SEARCH · Search NASA

Results for “group representations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1998

Clementine High Resolution Camera Mosaicking Project: CL 6021; 80 deg S to 90 deg S Latitude, North Periapsis - Volume 21

This compact disk (CD) is part of the Clementine I high resolution (HiRes) camera lunar image mosaics developed by Malin Space Science Systems (MSSS). These mosaics were developed through calibration and semi-automated registration against the recently released geometrically and photometrically controlled Ultraviolet/Visible (UV/Vis) Basemap Mosaic, which is available through the PDS, as CD-ROM volumes CL_3001-3015. The HiRes mosaics are compiled from non-uniformity corrected, 750 nanometer ("D") filter high resolution observations from the HiRes imaging system onboard the Clementine Spacecraft. The geometric control is provided by the U. S. Geological Survey (USGS) Clementine Basemap Mosaic compiled from the 750 nm Ultraviolet/Visible Clementine imaging system. Calibration was achieved by removing the image nonuniformity largely caused by the HiRes system's light intensifier. Also provided are offset and scale factors, achieved by a fit of the HiRes data to the corresponding photometrically calibrated UV/Vis basemap that approximately transform the 8-bit HiRes data to photometric units. The mosaics on this CD are compiled from polar data (latitudes greater than 80 degrees), and are presented in the stereographic projection at a scale of 30 m/pixel at the pole, a resolution 5 times greater than that (150 m/pixel) of the corresponding UV/Vis polar basemap. This 5:1 scale ratio is in keeping with the sub-polar mosaic, in which the HiRes and UV/Vis mosaics had scales of 20 m/pixel and 100 m/pixel, respectively. The equal-area property of the stereographic projection made this preferable for the HiRes polar mosaic rather than the basemap's orthographic projection. Thus, a necessary first step in constructing the mosaic was the reprojection of the UV/Vis basemap to the stereographic projection. The HiRes polar data can be naturally grouped according to the orbital periapsis, which was in the south during the first half of the mapping mission and in the north during the second half. Images in each group have generally uniform intrinsic resolution, illumination, exposure and gain. Rather than mingle data from the two periapsis epochs, separate mosaics are provided for each, a total of 4 polar mosaics. The mosaics are divided into 100 square tiles of 2250 pixels (approximately 2.2 deg near the pole) on a side. Not all squares of this grid contain HiRes mosaic data, some inevitably since a square is not a perfect representation of a (latitude) circle, others due to the lack of HiRes data. This CD also contains ancillary data files that support the HiRes mosaic. These files include browse images with UV/Vis context stored in a Joint Photographic Experts Group (JPEG) format, index files ('imgindx.tab' and 'srcindx.tab') that tabulate the contents of the CD, and documentation files. For more information on the contents and organization of the CD volume set refer to the "FILES, DIRECTORIES AND DISK CONTENTS" section of this document. The image files are organized according to NASA's Planetary Data System (PDS) standards. An image file (tile) is organized as a PDS labeled file containing an "image object".

Malin, Michael↗

NASA NTRS1998

Clementine High Resolution Camera Mosaicking Project: CL 6019; 80 deg N to 90 deg N Latitude, North Periapsis - Volume 19

Malin, Michael↗

NASA NTRS1993

Real group velocity in a medium with dissipation

In order to clarify the role of the imaginary term Im(d(omega)/dk), the motion of a wave packet in a dissipative, homogeneous medium is examined. The integral representation of the packet is analyzed by means of a saddle-point method. It is shown that in a moving frame attached to its maximum the packet looks self-similar. A Gaussian packet keeps its Gaussian identity, as is typical for the case of a nondissipative medium. The central wave number of the packet slowly changes because of a different damping among the Fourier components. Simple 'ray-tracing equations' are derived to follow the packet centers in coordinate and Fourier spaces. The analysis is illustrated with a comparison to geometric optics, and with two applications: the case of a medium with some resonant damping (or growth) and the propagation of whistler waves in a collisional plasma.

Muschietti, L.↗

NASA NTRS2005

Mathematical Metaphors: Problem Reformulation and Analysis Strategies

This paper addresses the critical need for the development of intelligent or assisting software tools for the scientist who is working in the initial problem formulation and mathematical model representation stage of research. In particular, examples of that representation in fluid dynamics and instability theory are discussed. The creation of a mathematical model that is ready for application of certain solution strategies requires extensive symbolic manipulation of the original mathematical model. These manipulations can be as simple as term reordering or as complicated as discovery of various symmetry groups embodied in the equations, whereby Backlund-type transformations create new determining equations and integrability conditions or create differential Grobner bases that are then solved in place of the original nonlinear PDEs. Several examples are presented of the kinds of problem formulations and transforms that can be frequently encountered in model representation for fluids problems. The capability of intelligently automating these types of transforms, available prior to actual mathematical solution, is advocated. Physical meaning and assumption-understanding can then be propagated through the mathematical transformations, allowing for explicit strategy development.

Thompson, David E.↗

DOE OSTI2020

Predicting Elastic Properties of Materials from Electronic Charge Density Using 3D Deep Convolutional Neural Networks

Materials representation plays a key role in machine learning-based prediction of materials properties and new materials discovery. Currently both graph and three-dimensional (3D) voxel representation methods are based on the heterogeneous elements of the crystal structures. Here, we propose to use electronic charge density (ECD) as a generic unified 3D descriptor for materials property prediction with the advantage of possessing close relation with the physical and chemical properties of materials. We developed an ECD-based 3D convolutional neural networks (CNNs) for predicting the elastic properties of materials, in which CNNs can learn effective hierarchical features with multiple convolving and pooling operations. Extensive benchmark experiments over 2170 $Fm\bar3m$ face-centered-cubic materials show that our ECD-based CNNs can achieve good performance for elasticity prediction. Especially, our CNN models based on the fusion of elemental Materials-Agnostic Platform for Informatics and Exploration features and ECD descriptors achieved the best fivefold cross-validation performance. More importantly, we showed that our ECD-based CNN models can achieve significantly better extrapolation performance when evaluated over nonredundant data sets, where there are few neighbor-training samples around test samples. As an additional validation, we evaluated the predictive performance of our models on 329 materials of space group $Fm\bar3m$ by comparing to density functional theory calculated values, which shows a better prediction power of our model for bulk modulus than shear modulus. Because of the unified representation power of ECD, it is expected that our ECD-based CNN approach can also be applied to predict other physical and chemical properties of crystalline materials.

36 MATERIALS SCIENCE↗

DOE OSTI2022

A Classification of G -invariant Shallow Neural Networks

When trying to fit a deep neural network (DNN) to a G-invariant target function with G a group, it only makes sense to constrain the DNN to be G-invariant as well. However, there can be many different ways to do this, thus raising the problem of “G-invariant neural architecture design”: What is the optimal Ginvariant architecture for a given problem? Before we can consider the optimization problem itself, we must understand the search space, the architectures in it, and how they relate to one another. In this paper, we take a first step towards this goal; we prove a theorem that gives a classification of all G-invariant single-hidden-layer or “shallow” neural network (G-SNN) architectures with ReLU activation for any finite orthogonal group G, and we prove a second theorem that characterizes the inclusion maps or “network morphisms” between the architectures that can be leveraged during neural architecture search (NAS). The proof is based on a correspondence of every G-SNN to a signed permutation representation of G acting on the hidden neurons; the classification is equivalently given in terms of the first cohomology classes of G, thus admitting a topological interpretation. The G-SNN architectures corresponding to nontrivial cohomology classes have, to our knowledge, never been explicitly identified in the literature previously. Using a code implementation, we enumerate the G-SNN architectures for some example groups G and visualize their structure. Lastly, we prove that architectures corresponding to inequivalent cohomology classes coincide in function space only when their weight matrices are zero, and we discuss the implications of this for NAS.

Agrawal, Devanshu↗

DOE OSTI2024

Complexity of many-body interactions in transition metals via machine-learned force fields from the TM23 data set

Abstract This work examines challenges associated with the accuracy of machine-learned force fields (MLFFs) for bulk solid and liquid phases ofd-block elements. In exhaustive detail, we contrast the performance of force, energy, and stress predictions across the transition metals for two leading MLFF models: a kernel-based atomic cluster expansion method implemented using sparse Gaussian processes (FLARE), and an equivariant message-passing neural network (NequIP). Early transition metals present higher relative errors and are more difficult to learn relative to late platinum- and coinage-group elements, and this trend persists across model architectures. Trends in complexity of interatomic interactions for different metals are revealed via comparison of the performance of representations with different many-body order and angular resolution. Using arguments based on perturbation theory on the occupied and unoccupieddstates near the Fermi level, we determine that the large, sharpddensity of states both above and below the Fermi level in early transition metals leads to a more complex, harder-to-learn potential energy surface for these metals. Increasing the fictitious electronic temperature (smearing) modifies the angular sensitivity of forces and makes the early transition metal forces easier to learn. This work illustrates challenges in capturing intricate properties of metallic bonding with current leading MLFFs and provides a reference data set for transition metals, aimed at benchmarking the accuracy and improving the development of emerging machine-learned approximations.

Chemistry↗

DOE OSTI2024

Theory of quantum circuits with Abelian symmetries

Quantum circuits with gates (local unitaries) respecting a global symmetry have broad applications in quantum information science and related fields, such as condensed-matter theory and quantum thermodynamics. However, despite their widespread use, fundamental properties of such circuits are not well understood. Recently, it was found that generic unitaries respecting a global symmetry cannot be realized, even approximately, using gates that respect the same symmetry. This observation raises important open questions: What unitary transformations can be realized with k -local gates that respect a global symmetry? In other words, in the presence of a global symmetry, how does the locality of interactions constrain the possible time evolution of a composite system? In this work, we address these questions for the case of Abelian (commutative) symmetries and develop constructive methods for synthesizing circuits with such symmetries. Remarkably, as a corollary, we find that, while the locality of interactions still imposes additional constraints on realizable unitaries, certain restrictions observed in the case of non-Abelian symmetries do not apply to circuits with Abelian symmetries. For instance, in circuits with a general non-Abelian symmetry such as SU ( d ) , the unitary realized in a subspace with one irreducible representation (charge) of the symmetry dictates the realized unitaries in multiple other sectors with inequivalent representations of the symmetry. Furthermore, in certain sectors, rather than all unitaries respecting the symmetry, the realizable unitaries are the symplectic or orthogonal subgroups of this group. We prove that none of these restrictions appears in the case of Abelian symmetries. This result suggests that global non-Abelian symmetries may affect the thermalization of quantum systems in ways not possible under Abelian symmetries. Published by the American Physical Society 2024

Marvian, Iman↗

NASA NTRS1993

Vision based obstacle detection and grouping for helicopter guidance

Electro-optical sensors can be used to compute range to objects in the flight path of a helicopter. The computation is based on the optical flow/motion at different points in the image. The motion algorithms provide a sparse set of ranges to discrete features in the image sequence as a function of azimuth and elevation. For obstacle avoidance guidance and display purposes, these discrete set of ranges, varying from a few hundreds to several thousands, need to be grouped into sets which correspond to objects in the real world. This paper presents a new method for object segmentation based on clustering the sparse range information provided by motion algorithms together with the spatial relation provided by the static image. The range values are initially grouped into clusters based on depth. Subsequently, the clusters are modified by using the K-means algorithm in the inertial horizontal plane and the minimum spanning tree algorithms in the image plane. The object grouping allows interpolation within a group and enables the creation of dense range maps. Researchers in robotics have used densely scanned sequence of laser range images to build three-dimensional representation of the outside world. Thus, modeling techniques developed for dense range images can be extended to sparse range images. The paper presents object segmentation results for a sequence of flight images.

Sridhar, Banavar↗

NASA NTRS2011

Tropical and Subtropical Cloud Transitions in Weather and Climate Prediction Models: The GCSS/WGNE Pacific Cross-Section Intercomparison (GPCI)

A model evaluation approach is proposed in which weather and climate prediction models are analyzed along a Pacific Ocean cross section, from the stratocumulus regions off the coast of California, across the shallow convection dominated trade winds, to the deep convection regions of the ITCZ the Global Energy and Water Cycle Experiment Cloud System Study/Working Group on Numerical Experimentation (GCSS/ WGNE) Pacific Cross-Section Intercomparison (GPCI). The main goal of GPCI is to evaluate and help understand and improve the representation of tropical and subtropical cloud processes in weather and climate prediction models. In this paper, a detailed analysis of cloud regime transitions along the cross section from the subtropics to the tropics for the season June July August of 1998 is presented. This GPCI study confirms many of the typical weather and climate prediction model problems in the representation of clouds: underestimation of clouds in the stratocumulus regime by most models with the corresponding consequences in terms of shortwave radiation biases; overestimation of clouds by the 40-yr ECMWF Re-Analysis (ERA-40) in the deep tropics (in particular) with the corresponding impact in the outgoing longwave radiation; large spread between the different models in terms of cloud cover, liquid water path and shortwave radiation; significant differences between the models in terms of vertical cross sections of cloud properties (in particular), vertical velocity, and relative humidity. An alternative analysis of cloud cover mean statistics is proposed where sharp gradients in cloud cover along the GPCI transect are taken into account. This analysis shows that the negative cloud bias of some models and ERA-40 in the stratocumulus regions [as compared to the first International Satellite Cloud Climatology Project (ISCCP)] is associated not only with lower values of cloud cover in these regimes, but also with a stratocumulus-to-cumulus transition that occurs too early along the trade wind Lagrangian trajectory. Histograms of cloud cover along the cross section differ significantly between models. Some models exhibit a quasi-bimodal structure with cloud cover being either very large (close to 100%) or very small, while other models show a more continuous transition. The ISCCP observations suggest that reality is in-between these two extreme examples. These different patterns reflect the diverse nature of the cloud, boundary layer, and convection parameterizations in the participating weather and climate prediction models.

Teixeira, J.↗

DOE OSTI2022

Branches, quivers, and ideals for knot complements

We generalize the F K invariant, i.e. Z^ for the complement of a knot K in the 3-sphere, the knots-quivers correspondence, and A-polynomials of knots, and find several interconnections between them. We associate an F K invariant to any branch of the A-polynomial of K and we work out explicit expressions for several simple knots. We show that these F K invariants can be written in the form of a quiver generating series, in analogy with the knots-quivers correspondence. We discuss various methods to obtain such quiver representations, among others using R-matrices. We generalize the quantum a-deformed A-polynomial to an ideal that contains the recursion relation in the group rank, i.e. in the parameter a, and describe its classical limit in terms of the Coulomb branch of a 3d-5d theory. We also provide t-deformed versions. Furthermore, we study how the quiver formulation for closed 3-manifolds obtained by surgery leads to the superpotential of 3d N = 2 theory T[M 3 ] and to the data of the associated modular tensor category MTC[M 3 ].

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1997

Application of the Pseudo Wigner-Ville Distribution to the Measurement of the Dispersion of Lamb Modes in Graphite/Epoxy Plates

Acoustic waves propagate in thin plates as guided or Lamb modes. The velocities of these modes are dispersive in that they depend not only on the material elastic properties and density, but also on the frequency. Accurate characterization of Lamb wave dispersion is important in many acoustic based nondestructive evaluation techniques. It is necessary for ultrasonic measurements in thin plates to determine elastic properties and for flaw detection and localization. In acoustic emission (AE) testing, if not taken into account, highly dispersive Lamb mode propagation can lead to large errors in source location. In this study, the pseudo Wigner-Ville distribution (PWVD) was used for measurement of group velocity dispersion of Lamb waves in a unidirectional graphite/epoxy (AS4/3502) laminate. The PWVD is one of a number of transforms which provide a time-frequency representation of a digitized time series. Broad band acoustic waves were generated by a pencil lead fracture (Hsu-Neilsen source) and were detected with broad band ultrasonic transducers. The arrival times for the lowest order symmetric (S(sub 0)) and antisymmetric (A(sub 0)) Lamb modes were determined from measurements of the time at which the respective peak amplitudes occurred in the PWVD. Measurements were made at several source-to-detector distances and a least squares fit used to calculate the velocity. Results are presented for propagation along, and perpendicular to, the fiber direction. Theoretical dispersion curves were also calculated and a comparison between theory and experiment demonstrates good agreement.

Prosser, W. H.↗

DOE OSTI2025

CMIP7 data request: impacts and adaptation priorities and opportunities

The Coupled Model Intercomparison Project Phase 7 (CMIP7) undertook an extensive process to gather community input and refine data requests related to impacts and adaptation applications of Earth System Model (ESM) outputs. The Impacts and Adaptation (I&A) Data Request Team worked with CMIP7 leadership to distribute an open solicitation across many communities that use climate model outputs requesting inputs for new and existing variables, the most applicable temporal characteristics, and groupings of variables that together allow for specific application opportunities. This input was then collated and translated into CMIP7 standard templates for inclusion in the broader data request, leading to 13 I&A data request opportunities, 60 variable groups and 539 unique variables sought by vulnerability, impacts, adaptation, and climate services user communities. Here, we describe these opportunities and variable groups, as well as new insights into how ESM groups can prioritize outputs that set off a chain of further analyses, ultimately informing decisions impacting society and natural systems. These include an emphasis on high-resolution outputs to allow further modeling of climate impacts at regional and local scales, improved representation of extreme weather events, enhanced accuracy of downscaling and bias-adjustment techniques, and support for more detailed assessments for decision-making in adaptation and mitigation strategies. There is also broad interest in more extensive provisioning of two-dimensional variables at the Earth's surface, prioritizing experiments that enhance our understanding of both the recent past and future scenarios, and providing outputs that allow further downscaling and bias adjustment. We emphasize that variable groups are the fundamental level at which to engage with the I&A data request, matching the scale of input and the way output provision enables specific I&A applications. Given resource constraints, we applaud CMIP7 efforts to foster strong engagement and communication between ESM groups and the I&A team to build consensus around prudent compromises in priority variables, temporal resolutions, simulation experiments, time subsets, and ensemble members.

Ruane, Alex C. [NASA Goddard Inst. for Space Studi↗

DOE OSTI2025

Complexity Reduction Methods for Large-Scale Spatially Explicit Biofuels Network Design

The size and complexity of energy system optimization models have increased significantly in recent years, driven by the availability of high-resolution spatial data. We present complexity reduction and solution methods that enable us to efficiently represent high-resolution spatial data in the network design of large-scale energy systems. We aim to reduce the size and enhance the computational efficiency of network design models without sacrificing solution accuracy. Specifically, we first present how to aggregate highly granular data into larger resolutions without averaging out their specific properties through a composite-curve-based approach and then develop a method to linearly represent these curves. Second, we utilize a general clustering method to determine groups of geographically proximate biomass fields and establish a single transportation arc for all of them, reducing the number of transportation-related variables while maintaining an accurate representation of the system. Finally, we introduce a two-step algorithm that decomposes large-scale network design problems into two smaller, more manageable subproblems. We demonstrate the application of our methods using a case study of switchgrass-to-biofuels network design in the eight states of the U.S. Midwest, using realistic and highly explicit spatial data.

09 BIOMASS FUELS↗

DOE OSTI2023

Snekmer: a scalable pipeline for protein sequence fingerprinting based on amino acid recoding

Abstract Motivation The vast expansion of sequence data generated from single organisms and microbiomes has precipitated the need for faster and more sensitive methods to assess evolutionary and functional relationships between proteins. Representing proteins as sets of short peptide sequences (kmers) has been used for rapid, accurate classification of proteins into functional categories; however, this approach employs an exact-match methodology and thus may be limited in terms of sensitivity and coverage. We have previously used similarity groupings, based on the chemical properties of amino acids, to form reduced character sets and recode proteins. This amino acid recoding (AAR) approach simplifies the construction of protein representations in the form of kmer vectors, which can link sequences with distant sequence similarity and provide accurate classification of problematic protein families. Results Here, we describe Snekmer, a software tool for recoding proteins into AAR kmer vectors and performing either (i) construction of supervised classification models trained on input protein families or (ii) clustering for de novo determination of protein families. We provide examples of the operation of the tool against a set of nitrogen cycling families originally collected using both standard hidden Markov models and a larger set of proteins from Uniprot and demonstrate that our method accurately differentiates these sequences in both operation modes. Availability and implementation Snekmer is written in Python using Snakemake. Code and data used in this article, along with tutorial notebooks, are available at http://github.com/PNNL-CompBio/Snekmer under an open-source BSD-3 license. Supplementary information Supplementary data are available at Bioinformatics Advances online.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2000

A Coupled Ocean General Circulation, Biogeochemical, and Radiative Model of the Global Oceans: Seasonal Distributions of Ocean Chlorophyll and Nutrients

A coupled ocean general circulation, biogeochemical, and radiative model was constructed to evaluate and understand the nature of seasonal variability of chlorophyll and nutrients in the global oceans. Biogeochemical processes in the model are determined from the influences of circulation and turbulence dynamics, irradiance availability. and the interactions among three functional phytoplankton groups (diatoms. chlorophytes, and picoplankton) and three nutrients (nitrate, ammonium, and silicate). Basin scale (greater than 1000 km) model chlorophyll results are in overall agreement with CZCS pigments in many global regions. Seasonal variability observed in the CZCS is also represented in the model. Synoptic scale (100-1000 km) comparisons of imagery are generally in conformance although occasional departures are apparent. Model nitrate distributions agree with in situ data, including seasonal dynamics, except for the equatorial Atlantic. The overall agreement of the model with satellite and in situ data sources indicates that the model dynamics offer a reasonably realistic simulation of phytoplankton and nutrient dynamics on synoptic scales. This is especially true given that initial conditions are homogenous chlorophyll fields. The success of the model in producing a reasonable representation of chlorophyll and nutrient distributions and seasonal variability in the global oceans is attributed to the application of a generalized, processes-driven approach as opposed to regional parameterization and the existence of multiple phytoplankton groups with different physiological and physical properties. These factors enable the model to simultaneously represent many aspects of the great diversity of physical, biological, chemical, and radiative environments encountered in the global oceans.

Gregg, Watson W.↗

NASA NTRS1999

Seasonal Distributions of Global Ocean Chlorophyll and Nutrients: Analysis with a Coupled Ocean General Circulation Biogeochemical, and Radiative Model

A coupled general ocean circulation, biogeochemical, and radiative model was constructed to evaluate and understand the nature of seasonal variability of chlorophyll and nutrients in the global oceans. The model is driven by climatological meteorological conditions, cloud cover, and sea surface temperature. Biogeochemical processes in the model are determined from the influences of circulation and turbulence dynamics, irradiance availability, and the interactions among three functional phytoplankton groups (diatoms, chorophytes, and picoplankton) and three nutrient groups (nitrate, ammonium, and silicate). Phytoplankton groups are initialized as homogeneous fields horizontally and vertically, and allowed to distribute themselves according to the prevailing conditions. Basin-scale model chlorophyll results are in very good agreement with CZCS pigments in virtually every global region. Seasonal variability observed in the CZCS is also well represented in the model. Synoptic scale (100-1000 km) comparisons of imagery are also in good conformance, although occasional departures are apparent. Agreement of nitrate distributions with in situ data is even better, including seasonal dynamics, except for the equatorial Atlantic. The good agreement of the model with satellite and in situ data sources indicates that the model dynamics realistically simulate phytoplankton and nutrient dynamics on synoptic scales. This is especially true given that initial conditions are homogenous chlorophyll fields. The success of the model in producing a reasonable representation of chlorophyll and nutrient distributions and seasonal variability in the global oceans is attributed to the application of a generalized, processes-driven approach as opposed to regional parameterization, and the existence of multiple phytoplankton groups with different physiological and physical properties. These factors enable the model to simultaneously represent the great diversity of physical, biological, chemical, and radiative environments encountered in the global oceans.

Gregg, Watson W.↗

DOE OSTI2022

Modern analogs for understanding pollen-vegetation dynamics in a Mediterranean mosaic landscape (Balearic Islands, Western Mediterranean)

This paper presents the study of modern pollen analogs from the Balearic Islands. While similar studies have been largely applied to mainland areas, research focused on modern vegetation dynamics on Mediterranean islands remains very rare. In this research, we combine vegetation surveys, pollen analysis and multivariate statistics to understand landscape composition. The main objectives of are: (1) to examine pollen-vegetation relationships in relation to environmental and land-use variables; (2) to understand modern pollen representation in a mosaic landscape structure; and (3) to propose pollen indicators that characterize the primary vegetation types from the Balearic Islands to better interpret past pollen records in Mediterranean island environments. Pollen results and Redundancy Analysis (RDA) distinguish three major groups: (a) Holm oak and box formations; (b) maquis and garrigues; and (c) anthropogenic and open habitats. Landscape form, mean decadal rainfall, mean decadal temperature, fire activity, trampling, slope percentage, wet/flooded soil, saline soil, distance to agropastoral cells, gHM index, domestic herbivory presence, agropastoral use, and soil type are the major variables explaining modern pollen assemblage variation in our research. Poaceae undiff., Plantago sp., Apiaceae undiff., Cerealia-t, and Cichorieae are highly correlated to human activities but should be interpreted cautiously when occurring in low values. Quercus ilex-t, Hypericum, and Buxus are correlated to humid locations while Pistacia, Pinus, Juniperus-t, and Olea to high mean decadal temperatures. Our study indicates how pollen analysis and multivariate analysis are powerful tools for characterizing the mosaic landscape, with special focus on the main vegetation types of the Balearic Islands.

Geology↗