Search NASA⌕ Search

SEARCH · Search NASA

Results for “gravity field mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Topography of the Moon from the Clementine Lidar

Range measurements from the lidar instrument carried aboard the Clementine spacecraft have been used to produce an accurate global topographic model of the Moon. This paper discusses the function of the lidar; the acquisition, processing, and filtering of observations to produce a global topographic model; and the determination of parameters that define the fundamental shape of the Moon. Our topographic model: a 72nd degree and order spherical harmonic expansion of lunar radii, is designated Goddard Lunar Topography Model 2 (GLTM 2). This topographic field has an absolute vertical accuracy of approximately 100 m and a spatial resolution of 2.5 deg. The field shows that the Moon can be described as a sphere with maximum positive and negative deviations of approx. 8 km, both occurring on the farside, in the areas of the Korolev and South Pole-Aitken (S.P.-Aitken) basins. The amplitude spectrum of the topography shows more power at longer wavelengths as compared to previous models, owing to more complete sampling of the surface, particularly the farside. A comparison of elevations derived from the Clementine lidar to control point elevations from the Apollo laser altimeters indicates that measured relative topographic heights generally agree to within approx. 200 in over the maria. While the major axis of the lunar gravity field is aligned in the Earth-Moon direction, the major axis of topography is displaced from this line by approximately 10 deg to the cast and intersects the farside 24 deg north of the equator. The magnitude of impact basin topography is greater than the lunar flattening (approx. 2 km) and equatorial ellipticity (approx. 800 m), which imposes a significant challenge to interpreting the lunar figure. The floors of mare basins are shown to lie close to an equipotential surface, while the floors of unflooded large basins, except for S.P.-Aitken, lie above this equipotential. The radii of basin floors are thus consistent with a hydrostatic mechanism for the absence of significant farside maria except for S.P.-Aitken, whose depth and lack of mare require significant internal compositional and/or thermal heterogeneity. A macroscale surface roughness map shows that roughness at length scales of 10(exp 1) - 10(exp 2) km correlates with elevation and surface age.

Smith, David E.↗
NASA NTRS2001

Precise Orbit Determination for GEOSAT Follow-On Using Satellite Laser Ranging Data and Intermission Altimeter Crossovers

The US Navy's GEOSAT Follow-On Spacecraft was launched on February 10, 1998 with the primary objective of the mission to map the oceans using a radar altimeter. Following an extensive set of calibration campaigns in 1999 and 2000, the US Navy formally accepted delivery of the satellite on November 29, 2000. Satellite laser ranging (SLR) and Doppler (Tranet-style) beacons track the spacecraft. Although limited amounts of GPS data were obtained, the primary mode of tracking remains satellite laser ranging. The GFO altimeter measurements are highly precise, with orbit error the largest component in the error budget. We have tuned the non-conservative force model for GFO and the gravity model using SLR, Doppler and altimeter crossover data sampled over one year. Gravity covariance projections to 70x70 show the radial orbit error on GEOSAT was reduced from 2.6 cm in EGM96 to 1.3 cm with the addition of SLR, GFO/GFO and TOPEX/GFO crossover data. Evaluation of the gravity fields using SLR and crossover data support the covariance projections and also show a dramatic reduction in geographically-correlated error for the tuned fields. In this paper, we report on progress in orbit determination for GFO using GFO/GFO and TOPEX/GFO altimeter crossovers. We will discuss improvements in satellite force modeling and orbit determination strategy, which allows reduction in GFO radial orbit error from 10-15 cm to better than 5 cm.

Lemoine, Frank G.↗
NASA NTRS1992

Numerical Study of Mixing of Two Fluids Under Low Gravity

The mixing characteristics of two fluids inside a cavity due to buoyancy driven flow fields for low gravity conditions is investigated via numerical experiments. The buoyancy driven flow, depending on the parametric region, stretches and deforms the material interface into a wave morphological pattern. The morphological pattern affects the resulting stratification thickness of the mixed region. Three basic mixing regimes occur: convective, diffusive, and chaotic. In the convective regime, an overturning motion occurs which gives rise to a stable wave formation. This wave oscillates and its decay leads to a stable stratification. Whereas, in the diffusive regime, the length of the interface remains constant while mixing occurs. This limiting behavior is very important to materials processing in space, and it admits a closed form solution corresponding to vanishing convective terms which agrees with computational results. Finally, in the chaotic regime, the material interface continuously stretches and folds on itself similar to a horseshoe map. The length of stretch of the interface increases exponentially. Internal wavebreaking occurs for this case. This wavebreaking generates local turbulence, and provides an effective mechanism for mixing.

Duval, Walter M. B.↗
DOE OSTI2025

Dissipation in open holography

We exploit the holographic realization of a conformal theory coupled to an external bath realized via a double trace deformation and its gravity dual in terms of transparent boundary conditions in order to map out some basic dissipative properties of this simple open holographic system. In particular, we determine the energy transmission coefficient across the boundary, discover a novel duality relating weak and strong coupling to the external bath, and quantify the dissipation in the system by working out the quasi normal modes.

AdS-CFT correspondence↗
NASA NTRS1986

Magsat equivalent source anomalies over the southeastern United States - Implications for crustal magnetization

The Magsat crustal anomaly field depicts a previously-unidentified long-wavelength negative anomaly centered over southeastern Georgia. Examination of Magsat ascending and descending passes clearly identifies the anomalous region, despite the high-frequency noise present in the data. Using ancillary seismic, electrical conductivity, Bouguer gravity, and aeromagnetic data, a preliminary model of crustal magnetization for the southern Appalachian region is presented. A lower crust characterized by a pervasive negative magnetization contrast extends from the New York-Alabama lineament southeast to the Fall Line. In southern Georgia and eastern Alabama (coincident with the Brunswick Terrane), the model calls for lower crustal magnetization contrast of -2.4 A/m; northern Georgia and the Carolinas are modeled with contrasts of -1.5 A/m. Large-scale blocks in the upper crust which correspond to the Blue Ridge, Charlotte belt, and Carolina Slate belt, are modeled with magnetization contrasts of -1.2 A/m, 1.2 A/m, and 1.2 A/m respectively. The model accurately reproduces the amplitude of the observed low in the equivalent source Magsat anomaly field calculated at 325 km altitude and is spatially consistent with the 400 km lowpass-filtered aeromagnetic map of the region.

Ruder, M. E.↗
NASA NTRS2001

Global Bathymetric Prediction For Ocean Modeling and Marine Geophysics

We proposed to construct a complete bathymetric map of the oceans at a 3-10 km resolution by combining all of the available depth soundings collected over the past 30 years with high resolution marine gravity information provided by the Geosat, ERS-1/2, and Topex/Poseidon altimeters. Detailed bathymetry is essential for understanding physical oceanography and marine geophysics. Currents and tides are controlled by the overall shapes of the ocean basins as well as the smaller sharp ocean ridges and seamounts. Because erosion rates are low in the deep oceans, detailed bathymetry reveals the mantle convection patterns, the plate boundaries, the cooling/subsidence of the oceanic lithosphere, the oceanic plateaus, and the distribution of off-ridge volcanoes. We proposed to: (1) Accumulate all available depth soundings collected over the past 30 years; (2) Use the short wavelength (< 160 km) satellite gravity information to interpolate between sparse ship soundings; (3) Improve the resolution of the marine gravity field using enhanced estimates along repeat altimeter profiles together with the dense altimeter measurements; (4) Refine/improve bathymetric predictions using the improved resolution gravity field and also by investigating computer-intensive methods for bathymetric prediction such as inverse theory; and (5) Produce a 'Globe of the Earth' similar to the globe of Venus prepared by the NASA Magellan investigation. This will also include the best available digital land data.

Sandwell, David T.↗
NASA NTRS1995

Spectral analyses, climatology, and interannual variability of Nimbus-7 TOMS version 6 total column ozone

This reference publication presents selected results from space-time spectral analyses of 13 years of version 6 daily global ozone fields from the Total Ozone Mapping Spectrometer (TOMS). One purpose is to illustrate more quantitatively the well-known richness of structure and variation in total ozone. A second purpose is to provide, for use by modelers and for comparison with other analysts' work, quantitative measures of zonal waves 1, 2, 3, and medium-scale waves 4-7 in total ozone. Their variations throughout the year and at a variety of latitudes are presented, from equatorial to polar regions. The 13-year averages are given, along with selected individual years which illustrate year-to-year variability. The largest long wave amplitudes occur in the polar winters and early springs of each hemisphere, and are related to strong wave amplification during major warning events. In low attitudes total ozone wave amplitudes are an order of magnitude smaller than at high latitudes. However, TOMS fields contain a number of equatorial dynamical features, including Rossby-gravity and Kelvin waves.

Stanford, J. L.↗
NASA NTRS2000

Orbit Operations at 433 Eros: Navigation for the NEAR Shoemaker Mission

NASA's Near Earth Asteroid Rendezvous Mission began its record-setting exploration of the asteroid 433 Eros by inserting the spacecraft into orbit about Eros on February 14, 2000. This is the first spacecraft from any country to orbit an asteroid. The mission has overcome a failed insertion burn attempt on December 20, 1998, an event that would have ended most planetary missions, to return to the same target and successfully begin its science mapping a little more than a year later. Shortly after the successful insertion into orbit, the mission was renamed NEAR Shoemaker (NEAR) in memory of the late astronomer and geologist Eugene Shoemaker. NEAR will gather science data at Eros until February 14, 2001, which is the nominal end of mission. The NEAR mission is managed by the Johns Hopkins University, Applied Physics Laboratory in Laurel, Maryland. Since the initial mission concept in 1992, the design and implementation of the NEAR navigation system have been the responsibility of the Jet Propulsion Laboratory, California Institute of Technology. This presentation will show some of the unique features of navigation and mission design related to orbiting an asteroid and to designing a robust navigation system for the NEAR spacecraft. The problem of navigating a spacecraft about an asteroid is made difficult by the relative uncertainty in the asteroid physical properties which perturb the orbit: i.e., the mass, gravity field, and spin state. To help solve this problem, the navigation system for NEAR uses traditional DSN radio metric Doppler and range tracking, along with new technologies of optical landmark tracking and laser ranging to the asteroid surface. The experiences to date for each of these data types in the navigation solutions will be presented. Plans for the remainder of the NEAR mission will be presented, which include low orbits (down to 35 km radius circular orbits), and close flybys that may pass within 1 km of the surface. In addition, at the end of mission, NASA has approved a controlled descent and hovering phase that will culminate with the spacecraft impacting the surface. The maneuver planning for this final phase will also be presented.

Williams, B. G.↗
NASA NTRS1996

Soot Imaging and Measurement

Soot, sometimes referred to as smoke, is made up primarily of the carbon particles generated by most combustion processes. For example, large quantities of soot can be seen issuing from the exhaust pipes of diesel-powered vehicles. Heated soot also is responsible for the warm orange color of candle flames, though that soot is generally consumed before it can exit the flame. Research has suggested that heavy atmospheric soot concentrations aggravate conditions such as pneumonia and asthma, causing many deaths each year. To understand the formation and oxidation of soot, NASA Lewis Research Center scientists, together with several university investigators, are investigating the properties of soot generated in reduced gravity, where the absence of buoyancy allows more time for the particles to grow. The increased time allows researchers to better study the life cycle of these particles, with the hope that increased understanding will lead to better control strategies. To quantify the amount of soot present in a flame, Lewis scientists developed a unique imaging technique that provides quantitative and qualitative soot data over a large field of view. There is significant improvement over the single-point methods normally used. The technique is shown in the sketch, where light from a laser is expanded with a microscope objective, rendered parallel, and passed through a flame where soot particles reduce the amount of light transmitted to the camera. A filter only allows light at the wavelength of the laser to pass to the camera, preventing any extraneous signals. When images of the laser light with and without the flame are compared, a quantitative map of the soot concentration is produced. In addition to that data, a qualitative image of the soot in the flame is also generated, an example of which is displayed in the photo. This technique has the potential to be adapted to real-time process control in industrial powerplants.

Source record↗
NASA NTRS1973

Identification of Geostructures of continental crust, particularly as they relate to mineral-resource evaluation

The author has identified the following significant results. Analysis of lineated lakes in the Umiat, Alaska area and comparison with known geology, gravity, and magnetic data in the the area suggest concealed structures exist at depth, possibly at or near basement, which may represent targets for petroleum exploration. Compilation of reconnaissance geologic data on 1:250,000 scale enlargements of ERTS-1 images near Corwin reveal structural and stratigraphic anomalies that suggest the Cretaceous sequence is less thick than supposed and is repeated in a series of plates superimposed by flat thrust faults. The structural style differs from that in coeval strata to the northeast, across the northwest-trending linear zone separating differing tectonic styles in older strata noted earlier. The regional extension of a fault known locally in the McCarthy area has been recognized; this fault appears to form the boundary of a significant terrane of mid-Paleozoic metamorphic rocks. ERTS-1 images are being used operationally, at 1:1,000,000 scale in the compilation of regional geologic maps, and at 1:250,000 scale in field mapping in the Brooks Range, in the study of faults in seismically active southern Alaska, in field-checking interpretations previously made from ERTS-1 imagery, and orthophoto base maps for geologic maps.

Gryc, G.↗
NASA NTRS2012

GRAIL Refinements to Lunar Seismic Structure

The present ]day internal structure of the Moon provides insight not only into its own formation and evolution, but also that of all rocky planetary bodies. The most direct way to probe a planet fs interior structure is through seismology. As part of the Apollo lunar missions, four seismometers were deployed on the nearside surface of the Moon between the years 1969 and 1972. These instruments operated continuously until 1977, forming the only substantial extraterrestrial seismic data set in existence. These data have been used to constrain various aspects of the seismic velocity and density structure of the Moon. Typical 1-D models recognize a 30-60 km thick crust overlying a nearly constant ]velocity mantle, and extend to a depth of approximately 1000 km, below which the lack of penetrating moonquake ray ]paths precludes the seismic determination of deeper structure. Previously, the lack of observed moonquakes from the far side of the Moon has been used to infer the presence of a highly attenuating (possibly molten) core. Indirect geophysical measurements such as moment of inertia, magnetic induction, lunar laser ranging, and elemental abundances of mare basalts also place varying constraints on core size and state. In combination with seismic studies, these indirect measurements have been used to arrive at a commonly accepted model of the Moon's deepest interior that includes a solid inner and fluid outer core, overlain by a partial melt boundary layer. We recently applied modern array seismology techniques to the Apollo data and revealed detailed core structure, including the first direct confirmation of the presence of a solid inner core. Our study focused on the identification of core ]reflected phases in deep moonquake seismograms. The resulting model of the Moon fs innermost structure was found to be consistent with the commonly accepted model. However, the modeled layer radii may vary by tens of kilometers, as is expected when accounting for uncertainties such as moonquake location, timing errors, and potential seismic heterogeneities. In addition, the modeled velocities may vary with a 1-to-1 trade ]off with the modeled reflector depth. The GRAIL (Gravity Recovery and Interior Laboratory) mission, launched in Sept. 2011, placed two nearly identical spacecraft in lunar orbit. The two satellites make extremely high-resolution measurements of the lunar gravity field, which can be used to constrain the interior structure of the Moon using a "crust to core" approach. GRAIL fs constraints on crustal thickness, mantle structure, core radius and stratification, and core state (solid vs. molten) will complement seismic investigations in several ways. Here we present a progress report on our efforts to advance our knowledge of the Moon fs internal structure using joint gravity and seismic analyses. We will focus on methodology, including 1) refinements to the seismic core constraint accomplished through array processing of Apollo seismic data, made by applying a set of travel time corrections based on GRAIL structure estimates local to each Apollo seismic station; 2) modeling deep lunar structure through synthetic seismograms, to test whether the seismic core model can reproduce the core reflections observed in the Apollo seismograms; and 3) a joint seismic and gravity inversion in which we attempt to fit a family of seismic structure models with the gravity constraints from GRAIL, resulting in maps of seismic velocities and densities that vary from a nominal model both laterally and with depth.

Weber, Renee↗
NASA NTRS2003

Neural Development Under Conditions of Spaceflight

One of the key tasks the developing brain must learn is how to navigate within the environment. This skill depends on the brain's ability to establish memories of places and things in the environment so that it can form cognitive maps. Earth's gravity defines the plane of orientation of the spatial environment in which animals navigate, and cognitive maps are based on this plane of orientation. Given that experience during early development plays a key role in the development of other aspects of brain function, experience in a gravitational environment is likely to be essential for the proper organization of brain regions mediating learning and memory of spatial information. Since the hippocampus is the brain region responsible for cognitive mapping abilities, this study evaluated the development of hippocampal structure and function in rats that spent part of their early development in microgravity. Litters of male and female Sprague-Dawley rats were launched into space aboard the Space Shuttle Columbia on either postnatal day eight (P8) or 14 (P14) and remained in space for 16 days. Upon return to Earth, the rats were tested for their ability to remember spatial information and navigate using a variety of tests (the Morris water maze, a modified radial arm maze, and an open field apparatus). These rats were then tested physiologically to determine whether they exhibited normal synaptic plasticity in the hippocampus. In a separate group of rats (flight and controls), the hippocampus was analyzed using anatomical, molecular biological, and biochemical techniques immediately postlanding. There were remarkably few differences between the flight groups and their Earth-bound controls in either the navigation and spatial memory tasks or activity-induced synaptic plasticity. Microscopic and immunocytochemical analyses of the brain also did not reveal differences between flight animals and ground-based controls. These data suggest that, within the developmental window studied, microgravity has minimal long-term impact on cognitive mapping function and cellular substrates important for this function. Any differences due to development in microgravity were transient and returned to normal soon after return to Earth.

Kosik, Kenneth S.↗
NASA NTRS1993

MAMS: High resolution atmospheric/surface properties

The Multispectral Atmospheric Mapping Sensor (MAMS) has been used for a number of investigations over the last 8 years. It has served as the basis for retrieval technique development, for atmospheric process studies, and to retrieve geophysical parameters at the surface (land and ocean). It was used most recently to collect high resolution visible and infrared imagery for the CaPE and STORMFEST experiments during FY91 and FY92. The Wildfire spectrometer (similar to MAMS but with different infrared channels) was also used during STORMFEST. The goals of MAMS during CaPE were: (1) to collect MAMS data to support the overall CaPE science objectives; (2) refine techniques for the retrieval of atmospheric moisture and surface geophysical parameters; (3) map the moisture distributions associated with the sea breeze front over Florida with MAMS ancillary satellite data on a case study basis; (4) identify surface features which may serve as local sources of heat and moisture and influence preferential convective regions over Florida, and (5) process MAMS data and derived relevant geophysical parameters to support other CaPE investigators. For STORMFEST both the MAMS and Wildfire spectrometers were used to collect unique multispectral data to study atmospheric processes. The Wildfire objectives were: (1) to collect high quality Wildfire data in conjunction with other in situ and remote measurements available during the STORMFEST field phase (1 February - 15 March 1992); (2) to develop algorithms to retrieve total ozone content and compare with those from TOMS and HIRS (IR); and (3) along with water vapor imagery, use the ozone data to better understand the 3-dimensional structure and dynamics of jet streaks and frontal systems in a case study investigation. The MAMS objectives were: (1) collect MAMS data to support a GSFC investigation of gravity waves; and (2) process the MAMS data to locate gravity wave features, and produce various moisture products in support of the gravity wave investigation. The research activities over the last year are presented and they focused on analyzing the CaPE data sets and collecting and starting preliminary analysis of the STORMFEST MAMS and Wildfire data.

Jedlovec, Gary J.↗
NASA NTRS2000

Structure and Dynamics of the Polar Regions of Mars from MGS Topography and Gravity

The Mars Global Surveyor (MGS) spacecraft has been engaged in systematic mapping of Mars since insertion into Mars orbit in September, 1997. The objectives of the MGS mission are to globally map Mars as well as to quantify seasonal changes on the planet. MGS geophysical/geodetic observations of topography from the Mars Orbiter Laser Altimeter (MOLA) and gravity from the Radio Science investigation are providing significant new insights on both static and time-varying aspects of the polar regions of Mars. These observations have implications for polar processes on diurnal seasonal and climatic timescales. Thus far, MOLA has collected over 300 million precise measurements of Martian topography and cloud heights. The instrument has also provided measurements of the width of the backscattered optical pulse and of the 1064 nm reflectivity of the Martian surface and atmosphere. The along-track resolution of MOLA ground shots is approx. 300 m and the across-track spacing in the polar regions is a maximum of about four kilometers. The vertical accuracy of the topography is determined by the precision recovery of spacecraft orbits from the Radio Science investigation, which includes MOLA altimetry in the form of crossovers. This accuracy is currently approx. one meter. The gravity field is derived from X-band Doppler tracking with typical accuracy of 0.03 to 0.05 mm/s averaged over ten seconds. Current Mars gravity fields are to approximately degree and order 80 but are interpretable to the approximate degree and order 60 (spatial resolution < 180 km), which represents an estimate of the approximate coefficient limit of a field that can be produced without a power law constraint on the gravitational field inversion, which is commonly imposed for solution stability. Additional information is contained in the original extended abstract.

Zuber, Maria T.↗
DOE OSTI2025

Non-isometry, state dependence and holography

We establish an equivalence between non-isometry of quantum codes and state dependence of operator reconstruction, and discuss implications of this equivalence for holographic duality. Specifically, we define quantitative measures of non-isometry and state dependence and describe bounds relating these quantities. In the context of holography we show that, assuming known gravitational path integral results for overlaps between semiclassical states, non-isometric bulk-to-boundary maps with a trivial kernel are approximately isometric and bulk reconstruction approximately state-independent. In contrast, non-isometric maps with a non-empty kernel always lead to state-dependent reconstruction. We also show that if a global bulk-to-boundary map is non-isometric, then there exists a region in the bulk which is causally disconnected from the boundary. Finally, we conjecture that, under certain physical assumptions for the definition of the Hilbert space of effective field theory in AdS space, the presence of a global horizon implies a non-isometric global bulk-to-boundary map.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2007

Establishing a Near Term Lunar Farside Gravity Model via Inexpensive Add-on Navigation Payload

The Space Communications and Navigation, Constellation Integration Project (SCIP) is tasked with defining, developing, deploying and operating an evolving multi-decade communications and navigation (C/N) infrastructure including services and subsystems that will support both robotic and human exploration activities at the Moon. This paper discusses an early far side gravitational mapping service and related telecom subsystem that uses an existing spacecraft (WIND) and the Lunar Reconnaissance Orbiter (LRO) to collect data that would address several needs of the SCIP. An important aspect of such an endeavor is to vastly improve the current lunar gravity model while demonstrating the navigation and stationkeeping of a relay spacecraft. We describe a gravity data acquisition activity and the trajectory design of the relay orbit in an Earth-Moon L2 co-linear libration orbit. Several phases of the transfer from an Earth-Sun to the Earth-Moon region are discussed along with transfers within the Earth-Moon system. We describe a proposed, but not integrated, add-on to LRO scheduled to be launched in October of 2008. LRO provided a real host spacecraft against which we designed the science payload and mission activities. From a strategic standpoint, LRO was a very exciting first flight opportunity for gravity science data collection. Gravity Science data collection requires the use of one or more low altitude lunar polar orbiters. Variations in the lunar gravity field will cause measurable variations in the orbit of a low altitude lunar orbiter. The primary means to capture these induced motions is to monitor the Doppler shift of a radio signal to or from the low altitude spacecraft, given that the signal is referenced to a stable frequency reference. For the lunar far side, a secondary orbiting radio signal platform is required. We provide an in-depth look at link margins, trajectory design, and hardware implications. Our approach posed minimum risk to a host mission while maintaining a very low implementation and operations cost.

Folta, David↗
NASA NTRS1994

High degree gravitational sensitivity from Mars orbiters for the GMM-1 gravity model

Orbital sensitivity of the gravity field for high degree terms (greater than 30) is analyzed on satellites employed in a Goddard Mars Model GMM-1, complete in spherical harmonics through degree and order 50. The model is obtained from S-band Doppler data on Mariner 9 (M9), Viking Orbiter 1 (VO1), and Viking Orbiter 2 (VO2) spacecraft, which were tracked by the NASA Deep Space Network on seven different highly eccentric orbits. The main sensitivity of the high degree terms is obtained from the VO1 and VO2 low orbits (300 km periapsis altitude), where significant spectral sensitivity is seen for all degrees out through degree 50. The velocity perturbations show a dominant effect at periapsis and significant effects out beyond the semi-latus rectum covering over 180 degrees of the orbital groundtrack for the low altitude orbits. Because of the wideband of periapsis motion covering nearly 180 degrees in w and +39 degrees in latitude coverage, the VO1 300 km periapsis altitude orbit with inclination of 39 degrees gave the dominant sensitivity in the GMM-1 solution for the high degree terms. Although the VO2 low periapsis orbit has a smaller band of periapsis mapping coverage, it strongly complements the VO1 orbit sensitivity for the GMM-1 solution with Doppler tracking coverage over a different inclination of 80 degrees.

Lerch, F. J.↗
NASA NTRS1995

NASA Tech Briefs, November 1995

The contents include: 1) Mission Accomplished; 2) Resource Report: Marshall Space Flight Center; 3) NASA 1995 Software of the Year Award; 4) Microbolometers Based on Epitaxial YBa2Cu3O(sub 7-x) Thin Films; 5) Garnet Random-Access Memory; 6) Fabrication of SNS Weak Links on SOS Substrates; 7) High-Voltage MOSFET Switching Circuit; 8) Asymmetric Switching for a PWM H-Bridge Power Circuit; 9) Better Ohmic Contacts for InP Semiconductor Devices; 10) Low-Bandgap Thermovoltaic Materials and Devices; 11) Digital Frequency-Differencing Circuit; 12) Imaging Magnetometer; 13) Computer-Assisted Monitoring of a Complex System; 14) Buffered Telemetry Demodulator; 15) Compact Multifunction Inspection Head; 16) Optical Detection of Fractures in Ceramic Diaphragms; 17) Eddy-Current Detection of Cracks in Reinforced Carbon/Carbon; 18) Apparent Thermal Conductivity of Multilayer Insulation; 19) Optimizing Misch-Metal Compositions in Metal Hydride Anodes; 20) Device for Sampling Surface Contamination; 21) Probabilistic Failure Assessment for Fatigue; 22) Probabilistic Fatigue and Flaw-Propagation Analysis; 23) Windows Program for Driving the TDU-850 Printer; 24) Subband/Transform MATLAB Functions for Processing Images; 25) Computing Equilibrium Chemical Compositions; 26) Program Processes Thermocouple Readings; 27) ICAN-Second-Generation Integrated Composite Analyzer; 28) Integrated Composite Analyzer with Damping Capabilities; 29) Computing Efficiency of Transfer of Microwave Power; 30) Program Calculates Power Demands of Electronic Designs; 31) Cost-Estimation Program; 32) Program Estimates Areas Required by Electronic Designs; 33) Program to Balance Mapped Turbopump Assemblies; 34) BiblioTech; 35) Controlling Mirror Tilt With a Bimorph Actuator; 36) Burst-Disk Device Simulates Effect of Pyrotechnic Device; 37) Bearing-Mounting Concept Accommodates Thermal Expansion; 38) Parallel-Plate Acoustic Absorbers for Hot Environments; 39) Adjustable-Length Strut Withstands Large Cyclic Loads; 40) Tool Indicates Contact Angles in Bearing Raceways; 41) Gravity Slides With Magnetic Braking; 42) High-Torque, Lightweight, Pneumatically Driven Wrench for Small Spaces; 43) Device for Testing Compatibility of an O-Ring; 44) Magnetic Heat Pump Containing Flow Diverters; 45) Variable-Tilt Helicopter Rotor Mast; 46) "Beach-Ball" Robotic Rovers; 47) Apparatus Would Measure Temperatures of Ball Bearings; 48) Flexible Borescope for Inspecting Ducts; 49) Texturing Copper To Reduce Secondary Emission of Electrons; 50) Automated Laser Cutting in Three Dimensions; 51) Algorithm Helps Monitor Engine Operation; 52) Flexible Revision of Data-Processing Communications; 53) Software for Managing the Use of Land; 54) Thermal Strap Increases Cryocooling Efficiency; 55) Reversible Nut With Engagement Indication; 56) Control Algorithms for Kinematically Redundant Manipulators; 57) Computed Hydrogen-Flow Splits in a Rocket Engine; 58) Pressure and Thermal Modeling of Rocket Launches; 59) Field of View of a Spacecraft Antenna: Analysis and Software; 60) Digital Controller for Laser-Beam-Steering Subsystem; 61) More About Beam-Steering Subsystem for Laser Communication; 62) Digital Controller for Laser-Beam-Steering Subsystem: Part 2; 63) Interface Circuit Board for Space-Shuttle Communications; 64) Automated Planning of Spacecraft Telecommunications; 65) Artifacts of Spectral Analysis of Instrument Readings; 66) Neural-Network Controller for Vibration Suppression; 67) Adaptive Finite-Element Computation in Fracture Mechanics; 68) Attitude Control for the Cassini Spacecraft; 69) Analytical Model for Fluid Dynamics in a Microgravity Environment; 70) Study of Rocket-Engine Joints Bonded by NVCU/NARloy-Z; 71) Improved Silicon Nitride for Advanced Heat Engines; 72) Parameters for Welding Aluminum/Lithium Alloys; 73) Lightweight Composite Intertank Structure; 74) Foil Patches Seal Small Vacuum Leaks; 75) Data Base on Cables and Connectors; 76) Effect of Clock Mode on Radiation Hardnessf an ADC; and 77) Fault-Tolerant Control for a Robotic Inspection System.

Source record↗