Search NASA⌕ Search

SEARCH · Search NASA

Results for “heat wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Quasioptical propagation and absorption of electron cyclotron waves: simulations and experiment

Electron-cyclotron resonance heating is an essential tool for manipulating fusion plasmas and has been diligently studied for decades through numerical simulations and experiments. Here, we report the first comparison of simulations using the quasioptical code PARADE (PAraxial RAy DEscription) with experiments using a target-plate system on the Large Helical Device. We find that the numerical and experimental results agree qualitatively, which makes PARADE a promising code for modeling of electron-cyclotron wave beams in future experiments. The signature advantage of PARADE is its ability to capture both mode conversion and inhomogeneity of the dissipation rate across the beam cross section. Accounting for these effects, which can noticeably affect the power deposition, significantly improves the agreement between numerical results and experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Concept of Dynamic Heat Insulation for Rotating Detonation Engines

This work introduces a new class of materials concept to dynamically reduce instantaneous heat fluxes in Rotating Detonation Engine (RDE) combustor chamber walls. The high-frequency and high-amplitude surface heat fluxes observed in RDEs arise from large instantaneous temperature differences between the detonation shockwave and chamber wall surface. These temperature gradients drive substantial energy loss and reduce the chamber gas pressure, ultimately limiting the cycle’s thermodynamic efficiency. This work introduces a concept for dynamically insulating the combustion chamber surfaces using surface layers or coatings with low thermal time scale. With such coatings, the surface temperature may follow the fluctuations of the cyclic detonation wave temperature, thus reducing the instantaneous heat flux therefore cycle-mean heat flux. To analyze these cyclic thermal phenomena, a one-dimensional analytical conduction solver was utilized with the capability to handle multilayered structures. Parametric modeling was performed using transient heat flux boundary conditions representative of a hydrogen–air RDE across a broad range of coating thermal properties and engine conditions. The coating effectiveness scaled with the product of thermal time constant and detonation wave frequency and the results were non-dimensionalized to guide future materials development. This strategy may offer benefits in increasing material survivability, reducing cooling requirements, and enhancing pressure gain.

heat transfer↗
DOE OSTI2022

Production efficiencies of sound waves in the intracluster medium driven by AGN jets

Feedback from active galactic nuclei (AGNs) is believed to be the most promising solution to the cooling flow problem in cool-core clusters. Dissipation of sound waves is considered as one of the possible heating mechanisms; however, its relative contribution to heating remains unclear. To estimate the energy budget for heating, we perform 3D hydrodynamic simulations of AGN jet injections in a Perseus-like cluster and quantify the amount of energy stored in the forms of weak shocks and waves. For this work, e find that, for a single jet injection with typical parameters in cool-core clusters, ${\sim}9{{\ \rm per\ cent}}$ of the total jet energy is stored in compressional waves (including both shocks and waves). However, due to the destructive effects among randomly phased waves as well as the dissipation of shock energies, in our simulations including self-regulated AGN feedback, no more than $3{{\ \rm per\ cent}}$ of the total injected energy goes into compressional waves. We further separate the energy contribution from shocks and waves and find that, for a single outburst, the shocks can only contribute to ${\sim}20{-}30{{\ \rm per\ cent}}$ of the total compressional energy in the inner radii and quickly dissipate away. In the self-regulated case where shocks are repeatedly generated, shocks completely dominate over sound waves in the inner region and can still provide ${\sim}40{-}50{{\ \rm per\ cent}}$ of the total compressional energy at outer radii. Our results suggest that the production of sound waves is not as efficient as what was previously found, and thus sound wave dissipation may be a subdominant source of heating in cool-core clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Transient heat transfer of superfluid He 4 in nonhomogeneous geometries: Second sound, rarefaction, and thermal layer

Transient heat transfer in superfluid 4 He (He II) is a complex process that involves the interplay of the unique counterflow heat-transfer mode, the emission of second-sound waves, and the creation of quantized vortices. Many past researches focused on homogeneous heat transfer of He II in a uniform channel driven by a planar heater. Here, we report our systematic study of He II transient heat transfer in nonhomogeneous geometries that are pertinent to emergent applications. By solving the He II two-fluid equations of motion coupled with Vinen's equation for vortex-line density, we examine and compare the characteristics of transient heat transfer from planar, cylindrical, and spherical heaters in He II. Our results show that as the heater turns on, an outgoing second-sound pulse emerges, within which the vortex-line density grows rapidly. These vortices attenuate the second sound and result in a heated He II layer in front of the heater, i.e., the thermal layer. In the planar case where the vortices are created throughout the space, the second-sound pulse is continuously attenuated, leading to a thick thermal layer that diffusely spreads following the heat pulse. On the contrary, in the cylindrical and the spherical heater cases, vortices are created mainly in a thin thermal layer near the heater surface. As the heat pulse ends, a rarefaction tail develops following the second-sound pulse, in which the temperature drops. This rarefaction tail can promptly suppress the thermal layer and take away the deposited thermal energy. The effects of the heater size, heat flux, pulse duration, and temperature on the thermal-layer dynamics are discussed. We also show how the peak heat flux for the onset of boiling in He II can be studied in our model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Experimental and theoretical analysis of carbon driven detonation waves in a heterogeneously premixed Rotating Detonation Engine

Coal dust explosions can be hazardous; however, they can also generate a significant rise in stagnation pressure if adequately harnessed. Rotating detonation combustors seek to take advantage of the stagnation pressure rise phenomenon in a more sustained and controlled manner via confinement to a physical annulus, leading to increased overall thermodynamic efficiency. Here this investigation presents an analysis of detonations fueled by Carbon Black, a solid particulate consisting of virtually pure carbon molecules and lean Hydrogen-Air mixtures. It is realized that with the addition of Carbon Black, an increase of lean mixture detonability and detonation velocities extending the operating limit over that of a pure hydrogen-air mixture is experienced. For all testing conditions, the total equivalence ratio is held at φ = 1, while the fuel mixture's carbon mass fraction is increased from 0 to 0.7 while the hydrogen is decreased. Detonation wave velocities are extracted from high-speed imaging through applying a Discrete Fourier Transform algorithm to determine changes to the wave speed as Carbon Black particles are introduced. As a result, due to the addition of Carbon Black as an auxiliary fuel source, detonations were formed instead of deflagrations in operating conditions where one would expect deflagrations at the same hydrogen-air equivalence ratios without Carbon Black addition. The detonation formation provides evidence that the coal particles are reacting within the detonation wave in a large enough capacity to support a detonation wave within the annulus. Furthermore, the wave speed is shown to increase with the additional of carbon particles. At a constant global equivalence ratio, the detonation wave velocities were found to decrease with hydrogen's incremental replacement with coal particles. Whereby, through a theoretical comparison of the heat of combustion as computed from the experimentally derived detonation wave velocities, a linear relationship of the two was shown to exist. Therefore, the heat of combustion has the potential to describe an operational limit to sustaining a detonation wave.

42 ENGINEERING↗
DOE OSTI2021

Observation of second harmonic electron cyclotron resonance heating and current-drive transition during non-inductive plasma start-up experiment in QUEST

Here, noninductive plasma current start-up using 2nd harmonic electron cyclotron resonance heating (ECRH) with oblique radio frequency (RF) injection is demonstrated in a Q-shu University experiment with steady-state spherical tokamak. A strong transition was observed in the heating and plasma current ramp-up. The initial bulk electron heating regime exhibits T ebulk ~ 140 eV and no hard x-ray (HXR) emission with a low I p of ~15 kA; it abruptly transitions to a regime that exhibits a low T ebulk of ~10 eV and a strong HXR emission with a high I p of ~50 kA. This behavior is distinctly different from that observed in previous fundamental ECRH experiments. The mechanism of the heating and current drive transition are investigated considering wave power absorption and plasma power balance. The results indicate that the transition is caused by the favorable heating of tail electrons where the RF power absorption at the 2nd harmonic increases nearly linearly with T etail , while the power transfer from the tail electrons to the bulk electrons decreases with 1/T etail 0.5 . This causes a rapid transition to a state with high T etail while reducing T ebulk towards colder ion temperature. The understanding of the transition mechanism helps to consider plasma current start-up using 2nd harmonic ECRH for tokamak reactors such as JT-60 SA and ITER.

QUEST↗
DOE OSTI2022

Mechanisms behind the Springtime North Pacific ENSO Teleconnection Bias in Climate Models

Previous studies have shown that models overestimate the strength of ENSO teleconnections to the North Pacific during springtime, but the underlying reasons for this bias remain unknown. Here, in this work, the relative contributions from basic-state and thermodynamic/dynamic forcing factors are disentangled through idealized experiments with the Community Earth System Model and a range of stationary wave modeling experiments. It is revealed that in CESM1 the diabatic heating biases over the tropical Indian Ocean and tropical central-western Pacific jointly favor a cyclonic (anticyclonic) circulation bias to occur in the North Pacific during the springtime of El Niño (La Niña) events. On one hand, the difference in the modeled and observed climatological basic state does not lead to the bias formation directly, as the diabatic heating biases are the primary cause. On the other hand, the springtime basic state is conducive to a more vigorous stationary wave response to the biased diabatic heating than the wintertime state, and this explains why the teleconnection bias occurs during springtime but not in winter. An iterative bias-correction approach is then implemented in the atmospheric model component of CESM1 to verify the linkage between the tropical diabatic heating bias and the teleconnection bias. Moreover, this explanation is shown to be relevant in other models of phase 5 of the Coupled Model Intercomparison Project (CMIP5) as a strong relationship is found between biases in ENSO-related tropical central-western Pacific/Indian Ocean precipitation and North Pacific circulation across models in spring.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Real-time capable modeling of ICRF heating on NSTX and WEST via machine learning approaches

Abstract A real-time capable core Ion Cyclotron Range of Frequencies (ICRF) heating model on NSTX and WEST is developed. The model is based on two nonlinear regression algorithms, the random forest ensemble of decision trees and the multilayer perceptron neural network. The algorithms are trained on TORIC ICRF spectrum solver simulations of the expected flat-top operation scenarios in NSTX and WEST assuming Maxwellian plasmas. The surrogate models are shown to successfully capture the multi-species core ICRF power absorption predicted by the original model for the high harmonic fast wave and the ion cyclotron minority heating schemes while reducing the computational time by six orders of magnitude. Although these models can be expanded, the achieved regression scoring, computational efficiency and increased model robustness suggest these strategies can be implemented into integrated modeling frameworks for real-time control applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Remarkable heat conduction mediated by non-equilibrium phonon polaritons

Surface waves can lead to intriguing transport phenomena. In particular, surface phonon polaritons (SPhPs), which result from coupling between infrared light and optical phonons, have been predicted to contribute to heat conduction along polar thin films and nanowires. However, experimental efforts so far suggest only very limited SPhP contributions. Through systematic measurements of thermal transport along the same 3C-SiC nanowires with and without a gold coating on the end(s) that serves to launch SPhPs, here we show that thermally excited SPhPs can substantially enhance the thermal conductivity of the uncoated portion of these wires. The extracted pre-decay SPhP thermal conductance is more than two orders of magnitude higher than the Landauer limit predicted on the basis of equilibrium Bose–Einstein distributions. Here, we attribute the notable SPhP conductance to the efficient launching of non-equilibrium SPhPs from the gold-coated portion into the uncoated SiC nanowires, which is strongly supported by the observation that the SPhP-mediated thermal conductivity is proportional to the length of the gold coating(s). The reported discoveries open the door for modulating energy transport in solids by introducing SPhPs, which can effectively counteract the classical size effect in many technologically important films and improve the design of solid-state devices.

42 ENGINEERING↗
DOE OSTI2021

Interaction of radio frequency waves with cylindrical density filaments: scattering and radiation pressure

The propagation of radio-frequency (RF) waves in tokamaks can be affected by filamentary structures, or blobs, that are present in the edge plasma and the scrape-off layer. The difference in the permittivity between the surrounding plasma and interior of a filament leads to reflection, refraction and diffraction of the waves. This, in turn, can affect the power flow into the core of the plasma and reduce the efficiency of heating and/or current generation. The scattering of RF waves, lower hybrid, helicon and ion cyclotron waves, by a single cylindrical filament, embedded in a background plasma, is studied using a full-wave analytical theory developed previously (Ram & Hizanidis, Phys. Plasmas , vol. 23, 2016, 022504). The theory assumes that the plasma in and around a filament is homogeneous and cold. A detailed scattering analysis reveals a variety of common features that exist among the three distinctly different RF waves. These common attributes can be inferred intuitively based on an examination of the cold plasma dispersion relation. The physical intuition is a useful step to understanding experimental observations on scattering, as well as results from simulations that include general forms of edge plasma turbulence. While a filament can affect the propagation of RF waves, the radiation force exerted by the waves can influence the filament. The force on a filament is determined using the Maxwell stress tensor. In 1905, Poynting was the first to evaluate and measure the radiation force on an interface separating two different dielectric media (Poynting, London Edinburgh Dublin Philos. Mag. J. Sci. , vol. 9, 1905, pp. 393–406). For ordinary light propagating in vacuum and incident on a glass surface, Poynting noted that the surface is ‘pulled’ towards the vacuum. In a magnetized cold plasma, there are two independent wave modes. Even if only one of these modes is excited by an RF antenna, a filament will couple power to the other mode: a consequence of electromagnetic boundary conditions. This facet of scattering has consequences on the radiation force that go beyond Poynting's seminal contribution. The direction of the force depends on the polarization of the incident wave and on the mode structure of the waves inside and in the vicinity of a filament. It can either pull the filament toward the RF source or push it away. For slow lower hybrid waves, filaments with densities greater than the ambient density are pulled in, while filaments with lower densities are pushed out, thereby enhancing the density in front of the antenna. In the case of fast helicon and ion cyclotron waves, the direction of the force depends on the plasma and wave parameters; in particular, on the ambient density. The radiation force, in all three frequency ranges, is large enough to affect the motion of a filament and could be measured experimentally. This also suggests the possibility of modifying the edge turbulence using RF waves.

Physics↗
DOE OSTI2022

Interaction of radio frequency waves with cylindrical density filaments -- scattering and radiation pressure

The propagation of radio-frequency (RF) waves in tokamaks can be affected by filamentary structures, or blobs, that are present in the edge plasma and the scrape-off layer. The difference in the permittivity between the surrounding plasma and interior of a filament leads to reflection, refraction and diffraction of the waves. This, in turn, can affect the power flow into the core of the plasma and reduce the efficiency of heating and/or current generation. The scattering of RF waves, lower hybrid, helicon and ion cyclotron waves, by a single cylindrical filament, embedded in a background plasma, is studied using a full-wave analytical theory developed previously (Ram & Hizanidis, Phys. Plasmas, vol. 23, 2016, 022504). The theory assumes that the plasma in and around a filament is homogeneous and cold. A detailed scattering analysis reveals a variety of common features that exist among the three distinctly different RF waves. These common attributes can be inferred intuitively based on an examination of the cold plasma dispersion relation. The physical intuition is a useful step to understanding experimental observations on scattering, as well as results from simulations that include general forms of edge plasma turbulence. While a filament can affect the propagation of RF waves, the radiation force exerted by the waves can influence the filament. The force on a filament is determined using the Maxwell stress tensor. In 1905, Poynting was the first to evaluate and measure the radiation force on an interface separating two different dielectric media (Poynting, London Edinburgh Dublin Philos. Mag. J. Sci., vol. 9, 1905, pp. 393–406). For ordinary light propagating in vacuum and incident on a glass surface, Poynting noted that the surface is ‘pulled’ towards the vacuum. In a magnetized cold plasma, there are two independent wave modes. Even if only one of these modes is excited by an RF antenna, a filament will couple power to the other mode: a consequence of electromagnetic boundary conditions. This facet of scattering has consequences on the radiation force that go beyond Poynting's seminal contribution. The direction of the force depends on the polarization of the incident wave and on the mode structure of the waves inside and in the vicinity of a filament. It can either pull the filament toward the RF source or push it away. For slow lower hybrid waves, filaments with densities greater than the ambient density are pulled in, while filaments with lower densities are pushed out, thereby enhancing the density in front of the antenna. In the case of fast helicon and ion cyclotron waves, the direction of the force depends on the plasma and wave parameters; in particular, on the ambient density. The radiation force, in all three frequency ranges, is large enough to affect the motion of a filament and could be measured experimentally. This also suggests the possibility of modifying the edge turbulence using RF waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Interpretation of high-harmonic fast-wave propagation in the scrape-off layer of NSTX-U as a geometrically bounded-waveguide mode

This paper revisits the onset of high-harmonic fast-wave (HHFW) propagation in the scrape-off layer (SOL) plasma of the NSTX/NSTX-U spherical tokamak, motivated by past HHFW heating and current drive experiments and modelling. Previously, the fast-wave propagation in the SOL was correlated with the opening (suppression) of the fast-wave right-hand cutoff layer in front of the antenna. In this work, the SOL propagation is interpreted as a geometric waveguide mode guided by the SOL geometry, whose radial width can be comparable to the wave’s perpendicular wavelength in the HHFW regime. A two-dimensional circular model is first employed using full-wave solvers to characterise the poloidal eigenmode structures and to clarify their relationship to annulus resonance. By progressively adding a tokamak-like magnetic-field configuration, starting from a uniform axial field, the effects of magnetic-field gradients and pitch on the SOL waveguide mode are characterised. The poloidal mode numbers supported by the SOL plasma agree well with analytic estimates, indicating that an anisotropic plasma in a bounded geometry selectively supports and amplifies the resonant poloidal mode number. Additionally, two-dimensional axisymmetric NSTX-U simulations demonstrate that the SOL eigenmode features identified in the circular model persist in the experimentally relevant configurations. A control approach based on lengthening the wave perpendicular wavelength relative to the SOL width, including a higher magnetic (B)-field operation, is discussed. The analysis here shows the key role of a bounded geometry in interpreting HHFW eigenmode coupling and propagation in the NSTX-U SOL plasma.

plasma heating↗
DOE OSTI2022

Online Lead/Water Heat Exchanger Sensor/System Feasibility-PNNL (Final Report)

On-line structural health corrosion monitoring in advanced lead fast reactor heat exchangers and molten salt reactor heat exchangers is desirable for detecting tube degradation prior to leaks that may allow mixing of heat exchanger fluids or release of radiological contamination beyond the design containment boundary. This program, On-Line Lead/Water Heat Exchanger Sensor/System Feasibility – PNNL 76092, demonstrates feasibility for an ultrasonic torsional wave mode sensor attached to the outside of a long (30.5-m) heat exchanger tube in the stagnant flow area where the tube joins a heat exchanger plenum and where it is possible to protect a sensor and cable from high-force flows. The sensor must be cable connected to a monitoring instrument near the heat exchanger. The sensor and cable management approach for periodic in-service inspection will be impractical to implement on existing heat exchangers; rather permanently mounted sensors must be installed in conjunction with heat exchanger fabrication. Previous work has shown low-temperature lead zirconate titanate (PZT) piezoceramic sensors are able to detect anomalies of interest in 3.0-m long tubes. These sensors have hereby been extended to a 30.5-m long tube more representative of commercial power heat exchanger designs. The program will continue to investigate higher temperature piezoelectric ceramics and long-term performance of high temperature adhesives and sealants and mechanical pressure coupling for 350-500 °C lead reactor environments and higher temperature (700 °C) molten salt environments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Modeling Microstructural Effects on Heterogeneous Temperature Fields within Polycrystalline Explosives

The paper addresses the role of crystal anisotropy on the evolution of heterogeneous temperature fields in plastic-bonded explosives (PBXs) under conditions of weak shock. The modeling approach is based on simplified idealizations of PBX microstructure including RDX grains and estane binder regions subjected to velocity boundary conditions representative of impact conditions in situ. The constitutive description of the microstructure constituents includes a dislocation-based, anisotropic, single crystal plasticity model for the explosive grains and a linear viscoelastic model to represent the estane binder. Large suites of simulations were used to systematically study the correlation in heating of the grains with local wave dynamics, crystal orientation, and the microstructural neighborhood. These correlations were identified through the selection of characteristics of crystal anisotropy including oriented wave speeds and Taylor factor. A key observation is that the wave dispersion within a certain distance from the impact interface plays a dominant role in the temperature field. Beyond this distance, individual crystal orientations play a more dominant role, but cannot entirely account for the observed heterogeneity without consideration of the local microstructure neighborhood.

42 ENGINEERING↗
DOE OSTI2023

Toward streaked collective Thomson scattering measurements on an extreme ultraviolet plasma light source

Here we show through forward modeling calculations that streaked collective Thomson scattering measurements are feasible on laser-produced tin plasmas generated under conditions relevant for extreme ultraviolet lithography. Using a 532 nm probe laser beam, the feasibility of simultaneous measurements of electron plasma wave (EPW) and ion acoustic wave (IAW) spectra is investigated. Absolute photon counts for laser scattering off both waves are calculated. Probe laser electron heating and bremsstrahlung background radiation effects are accounted for. While a large spatiotemporal region can be successfully probed based on the IAW feature, only one measurement location can be accessed through the EPW as a result of the low signal to noise ratio. A portable/traveling tabletop system is proposed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Proto-neutron star convection and the neutrino-driven wind: implications for the r-process

The neutrino-driven wind from proto-neutron stars is a proposed site for r-process nucleosynthesis, although most previous work has found that a wind heated only by neutrinos cannot produce the third r-process peak. However, several groups have noted that introducing a secondary heating source within the wind can change the hydrodynamic conditions sufficiently for a strong r-process to proceed. One possible secondary heating source is gravito-acoustic waves, generated by convection inside the proto-neutron star. As these waves propagate into the wind, they can both accelerate the wind and shock and deposit energy into the wind. Additionally, the acceleration of the wind by these waves can reduce the total number of neutrino captures and thereby reduce the final electron fraction of the wind. In neutron rich conditions, all of these effects can make conditions more favourable for r-process nucleosynthesis. Here, we present a systematic investigation of the impact of these convection-generated gravito-acoustic waves within the wind on potential nucleosynthesis. We find that wave effects in the wind can generate conditions favourable for a strong r-process, even when the energy flux in the waves is a factor of 10 –4 smaller than the total neutrino energy flux and the wind is marginally neutron rich. Nevertheless, this depends strongly on the radius at which the waves become non-linear and form shocks. We also find that both entropy production after shock formation and the acceleration of the wind due to stresses produced by the waves prior to shock formation impact the structure and nucleosynthesis of these winds.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Demonstration of x-ray fluorescence spectroscopy as a sensitive temperature diagnostic for high-energy-density physics experiments

We present the use of x-ray fluorescence spectroscopy (XFS) to a sensitive temperature diagnostic in shocked foams at temperatures of 30–75 eV. Cobalt-doped foams were shock compressed using a planar drive at the OMEGA laser facility and photo-pumped with a Zn He⁢𝛼 x-ray source. Analysis of the resulting cobalt 𝐾⁢𝛽 x-ray fluorescence spectra using collisional radiative codes allows the temperature to be determined in the shocked foams. Furthermore, this method provides a sensitive and robust technique to determine temperatures in high-energy-density physics experiments in the tens of electronvolts temperature range. In these experiments, we find that radiation hydrodynamic simulations predict a lower temperature in the shocked foams compared to analysis of the XFS data using collisional radiative models. Although additional experiments with an independent temperature diagnostic to absolutely calibrate XFS spectra for these conditions will be required to resolve this discrepancy, these results demonstrate the excellent temperature sensitivity of XFS spectra for high-energy-density physics experiments.

Atomic spectra↗
DOE OSTI2024

Fabrication and testing of the transition section between modules of a wakefield accelerator

The fabrication process is presented for a typical transition section located between each cylindrical corrugated waveguide structure comprising the wakefield accelerator module. The transition section includes couplers for extracting the 180 GHz TM 01 accelerating mode and separate couplers for extracting the 190 GHz HE 11 dipole mode, both modes induced by the electron bunch traversing the cylindrical corrugated waveguide structure. Extraction of the high-power accelerating mode reduces the heat load due to the subterahertz wave power dissipation within the corrugated accelerating structure. Extraction of the low-power dipole mode serves the purpose of detecting the electron bunch transverse oscillations within the wakefield accelerator and identifying the onset of beam breakup instability. Comprehensive testing of the fully functional transition section with an electron beam was done at the Accelerator Test Facility in Brookhaven National Laboratory which verified the functionality of the transition section. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗