Search NASA⌕ Search

SEARCH · Search NASA

Results for “high capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Proton-Mediated and Ir-Catalyzed Iron/Iron-Oxide Redox Kinetics for Enhanced Rechargeability and Durability of Solid Oxide Iron–Air Battery

Long duration energy storage (LDES) is an economically attractive approach to accelerating clean renewable energy deployment. The newly emerged solid oxide iron–air battery (SOIAB) is intrinsically suited for LDES applications due to its excellent low-rate performance (high-capacity with high efficiency) and use of low-cost and sustainable materials. However, rechargeability and durability of SOIAB are critically limited by the slow kinetics in iron/iron-oxide redox couples. Here the use of combined proton-conducting BaZr 0.4 Ce 0.4 Y 0.1 Yb 0.1 O 3 (BZC4YYb) and reduction-promoting catalyst Ir to address the kinetic issues, is reported. It is shown that, benefiting from the facilitated H + diffusion and boosted FeOx-reduction kinetics, the battery operated under 550 °C, 50% Fe-utilization and 0.2 C, exhibits a discharge specific energy density of 601.9 Wh kg –1 -Fe with a round-trip efficiency (RTE) of 82.9% for 250 h of a cycle duration of 2.5 h. Under 500 °C, 50% Fe-utilization and 0.2 C, the same battery exhibits 520 Wh kg –1 -Fe discharge energy density with an RTE of 61.8% for 500 h. This level of energy storage performance promises that SOIAB is a strong candidate for LDES applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Investigations on the effect of current density on SiO/Si composite electrodes

An oxide layer on the surface of silicon particles is inevitable and is necessary for their application as anode materials for lithium ion batteries with high capacity and durability. However, a thick surficial oxide layer could significantly reduce the capacity of a Si anode. Here, Si nanoparticles with a thick surficial oxide layer of ~20 nm (Si@SiO x ) were fabricated through thermal oxidation and investigated electrochemically. The results revealed that very low current density is needed to activate Si@SiO x anodes during the first formation cycle. Once activated, the Si@SiO x anode can deliver reversible capacity as high as ~1000 mAh/g with low current density. Then, the Si@SiO x can be cycled at higher current densities of >700 mAh/g. Electrochemical impedance spectroscopy (EIS) shows that the lower current density results in lower charge-transfer resistance of the Si@SiO x anode, suggesting a higher degree of lithiation of the surficial oxide layer during low-current activation. EIS analysis also reveals that the lithiation of the surficial oxide is irreversible. We believe that the surface silicon oxide layer is lithiated and forms lithium silicate during the initial activation process. Lithium silicate has high conductivity and allows the lithiation/delithiation of Si core under the oxide layer during following charge and discharge.

25 ENERGY STORAGE↗
DOE OSTI2023

xLi2MnO3 (1-x)LiMeO2 and Li4Ti5O12 Cell Chemistry for Behind-the-Meter Storage Applications

Li- and Mn-rich layered oxide material (xLi2MnO3 (1-x)LiMeO2, Me = Ni, Mn, and etc., LMR-NM) is paired with Li4Ti5O12 (LTO) in a full cell and evaluated for the Behind-the-Meter Storage (BTMS) applications. The LMR-NM/LTO full cell shows very high capacities and excellent long-term cycle life. It delivers 192 mAh g-1 after 500 cycles at C/2 and 45 degrees C with a capacity retention of 75% and coulombic efficiency higher than 99.95%. It also has impressive rate capabilities. A capacity of 220 mAh g-1 is achieved at 2C which is 88 % of the initial capacity at C/10. The high cycling temperature clearly enhances electrochemical kinetics and activates more Li2MnO3 component, which gives high capacities, low cell impedance, and better rate capabilities. Moreover, it helps to form a relatively thick cathode-electrolyte interphase (CEI) film to suppress transition metal dissolution from the cathode surface. The upper cut-off voltage (UCV) of 3.0 V keeps the structural integrity of the cathode during cycling. A higher UCV of 3.2 V accelerates structural instabilities of the cathode as well as growth of the solid-electrolyte interphase (SEI) via transition metal dissolution and deposition on the anode surface. It results in higher cell impedance, worse capacity retention and faster capacity fade.

behind-the-meter storage↗
DOE OSTI2021

Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage

We report the ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate source. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE “baskets,” we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Coal-derived carbon anodes for lithium-ion batteries: Development, challenges, and prospects

Lithium-ion battery (LIB) development has increased rapidly, requiring low-cost anode materials with a high capacity, high-rate performance, and stable lifespan. Carbon-based anodes possess various exceptional morphologies and structures, making them promising candidates for meeting the technical demands; however, conventional synthetic carbon anode processes need expensive feedstocks that increase anode cost and limit commercialization. Coal, the most affordable and abundant carbon resource, has attracted increasing attention as the primary feedstock for producing high-value carbon anode materials. This article reviews the lithium storage mechanisms, characteristics, and productions of some high-valuable carbon anode materials for LIBs from coal and coal derivatives. The high-value carbon anode materials reviewed in this article are graphite, graphene, mesophase microbeads (MCMB), carbon fiber, and hard carbons. Furthermore, the remaining challenges and prospects of using coal-derived carbon materials to create high-performance and low-cost lithium-ion batteries are also discussed.

25 ENERGY STORAGE↗
DOE OSTI2020

Separation characteristics of cations and natural organic matter in electrodialysis

Natural organic matter (NOM) in water can cause the formation of disinfection byproducts (DBPs) when NOM reacts with a disinfectant such as chlorine. Nanofiltration (NF) and reverse osmosis (RO) are effective treatment methods to remove NOM. However, the simultaneous presence of both NOM and divalent cations such as Ca 2+ can enhance fouling in NF and RO. Therefore, an appropriate pretreatment to remove such cations before NF or RO would delay fouling and perhaps improve water recovery and NOM removal efficiency. Electrodialysis (ED) is potentially an excellent pretreatment method because it separates inorganic ions well using ion exchange membranes (IEMs) but does not separate NOM well because of its size and consequent low diffusivity. This research focused on ion and NOM separation with ED using three different types of commercially available IEM pairs, two different commercially available NOM sources, and six different influents at 500 mg/L total dissolved solids in the presence or absence of both hardness (Ca 2+ and Mg 2+ ) and NOM. The target waters of interest in this research were drinking water supplies that require little or no desalination but substantial removal of NOM; after NOM separation in NF or RO, some or all of the ED concentrate can be added to the NF/RO permeate to create the finished water prior to disinfection. The results indicate that ED can effectively separate alkaline earth metal ions without separation of NOM. Cation exchange membranes with high exchange capacity, high selectivity for divalent cations are desirable, and both anion and cation exchange membranes should have low affinity for organic adsorption. As a result, the process would work particularly well for NOM with relatively low hydrophobicity, since NOM adsorption to most surfaces increases with hydrophobicity.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Exploring solvation structure and transport behavior for rational design of advanced electrolytes for next generation of lithium batteries

The efficacy of electrolytes significantly affects battery performance, leading to the development of several strategies to enhance them. Despite this, the understanding of solvation structure remains inadequate. It is imperative to understand the structure–property–performance relationship of electrolytes using diverse techniques. Here, this review explores the recent advancements in electrolyte design strategies for high capacity, high-voltage, wide-temperature, fast-charging, and safe applications. To begin, the current state-of-the-art electrolyte design directions are comprehensively reviewed. Subsequently, advanced techniques and computational methods used to understand the solvation structure are discussed. Additionally, the importance of high-throughput screening and advanced computation of electrolytes with the help of machine learning is emphasized. Finally, future horizons for studying electrolytes are proposed, aimed at improving battery performance and promoting their application in various fields by enhancing the microscopic understanding of electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2024

Nested Pebble Bed Blanket (NesPeB)

Recent advances in magnetic confinement fusion technology have attracted billions of dollars of investments in startups from venture capitals and corporations, resulting in the development of devices aiming to demonstrate net energy gain in a self-heated burning plasma, such as SPARC (under construction) and others. However, future fusion power plants must operate in regimes that will require technologies far beyond current experience. According to a National Academies of Science, Engineering, and Medicine report, to have nuclear fusion power plants contributing in a timely manner to the planned reduction of atmospheric carbon dioxide, a pilot plant should be built by 2035, and it should demonstrate fusion power production and the performance of the tritium fuel system (requiring a high enough tritium breeding) by 2040. A recognized key technology gap by [26] is the fusion first wall and blanket since no current blanket concept is considered satisfactory or has been built and proven. The first wall and blanket in magnetic fusion reactors form a vital and complex system, as it must satisfy different functions such as power extraction, tritium breeding, plasma containment, radiation shielding, and safety. The list of design requirements is even longer: high enough tritium production for fusion self-sufficiency, low material activation, decay heat and shutdown dose rates, high thermal efficiency, high-capacity factor, high magnets-divertor-vacuum vessel-first wall life, low corrosion, low cost, and intrinsically safe (requiring minimal licensing). Despite fifty-plus years of research, the first wall and blanket concepts proposed suffer from fundamental technical problems and immaturity (TRL=2-3) that jeopardize the timely delivery of a commercial fusion power plant. A fusion first-wall blanket has never been built nor tested, and a "winning", practical functioning design requires enough engineering margins (high enough tritium breeding considering the uncertainty, etc.), manufacturing simplicity, ease of continuous operation, maintenance, and low cost. A new, groundbreaking blanket concept called "Nested Pebble Bed Blanket" (NesPeB) was developed at ORNL under the successful ARPA-E GAMOW FERMI project (patent application allowed by the USPTO). The NesPeB blanket concept addresses current blanket concepts' shortcomings and technical immaturity, paving the way for accelerated delivery of fusion power plants. NesPeB is based on nested pebbles, which are binary-sized lithium-ceramic pebbles enclosed in "Beryllide" perforated and coated spherical shells, which are also binary-sized, stacked on top of each other, forming a "bed" and cooled by Nitrogen gas also "sweeping" the Helium and Tritium generated by the neutron irradiation of Lithium; the vacuum vessel plasma facing material is Molybdenum-96 and -97 with the first wall cooled by Helium while the divertor armor is made of Tungsten. The simulations of the NesPeB blanket using Fusion Reactors Models Integrator (FERMI) are encouraging as they estimate a tritium breeding ratio (TBR) greater than 1.2 using natural Lithium, acceptable pressure drop, and excellent heat transfer properties. Furthermore, the NesPeB blanket is not limited by magneto-hydro-dynamics (MHD) effects, is designed for online refueling, relies on existing tritium extraction technologies, has a simple construction, and limits the corrosion and chemical reactivity problems. NesPeB has the potential to be transformational and disruptive since it can solve all the main, challenging technical problems of fusion device blankets and accelerate a pilot plant delivery for 10 or more years.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Membrane Electrode Assembly Manufacturing Automation Technology for the Electrochemical Compression of Hydrogen: Cooperative Research and Development (Final Report)

Electrochemical compression has the possibility to outcompete mechanical compression for hydrogen end- use applications. While HyET has a compressor that can output JO kilograms (kg)/day (fully scalable from home-to-industrial application) at up to 700 bar, the energy demand and reliability require top-quality electrochemical hydrogen compression (EHC) membrane electrode assemblies (MEAs), preferably prepared by cost-effective high-capacity manufacturing. High pressure requires a special MEA design, deviating from typical proton exchange membrane fuel cell (PEMFC) MEAs with adapted catalyst layer substrates, asking for a modified coating process. The National Renewable Energy Laboratory (NREL) will help HyET by developing an automated catalyst coating process fit for EHC MEA manufacturing. In addition, inline quality inspection methods will be developed/selected to improve the MBA quality as it is used for EHC stack assembly. In a joint effort, NREL and HyET will even design an automated manufacturing process for the EHC MEA and approach potential United States (US) suppliers of manufacturing equipment.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1977

Rocketdyne's advanced coal slurry pumping program

The Rocketdyne Division of Rockwell International Corporation is conducting a program for the engineering, fabrication, and testing of an experimental/prototype high-capacity, high-pressure centrifugal slurry feed pump for coal liquefaction purposes. The abrasion problems in a centrifugal slurry pump are primarily due to the manner in which the hard, solid particles contained in the slurry are transported through the hydraulic flow passages within the pump. The abrasive particles can create scraping, grinding, cutting, and sandblasting effects on the various exposed parts of the pump. These critical areas involving abrasion and impact erosion wear problems in a centrifugal pump are being addressed by Rocketdyne. The mechanisms of abrasion and erosion are being studied through hydrodynamic analysis, materials evaluation, and advanced design concepts.

Davis, D. E.↗
NASA NTRS1992

Primary zinc-air batteries for space power

Prismatic HR and LC cells and batteries were built and tested, and they performed well with respect to the program goals of high capacity and high rate capability at specific energies. The HR batteries suffered reduced utilizations owing to dryout at the 2 and 3 A rates for the 50 C tests owing to the requirement for forced convection. The LC batteries suffered reduced utilizations under all conditions owing to the chimney effect at 1 G, although this effect would not occur at 0 G. An empirical model was developed which accurately predicted utilizations and average voltages for single cells, although thermal effects encountered during battery testing caused significant deviations, both positive and negative, from the model. Based on the encouraging results of the test program, we believe that the zinc-air primary battery of a flat, stackable configuration can serve as a high performance and safe power source for a range of space applications.

Bragg, Bobby J.↗
NASA NTRSDate not supplied

Optimization Considerations for Annular Linear Electromagnetic Pumps for Space Nuclear Power and Propulsion

The Need for High Performance Liquid Metal Pumps Testing Power and Efficiency Considerations Liquid metal cooled reactors is one option for space nuclear power for settlements and electric propulsion vehicles (Snap 10 A, SP100, Soviet Topaz reactors) • High heat capacity • High boiling point (NaK~1200K) • Simplified heat transfer loop • Good neutronics Liquid metal EM pumps are desired over conventional pumps owing to lack of seals, bearings elimination of cavitation issues, lower mass and eliminates mechanical impeller • Conduction pumps (typically DC-high current, low voltage; ~5% efficiency) • Induction pumps (typically AC, high efficiency ~40%) Annular linear induction pump is an EM pump with no moving parts and of cylindrical/tubular geometry which makes it straightforward to integrate in conventional piping architectures • Higher inherent reliability • Invented by Einstein and Szilard

ALIP↗
DOE OSTI2023

Runtime extension for neural network training with heterogeneous memory

Systems, apparatuses, and methods for managing buffers in a neural network implementation with heterogeneous memory are disclosed. A system includes a neural network coupled to a first memory and a second memory. The first memory is a relatively low-capacity, high-bandwidth memory while the second memory is a relatively high-capacity, low-bandwidth memory. During a forward propagation pass of the neural network, a run-time manager monitors the usage of the buffers for the various layers of the neural network. During a backward propagation pass of the neural network, the run-time manager determines how to move the buffers between the first and second memories based on the monitored buffer usage during the forward propagation pass. As a result, the run-time manager is able to reduce memory access latency for the layers of the neural network during the backward propagation pass.

Mappouras, Georgios↗
DOE OSTI2022

Multi-Physics Coupled Seismic Safety Analysis of Molten-Salt Reactors

Pool-type Molten Salt Reactors (MSRs) are a promising advanced nuclear reactor concept relying on passive physical behavior to provide increased safety characteristics. The high heat capacity, high boiling point, unpressurized liquid salt contains the nuclear fuel and as it passes through the vessel achieves criticality and produces nuclear power. The salt then carries away the heat produced along with the delayed neutron precursors towards heat exchangers and primary pumps before entering the core. This forms a highly coupled multiphysics problem between neutronics and fluid flow, which makes modeling these reactors challenging. The safety/licensing case heavily relies on modeling and simulation to prove their safety, and significant effort has been expanded by the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to develop the appropriate simulation tools. Their safety/licensing will require a thorough analysis of their behavior during earthquake-based transients. Earthquakes are a transient condition commonly experienced in many regions, and are safely survived by dozens of reactors every year. Nonetheless, significant conservatisms were introduced with limited predictive modeling and simulation available. The first-of-a-kind capability developed by this research will allow for engineers to analyze ranges of design-basis and beyond-design basis accident scenarios to assess the integrity of the reactor vessel and surrounding system, possibly allowing for limiting the costly conservatisms in the design. This projects uses MASTODON, Griffin, and Pronghorn in the NEAMS ecosystem to model the coupled multiphysics problem posed by an earthquake in a molten salt reactor. It marches through a number of number of coupling schemes, from uncoupled simulations to tightly two-way coupled simulations. The appropriate level of coupling for these simulations will then be determined based on the accuracy in the quantities of interest (QoI) and computational effort involved in each scheme. The QoIs chosen for this paper include the mass flow rate across the heat exchanger (for Pronghorn simulations), power output of the reactor (for Griffin simulations), and the maximum Von Mises stress (for MASTODON simulations). This summary paper reports on the current progress of this project, with 2D tightly coupled multiphysics results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

A Strategy for Constructing Pore-Space-Partitioned MOFs with High Uptake Capacity for C 2 Hydrocarbons and CO 2

Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4, 4'-dipyridylsulfide (dps) ligands. As a result, one third of open metal sites in the parent acs net are retained in pacs MOFs, while two thirds are used for pore space partition. The newly synthesized Co 2 V-pacs MOFs, with optimized pore space and open metal sites, exhibit near or at record high uptake capacities for C 2 H 2 , C 2 H 4 , C 2 H 6 , and CO 2 among MOFs. For example, the storage capacity of C 2 H 2 is 234 cm 3 /g -1 (298 K) and 330 cm 3 /g -1 (273K) at 1 atm for CPM-733-dps (the Co 2 V-BDC form, BDC=1,4-benzenedicarboxylate), higher than benchmark MOFs such as MOF-74 and all other pacs members. These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C 2 H 2 adsorption capacity following multiple adsorption–desorption cycles.

25 ENERGY STORAGE↗
DOE OSTI2020

A Strategy for Constructing Pore‐Space‐Partitioned MOFs with High Uptake Capacity for C 2 Hydrocarbons and CO 2

Abstract Introduction of pore partition agents into hexagonal channels of MIL‐88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′‐dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore‐space partition. The Co 2 V‐pacs MOFs exhibit near or at record high uptake capacities for C 2 H 2 , C 2 H 4 , C 2 H 6 , and CO 2 among MOFs. The storage capacity of C 2 H 2 is 234 cm 3 g −1 (298 K) and 330 cm 3 g −1 (273 K) at 1 atm for CPM‐733‐dps (the Co 2 V‐BDC form, BDC=1,4‐benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low‐energy‐cost adsorbent regeneration. CPM‐733‐dps is stable and shows no loss of C 2 H 2 adsorption capacity following multiple adsorption–desorption cycles.

Wang, Yong↗
DOE OSTI2022

A Bilayer Electrolyte Design to Enable High-Areal-Capacity Composite Cathodes in Polymer Electrolytes Based Solid-State Lithium Metal Batteries

High-areal-capacity cathodes are needed for energy-dense solid-state batteries. Here, we demonstrate a bilayer polymer electrolyte design for cycling 3–6 mAh/cm 2 NMC811 composite cathodes. In this work, the bilayer electrolyte comprises a cross-linked poly(ethylene oxide) (PEO)-based electrolyte layer and a linear-PEO-based electrolyte layer. The former provides dendritic resistance, and the latter provides a seamless interface with the cathode during cycling. Using a single layer of either membrane led to severe shorting or extremely low Coulombic efficiency (CE) in the first cycle. The general concept of a rigid dendrites-inhibiting electrolyte facing Li anode and a softer, cathode-integrated electrolyte that ensures contact with the cathodes during cycling may present a pattern for enabling high-energy-density cathodes.

25 ENERGY STORAGE↗