery integrity. Nanoporous silicon, created by liquid-metal-dealloying, is a potentially attractive anode design to mitigate this challenge, exhibiting both higher capacity and extended cycle lifetimes. However, how nanoporous structures accommodate the large volume change is unknown. Here, we address this question by using phase-field modeling to produce nanoporous particles and to investigate their elastoplastic swelling behavior and fracture. Our simulations show that enhanced mechanical stability results from the network topology consisting of ligaments connected by bulbous, sphere-like nodes. The ligaments forcefully resist elongation while the nodes, behaving like isolated spherical particles, experience large stresses driving fracture. However, being smaller compared to a sphere of the same volume as the entire nanoporous particle, the nodes are more protected against fracture.

36 MATERIALS SCIENCE↗

TOUGH-UDEC: A simulator for coupled multiphase fluid flows, heat transfers and discontinuous deformations in fractured porous media

A numerical simulator entitled TOUGH-UDEC is presented for the assessment of coupled thermal-hydraulic-mechanical processes in fractured porous media. Two existing well-established codes, TOUGH2 and UDEC, are coupled to model multiphase fluid flows, heat transfers, and discontinuous deformations in fractured porous media by means of discrete fracture representation. TOUGH2 is widely used for the modeling of heat transfers and multiphase multicomponent fluid flows, and UDEC is a well-known distinct element code for rock mechanics. The two codes are solved sequentially, with coupling parameters passed to each equation at specific intervals. After solving thermal-hydraulic equations within the TOUGH2 code, pressure and temperature information is imported into the UDEC model. Upon solving the mechanical equation within the UDEC code the calculated fracture apertures are converted to the equivalent permeability and porosity values for a TOUGH2 flow analysis. The solution is calculated by iteratively following an explicit sequence for numerical efficiency. Verifications are presented to demonstrate the capabilities of the coupled TOUGH-UDEC simulator. Three application examples of (1) shear dilation due to increased pore pressure, (2) thermal stress and (3) CO 2 injection, show that the new simulator can be an effective tool for geoengineering applications involving shear activation of fractures and faults.

54 ENVIRONMENTAL SCIENCES↗

Towards a unified nonlocal, peridynamics framework for the coarse-graining of molecular dynamics data with fractures

Molecular dynamics (MD) has served as a powerful tool for designing materials with reduced reliance on laboratory testing. However, the use of MD directly to treat the deformation and failure of materials at the mesoscale is still largely beyond reach. In this work, we propose a learning framework to extract a peridynamics model as a mesoscale continuum surrogate from MD simulated material fracture data sets. Firstly, we develop a novel coarse-graining method, to automatically handle the material fracture and its corresponding discontinuities in the MD displacement data sets. Inspired by the weighted essentially non-oscillatory (WENO) scheme, the key idea lies at an adaptive procedure to automatically choose the locally smoothest stencil, then reconstruct the coarse-grained material displacement field as the piecewise smooth solutions containing discontinuities. Then, based on the coarse-grained MD data, a two-phase optimization-based learning approach is proposed to infer the optimal peridynamics model with damage criterion. In the first phase, we identify the optimal nonlocal kernel function from the data sets without material damage to capture the material stiffness properties. Then, in the second phase, the material damage criterion is learnt as a smoothed step function from the data with fractures. As a result, a peridynamics surrogate is obtained. As a continuum model, our peridynamics surrogate model can be employed in further prediction tasks with different grid resolutions from training, and hence allows for substantial reductions in computational cost compared with MD. We illustrate the efficacy of the proposed approach with several numerical tests for the dynamic crack propagation problem in a single-layer graphene. Our tests show that the proposed data-driven model is robust and generalizable, in the sense that it is capable of modeling the initialization and growth of fractures under discretization and loading settings that are different from the ones used during training.

97 MATHEMATICS AND COMPUTING↗

Intergranular fracture in UO{sub 2}: derivation of traction-separation law from atomistic simulations

In this study, the intergranular fracture behavior of UO{sub 2} was studied by molecular dynamics simulations using the Basak potential. In addition, the constitutive traction-separation law was derived from atomistic data using the cohesive-zone model. In the simulations a bicrystal model with the (100) symmetric tilt Σ5 grain boundaries was utilized. Uniaxial tension along the grain boundary normal was applied to simulate Mode-I fracture. The fracture was observed to propagate along the grain boundary by micro-pore nucleation and coalescence, giving an overall intergranular fracture behavior. Phase transformations from the Fluorite to the Rutile and Scrutinyite phases were identified at the propagating crack tips. These new phases are metastable and they transformed back to the Fluorite phase at the wake of crack tips as the local stress concentration was relieved by complete cracking. Such transient behavior observed at atomistic scale was found to substantially increase the energy release rate for fracture. Insertion of Xe gas into the initial notch showed minor effect on the overall fracture behavior. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A machine-learning inverse model framework for rapid forecasting and history matching in unconventional reservoirs

Model-based optimization for real-time forecasting in unconventional reser-voirs requires novel methods and work?ows since the strategies and work?ows used in conventional reservoirs are either inapplicable, or prohibitively expen-sive and time-consuming. Insu?cient site data and computational expense of high-?delity simulations mean that work?ows with high-?delity simulations are not ideal for usage in comprehensive uncertainty quanti?cation stud-ies that require 1000s of forward model runs. We present an alternative, novel work?ow for unconventional reservoirs, based on the interplay between reduced-order models and machine-learning. Our physics-informed machine-learning (PIML) work?ow addresses the challenges to real-time reservoir management in uncoventionals, namely lack of data (the time-frame for which the wells have been producing), and computational expense of high-?delity modeling. We use the machine-learning paradigm of transfer-learning to bind together fast but less accurate reduced-order models with slow, but accurate high-?delity models and circumvent the di?culties inherent in the current state-of-the-art for unconventionals. Such a PIML work?ow, grounded in physics, is a viable candidate for real-time history matching and production forecasting in a fractured shale gas reservoir. The signi?cance of our approach is that while it is developed for a particu-lar well and site in the Marcelus Shale gas reservoir of the Appalachian basin (MSEEL), it is not wedded to it. We expect the same work?ow can be ap-plied to other shale formations (e.g., Woodford, Barnett, Utica, EagleFord) should site-data become available, using the same set of machine-learning techniques from transfer learning. Some ?ne-tuning (or minimal retraining of the neural networks) will be required to transfer knowledge across shale gas sites/formations but it is a clearly superior alternative to developing a new machine-learning model altogether when considering a di?erent site.

Srinivasan, Shriram↗

Fluid-driven fractures in granular media: Insights from numerical investigations

We investigate the mechanisms of opening-mode fracture initiation in granular media. The study is based on a simulation of grain-scale fluid-grain interactions through a coupled numerical approach in which the discrete element method is used to solve for the mechanics of a solid granular medium, and computational fluid dynamics is used to model fluid flow and drag forces. In this work, we present benchmark problems with analytical solutions and validate this numerical model against experiments on a viscous-drag-driven cavity in the literature. Additional simulation results show fracture initiation mechanisms in a random granular packing subjected to constant boundary stresses and to fluid injection with a localized source. The dimensionless variable $F_s/F_{sk}$ (ratio of seepage force $F_s$ and skeletal force $F_{sk}$) incorporates the impacts of physical properties and injection parameters including fluid viscosity, injection velocity, grain size, and effective stresses, and it has been used as a criterion separating regimes of fluid invasion and drag-driven fracture opening. Our simulation results show that $F_s/F_{sk}$ in combination with $τ_1$ (ratio of diffusion time from hydromechanical coupling and injection time) serves as a prediction of fracture opening within granular packing. We suggest a simple criterion ($F_s/F_{sk}$ > 1 or $τ_1$ > 0.17) that is valid for various types of granular media and injection conditions to determine if fracture opening will occur. Among other applications, this study is useful to predict the initiation and propagation of fractures in natural sediments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Numerical simulations of vertical growth of hydraulic fractures and brine migration in geological formations above the Marcellus shale

One of the critical environmental questions about hydraulic fracturing in shales is the potential for contamination of ground and surface water. There are two specific concerns arising from hydraulic treatments: 1) whether hydraulic fractures extend upward through overlying strata to reach overlying aquifers containing drinking water, and 2) whether injected fluids push native fluids upward into these overlying aquifers. In this work, the extent of likely fracture growth through overlying layers during hydraulic treatment of the Marcellus shale was estimated using a hydraulic fracture model. A wide range of material and fluid flow properties in a multi-layered geologic model was considered. The model was based on conditions and characteristics applicable to the Marcellus shale in that part of the Appalachian basin within southwestern Pennsylvania. Predictions of vertical termination frequencies for hydraulic fractures were used in a multi-layer model of the strata and natural fractures for studying brine migration through the natural and induced fracture network. NFFLOW, the software for explicitly modeling flow within networks of fractures, was utilized to compute transient flow rates according to the schedule of injected fluid during hydraulic fracturing. To aid our analysis, the modeled sequence of geologic strata was capped with a fictitious unfractured, but moderately-permeable layer, which serves as a monitoring zone. The analysis assumes one well lateral was placed in the middle of the Marcellus shale with hydraulic fractures penetrating layers in the model. The newly-developed geomechanical module within NFFLOW was used to represent stress-sensitivity of the fractures. This allows the opening and closing of fracture apertures with changes in fluid pressures within fracture segments. Pressure increases in the formations overlying the Tully limestone, indicating fluid flow, was observed due to the hydraulic stimulation; and the impact of these increased pressures on brine migration towards the surface was considered.

03 NATURAL GAS↗

An Innovative Technique for Evaluating the Integrity and Durability of Wind Turbine Blade Composites

Wind turbine blades are subjected to complex multiaxial stress states during operation. A review of the literature suggests that mixed mode fracture toughness can be significantly less than that of the tensile opening mode (Mode I), implying that fracture failure can occur at a much lower load capacity if the structure is subject to mixed-mode loading. Thus, it will be necessary to identify the mechanisms that might lead to failure in blade materials under mixed-mode loading conditions. Meanwhile, wind turbine blades are typically fabricated from fiber reinforced polymeric materials, e.g. fiber glass composites. Due to the large degree of anisotropy in mechanical properties that is usually associated with laminates, the fracture behavior of these composite materials is likely to be strongly dependent on the loading conditions. This may further strengthen the need to study the effect of mixed-mode loading on the integrity and durability of the wind turbine blade composites. To quantify the fracture behavior of composite structures under mixed mode loading conditions, particularly under combined Mode I (flexural or normal tensile stress) and Mode III (torsional shear stress) loading, a new testing technique is proposed based on the spiral notch torsion test (SNTT). As a 2002 R&D 100 Award winner, SNTT is a novel fracture testing technology. SNTT has many advantages over conventional fracture toughness methods and has been used to determine fracture toughness values on a wide spectrum of materials. The current project is the first attempt to utilize SNTT on polymeric and polymer-based composite materials. It is expected that mixed-mode failure mechanisms of wind turbine blades induced by typical in-service loading conditions, such as delamination, matrix cracking, fiber pull-out and fracture, can be effectively and economically investigated by using this methodology. This project consists of two phases. The Phase I (FY2010) effort includes (1) preparation of testing material and testing equipment set-up, including calibration of associated instruments/sensors, (2) development of design protocols for the proposed SNTT samples for both polymer and composite materials, such as sample geometries and fabrication techniques, (3) manufacture of SNTT samples, and (4) fracture toughness testing using the SNTT method. The major milestone achieved in Phase I is the understanding of fracture behaviors of polymeric matrix materials from testing numerous epoxy SNTT samples. Totals of 30 epoxy SNTT samples were fabricated from two types of epoxy materials provided by our industrial partners Gougeon Brothers, Inc. and Molded Fiber Glass Companies. These samples were tested with SNTT in three groups: (1) fracture due to monotonic loading, (2) fracture due to fatigue cyclic loading, and (3) monotonic loading applied to fatigue-precracked samples. Brittle fractures were observed on all tested samples, implying linear elastic fracture mechanics analysis can be effectively used to estimate the fracture toughness of these materials with confidence. Appropriate fatigue precracking protocols were established to achieve controllable crack growth using the SNTT approach under pure torsion loading. These fatigue protocols provide the significant insights of the mechanical behavior of epoxy polymeric materials and their associated rate-dependent characteristics. Effects of mixed-mode loading on the fracture behavior of epoxy materials was studied. It was found that all epoxy samples failed in brittle tensile failure mode; the fracture surfaces always follow a 45o spiral plane that corresponded to Mode I tensile failure, even when the initial pitch angle of the machined spiral grooves was not at 45o. In addition, general observation from the fatigue experiments implied that loading rate played an important role determining the fracture behavior of epoxy materials, such that a higher loading rate resulted in a shorter fatigue life. A detailed study of loading rate effect will be continued in the Phase II. On the other hand, analytical finite element analysis for fracture toughness evaluation is also an integral part of our research program. In the report period this analysis was also initiated. Preliminary progress has been achieved in building geometric models and designs with appropriate meshing protocols for epoxy polymeric samples. Based on the experience learned from the Phase I study, in FY2011 we will carry Phase II efforts to continue the finite element analysis to simulate the fracture process of both epoxy and composite materials. Experimental investigation will be focused on blade composite materials. The proposed SNTT composite samples are currently being jointly developed by ORNL team and Prof. John Mandell s group at Montana State University.

17 WIND ENERGY↗

An FFT-based micromechanical model for gradient enhanced brittle fracture

Damage models incorporated within FFT-based micromechanical methods have received much attention recently because of the need to better understand and predict brittle and ductile fracture. An important aspect of a damage model is non-local regularization, which removes the mesh dependence of the predictions that otherwise become physically unacceptable upon grid refinement. In this work, the Helmholtz-type equation for non-local gradient regularization of a damage model on a distorted grid is solved using an FFT-based approach. Further, the resulting system of equations is solved using the Jacobi iterative method. The model is applied to simulate brittle fracture of an intermetallic. The influence of the time and space discretization, the length-scale parameter, and intermetallic crystallographic orientation on crack evolution is studied.

36 MATERIALS SCIENCE↗

Process Modeling of U-10wt% Mo Alloys Using Integrated Computational Materials Engineering

Low-enriched uranium alloyed with 10 wt% molybdenum (U-10Mo) has been identified as a promising alternative to highly enriched uranium as fuel for the nation’s high-performance research reactors. Manufacturing the U-10Mo alloy consists of multiple complex thermomechanical processes, which is highly challenging for computational modeling. The integrated computational materials engineering (ICME) concept supports building a microstructure-based framework to investigate the effect of manufacturing processes on the material microstructure. In this report, an ICME model that combines homogenization, hot rolling, annealing, and cold rolling is presented as an example of implementing the ICME concept for modeling the manufacturing processes of the U-10Mo alloy. The integrated model enables information to be passed between the different model components, leading to an improved prediction and a better understanding of microstructure across multiple processes. The integrated model was also implemented to investigate the variation of chemical composition, thickness of the zirconium interlayer, grain growth, and carbide redistribution and fracture of U-10Mo during the thermomechanical processes. With the homogenization model, a molybdenum concentration map can be reconstructed from any given microstructure, and the homogenization time needed to reach a desired homogenization level can also be approximated. The microstructure-based finite-element rolling model, shows that the homogenization process reduces the nonuniformity in the thickness of the zirconium interlayers on the U-10Mo. With the output from the rolling model, a statistical analysis of second-phase hard particles was conducted to quantify the particle redistribution and interparticle spacing between carbides during the deformation. Also, new stringer identification criteria were proposed to predict the correlation between stringer volume fractions and hot-rolling reduction. A macro-finite-element method hot-rolling model showed that higher reduction passes can be achieved within the mill separation force range, and a new “aggressive” rolling schedule was proposed. The model also showed the importance of can material on the quality of rolled foils, with stronger can materials resulting in hot-rolled U-10Mo free of defects (waviness, dog-boning). The deformation-induced recrystallization model demonstrated capability to use inputs from deformation simulations of strain accumulation in U-10Mo samples to predict grain growth behavior of the fuel during thermal treatment stages. Finally, a plane-strain compression mode simulated particle fracture and calculates the void volume fraction generated during cold rolling. The macro-finite-element method cold-rolling model showed that smaller diameter rolls are necessary to achieve the desired foil thickness.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating the effect of internal aperture variability on transport in kilometer scale discrete fracture networks

The apertures of natural fractures in fractured rock are highly heterogeneous. However, in-fracture aperture variability is often neglected in flow and transport modeling and individual fractures are assumed to have uniform aperture distribution. The relative importance of in-fracture variability in flow and transport modeling within kilometer18 scale field–scale fracture networks has been under a matter of debate for a long time because the flow in each single fracture is controlled not only by in-fracture variability but also by boundary conditions. Computational limitations have previously prohibited researchers from investigating the relative importance of in-fracture variability in flow and transport modeling within large-scale fracture networks. We address this question by incorporating internal heterogeneity of individual fractures into 23 flow simulations within kilometer scale three-dimensional fracture networks, where fracture intensity, P32 (ratio between total fracture area and domain volume) is between 0.027 and 0.031 [1/m]. A recently developed discrete fracture network (DFN) simulation capability, dfnWorks, is used to generate DFNs that include in-fracture aperture variability represented by a stationary log-normal stochastic field with various correlation lengths and variances. The Lagrangian transport parameters, non-reacting travel time and cumulative retention, are calculated along particles streamlines. It is observed that due to local flow channeling early particle travel times are more sensitive to in-fracture variability than the tails of travel time distributions, where no significant effect of the in-fracture transmissivity variations and spatial correlation length is observed.

54 ENVIRONMENTAL SCIENCES↗

Pellet Cladding Mechanical Interaction Modeling Using the Extended Finite Element Method

As a brittle material, the ceramic UO2 used as light water reactor fuel experiences significant fracturing throughout its life, beginning with the first rise to power of fresh fuel. This has multiple effects on the thermal and mechanical response of the fuel/cladding system. One such effect that is particularly important is that when there is mechanical contact between the fuel and cladding, cracks that extending from the outer surface of the fuel into the volume of the fuel cause elevated stresses in the adjacent cladding, which can potentially lead to cladding failure. Modeling the thermal and mechanical response of the cladding in the vicinity of these surface-breaking cracks in the fuel can provide important insights into this behavior to help avoid operating conditions that could lead to cladding failure. Such modeling has traditionally been done in the context of finite-element-based fuel performance analysis by modifying the fuel mesh to introduce discrete cracks. While this approach is effective in capturing the important behavior at the fuel/cladding interface, there are multiple drawbacks to explicitly incorporating the cracks in the finite element mesh. Because the cracks are incorporated in the original mesh, the mesh must be modified for cracks of specified location and depth, so it is difficult to account for crack propagation and the formation of new cracks at other locations. The extended finite element method (XFEM) has emerged in recent years as a powerful method to represent arbitrary, evolving, discrete discontinuities within the context of the finite element method. Development work is underway by the authors to implement XFEM in the BISON fuel performance code, and this capability has previously been demonstrated in simulations of fracture propagation in ceramic nuclear fuel. These preliminary demonstrations have included only the fuel, and excluded the cladding for simplicity. This paper presents initial results of efforts to apply XFEM to model stress concentrations induced by fuel fractures at the fuel/cladding interface during pellet cladding mechanical interaction (PCMI). This is accomplished by enhancing the thermal and mechanical contact enforcement algorithms employed by BISON to permit their use in conjunction with XFEM. The results from this methodology are demonstrated to be equivalent to those from using meshed discrete cracks. While the results of the two methods are equivalent for the case of a stationary crack, it is demonstrated that XFEM provides the additional flexibility of allowing arbitrary crack initiation and propagation during the analysis, and minimizes model setup effort for cases with stationary cracks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement and simulation of heat exchange in fractured bedrock using inert and thermally degrading tracers

Multicomponent groundwater tracer tests were conducted in a well-characterized field site in Altona, NY using inert carbon-cored nanoparticles and a thermally degrading phenolic compound. Experiments were conducted in a mesoscale reservoir consisting of a single subhorizontal bedding plane fracture located 7.6 m below ground surface contained between two wells separated by 14.1 m. The reservoir rock, initially at 11.78C, was heated using 748C water. During the heating process, a series of tracer tests using thermally degrading tracers were used to characterize the progressive in situ heating of the fracture. Fiber-Optic Distributed Temperature Sensing (FODTS) was used to measure temperature rise orthogonal to the fracture surface at 10 locations. Recovery of the thermally degrading tracer’s product was increased as the reservoir was progressively heated indicating that the advancement of the thermal front was proportional to the mass fraction of the thermally degrading tracer recovered. Both GPR imaging and FODTS measurements reveal that flow was reduced to a narrow channel which directly connected the two wells and led to rapid thermal breakthrough. Computational modeling of inert tracer and heat transport in a two-dimensional discrete fracture demonstrate that subsurface characterization using inert tracers alone could not uniquely characterize the Altona field site. However, the inclusion of a thermally degrading tracer may permit accurate subsurface temperature monitoring. At the Altona field site, however, fluid-rock interactions appear to have increased reaction rates relative to laboratory-based measurements made in the absence of rock surfaces.

58 GEOSCIENCES↗