Search NASA⌕ Search

SEARCH · Search NASA

Results for “height function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Determination of the auroral O/1S/ production sources from coordinated rocket and satellite measurements

This paper examines the auroral excitation mechanisms using data collected in a satellite/rocket/aurora coordination. Past theories considered that variation with altitude of the emission from the O(1S) state is the same as that from the N2(+) first negative band system. Actually, the source function for O(1S) does not covary with N2(+) but has a smaller scale height. The covariation is due to quenching of the source function by O(3P). The steadiness of the aurora in a flight of the Michigan Airglow Payload allows the profile to be differentiated for direct comparison with theory. It is concluded that when most of the relevant variables for production of the O(1S) state are simultaneously measured in aurora, the major source functions are dissociative recombination of O2(+) above 210 km to apogee at 250 km, and below 180 km the energy transfer from N2(A3sigma) in the oxygen atom quenching reaction.

Sharp, W. E.↗

Improving Carbon Estimation of Large Tropical Trees by Linking Airborne Lidar Crown Size to Field Inventory

Quantifying tropical aboveground biomass (agb) is an outstanding challenge that requires knowledge on the 3D structure of forests. Recent studies suggest that the uncertainty in estimating agb of large trees is significantly reduced if tree height and crown size are accounted for in addition to the traditional trunk diameter and wood density. Due to the fact that field inventory techniques are not adapted to characterize the 3D forest structure, crown size metrics (e.g. height and radius) are commonly estimated as a function of trunk diameter using allometric models with limitations in explaining crown variability. Airborne lidar techniques have the potential for characterizing tree height and crown size but are not adapted to estimate trunk diameter, which is a strong predictor of agb. Here, we investigate the synergy of field inventory and airborne lidar techniques to characterize the forest structure by assessing the uncertainty introduced by the field-based allometric models in the estimation of agb at the tree-level. We focus in 1454 large individual trees (trunk diameter > 60 cm) located within the La Selva Biological Station for which we dispose of field observations (trunk diameter and wood density) and lidar derived metrics (tree height and crown radius). We show that the field-based allometric models overestimate tree height and underestimate crown radius. As a result, the allometric approach overestimates the tree-level agb in 0.8 Mg when considering the 1454 individuals and the errors can reach more than 50% of the agb of individual trees. These errors on the large trees agb highly impact on the plot-level results and then propagate to the estimation of carbon stocks at the regional and national-levels.

Clark, David↗

System distortion errors in radiorespirometry curves.

Description of a method for evaluating the maximum error producible in the system distortion of a carrier gas type radiorespirometer. The maximum producible error is evaluated on the basis of a second order. The maximum producible decrease in peak height output is calculated as a function of the system's time constant or flow rate by using the system's transfer function and the Laplace transformation equation (Gardner and Barnes, 1961).

Neville, E. D.↗

Nonstationary atmospheric boundary layer turbulence simulation

Report on a new and general technique for simulating atmospheric turbulence-like random processes which are statistically homogeneous along the horizontal and nonhomogeneous along the vertical. This technique is general in the sense that it can be used for a broad class of similar problems. Like the other presently available schemes, the techniques presented are based on the Dryden hypothesis and Taylor's frozen eddy hypothesis; however, they go a step further by utilizing certain self-similarity properties of the Dryden spectral density function which permits the development of height invariant filters. These filters are in turn used to generate vertically homogeneous (statistically) random processes from which turbulence at any specified level in the boundary layer can be simulated, thus facilitating the simulation of a nonstationary turbulence process along the flight path of an aircraft during take-off or landing.

Fichtl, G. H.↗

The use of lidar for atmospheric measurements

The present work discusses basic lidar theory and the analysis of lidar return signals in tropospheric and stratospheric measurements. An example of the determination of water vapor mixing height through aerosol and molecular scattering functions is given.

Mccormick, M. P.↗

Large Scale Rossby Waves During FGGE

The purpose was to explore the behavior and significance of global-scale rotational normal modes (free Rossby waves) in the atmosphere. Although these modes received a great deal of attention n the past, the lack of accurate global data severely hampered efforts at estimating the amplitudes and time dependence of these waves in the real atmosphere. With the First GARP Global Experiment, the availability of accurate data that is truly global in coverage presents an important opportunity for a better understanding of the role of Rossby waves in the atmosphere. In the results presented, emphasis is placed on the temporal evolution of the amplitude and phase of the Rossby waves, rather than on characteristics of the time spectra of these waves. The first steps of the analysis consisted of projecting the 500 mb height and wind data onto Hough functions for each synoptic time. The seasonal cycle and time mean were removed separately for each season, and all remaining eastward propagating components removed on a seasonal basis; all remaining westward propagating components were retained.

Lindzen, R. S.↗

Lithologic and Structural Control on Slope Morphology in the Valles Marineris

Throughout the Valles Marineris scarp morphology varies as a function of lithology, structure and scarp height. In addition lithology is an important control on permeability and the relative importance of spring sapping processes. Geomorphic mapping of distinct subareas can be used to define the characteristic scarp forms. Distinct morphologic zones defined on the basis of regional variations in lithology are described. Lithology and tectonic history are shown to be the two most important factors controlling slope development. Regional variation in scarp morphology can be correlated with the orientation and density of fracture systems; scarp height and the presence of rejuvenated fault scarps; and the thickness and degree of exposure of presumably less competent, more permeable, water saturated crated plateau material in the chasmata scarps.

Patton, P. C.↗

Another look at North Sea pole tide dynamics

The mechanism proposed by Wunsch (1974) to explain pole tide observations in the North Sea is evaluated. Wunsch's equations governing pole tide in the North Sea are presented, and solutions for correcting the depth, stream function, and deviation of the tidal height from the equilibrium values are described. The similarity between the Stokes paradox and the tidal equations of the North Sea, and the need for inclusion of inertial terms in the tidal equations are discussed.

Dickman, S. R.↗

Spaceborne laser ranging from EOS

High precision laser ranging measurements from an Earth Observing System (EOS) platform would provide data for conducting a variety of basic geoscience investigations. For example, range data to retroreflectors arranged in grids located at tectonic plate boundaries could be used to study the spatial and temporal distribution of the crustal movements associated with stress accumulation and release in an earthquake cycle. The Geodynamics Laser Ranging System (GLRS) is a proposed facility instrument for EOS that can perform the ranging function as well as simple height-measurement altimetry over ice sheets. This instrument is the derivative of several generations of ground-based laser trackers and prototype laboratory systems. The Geoscience Laser Altimetry/Ranging System (GLARS) is an advanced laser ranging system which would provide higher accuracy ranging observations and detailed altimetric mapping of surface height distributions over land and ice sheets.

Cohen, Steven C.↗

Calculated nighttime eastward plasma drift velocities at low latitudes and their solar cycle dependence

After calculating ambient electron densities as a function of altitude, latitude and local time, a simplified expression is used to calculate F-region eastward plasma drifts given a zonal neutral wind model. The derived eastward plasma drift on a magnetic flux tube is examined as a function of the flux tube apex height. If the neutral wind is assumed to be independent of latitude the plasma drift maximizes along the flux tube which intercepts the F-region peak concentration at the Appleton anomaly. Above this altitude the velocity decreases to reflect a decrease in the flux tube integrated F-region Pedersen conductivity. For a latitude dependent wind the plasma drift tends to maximize along the flux tube which intercepts the F-peak at the dip equator. Above this altitude the drift decreases to reflect the latitude distribution of the wind.

Anderson, D. N.↗

Studies of ionospheric plasma and electrodynamics and their application to ionosphere-magnetosphere coupling

The contribution of the Dynamics Explorer (DE) program to the study of small-scale structure in the equatorial ionospheric number density and the bulk motion of the plasma in the equatorial ionosphere is considered. DE results have helped elucidate the role of E region and F region winds in decreasing the magnitude of variations in the east-west plasma drift at night, as a function of magnetic flux tube apex height, with increasing height above the altitude of the peak F region concentration. Other results concern the ionospheric convection pattern at high latitudes during periods of southward IMF, the magnetosphere/solar-wind interaction that may be involved in the production of the convection pattern, and the characteristics of the high-latitude ionospheric plasma motion during periods of northward IMF.

Heelis, R. A.↗

Measurements of the vertical profile of water vapor abundance in the Martian atmosphere from Mars Observer

An analysis is presented of the Pressure Modulator Infrared Radiometer (PMIRR) capabilities along with how the vertical profiles of water vapor will be obtained. The PMIRR will employ filter and pressure modulation radiometry using nine spectral channels, in both limb scanning and nadir sounding modes, to obtain daily, global maps of temperature, dust extinction, condensate extinction, and water vapor mixing ratio profiles as a function of pressure to half scale height or 5 km vertical resolution. Surface thermal properties will also be mapped, and the polar radiactive balance will be monitored.

Schofield, J. T.↗

Electron density profile description in the international reference ionosphere

Problems encountered during efforts to reformulate the IRI description of the electron density profile are examined. Consideration is given to Booker's (1979) proposal that the unique, analytic profile functions should cover the entire ionospheric height range. The IRI topside model is reviewed and the electron density profile of the middle and lower ionosphere are discussed. Rawer's (1983) procedure for combining the topside, middle, and lower ionospheric profiles into one analytic profile is reviewed.

Rawer, K.↗

Aircraft- and tower-based fluxes of carbon dioxide, latent, and sensible heat

Fluxes of carbon dioxide, water vapor, and sensible heat obtained over a grassland ecosystem, during the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE), using an aircraft- and two tower-based systems are compared for several days in 1987 and in 1989. The tower-based cospectral estimates of CO2, sensible heat, water vapor, and momentum, expressed as a function of wavenumber K times sampling height z, are relatively similar to the aircraft-based estimates for K x z greater than 0.1. A measurable contribution to the fluxes is observed by tower-based systems at K x z less than 0.01 but not by the aircraft-based system operating at an altitude of approximately 100 m over a 15 x 15 km area. Using all available simultaneous aircraft and tower data, flux estimates by both systems were shown to be highly correlated. As expected from the spatial variations of the greenness index, surface extrapolation of airborne flux estimates tended to lie between those of the two tower sites. The average fluxes obtained, on July 11, 1987, and August 4, 1989, by flying a grid pattern over the FIFE site agreed with the two tower data sets for CO2, but sensible and latent heat were smaller than those obtained by the tower-based systems. However, in general, except for a small underestimation due to the long wavelength contributions and due to flux divergence with height, the differences between the aircraft- and tower-based surface estimates of fluxes appear to be mainly attributable to differences in footprint, that is, differences in the area contributing to the surface flux estimates.

Desjardins, R. L.↗

Gas kinematics and ionization along the extended sight line to HD 116852

We present Goddard High-Resolution Spectrograph intermediate observations of the interstellar medium toward HD 116852, a low halo star at a distance of 4.8 kpc (z = -1.3 kpc) in the direction l = 304. deg 9, b = 16.deg 1. The small science aperture observations have signal-to-noise ratios ranging from 30 to 90 and resolutions of 11 to 18 km/s (FWHM). We confirm the optical MK classification of this star through an analysis of its ultraviolet photosperic and stellar wind profiles. We detect interstellar lines of Al III, Si IV, C IV, and N V together with lines of C I, C I*, C I**, Si II, Ge II, P II, and Ni II. We convert the Mg II, P II, S II, Al III, Si IV, C IV, and N V profiles into measure of apparent column density as a function of LSR velocity. Gas scale height, velocity dispersion, and differential Galactic rotation effects govern the profile shapes. A simple computer model of the expected sight line column density profiles for the low and high ion species indicates that the gas velocity dispersions and scale heights increase as the ionization level of the gas increases. We find scale heigts H greater than or = 1 kpc for the high ions, which are comparable to the z-distance of the star, whereas we find H approximatley = 0.6 to 0.7 kpc for A1 III and H approximatley 0.1 kpc for P II and Ge II. An enhancement in the Al II profile near -15 km/s accounts for approximately 25% of the A1 III column along the sight line and probably arises within gas located approximately 500 pc below the Sagittarius-Carina spiral arm link. Portions of the broad underlying A1 III distribution are associated with the higher ionization lines, perhaps in conductive interfaces. The presence of N V and the column density ratios of Si IV, C IV, and N V favor the interpretation that much of the high ion absorption is produced by collisional ionization in gas with T = 1-3 x 10(exp 5) K. An enhancement near -35 km/s in both the Si IV and C IV profiles may be due to an outflow from the Norma spiral arm at a z-distance of about -1 kpc. The smooth decrease of the N(C IV)/N(Si IV) ratio at negative velocities may be due to an ISM ionization structure for hot gas that changes distance from the Galactic plane or to a two phase gas distribution in which the relative contribution from each phase changes with distance from the Galactic plane.

Sembach, Kenneth R.↗

Self-Consistent Magnetosphere-Ionosphere Coupling: Theoretical Studies

A self-consistent ring current (RC) model has been developed that couples electron and ion magnetospheric dynamics with the calculation of the electric field. Two new features were taken into account in order to close the self-consistent magnetosphere- ionosphere coupling loop. First, in addition to the RC ions, we solve an electron kinetic equation in our model. Second, using the relation of Galand and Richmond [2001], we calculate the height integrated ionospheric conductances as a function of the precipitated high energy magnetospheric electrons and ions that are produced by our code. To validate the results of our model we simulate the magnetic storm of May 2, 1986, a storm that has has been comprehensively studied, and compare our results with different theoretical approaches. The self-consistent inclusion of the hot electrons and, their effect on the conductance results in deeper penetration of the magnetospheric electric field. In addition, a slight westward rotation of the potential pattern (compared to previous self-consistent results) is evident in the inner magnetosphere. This changes the hot plasma distribution, especially by allowing increased access of plasma sheet ions and electrons to low L shells.

Khazanov, G. V.↗

Self-Consistent Magnetosphere-Ionosphere Coupling and Associated Plasma Energization Processes

Magnetosphere-Ionosphere (MI) coupling and associated with this process electron and ion energization processes have interested scientists for decades and, in spite of experimental and theoretical research efforts, are still ones of the least well known dynamic processes in space plasma physics. The reason for this is that the numerous physical processes associated with MI coupling occur over multiple spatial lengths and temporal scales. One typical example of MI coupling is large scale ring current (RC) electrodynamic coupling that includes calculation of the magnetospheric electric field that is consistent with the ring current (RC) distribution. A general scheme for numerical simulation of such large-scale magnetosphere-ionosphere coupling processes has been presented earlier in many works. The mathematical formulation of these models are based on "modified frozen-in flux theorem" for an ensemble of adiabatically drifting particles in the magnetosphere. By tracking the flow of particles through the inner magnetosphere, the bounce-averaged phase space density of the hot ions and electrons can be reconstructed and the magnetospheric electric field can be calculated such that it is consistent with the particle distribution in the magnetosphere. The new a self-consistent ring current model has been developed that couples electron and ion magnetospheric dynamics with calculation of electric field. Two new features were taken into account in addition to the RC ions, we solve an electron kinetic equation in our model, self-consistently including these results in the solution. Second, using different analytical relationships, we calculate the height integrated ionospheric conductances as the function of precipitated high energy magnetospheric electrons and ions as produced by our model. This results in fundamental changes to the electric potential pattern in the inner magnetosphere, with a smaller Alfven boundary than previous potential formulations would predict but one consistent with recent satellite observations. This leads to deeper penetration of the plasma sheet ions and electrons into the inner magnetosphere and more effective ring current ions and electron energization.

Khazanov, G. V.↗

Progress Toward Generation of a Navier-Stokes Database for a Harrier in Ground Effect

The Harrier YAV-8B aircraft is capable of vertical and short-field take-off and landing (V/STOL) by directing its four exhaust nozzles toward the ground, or conventional flight by rotating its nozzles into a horizontal position. The British Royal Air Force and the United States Marine Corps have used this aircraft for more than 30 years to provide a quick reaction time for troop support, and reduce the need for long runways. The success of this powered-lift (PL) vehicle has also prompted the more recent design of the Joint Strike Fighter (JSF). However there are significant safety issues that must be addressed when operating a PL vehicle in close proximity to the ground. Hot Gas Ingestion (HGI) by the inlets can result in a rapid loss of powered lift; and high-speed jet flows along the ground plane can induce low pressures underneath the vehicle, causing a 'suck-down' effect. Under these conditions, departure from controlled flight may occur. Moreover, unsteady ground vortices and jet fountains can affect the aircraft,s controllability and its proximity to ground troops. The viscous, time-dependent flow fields of PL vehicles are difficult to accurately and efficiently predict using Computational Fluid Dynamics (CFD). A number of researchers have used the time-dependent Reynolds-averaged Navier-Stokes (RANS) equations to compute flows for single and multiple jets in a cross-flow. A few have added some geometric complexity to the problem by computing flows for jet-augmented delta wings near a ground plane. Smith et.al. computed for the first time a single RANS solution about a simplified Harrier. This geometry included a fuselage, wing, leading edge root extension (LERX), inlets, and exhaust nozzles. All of these investigations cite two practical problems with computing these flows: 1) the need for improved solution accuracy; and, 2) the need for faster solution methods. We view the need for faster solution methods as key to improving the solution accuracy and making this class of computation more routine. One can hardly refine grids, explore the use of advanced turbulence models, and generate databases when it takes weeks of dedicated computer time for a single solution. Chaderjian, Ahmad, Pandya, and Murman have focused on reducing the time-to-solution for this very difficult and complex problem through process automation and exploitation of parallel computing. They began with the Harrier geometry reported, and added a deflected wing flap and empennage for greater realism. To date more than 80 solutions have been carried out. This paper will describe this process and progress made in reducing the time required to generate a simple longitudinal force and moment database for a Harrier in ground effect. It shows a typical snap-shot from an unsteady streakline animation, where fluid particles are colored by temperature. The ground vortex and a jet-fountain vortex are highlighted. It also shows a similar streakline image, where HGI occurs due to the vehicle in close proximity to the ground. It is show the mean lift coefficient as a function of angle of attack and height. The angle of attack range was 4 deg less than or = alpha less than or = 10 deg with an increment of 1 degree, and the height range was 10 ft less than or = h less than or = 30ft with an increment of 5 feet. This 35 solution database was extended to over 2500 cases using a monotone cubic-spline interpolation procedure. The suck-down effect (reduction of lift near the ground) is highlighted in the figure. The "cushion effect," the conventional reduction of lift as the vehicle moves out of ground effect, is also indicated. All 35 RANS solutions were obtained using 952 Silicon Graphics Origin 2000 and 3000 processors in dedicated mode for one week. Typically, 112 processors were assigned to each case. Some other cases used fewer processors to utilize all available CPUS. The final paper will report on the automation of the solution process, including: grid generation, job monitoring, solution completion criteria, and post processing. Moreover, improvements in parallel efficiency for a dual time-step algorithm for the RANS equations will also be presented. Results will be discussed in detail using unsteady streakline flow visualization to correlate unsteady flow structures with dominant aerodynamic frequencies. The stability derivatives, CL, and CL, will also be presented.

Chaderjian, Neal M.↗