Search NASA⌕ Search

SEARCH · Search NASA

Results for “gap analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Theoretical analysis of two-gap superconductivity of magnesium diborades and iron pnictides in the generalized {alpha} model

A generalized {alpha} model for computing the superconducting parameters of real two-band superconductors is proposed based on an analysis of the properties of two-band equations in the theory of superconductivity. Using this model, we calculate the heat capacity and optical properties of Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2} superconducting compound and obtain the temperature dependences of the gaps and energies of the Leggett modes in the Mg{sub 1-x}Al{sub x}B{sub 2} superconducting system. Good quantitative coincidence of the calculated data and experimental results is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Potential Antiferromagnetic Fluctuations in Hole-Doped Iron-Pnictide Superconductor Ba1-xKxFe2As2 Studied by 75As Nuclear Magnetic Resonance Measurement0.1143/JPSJ.81.054704

We have performed 75As nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) measurements on single-crystalline Ba1-xKxFe2As2 for x = 0.27–1. 75As nuclear quadruple resonance frequency (νQ) increases linearly with increasing x. The Knight shift K in the normal state shows Pauli paramagnetic behavior with a weak temperature T dependence. K increases gradually with increasing x. By contrast, the nuclear spin–lattice relaxation rate 1/T1 in the normal state has a strong T dependence, which indicates the existence of large antiferomagnetic (AF) spin fluctuations for all x&#x27;s. The T dependence of 1/T1 shows a gaplike behavior below approximately 100 K for 0.6 < x < 0.9. This behaviors is well explained by the change in the band structure with the expansion of hole Fermi surfaces and the shrinkage and disappearance of electron Fermi surfaces at the Brillouin zone (BZ) with increasing x. The anisotropy of 1/T1, represented by the ratio of 1/T1ab to 1/T1c, is always larger than 1 for all x&#x27;s, which indicates that stripe-type AF fluctuations are dominant in this system. The K in the superconducting (SC) state decreases, which corresponds to the appearance of spin-singlet superconductivity. The T dependence of 1/T1 in the SC state indicates a multiple-SC-gap feature. A simple two-gap model analysis shows that the larger superconducting gap gradually decreases with increasing x from 0.27 to 1 and a smaller gap decreases rapidly and nearly vanishes for x > 0.6 where electron pockets in BZ disappear.

36 MATERIALS SCIENCE↗

Find the Gap: Black Hole Population Analysis with an Astrophysically Motivated Mass Function

We introduce a novel black hole mass function that realistically models the physics of pair-instability supernovae with a minimal number of parameters. Applying this to all events in the LIGO-Virgo Gravitational-Wave Transient Catalog 2 (GWTC-2), we detect a peak at M BHMG = 46$^{+17}_{-6}$ M ⊙ . Repeating the analysis without the black holes from the event GW190521, we find this feature at M BHMG =54± 6 M ⊙ . These results establish the edge of the anticipated "black hole mass gap" at a value compatible with the expectation from standard stellar structure theory. The mass gap manifests itself as a discontinuity in the mass function and is populated by a distinct, less-abundant population of higher-mass black holes. We find that the primary black hole population scales with power-law index -1.95 ± 0.51 (-1.97 ± 0.44) with (without) GW190521, consistent with models of star formation. Using Bayesian techniques, we establish that our mass function fits a new catalog of black hole masses approximately as well as pre-existing phenomenological mass functions. We also remark on the implications of these results for constraining or discovering new phenomena in nuclear and particle physics.

79 ASTRONOMY AND ASTROPHYSICS↗

Bridging the Gap on Data and Analysis for Distribution System Planning: Information That Utilities Can Provide Regulators, State Energy Offices and Other Stakeholders

Electric utilities conduct planning annually to ensure their distribution system meets technical standards, policies, and regulations; addresses forecasted grid conditions; satisfies customer needs; and advances utility priorities. The plan identifies grid deficiencies, analyzes potential solutions, and prioritizes capital investments and other expenditures. About 20 U.S. states and jurisdictions require regulated utilities to file some type of distribution system plan with the public utility commission for review. Requirements for sharing distribution system data and analyses vary widely, from few specific requirements to a detailed list of information that must be provided. While utilities conduct extensive analysis to develop distribution system plans, in most jurisdictions regulators and stakeholders do not know what data are available and how the utility uses the data in planning and investing. This report aims to bridge the gap by increasing understanding of the types of data and analyses utilities employ to develop distribution system plans and how the information affects their decision-making. The report describes information that states and stakeholders can ask for related to 11 data categories: -Forecasting loads and distributed energy resources (DERs) -Scenario analysis -Worst-performing circuits -Asset management strategy -Hosting capacity analysis -Value of DERs -Grid needs assessment -Cost-effectiveness framework for investments -Distribution system investment strategy and implementation -Geotargeted programs -Non-wires alternatives procurements.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Design of a loop-gap resonator with bimodal uniform fields using finite element analysis

The loop-gap resonator (LGR) was originally developed to provide a uniform microwave magnetic field on a sample for electron spin resonance (ESR) experiments. The LGR is composed of one or more loops and gaps acting as inductances and capacitances respectively. Typical LGR designs produce a uniform field on a sample at a single resonant frequency, but for certain experiments it is necessary to study the response of a material to uniform fields at multiple frequencies applied simultaneously. In this study we develop an empirical design procedure using finite element method calculations to design an asymmetric loop-gap resonator with uniform fields at two frequencies in the same sample volume and analyze the field uniformity, frequency tunability and filling factors, providing comparison to a manufactured device.

Computational electromagnetics↗

A Spatial-Temporal Analysis of Travel Time Gap and Inequality between Public Transportation and Personal Vehicles

The increased use of personal vehicles presents environmental challenges, prompting the exploration of public transportation as an affordable, eco-friendly alternative. However, obstacles like fixed schedules, limited routes, and extended travel times impede widespread adoption. This study investigates the temporal evolution of spatial inequality in the travel time gap between public transportation and personal vehicles, reflecting disparities across states and time periods. Analyzing Census Transportation Planning Program data for six northeastern states in 2010 and 2016 reveals no significant increase in the travel time gap, but notable growth in inequality in a few urban and disadvantaged communities. Comprehending these trends is vital for fostering equitable advancements in transportation infrastructure and enhancing public transportation competitiveness.

Pan, Melrose↗

Analysis of photonic band gap in dispersive properties of tunable three-dimensional photonic crystals doped by magnetized plasma

In this paper, the magnetooptical effects in dispersive properties for two types of three-dimensional magnetized plasma photonic crystals (MPPCs) containing homogeneous dielectric and magnetized plasma with diamond lattices are theoretically investigated for electromagnetic (EM) wave based on plane wave expansion (PWE) method, as incidence EM wave vector is parallel to the external magnetic field. The equations for two types of MPPCs with diamond lattices (dielectric spheres immersed in magnetized plasma background or vice versa) are theoretically deduced. The influences of dielectric constant, plasma collision frequency, filling factor, the external magnetic field, and plasma frequency on the dispersive properties for both types of structures are studied in detail, respectively, and some corresponding physical explanations are also given. From the numerical results, it has been shown that the photonic band gaps (PBGs) for both types of MPPCs can be manipulated by plasma frequency, filling factor, the external magnetic field, and the relative dielectric constant of dielectric, respectively. Especially, the external magnetic field can enlarge the PBG for type-2 structure (plasma spheres immersed in dielectric background). However, the plasma collision frequency has no effect on the dispersive properties of two types of three-dimensional MPPCs. The locations of flatbands regions for both types of structures cannot be tuned by any parameters except for plasma frequency and the external magnetic field. The analytical results may be informative and of technical use to design the MPPCs devices.

36 MATERIALS SCIENCE↗

Analysis of the Band Gap Type Dataset

This report summarizes the work done as part of the MINDES: Data Mining for Inverse Design project to mine the datasets generated by the Center for Inverse Design, an Energy Frontier Research Center (EFRC) of the Office of Science, US Department of Energy. In the course of the MINDES project, two datasets were analyzed, one on the formation enthalpy of spinels, and the other on the band gap type of the class of ternary compounds generated at NREL; the latter is the focus of this report.

97 MATHEMATICS AND COMPUTING↗

FY-16 Technology Gap Study Technical Report: Analysis of Undissolved Anode Materials of Mark-IV Electrorefiner

The Experimental Breeder Reactor II (EBR-II) is a sodium cooled fast reactor developed at Argonne National Laboratory (ANL). The used fuels from the EBR-II are currently being treated in the Fuel Conditioning Facility (FCF) at the Idaho National Laboratory (INL). The Mark IV (Mk-IV) electrorefiner (ER) is a unit process in the FCF, which is primarily assigned to treating the used driver fuels. The stainless steel anode baskets hold the chopped spent driver fuel segments. During electrorefining, the anode baskets are immersed into the electrolyte and the used fuel is dissolved electrochemically. Perforated sides and bottoms allow the flow of the electrolyte into and out of the anode baskets. The steel cathode is also immersed into the electrolyte and collects the reduced products. The active metal contents in the used fuel (e.g., Cs, Sr, lanthanides, Pu, etc.) reacts with uranium cations in the electrolyte and progressively reports to the electrolyte. Noble metals are mostly retained in the cladding hulls. Varying quantities of zirconium are retained in the cladding hulls depending on the operational conditions of the Mk-IV ER. The undissolved anode materials are removed from the anode baskets and stored for subsequent metal waste form processing. These undissolved materials typically include undissolved fuels, stainless steel cladding, and adhering electrolyte. A couple of hulls are retrieved for chemical analysis and used for estimating the composition of the entire undissolved anode materials. The mass balance attempt based on this practice of estimating the undissolved anode materials has been a challenge due to inherently high sampling errors associated with heterogeneous undissolved material compositions. Responding to the prescribed challenge, this report investigates chemical analysis data as a whole and finds noticeable trends in the compositions of undissolved anode material samples with respect to the mass of the whole undissolved anode materials. Based upon this discovery, an empirical model is proposed.

36 MATERIALS SCIENCE↗

Analysis on the Preliminary Gap Conductance Test with Single Primary Heat Extraction and Removal Emulator

Microreactor is a type of nuclear reactor that is intended to produce thermal energy from the micro and integrated design. Among various microreactor roadmaps, microreactor with heat pipes is one of the promising designs that under active development. At Idaho National Laboratory (INL) and supported by the Department of Energy (DOE) Microreactor Program (MRP), a Single Primary Heat Extraction and Removal Emulator (SPHERE) was developed. The main purpose of SPHRE is to understand thermal performance of heat pipe in the conjunction of heat source without using nuclear material. The heat pipe used in the SPHERE has sodium as a working fluid, with Argon gas in the vapor region, thus this heat pipe is variable conductance heat pipe (VCHP). The volume of non-condensable gas changes with power and elapsed time, so the area covered by non-condensable gas changes. This gives an effect that passively controls the cooling capability of condenser section. This preliminary experiment was intended to perform a gap conductance experiment that reveals heat transfer characteristics of gas at the gap around the heat pipe. However, there are not many experimental data that deals with heat transfer of the gas at the gap around heat pipe. In this research, the preliminary experimental result regarding to the heat pipe performance with different composition of gas at the gap, level of power is presented. The experimental data will be used for the validation study of SOCKEYE as a future plan.

42 ENGINEERING↗

NRC Technical Research Program to Evaluate Extended Storage and Transportation of Spent Nuclear Fuel - 12547

Any new direction proposed for the back-end of spent nuclear fuel (SNF) cycle will require storage of SNF beyond the current licensing periods. The Nuclear Regulatory Commission (NRC) has established a technical research program to determine if any changes in the 10 CFR part 71, and 72 requirements, and associated guidance might be necessary to regulate the safety of anticipated extended storage, and subsequent transport of SNF. This three part program of: 1) analysis of knowledge gaps in the potential degradation of materials, 2) short-term research and modeling, and 3) long-term demonstration of systems, will allow the NRC to make informed regulatory changes, and determine when and if additional monitoring and inspection of the systems is necessary. The NRC has started a research program to obtain data necessary to determine if the current regulatory guidance is sufficient if interim dry storage has to be extended beyond the currently approved licensing periods. The three-phased approach consists of: - the identification and prioritization of potential degradation of the components related to the safe operation of a dry cask storage system, - short-term research to determine if the initial analysis was correct, and - a long-term prototypic demonstration project to confirm the models and results obtained in the short-term research. The gap analysis has identified issues with the SCC of the stainless steel canisters, and SNF behavior. Issues impacting the SNF and canister internal performance such as high and low temperature distributions, and drying have also been identified. Research to evaluate these issues is underway. Evaluations have been conducted to determine the relative values that various types of long-term demonstration projects might provide. These projects or follow-on work is expected to continue over the next five years. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Morphology, electrical, and optical properties of heavily doped ZnTe:Cu thin films

We report on a study of the physical properties of ZnTe:Cu films with Cu content up to ∼12 at. % prepared using rf magnetron sputtering. The composition and lateral homogeneities are studied using X-ray photoelectron spectroscopy (XPS). Atomic force microscopy measurements on films deposited at different substrate temperatures (up to 325 °C) yielded activation energy of 12 kJ/mole for the grains growth. The results of XPS and electrical and optical measurements provide evidence for the formation of the ternary zinc copper telluride alloy in films containing Cu concentration above ∼4 at. %. The XPS results suggest that copper is incorporated in the alloy with oxidation state Cu{sup 1+} so that the alloy formula can be written Zn{sub 1−y}Cu{sub y} Te with y = 2−x, where x is a parameter measuring the stoichiometry in the Cu site. The formation of this alloy causes appreciable shift in the binding energies of the XPS peaks besides an IR shift in the energy band gap. Detailed analysis of the optical absorption data revealed the presence of two additional transitions, besides the band gap one, originating from the Γ{sub 8} and Γ{sub 7} (spin-orbit) valence bands to a donor level at ∼0.34 eV below the Γ{sub 6} conduction band. This interpretation yields a value for the valence band splitting energy Δ≅ 0.87 eV independent of copper concentration. On the other hand, the mechanism of formation of the alloy is tentatively explained in terms of a point defect reaction in which substitutional Cu defect Cu{sub Zn} is also created. Assuming that substitutional Cu is the dominant acceptor in the Zn rich alloy as in ZnTe, its formation energy was determined to be 1.7 eV close to the theoretical value (1.41 eV) in ZnTe.

36 MATERIALS SCIENCE↗

Fuel Swelling and Creep Analysis for a MURR LEU U-10Mo Monolithic Plate

In this work, finite element analysis (FEA) is used to model and simulate the thermo-mechanical behavior of a selected LEU MURR fuel plate under typical irradiation conditions of the proposed LEU MURR core. The proposed LEU fuel element for MURR conversion has 23 curved fuel plates. The fuel element design and analysis are described in Reference [7]. The safety analysis for calculating the margin to flow instability that had elements with a mixture of burnups, which is typical for MURR operations. In addition to the application of engineering hot channel factors to account for variations in the fuel element manufacturing that could affect the coolant channel gaps, the analysis assumed a constriction of the coolant channel gaps due to an increase in the fuel plate thicknesses during the element lifetime. Estimates of the local plate thickness increase at end-of-life (EOL) due to fuel swelling and creep were developed from experimental data presented in References [8] and [9]. The maximum local plate thickness increase from that analysis was calculated for fuel plate 23 in an EOL element. Furthermore, the minimum margin to flow instability for the reference LEU cores was calculated to occur in coolant channel 23 of an EOL element, which is the coolant channel between plates 22 and 23. Therefore,the work performed here evaluated plate 23 only, as this was found to be the most limiting plate.

Mohamed, Walid↗

A review of the remote sensing of lower tropospheric thermodynamic profiles and its indispensable role for the understanding and the simulation of water and energy cycles: REMOTE SENSING OF THERMODYNAMIC PROFILES

A review of remote sensing technology for lower tropospheric thermodynamic (TD) profiling is presented with focus on high accuracy and high temporal-vertical resolution. The contributions of these instruments to the understanding of the Earth system are assessed with respect to radiative transfer, land surface-atmosphere feedback, convection initiation, and data assimilation. We demonstrate that for progress in weather and climate research, TD profilers are essential. These observational systems must resolve gradients of humidity and temperature in the stable or unstable atmospheric surface layer close to the ground, in the mixed layer, in the interfacial layer—usually characterized by an inversion—and the lower troposphere. A thorough analysis of the current observing systems is performed revealing significant gaps that must be addressed to fulfill existing needs. We analyze whether current and future passive and active remote sensing systems can close these gaps. A methodological analysis and demonstration of measurement capabilities with respect to bias and precision is executed both for passive and active remote sensing including passive infrared and microwave spectroscopy, the global navigation satellite system, as well as water vapor and temperature Raman lidar and water vapor differential absorption lidar. Whereas passive remote sensing systems are already mature with respect to operational applications, active remote sensing systems require further engineering to become operational in networks. However, active remote sensing systems provide a smaller bias as well as higher temporal and vertical resolutions. For a suitable mesoscale network design, TD profiler system developments should be intensified and dedicated observing system simulation experiments should be performed.

58 GEOSCIENCES↗

Design and implementation of a data analysis pipeline for paper spray ionization mass spectrometry of UO 2 Cl 2

Ambient mass spectrometry is an emerging characterization method for nuclear materials analysis. SRNL has recently acquired a new JEOL AccuTOF™-DART® LP 4G with a Filter Spray™ front end sample injection system, to develop new methods for ambient mass spectrometry of uranium analytes. Preliminary measurements of uranium-containing samples have demonstrated a need to rapidly evaluate large datasets generated with tailored data analysis scripts. To address this gap a data analysis pipeline written in R within the R Studio environment has been developed. The pipeline comprises a series of processing steps where the data are ingested, analyte peaks of interest are extracted, subsequent ratio and normalization calculations are performed, and results are presented in a series of graphical plots. In detail, the data files containing up to several hundred chronological spectra of a single sample in netCDF format were first extracted into RStudio. Then, initial 3D plots of the data were created in respect to the time, intensity, and mass to charge domains. These graphics serve as an initial easily visualized survey of instrument data. Next, a .csv format file containing the names, masses, and abundances of isotopes of interest were ingested into RStudio and were used to automatically collect intensity values at the mass value. Uranium isotope ratios were plotted against gadolinium isotope ratios (gadolinium was used as an internal standard) and assessed for ion beam stability and intensity. The spectra were filtered by applying a threshold intensity for the 158GdO+ mass channel. A Monte Carlo experiment was performed by creating a theoretical distribution of the data in order to determine the ratio of the uranium isotopes. The results show that the developed data analysis pipeline successfully filters high quality data from overall poor quality runs. Our results also support the idea that paper spray ionization mass spectrometry can be used for both detection and quantification of trace amounts of uranium compounds.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Regulations, Codes, and Standards (RCS) for Large-Scale Hydrogen Systems

Hydrogen has potential applications that require larger-scale storage, use, and handling systems than currently are employed in emerging-market fuel cell applications. These potential applications include hydrogen generation and storage systems that would support electrical grid systems. There has been extensive work evaluating regulations, codes, and standards (RCS) for the emerging fuel cell market, such as the infrastructure required to support fuel cell electric vehicles. However, there has not been a similar RCS evaluation and development process for these larger systems. This paper presents an evaluation of the existing RCS in the United States for large-scale systems and identifies potential RCS gaps. This analysis considers large-scale hydrogen technologies that are currently being employed in limited use but may be more widely used as large-scale applications expand. The paper also identifies areas of potential safety research that would need to be conducted to fill the RCS gaps. U.S. codes define bulk hydrogen storage systems but do not define large-scale systems. This paper evaluates potential applications to define a large-scale hydrogen system relative to the systems employed in emerging technologies such as hydrogen fuelling stations. These large-scale systems would likely be of similar size to or larger than industrial hydrogen systems.

08 HYDROGEN↗