SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Polyurethane foam encapsulation techniques for maintaining constant atmosphere and providing mechanical protection against high voltage breakdown in spacecraft ion propulsion systems
Coolant gas extinguishes arcing across the break in a heater element. Air-gap shunt which bypasses high voltage impressed across the circuit prevents damage if the resistance elements break and open the inductive circuit.
Grounding device insertion in wire termination cabinets and terminal block modification prevent lightning-induced high voltage transients from reaching inputs or outputs of solid state instruments and control systems. Installation minimizes wiring confusion and achieves 100 percent protection.
Formula and process have been developed for coating refractory metal surfaces with high voltage electrical insulation for use at temperatures to 600 C. Coatings were specifically developed as an insulation for the surface of a perforated, molybdenum, ion-accelerator grid, but are not limited to this application.
Resistance bridge device incorporates a potentiometer, switches, and a null detector to calibrate high potential dividers under high voltage operation conditions. Calibration can be performed with this device in less than 1 minute at an accuracy of 0.001 percent.
Electronic packaging techniques and design criteria for preventing corona discharges in high-voltage circuitry
A procedure is described for calculating the current collected by a pinhole defect in the insulation covering a high voltage surface. The results apply to a satellite at geosynchronous altitude where the effects of satellite motion and collective plasma effects on the collected current may be ignored.
This paper describes the design, development, fabrication, and test of a high performance, high voltage solar concentrator array. This assembly is believed to be the first ever terrestrial triple-junction-cell solar array rated at over 1 kW. The concentrator provides over 200 W/square meter power output at a nominal 600 Vdc while operating under terrestrial sunlight. Space-quality materials and fabrication techniques were used for the array, and the 3005 meter elevation installation below the Tropic of Cancer allowed testing as close as possible to space deployment without an actual launch. The array includes two concentrator modules, each with a 3 square meter aperture area. Each concentrator module uses a linear Fresnel lens to focus sunlight onto a photovoltaic receiver that uses 240 series-connected triple-junction solar cells. Operation of the two receivers in series can provide 1200 Vdc which would be adequate for the 'direct drive' of some ion engines or microwave transmitters in space. Lens aperture width is 84 cm and the cell active width is 3.2 cm, corresponding to a geometric concentration ratio of 26X. The evaluation includes the concentrator modules, the solar cells, and the materials and techniques used to attach the solar cells to the receiver heat sink. For terrestrial applications, a finned aluminum extrusion was used for the heat sink for the solar cells, maintaining a low cell temperature so that solar cell efficiency remains high.
This paper discusses the numerical modeling of electron flows from the sheath surrounding high positively biased objects in LEO (Low Earth Orbit) to regions of voltage or shape discontinuity on the biased surfaces. The sheath equations are derived from the Two-fluid, Warm Plasma Model. An equipotential corner and a plane containing strips of alternating voltage bias are treated in two dimensions. A self-consistent field solution of the sheath equations is outlined and is pursued through one cycle. The electron density field is determined by numerical solution of Poisson's equation for the electrostatic potential in the sheath using the NASCAP-LEO relation between electrostatic potential and charge density. Electron flows are calculated numerically from the electron continuity equation. Magnetic field effects are not treated.
Cooling to a temperature of approximately liquid nitrogen or lower, reduces arcing, or high voltage breakdown, between two closely spaced electrodes operating in a vacuum. This cooling technique can be applied to electrodes having other than hemispherical shapes.
High voltage power supply design for operation in critical gas pressure regions and at low temperatures
Apollo 11 lunar rock pyroxenes, examining band structure and magnetic ordering by high voltage electron microscopy and electron diffraction
A large (1m x 10m) flat surface of conductive material was biased to high voltage (+ or - 3000 V) to simulate the behavior of a large solar array in low earth orbit. The model array was operated in a plasma environment of 1,000 to 1,000,000/cu cm, with sufficient free space around it for the resulting plasma sheaths to develop unimpeded for 5-10 meters into the surrounding plasma. Measurements of the resulting sheath thickness were obtained. The observed thickness varied approximately as V to the 3/4 power and N to the 1/2 power. This effect appears to limit total current leakage from the test array until sheath dimensions exceed about 1 meter. Total leakage current was also measured with the array.
Two identical SP-HVDE (Space Plasma-High Voltage Drainage Experiment) trays were designed and fabricated and were flown in the NASA LDEF in the LEO environment. The trays were placed with one near the leading edge and one near the trailing edge, and investigation was performed to compare the environmental interactions on the dielectric samples of the two trays. The original objective was successfully achieved by measuring the first in-flight long term average leakage current through 156 coulometers. Less than 5 percent anomalous behavior of the coulometers were found in the post flight analysis.
A laboratory solar power system regulated by on-panel switches has been delivered for operating high power (3 kW), high voltage (15,000 volt) loads (communication tubes, ion thrusters). The modular system consists of 26 solar arrays, each with an integral light source and cooling system. A typical array contains 2,560 series-connected cells. Each light source consists of twenty 500-watt tungsten iodide lamps providing plus or minus 5 percent uniformity at one solar constant. An array temperature of less than 40 C is achieved using an infrared filter, a water-cooled plate, a vacuum hold-down system, and air flushing.
An evaluation is made of the consequences of the interaction of high-voltage spacecraft systems designed for use in orbit or on the lunar and Martian surfaces with such environmental components as electrically charged dust, low pressure atmospheres, ionospheric plasmas and neutral gas species, and chemically reactive species. An account is given of plausible means for obtaining the requisite data and developing priorities for the study of each of the identified interactions. Attention is given to the computational tools whose development is required for the simulation and quantification of risk factors for the various likely interactions.
Low-voltage, high current dc-ac converter from magnetoresistor, superconductor, Hall effect, or thin-film devices
Cesium propellant systems utilizing surface tension to position and transfer liquid propellant in zero-g environment studied with high voltage electrical isolation methods