Search NASA⌕ Search

SEARCH · Search NASA

Results for “hands-on”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Programmable Logic Device (PLD) Design Description for the Integrated Power, Avionics, and Software (iPAS) Space Telecommunications Radio System (STRS) Radio

The Space Telecommunications Radio System (STRS) provides a common, consistent framework for software defined radios (SDRs) to abstract the application software from the radio platform hardware. The STRS standard aims to reduce the cost and risk of using complex, configurable and reprogrammable radio systems across NASA missions. To promote the use of the STRS architecture for future NASA advanced exploration missions, NASA Glenn Research Center (GRC) developed an STRS compliant SDR on a radio platform used by the Advance Exploration System program at the Johnson Space Center (JSC) in their Integrated Power, Avionics, and Software (iPAS) laboratory. At the conclusion of the development, the software and hardware description language (HDL) code was delivered to JSC for their use in their iPAS test bed to get hands-on experience with the STRS standard, and for development of their own STRS Waveforms on the now STRS compliant platform.The iPAS STRS Radio was implemented on the Reconfigurable, Intelligently-Adaptive Communication System (RIACS) platform, currently being used for radio development at JSC. The platform consists of a Xilinx ML605 Virtex-6 FPGA board, an Analog Devices FMCOMMS1-EBZ RF transceiver board, and an Embedded PC (Axiomtek eBox 620-110-FL) running the Ubuntu 12.4 operating system. Figure 1 shows the RIACS platform hardware. The result of this development is a very low cost STRS compliant platform that can be used for waveform developments for multiple applications.The purpose of this document is to describe the design of the HDL code for the FPGA portion of the iPAS STRS Radio particularly the design of the FPGA wrapper and the test waveform.

VHDL↗
NASA NTRS2017

Work Term Assignment Spring 2017

My tour in the Engineering Robotics directorate exceeded my expectations. I learned lessons about Creo, manufacturing and assembly, collaboration, and troubleshooting. During my first tour, last spring, I used Creo on a smaller project, but had limited experience with it before starting in the Dynamic Systems Test branch this spring. I gained valuable experience learning assembly design, sheet metal design and designing with intent for manufacturing and assembly. These skills came from working both on the hatch and the floor. I also learned to understand the intent of other designers on models I worked with. While redesigning the floor, I was modifying an existing part and worked to understand what the previous designer had done to make it fit with the new model. Through working with the machine shop and in the mock-up, I learned much more about manufacturing and assembly. I used a Dremel, rivet gun, belt sander, and countersink for the first time. Through taking multiple safety training for different machine shops, I learned new machine shop safety skills specific to each one. This semester also gave me new collaborative opportunities. I collaborated with engineers within my branch as well as with Human Factors and the building 10 machine shop. This experience helped me learn how to design for functionality and assembly, not only for what would be easiest in my designs. In addition to these experiences, I learned many lessons in troubleshooting. I was the first person in my office to use a Windows 10 computer. This caused unexpected issues with NASA services and programs, such as the Digital Data Management Server (DDMS). Because of this, I gained experience finding solutions to lockout and freeze issues as well as Creo specific settings. These will be useful skills to have in the future and will be implemented in future rotations. This co-op tour has motivated me more to finish my degree and pursue my academic goals. I intend to take a machining Career Gateway Elective in the Fall to improve my skills in building as well as designing with manufacturing intent. I am also inspired to take more mechatronics CGE courses before I graduate to learn more about the crossover between mechanical and electrical engineering. This semester, I worked on multiple projects and had the opportunity to learn from engineers of different disciplines. I became proficient in Creo 2.0, a program I had not used significantly before. I finished modifying the hatch for 3D print and made sizeable modifications to the nose floor support design. I also gained hands-on experience that will be useful in my engineering career in the future. I would consider all of these major achievements from this spring semester. Lastly, I learned to ask more questions and to search for the right people to find answers which I know will be a valuable skill in the future. This summer, I will be completing my last rotation in the Flight Operations Directorate at Ellington Air Field. After this last tour, I will be returning to school for the Fall, Spring and Summer. I will graduate in August of 2018. I am looking forward to learning more about the different jobs available to engineers. This division works directly with many different types of aircrafts and I am excited to learn more about this focus of engineering. The Aircraft Operations Division values team work greatly and I intend to improve my interpersonal skills by working with them this summer.

Sico, Mallory↗
NASA NTRS2017

Guided Tour of Pythonian Museum

At http:hdfeos.orgzoo, we have a large collection of Python examples of dealing with NASA HDF (Hierarchical Data Format) products. During this hands-on Python tutorial session, we'll present a few common hacks to access and visualize local NASA HDF data. We'll also cover how to access remote data served by OPeNDAP (Open-source Project for a Network Data Access Protocol). As a glue language, we will demonstrate how you can use Python for your data workflow - from searching data to analyzing data with machine learning.

hdf↗
NASA NTRS2017

Earthdata Search Summer ESIP Usability Workshop

The Earthdata Search Client has undergone multiple rounds of usability testing during 2017 and the user feedback received has resulted in an enhanced user interface. This session will showcase the new Earthdata Search Client user interface and provide hands-on experience for participants to learn how to search, visualize and download data in the desired format.

Discovery↗
NASA NTRS2017

Educational Projects in Unmanned Aerial Systems at the NASA Ames Research Center

Unmanned aerial systems (UAS), autonomy and robotics technology have been fertile ground for developing a wide variety of interdisciplinary student learning opportunities. In this talk, several projects will be described that leverage small fixed-wing UAS that have been modified to carry science payloads. These aircraft provide a unique hands-on experience for a wide range of students from college juniors to graduate students pursuing degrees in electrical engineering, aeronautical engineering, mechanical engineering, applied mathematics, physics, structural engineering and other majors. By combining rapid prototyping, design reuse and open-source philosophies, a sustainable educational program has been organized structured as full-time internships during the summer, part-time internships during the school year, short details for military cadets, and paid positions. As part of this program, every summer one or more UAS is developed from concept through design, build and test phases using the tools and facilities at the NASA Ames Research Center, ultimately obtaining statements of airworthiness and flight release from the Agency before test flights are performed. In 2016 and 2017 student projects focused on the theme of 3D printed modular airframes that may be optimized for a given mission and payload. Now in its fifth year this program has served over 35 students, and has provided a rich learning experience as they learn to rapidly develop new aircraft concepts in a highly regulated environment, on systems that will support principal investigators at university, NASA, and other US federal agencies.

UA↗
NASA NTRS2017

The NASA Space Life Sciences Training Program: Accomplishments Since 2013

The NASA Space Life Sciences Training Program (SLSTP) provides undergraduate students entering their junior or senior years with professional experience in space life science disciplines. This challenging ten-week summer program is held at NASA Ames Research Center. The primary goal of the program is to train the next generation of scientists and engineers, enabling NASA to meet future research and development challenges in the space life sciences. Students work closely with NASA scientists and engineers on cutting-edge research and technology development. In addition to conducting hands-on research and presenting their findings, SLSTP students attend technical lectures given by experts on a wide range of topics, tour NASA research facilities, participate in leadership and team building exercises, and complete a group project. For this presentation, we will highlight program processes, accomplishments, goals, and feedback from alumni and mentors since 2013. To date, 49 students from 41 different academic institutions, 9 staffers, and 21 mentors have participated in the program. The SLSTP is funded by Space Biology, which is part of the Space Life and Physical Sciences Research and Application division of NASA's Human Exploration and Operations Mission Directorate. The SLSTP is managed by the Space Biology Project within the Science Directorate at Ames Research Center.

education↗
NASA NTRS2018

Development of Guidelines for In-Situ Repair of SLS-Class Composite Flight Hardware

The purpose of composite repair development at KSC (John F. Kennedy Space Center) is to provide support to the CTE (Composite Technology for Exploration) project. This is a multi-space center effort with the goal of developing bonded joint technology for SLS (Space Launch System) -scale composite hardware. At KSC, effective and efficient repair processes need to be developed to allow for any potential damage to composite components during transport or launch preparation. The focus of the composite repair development internship during the spring of 2018 was on the documentation of repair processes and requirements for process controls based on techniques developed through hands-on work with composite test panels. Three composite test panels were fabricated for the purpose of repair and surface preparation testing. The first panel included a bonded doubler and was fabricated to be damaged and repaired. The second and third panels were both fabricated to be cut into lap-shear samples to test the strength of bond of different surface preparation techniques. Additionally, jointed composite test panels were impacted at MSFC (Marshall Space Flight Center) and analyzed for damage patterns. The observations after the impact tests guided the repair procedure at KSC to focus on three repair methods. With a finalized repair plan in place, future work will include the strength testing of different surface preparation techniques, demonstration of repair methods, and repair of jointed composite test panels being impacted at MSFC.

Weber, Thomas P., Jr.↗
NASA NTRS2018

Electrodynamic Dust Shield (EDS) Preparation for MISSE-11 Launch

The dusty surfaces of the Moon, Mars, and various asteroids present a significant challenge to NASA’s manned and unmanned space exploration efforts. The fine, electrostatically charged dust is difficult to remove and has resulted in vision obscuration, false instrument readings, contamination, elevated temperatures, performance reduction, and equipment failure. To alleviate these problems, NASA KSC’s Electrostatics and Surface Physics Laboratory (ESPL) is developing active dust mitigation systems for solar system exploration and in situ resource utilization (ISRU). Part of KSC’s Swamp Works system, the lab emphasizes fast-paced, hands-on, cost-effective, and collaborative innovation. The Electrodynamic Dust Shield (EDS) is an ESPL technology being developed to prevent dust accumulation on space components. It consists of a dielectric substrate embedded with parallel electrodes which, when applied with high voltage out-of-phase waveforms, produce a traveling electric field wave that scatters dust particles from its surface via dielectrophoretic and electrostatic forces. The EDS is currently fully functional and has been tested for scalability and endurance in reduced gravity/pressure flight. Next, it will be part of the May 2019 Materials International Space Station Experiment-11 (MISSE-11) payload, which will test small shield samples for performance durability with exposure to the harsh space environment. The summer objective was to test EDS functionality before active and passive dust shield samples launch on MISSE-11, in order to screen for good flight/control samples as well as to compare pre-flight and post-flight clearing efficiencies. I imaged glass and Kapton shields of 2-phase and 3-phase electrode configurations with the Keyence VHX-5000 digital microscope to check for damage before and after all testing for a qualitative pre-flight baseline; helped with vacuum testing of high-voltage shield breakdown; assembled shields and wires using Electrobond 004 silver epoxy; and helped with vacuum and cryogenic dust clearance testing of assembled EDS systems. I learned CAD (computer-aided design) and 3D printing skills to create parts for a shaker table/motor assembly, which will allow for repeatable experiments by evening out EDS dust distribution in a consistent manner prior to dust scattering testing. I will also be improving the interfacing with Alpha Space’s prototype Data Communications Unit (DCU), a payload component to control power to the EDS and store data, by mapping the DCU structure upon power-up and writing shell scripts to improve various processes. Finally, I also CADed and 3D-printed plastic supports for three different geometries of the Electrostatic Precipitator (ESP), a project that aims to use high voltage electrodes to charge and filter out dust from the Martian atmosphere drawn for ISRU devices. This work on dust mitigation technologies will help to support future robotic and human space exploration missions, including NASA’s Journey to Mars; the EDS has especially significant applications to spacecraft solar panels, thermal radiators, viewports, and astronaut visors. This opportunity has also allowed me to become more familiar with various lab equipment and hardware testing, develop key modeling skills in SolidWorks, explore past and present components critical to America’s space program, work with inspiring peers and mentors, and ascertain my dream of working permanently for NASA.

space↗
NASA NTRS2018

Modeling In-Space Aborts for NASA Human Exploration Missions

NASA is developing new capabilities to send humans beyond low Earth orbit (LEO) for the first time in several decades with the new Multi-purpose Crew Vehicle (MPCV) Orion spacecraft and Space Launch System (SLS) launch vehicle. As part of these capabilities, NASA is developing means to terminate missions prior to reaching mission destinations in order to save the crew in the event of critical life-threatening failures. This abort capability exists for both ascent and in-space operations. While the risk associated with ascent aborts has been modeled in detail, less has been done in the area of in-space aborts (e.g. Apollo 13). Recent efforts have started to better assess the risk associated with in-space aborts. This paper will describe these efforts. The in-space abort model described in this paper is part of a larger Cross-Program PRA (XPRA) model of exploration missions planned in the next few years to the vicinity of the Moon. The model consists of linked event trees and fault trees and associated rules built using the Systems Analysis Program for Hands-On Integrated Reliability Evaluations (SAPHIRE) tool. This model structure is being built with flexibility in mind in order to perform risk trades and further expansion of the model.

Bigler, Mark A.↗
NASA NTRS2019

Sextant Navigation on the International Space Station: A Human Space Exploration Demo

Astronauts on board the International Space Station (ISS) tested a hand-held sextant to demonstrate potential use on future human exploration missions such as Orion and Gateway. The investigation, designed to aid in the development of emergency navigation methods for future crewed spacecraft, took place from June-December 2018. A sextant provides manual capability to perform star/planet-limb sightings and estimate vehicle state during loss of communication or other contingencies. Its simplicity and independence from primary systems make it useful as an emergency survival backup or confirming measurement source. The concept of using a sextant has heritage in Gemini, Apollo, and Skylab. This paper discusses the instrument selection, flight certification, crew training, product development, experiment execution, and data analysis. Preflight training consisted of a hands-on session with the instrument and practice in a Cupola mock-up with star field projector dome. The experiment itself consisted of several sessions with sextant sightings in the ISS Cupola module by two crew members. Sightings were taken on star pairs, star/moon limb, and moon diameter. The sessions were designed to demonstrate star identification and acquisition, sighting stability, accuracy, and lunar sights. Results are presented which demonstrate sightings within the accuracy goal of 60 arcseconds, even in the presence of window refraction effects and minimal crew training. The crew members provided valuable feedback on sighting products and microgravity stability techniques.

Exploration↗
NASA NTRS2018

Climate Lecture 20: The Educational Global Climate Model (EdGCM)

Climate change will profoundly impact Earth's environmental health as well as the world's economic and geopolitical landscape over the coming decades. The impacts of climate change are, in fact, already beginning to be experienced and have the potential to affect every living plant and animal on Earth within decades. Given this reality, every citizen of this planet should have the right to knowledge about the Earth's climate system and have the option to adapt to, or help mitigate the profound changes that are coming. In addition, a portion of the workforce needs to be capable of interpreting and analyzing climate information because, since the impacts of climate change will be widespread, pervasive, and continue to change over time, more professions will be interacting with climate data. We are already at, or past, the point where educators and their students require access to the scientific and technological resources - computer models, data, and visualization tools - that scientists use daily in the study of climate change. Although scientists use many methods to study Earth's climate system, global climate models (GCMs) have become the primary tools for exploring the complex interactions between components of the entire system: atmosphere, oceans, and land. GCMs are used to make projections of future climate change, to simulate climates of the past, and even to help scientists look for life on other planets. Like any model, a GCM can help people evaluate actions before they are taken. Like Business Intelligence software, they are Climate Intelligence tools. Unfortunately, GCMs are black boxes to most people. A previous chapter in this book by Gary Russell, entitled Building a Climate Model, is one example of the growing body of literature aimed at the general public describing the inner workings of global climate models. This literature goes a long way toward explaining climate model fundamentals. However, it will not be enough to alleviate their black-box nature unless people are afforded hands-on, authentic learning experiences as well.

Chandler, Mark A.↗
NASA NTRS2019

The NASA Space Life Sciences Training Program: Accomplishments Since 2013

The NASA Space Life Sciences Training Program (SLSTP) provides undergraduate students entering their junior or senior years with professional experience in space life science disciplines. This challenging ten-week summer program is held at NASA Ames Research Center. The primary goal of the program is to train the next generation of scientists and engineers, enabling NASA to meet future research and development challenges in the space life sciences. Students work closely with NASA scientists and engineers on cutting-edge research and technology development. In addition to conducting hands-on research and presenting their findings, SLSTP students attend technical lectures given by experts on a wide range of topics, tour NASA research facilities, participate in leadership and team building exercises, and complete a group project. For this presentation, we will highlight program processes, student recruitment, accomplishments, goals, and feedback from alumni and mentors since 2013. To date, 71 students from 53 different academic institutions, 13 staffers, and 29 mentors have participated in the program.The SLSTP is funded by Space Biology, which is part of the Space Life and Physical Sciences Research and Application division of NASA's Human Exploration and Operations Mission Directorate. The SLSTP is managed by the Space Biology Project within the Science Directorate at Ames Research Center.

Rask, Jon↗
NASA NTRS2019

Using Arcane Data: Past Performance in NASA Science’s Principal Investigator (PI) Development Programs and Improving Future Peer Review for Space Flight Missions

This panel will explore challenges and initial findings from three qualitative studies that use the National Aeronautics and Space Administration's (NASA) Science Mission Directorate's(SMD) internal administrative data to begin to assess program effectiveness and document outputs and outcomes. SMD has funded both at and outside NASA, projects that promotethe development of SMD's future principal investigators (PI) workforce and science and technology investigations on space flight missions that advance the high priority science,technology, and exploration objectives. NASA's internal administrative data are arcane because they developed outside of relational databases. The studies reveal unique challenges to locating and using these data to document effective program processes, i.e.,peer review criteria for large flight missions, and results from the PI-development projects,e.g. the Hands-On Project Experience (HOPE) Training Opportunity solicitations limited to NASA Centers the Jet Propulsion Laboratory; and graduate student/postdoctoral opportunities at higher education institutions.

Sladek, Mary Frances↗
NASA NTRSDate not supplied

TPSAS-NF1676L-18153-DND

During this session, NASA scientists and educators will discuss the importance of sky observations to better understand our atmosphere. Through participation in NASA education projects (S?COOL, GLOBE, and MY NASA DATA) K-12 students get practice in being scientists by collecting data and conducting their own inquiry investigations. Workshop participants will engage in hands-on activities showcasing how aerosols can impact the color and clarity of the sky. Teachers will explore NASA satellite imagery and data to predict global patterns of aerosols and observe interactions within Earth atmosphere. The workshop will be structured following the 5E Learning Model. Workshop activities are classroom ready, aligned to the Next Generation Science Standards, and align well with Georgia science standards for Habits of Mind and Nature of Science, as well as the following content standards: S4E3, S4E4, S6E4, S8SR1, S8SR2, S8SR4, SES3, SES5 and SES6.

Sarah Crecelius↗
NASA NTRSDate not supplied

High Flying Interns: NASA's Student Airborne Research Program

The NASA Student Airborne Research Program is an annual summer internship for upper-level undergraduate STEM majors. Each summer since 2009, we have competitively selected ~30 undergraduates from colleges and universities across the United States for this unique airborne research experience. In all past summers, students flew onboard a NASA research aircraft where they assisted in the operation of remote sensing and in situ instrumentation to study the Earth, ocean, and atmosphere. Students also participated in field trips where they acquired data to ground-truth and complement the airborne data. After their flights and field trips, students then spent the rest of summer developing individual research projects using the data they collected as well as data from previous year SARP flights, other NASA airborne campaigns, and NASA satellite data. This summer, we adapted the program to be entirely online. Each of the 28 undergraduate students still completed an individual research project using data from previous SARP flights as well as publicly available data from other airborne campaigns, satellites, and/or ground stations. Students were mentored remotely by five university faculty members, five graduate students, and several additional scientists and engineers from NASA. In order to preserve some aspects of the hands-on research experience, we also shipped each student a box of twenty-four Whole Air Sampling canisters identical to what they would have used to collect air samples onboard the NASA aircraft. Instead, each student collected ground samples near their home starting in mid-April through July. The goal of this sampling was to attempt to characterize the impacts of pandemic-related changes in emissions with time across the United States. The results of that ground sampling are being presented in scientific sessions in this meeting. In addition, students also measured PM2.5 and aerosol optical depth from June through August using sensors provided by the Citizen-Enabled Aerosol Measurements for Satellites (CEAMS) at Colorado State University. We will discuss strategies we employed to conduct research online, the unexpected opportunities that arose, and lessons learned.

STEM disciplines↗
NASA NTRS2020

NASA GPU Hackathon Yields Significant Code Improvements

The NASA GPU Hackathon 2020 brought together application developers and computer experts to help get important NASA applications running effectively on graphics processing unit (GPU) nodes. Nine teams of application developers participated in this virtual event, a major impetus for teams to modernize codes of interest for NASA missions to CPU nodes containing GPU accelerators, with a focus on hands-on problem solving. The photo in Figure1 shows 30 of the more than50 participants. The HECC project and NVIDIA jointly organized the event, and HECC provided five Pleiades nodes each with 4 V100 GPUs for teams to use. The virtual event, which took place over four days from September 28–October 7, 2020, used Microsoft Teams and Slack as collaboration tools. Each team consisted of three to six members from NASA Centers and supporting organizations. The teams were paired with one to two mentors from industry, government, and academia. The experience levels of the teams ranged from being GPU novices to advanced CUDA programming experts. OpenACC and the emerging Kokkos API were used in addition to CUDA for GPU programming. During the event, which focused on accelerating AeroSciences and CFD applications, most teams achieved considerable performance improvements on both GPUs and CPUs. For example, a team with no GPU experience completed a first port of a time-critical loop to a GPU. Another team of expert CUDA programmers were able to restructure their algorithm, yielding a factor of five speed-up. And another team sped up some of their CUDA kernels by a factor of 20, which directly translated into their production code. This article highlights some of the many successes resulting from the event.

HECC↗
NASA NTRSDate not supplied

Leading University Students to the Edge of Space

For over 16 years, the Louisiana Space Grant Consortium (LaSPACE), the NASA Balloon Program Office (BPO), and the NASA Columbia Scientific Balloon Facility (CSBF) have collaborated in a series of high altitude balloon-based programs involving hands-on authentic learning experiences that expose university students and other participants to technical skills, teamwork dynamics, and effective communication methods. Such programs go beyond what is possible to achieve in a normal classroom and help prepare future engineers and scientists for a successful aerospace workforce career. In our collaborative effort, LaSPACE has focused on the program content and student mentoring while NASA BPO and CSBF provide balloon flight support and operations. The entry-level Louisiana Aerospace Catalyst Experiences for Students (LaACES) builds students’ skills in basic electronics, sensor interfacing, real-time programming, mechanical development, and project management. These skills are then applied to the design, development, fabrication, and flight of a small (∼500 gram) balloon payload. Finally, the payloads are flight-tested to an altitude of ∼30 km using a 2 kg latex sounding balloon. The LaACES program includes a set of lectures, activities, and Arduino Mega based electronic kits that are used for skill building and as a core control system for the student payload. The more advanced High Altitude Student Platform (HASP) is designed to carry ∼twelve 3 to 20 kg student payloads to an altitude of about 36 kilometers with flight durations of 10 to 20 hours using a ∼311,500 cubic meter, zero pressure balloon. HASP provides all student payloads with power, downlink telemetry, uplink commanding, and real-time HD video for instrument control and assessment during the flight. While originally developed for university students, these programs have been adapted to projects focused on high school teachers as well as affecting minorities underrepresented in aerospace related science and engineering fields. We are now in the process of adapting the LaACES materials to a pre-engineering curriculum for high school students as well as for widespread access over the internet. During this presentation, we will provide details of both the LaACES and HASP programs, how these programs have engaged participants from all demographic groups, and our current plans for continuing and expanding upon our success.

University↗
NASA NTRSDate not supplied

GL4U: GeneLab for Colleges and Universities

GeneLab for Colleges and Universities (GL4U) will provide space biology-relevant training in bioinformatics to the next generation of scientists through direct and indirect approaches. The GeneLab (GL) team will host two annual data processing bootcamps, one for college-level students (direct) and one for college educators (indirect – Training of Trainers), in which participants learn to analyze space-relevant omics data hosted on GL. The first bootcamp took place in early June 2021 with about 30 SJSU undergraduate students and covered space biology-specific lectures and hands-on instruction using Jupyter Notebooks (JNs) for RNA sequence (RNAseq) data analysis. All training materials including the enclosed files listed below will be made publicly available on GitHub. RNAseq Bootcamp Lectures (attached in combined file): Introduction to NASA, Space Biology, GeneLab, and the Command Line: NASA_GL_CL_Intro_FINAL.pdf - DRAFT from initial submission NASA_SB_GL_CL_Intro_FULL.pdf - FINAL version presented during the bootcamp - only minor edits from the draft version RNAseq and Data Processing Overview: RNAseq_Overview_FINAL.pdf - DRAFT from initial submission RNAseq_Overview_FULL.pdf - FINAL version presented during the bootcamp - only minor edits from the draft version Overview of the Statistics Used for RNAseq Data Analysis: SJSU_Statistics_Intro_Lecture_FINAL.pdf - DRAFT from initial submission Statistics_Overview_FULL.pdf - FINAL version presented during the bootcamp - only minor edits from the draft version Completed JNs in HTML format (attached in combined file): Unix_Intro_JN_06-2021_completed.html R_Intro_JN_06-2021_completed.html RNAseq_fastq_to_counts_JN_06-2021_completed.html RNAseq_DGE_JN_06-2021_completed.html RNAseq Bootcamp Recordings (attached): GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day1_Part_1_of_5.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day1_Part_2_of_5.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day1_Part_3_of_5.mp4 *There were issues with the part 4 recording so that is not available GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day1_Part_5_of_5.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day2_Part_1_of_3.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day2_Part_2_of_3.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day2_Part_3_of_3.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day3_Part_1_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day3_Part_2_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day3_Part_3_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day3_Part_4_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day4_Part_1_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day4_Part_2_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day4_Part_3_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day4_Part_4_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day5_Part_1_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day5_Part_2_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day5_Part_3_of_4.mp4 GL4U_RNAseq_Bootcamp_June_2021_Pilot_Day5_Part_4_of_4.mp4

GeneLab↗