Search NASA⌕ Search

SEARCH · Search NASA

Results for “hourly weather data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Improving the Time Resolution of Hyper-Spectral Infrared Sounding Observations With Trajectory Enhancement

Low Earth orbit (LEO) hyper-spectral infrared (IR) sounders have significant potential for characterizing the complex evolution of thermodynamic environments favorable for convective initiation and ongoing convection. The snapshots at fixed local times are unable to provide the temporal resolution needed to resolve the rapidly evolving convective environment. A novel methodology using trajectory modeling coupled with satellite soundings was developed to create proximity soundings near NCEI Storm Events to investigate differences in severe weather environments (Kalmus et al., 2019, https://doi.org/10.1175/MWR-D-18-0055.1). This methodology was recently extended to entire satellite swaths forward in time up to six hours into the future and was evaluated during NOAA’s Hazardous Weather Testbed (HWT) in a quasi-operational setting (Kahn et al., 2023, https://doi.org/10.1175/WAF-D-22-0204.1). This methodology is based on parcel forward-trajectory calculations from the satellite observing time to recreate future soundings of temperature and moisture at regularly gridded intervals in space and time. Using coincident Multi-Radar Multi-Sensor (MRMS) rainfall estimates, we show that convective available potential energy (CAPE) is increased and convective inhibition (CIN) is decreased at times and locations where convection initiated. This methodology was evaluated with ERA5 data sampled to mimic the satellite observing swaths (Richardson et al., 2023, https://doi.org/10.5194/egusphere-2023-97). Approximately 60–90% of the temporal and spatial variability in temperature and humidity is explained by parcel advection using trajectory modeling. This method will be applied to the multi-decadal LEO satellite record and could be used to examine capabilities of future satellite missions such as the GeoXO mission.

Emily Berndt↗

Transcribing Air Traffic Control System Command Center Planning Telecons Using Cloud-Based Automatic Speech Recognition

This paper addresses the challenge of using Automatic Speech Recognition (ASR) technology to transcribe regular teleconferences that happen between FAA Air Traffic Control System Command Center (ATCSCC) planners, stakeholders and air users. These planning teleconferences (aka telecons or planning webinars) are an integral part of managing air traffic in the U.S. National Airspace System (NAS). In particular, the meetings facilitate the creation and modification of various traffic management initiatives (TMIs), that are used to regulate the flow of air traffic. This is typically a human intensive process, requiring specialists to listen to the entire meeting audio (10-20 minutes duration) and inferring the state of the NAS (e.g., weather phenomenon) that was discussed. It would be advantageous to have digital transcripts of the audio and have useful information (e.g., related to TMIs) automatically extracted from the transcripts. In this regard, we are exploring the adoption of state-of-the-art speech to text and Natural Language Processing (NLP) tools that will achieve our objective of digitizing the webinar audio. Unfortunately, the highly technical phraseology present in the audio and limited data availability for model building make ASR difficult. To overcome this challenge, we have taken the critical first step in creating a human transcription dataset from ~20 hours of speech in the ATCSCC audio with the help of subject matter experts. A novelty of our work is the creation of a ground truth transcription dataset for ATCSCC teleconference webinars, which is particularly important for Aviation domain-specific NLP tasks. Using Microsoft Speech Studio, a cloud-based ASR platform, we have fine-tuned the English pre-trained ASR models (available in speech studio) and achieved an average word error rate (WER) of 6.81%. The baseline ASR also provides a digital version of each planning webinar, making it accessible and text-searchable for future references. Additionally, the transcriptions can serve as a bridge between raw audio data and a range of text-based NLP tasks, such as named entity recognition (NER) and intent classification, potentially enhancing the digital footprint of the webinars and other connected data sources. Our work has several potential applications. Firstly, the transcriptions can be analyzed to understand the complex decision process of creating, implementing and modifying TMIs and may also contribute to TMI prediction services. Secondly, our dataset and model can be used to develop more accurate ASR systems for aviation-specific language, which can bring about digital communication in the aviation industry (and aid current “voice only” communications, which are inherently error-prone). Lastly, the transcriptions themselves can be used as a valuable resource for training other NLP models.

Stephen S. B. Clarke↗

Winds and turbulence above San Nicolas Island during FIRE

Winds and turbulence above San Nicolas Island (SNI) were continuously monitored during the First ISCCP Regional Experiment (FIRE) with a Doppler sodar (1600 Hz) and an ultrahigh frequencies (UHF) (400 MHz) wind profiler. Individual profiles were logged from 1 through 19 July 1987 at 30 sec to 2 min intervals; preliminary processing of hourly averaged winds from 100 to 2300 m is complete. These wind profiles have been combined with intermittent radiosonde profiles to construct time-height sections of parameters such as the Richardson Number. Analysis now in progress includes interpretation of the sodar (C 2/T) and profiler (C 2/N, C 2/q) reflectivity profiles. These profiles are being combined with radiometric and ceilometer data for investigations of vertical transport and cloud base/top entrainment processes. Finally, by using the SNI data in conjunction with soundings made from the research vessel Pt. Sur, the relationship between changes in the SNI winds and mesoscale and synoptic-scale weather features is being investigated.

White, Allen B.↗

Laser Communications Relay Demonstration Optimetrics Experiment

Within this paper, we report on an Optimetrics experiment conducted on the National Aeronautics and Space Administration (NASA) Laser Communication Relay Demonstration (LCRD). The high precision two-way ranging is conducted on the optical communications link between the LCRD space terminal in a geosynchronous orbit and the Optical Ground Station 1 (OGS1) at Table Mountain, California, and is referred to as optimetrics ranging. The receiver to transmitter clock loopback is implemented in the LCRD space modem. A digital dual mixer time difference phase meter (DDMTD) is implemented in the OGS1 ground modem. The round-trip time is measured with the DDMTD by counting the frame and data clock ticks between transmitter and receiver frame synchronization markers for coarse range, and the relative phase of the transmit and receive clock for high precision range. This approach provides coverage for all potential ranges with no ranging ambiguity. The flight modem FPGA code was modified for frame and data clock loopback and the OGS1 FPGA code was modified for the DDMTD phase meter implementation. The experiment team conducted a 36-hour continuous ranging measurement. Preliminary two-way optimetrics ranging data show a noise floor of 3cm (rms). Based on our theoretical noise analysis and ground tests with spare flight modems, we expected one order of magnitude improvement on ranging precision. We are conducting detailed post data processing to identify the differences to further reduce the noise level and formulating an improved implementation approach for future missions. For reference and comparison, traditional Radio Frequency (RF) ranging between LCRD and OGS1 was conducted at the same time and indicates a ranging noise floor of 30cm(rms). Other telemetry and relevant environmental parameters such as weather and atmosphere temperature were also collected for offline data processing. The high precision ranging and range rate measurements from the laser communications data link clock and clock phase are performed simultaneously with continuous optical communication. No extra hardware added to existing system. This high precision optimetrics measurement implementation provides alternative ranging and range rate measurements for orbit determination (OD) and flight dynamics calculations with higher precision. We see significant improvement on OD for navigation upon implementation in future optical communication systems.

Rafael Garcia↗

Comparison of Surface Ground Temperature from Satellite Observations and the Off-Line Land Surface GEOS Assimilation System

The surface ground temperature (Tg) is an important meteorological variable, because it represents an integrated thermal state of the land surface determined by a complex surface energy budget. Furthermore, Tg affects both the surface sensible and latent heat fluxes. Through these fluxes. the surface budget is coupled with the atmosphere above. Accurate Tg data are useful for estimating the surface radiation budget and fluxes, as well as soil moisture. Tg is not included in conventional synoptical weather station reports. Currently, satellites provide Tg estimates globally. It is necessary to carefully consider appropriate methods of using these satellite data in a data assimilation system. Recently, an Off-line Land surface GEOS Assimilation (OLGA) system was implemented at the Data Assimilation Office at NASA-GSFC. One of the goals of OLGA is to assimilate satellite-derived Tg data. Prior to the Tg assimilation, a thorough investigation of satellite- and model-derived Tg, including error estimates, is required. In this study we examine the Tg from the n Project (ISCCP DI) data and the OLGA simulations. The ISCCP data used here are 3-hourly DI data (2.5x2.5 degree resolution) for 1992 summer months (June, July, and August) and winter months (January and February). The model Tg for the same periods were generated by OLGA. The forcing data for this OLGA 1992 simulation were generated from the GEOS-1 Data Assimilation System (DAS) at Data Assimilation Office NASA-GSFC. We examine the discrepancies between ISCCP and OLGA Tg with a focus on its spatial and temporal characteristics, particularly on the diurnal cycle. The error statistics in both data sets, including bias, will be estimated. The impact of surface properties, including vegetation cover and type, topography, etc, on the discrepancies will be addressed.

Yang, R.↗

Tool for Forecasting Cool-Season Peak Winds Across Kennedy Space Center and Cape Canaveral Air Force Station

The expected peak wind speed for the day is an important element in the daily morning forecast for ground and space launch operations at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45th Weather Squadron (45 WS) must issue forecast advisories for KSC/CCAFS when they expect peak gusts for >= 25, >= 35, and >= 50 kt thresholds at any level from the surface to 300 ft. In Phase I of this task, the 45 WS tasked the Applied Meteorology Unit (AMU) to develop a cool-season (October - April) tool to help forecast the non-convective peak wind from the surface to 300 ft at KSC/CCAFS. During the warm season, these wind speeds are rarely exceeded except during convective winds or under the influence of tropical cyclones, for which other techniques are already in use. The tool used single and multiple linear regression equations to predict the peak wind from the morning sounding. The forecaster manually entered several observed sounding parameters into a Microsoft Excel graphical user interface (GUI), and then the tool displayed the forecast peak wind speed, average wind speed at the time of the peak wind, the timing of the peak wind and the probability the peak wind will meet or exceed 35, 50 and 60 kt. The 45 WS customers later dropped the requirement for >= 60 kt wind warnings. During Phase II of this task, the AMU expanded the period of record (POR) by six years to increase the number of observations used to create the forecast equations. A large number of possible predictors were evaluated from archived soundings, including inversion depth and strength, low-level wind shear, mixing height, temperature lapse rate and winds from the surface to 3000 ft. Each day in the POR was stratified in a number of ways, such as by low-level wind direction, synoptic weather pattern, precipitation and Bulk Richardson number. The most accurate Phase II equations were then selected for an independent verification. The Phase I and II forecast methods were compared using an independent verification data set. The two methods were compared to climatology, wind warnings and advisories issued by the 45 WS, and North American Mesoscale (NAM) model (MesoNAM) forecast winds. The performance of the Phase I and II methods were similar with respect to mean absolute error. Since the Phase I data were not stratified by precipitation, this method's peak wind forecasts had a large negative bias on days with precipitation and a small positive bias on days with no precipitation. Overall, the climatology methods performed the worst while the MesoNAM performed the best. Since the MesoNAM winds were the most accurate in the comparison, the final version of the tool was based on the MesoNAM winds. The probability the peak wind will meet or exceed the warning thresholds were based on the one standard deviation error bars from the linear regression. For example, the linear regression might forecast the most likely peak speed to be 35 kt and the error bars used to calculate that the probability of >= 25 kt = 76%, the probability of >= 35 kt = 50%, and the probability of >= 50 kt = 19%. The authors have not seen this application of linear regression error bars in any other meteorological applications. Although probability forecast tools should usually be developed with logistic regression, this technique could be easily generalized to any linear regression forecast tool to estimate the probability of exceeding any desired threshold . This could be useful for previously developed linear regression forecast tools or new forecast applications where statistical analysis software to perform logistic regression is not available. The tool was delivered in two formats - a Microsoft Excel GUI and a Tool Command Language/Tool Kit (Tcl/Tk) GUI in the Meteorological Interactive Data Display System (MIDDS). The Microsoft Excel GUI reads a MesoNAM text file containing hourly forecasts from 0 to 84 hours, from one model run (00 or 12 UTC). The GUI then displays e peak wind speed, average wind speed, and the probability the peak wind will meet or exceed the 25-, 35- and 50-kt thresholds. The user can display the Day-1 through Day-3 peak wind forecasts, and separate forecasts are made for precipitation and non-precipitation days. The MIDDS GUI uses data from the NAM and Global Forecast System (GFS), instead of the MesoNAM. It can display Day-1 and Day-2 forecasts using NAM data, and Day-1 through Day-5 forecasts using GFS data. The timing of the peak wind is not displayed, since the independent verification showed that none of the forecast methods performed significantly better than climatology. The forecaster should use the climatological timing of the peak wind (2248 UTC) as a first guess and then adjust it based on the movement of weather features.

Barrett, Joe H., III↗

Sensitivity of Low Tropospheric Arctic Temperatures to Assimilation of AIRS Cloud-Cleared Radiances: Impact on Mid-Latitude Waves

In this work, it is shown that the prediction of individual mid-latitude waves in a global forecast framework is sensitive to the initialization over the Arctic and may benefit from the assimilation of cloud-cleared radiances (CCRs) from the Atmospheric Infrared Sounder (AIRS), particularly in partially cloudy regions with active dynamics. This study shows that the assimilation of AIRS CCRs over the Arctic Ocean, providing more information than clear-sky radiances from areas affected by broken low-level stratus clouds, produces slightly cooler low-level temperatures and lower mid-tropospheric height through hydrostatic adjustment. In areas that are data void, as observed by clear-sky radiances, and dynamically active, the assimilation of CCRs provides valuable information that can improve the representation of individual baroclinic waves and their subsequent forecasts. The modifications induced by the assimilation of AIRS CCRs over the Arctic Ocean slightly modifies the geopotential height gradients between the Arctic and the mid-latitudes, leading to potential improvements in the forecast of individual baroclinic waves as is shown through a case study. The observing system experiment (OSE) is performed with the NASA Goddard Earth Observing System (GEOS) data assimilation and forecast system during boreal autumn 2014. AIRS CCRs are thinned to approximately one quarter the density of operationally assimilated AIRS radiances, consistent with their higher information content. Global, 6-hourly analyses are produced from 1 September to 10 November 2014 and 7-day forecasts are initialized at 0000 UTC daily. Since the CCR methodology is widely applicable, these findings are also relevant to other infrared sensors.

Cloud-clearing↗

Medium-range objective predictions of thunderstorms on the McIDAS/CSIS interactive computer system

Until recently, all operational meteorological data has been made available to forecasters in a variety of different forms. Predictions based upon these different data formats have been complicated by the inability of forecasters to easily assimilate, in real-time, all data to provide an optimum decision regarding future weather occurrences. By March 1980, a joint NASA/NOAA effort had been initiated to develop the Centralized Storm Information System (CSIS). The primary objectives of this joint project are related to an improvement of the overall severe storm forecast and warning procedure and to a demonstration of the operational utility of techniques developed within the applied research community. CSIS is to utilize the Man Computer Interactive Data Access System (McIDAS). The present investigation is concerned with one of the first attempts to employ the CSIS system for the evaluation of a new research technique involving the prediction of thunderstorms over a forecast period of 12-48 hours.

Wilson, G. S.↗

The Circulation of the Plasmasphere Fluid during the Erosion Event on September 8, 2017

A strong solar wind pressure pulse triggered the magnetic storm on September 7, 2017. Near the end of September 7, the z-component of the interplanetary magnetic field (IMF Bz) dropped from 9 to -10 nT in 30 min. The IMF Bz remained at the level of -10 nT for 2 hours and then had another rapid drop to -31 nT in 30 min. The sudden plunge of IMF Bz and the associated strong convection electric field stirred up the storm main phase with Dst falling from 0 to -122 nT from 2200 UT on September 7 to 0200 UT on the 8th. Severe plasmasphere erosion was observed on September 8 by multiple spacecraft, such as the Van Allen Probes and the Arase satellite. In this study, we examine the fate of the eroded plasmasphere particles during this event by model simulation as well as satellite data analysis. The simulation tool we use is the Space Weather Modeling Framework (SWMF)/Block-Adaptive Tree Solarwind Roe-type Upwind Scheme (BATS-R-US) model coupled with the Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model. One of the distinctive capabilities of the SWMF/BATSRUS-CIMI model is that it treats the cold plasmas in the plasmasphere as a separate fluid in the MHD equations. As a result, the transport and circulation of the plasmasphere fluid in the global magnetosphere can be traced and the impacts of this cold fluid on the global magnetosphere can be evaluated. In this paper, we will show how the drainage plume is formed during the storm and how the plasmasphere fluid is transported to the flank and lobe regions and eventually to the plasma sheet and reenters into the plasmasphere. We will validate our simulation by plasmasphere signatures observed in both the inner and outer magnetosphere.

Mei-Ching Fok↗

Lightning Observations above and below clouds

The quantitative optical characteristics of cloud to ground (CG) and intracloud (IC) lightning above clouds were studied. A data base of a number of pulse paramaters such as energy, rise times, pulse widths and pulse intervals was complied and categorized for first return strokes, subsequent strokes, the intracloud part of CG flashes and IC flashes. It is found that: (1) single stroke CG's are more readily distinguishable from IC flashes than multiple stroke CG's; (2) there is no significant difference between the energy of first and subsequent return stroke pulses; and (3) the pulse rise times and pulse widths are time broadened. Lightning activity in a mesoscale convective weather system (MCS) was examined. The CG flash rates average almost 50 per minute for 7 hours. It is shown that lightning above storms embedded within the MCS IC lightning activity can be much greater than CG activity at certain times in the MCS lifecycle.

Goodman, S. J.↗

Lidar observations of the nighttime sodium layer at 33 deg N

Measurements of the nighttime atmospheric sodium layer have been performed since 1977, using a dye lidar at Fukuoka (33.4 deg N, 130.2 deg E.). The Kyushu lidar uses a flashlamp pumped dye laser tuned to the sodium D sub 2 line (589.0 nm) as a transmitter. The dye laser used in the Kyushu lidar system has been described elsewhere. Sporadic enhancements of the total column abundance of the layer during the Perseids meteor shower were observed on the nights of August 12 and 13, 1978, 1979, 1981, and 1983. Degrading weather conditions prevented observation on the nights during 1980 and 1983. A contour plot of the sodium layer for the period of 8 hours from 21:00 to 5:00 JST on the night of August 12 to 13 1983, is shown. The predominant feature visible is the increase in the height of peak density from 21:00 to 2:00 JST, and the slight decrease in the height of peak density from 2:00 to 5:00 JST. The average abundance had a maximum of about 7 x 10 to the 13th power/sq m on August 13. A plot is presented of the nightly average abundance for available data. The sodium layer abundance increased on the night of August 12 to 13, 1983, during the peak of the Perseids meteor shower, and the following night, August 13 to 14, almost went back to the monthly mean.

Uchiumi, M.↗

NASA Provides the Capability to Deliver Near Real-Time JPSS Data to Users in Order to Monitor Time-Sensitive Applications Such as Wildfires, Floods, Volcanic Eruptions, Tropical Cyclones and Extreme Weather Events

NASA's Land, Atmosphere Near real-time Capability for EOS (Earth Observing System) (LANCE https://earthdata.nasa.gov/lance) serves near real time (NRT) data to monitor time sensitive applications such as monitoring wildfires, floods, volcanic eruptions, tropical cyclones and extreme weather events. It currently serves data and imagery from the Visible Infrared Imager Radiometer Suite (VIIRS) and Ozone Mapping and Profiler Suite (OMPS) S NPP (Suomi National Polar-orbiting Partnership) instruments and is in the process of integrating continuity data products from VIIRS and OMPS onboard the Joint Polar Satellite System (JPSS), via the JPSS data Hub, to continue to meet the needs of agencies, scientists and members of the general public. NASA's Earth Science Division (ESD) sponsored the EOSDIS development of LANCE in 2009 to provide a central point of access to high quality NRT data products and imagery for applications users. LANCE makes data available to the public within 3 hours of satellite observation and imagery within 4-5 hours of satellite observation. Full resolution browse imagery from LANCE are provided through the Global Imagery Browse Services (GIBS) which also fuels NASA's Worldview tool so that users can interactively browse near real time data. This data supports time critical applications and allows users to view current natural hazards and events and animate the imagery over time.

Near real time↗

The Profile Envision and Splice Tool (PRESTO): Developing an Atmospheric Wind Analysis Tool for Space Launch Vehicles Using Python

Tropospheric winds are an important driver of the design and operation of space launch vehicles. Multiple types of weather balloons and Doppler Radar Wind Profiler (DRWP) systems exist at NASA's Kennedy Space Center (KSC), co-located on the United States Air Force's (USAF) Eastern Range (ER) at the Cape Canaveral Air Force Station (CCAFS), that are capable of measuring atmospheric winds. Meteorological data gathered by these instruments are being used in the design of NASA's Space Launch System (SLS) and other space launch vehicles, and will be used during the day-of-launch (DOL) of SLS to aid in loads and trajectory analyses. For the purpose of SLS day-of-launch needs, the balloons have the altitude coverage needed, but take over an hour to reach the maximum altitude and can drift far from the vehicle's path. The DRWPs have the spatial and temporal resolutions needed, but do not provide complete altitude coverage. Therefore, the Natural Environments Branch (EV44) at Marshall Space Flight Center (MSFC) developed the Profile Envision and Splice Tool (PRESTO) to combine balloon profiles and profiles from multiple DRWPs, filter the spliced profile to a common wavelength, and allow the operator to generate output files as well as to visualize the inputs and the spliced profile for SLS DOL operations. PRESTO was developed in Python taking advantage of NumPy and SciPy for the splicing procedure, matplotlib for the visualization, and Tkinter for the execution of the graphical user interface (GUI). This paper describes in detail the Python coding implementation for the splicing, filtering, and visualization methodology used in PRESTO.

Orcutt, John M.↗

Impacts of Marine Surface Pressure Observations From A Spaceborne Differential Absorption Radar Investigated With an Observing System Simulation Experiment

A new instrument has been proposed for measuring surface air pressure over the marine surface with a combined active/passive scanning multi-channel differential absorption radar (DAR) to provide an estimate of the total atmospheric column oxygen content. A demonstrator instrument, the Microwave Barometric Radar and Sounder (MBARS), has been funded by the National Aeronautics and Space Administration (NASA) for airborne test missions. Here, a proof-of-concept study to evaluate the potential impact of spaceborne surface pressure data on numerical weather prediction is performed using the Goddard Modeling and Assimilation Office global observing system simulation experiment (OSSE) framework. This OSSE framework employs the Goddard Earth Observing System model and the hybrid 4D ensemble variational Gridpoint Statistical Interpolation data assimilation system. Multiple flight and scanning configurations of potential spaceborne orbits are examined. Swath width and observation spacing for the surface pressure data are varied to explore a range of sampling strategies. For wider swaths, the addition of surface pressures reduces the root mean square surface pressure analysis error by as much as 20% over some ocean regions. The forecast sensitivity observation impact tool estimates impacts on the Pacific Ocean basin boundary layer 24-hour forecast temperatures for spaceborne surface pressures on par with rawinsondes and aircraft, and greater impacts than the current network of ships and buoys. The largest forecast impacts are found in the southern hemisphere extratropics.

N.C. Privé↗

The frequency spectrum of C sub n sup 2 from MST radar data

In a recent study (Nastrom et al., 1986), the variability of the refractivity turbulence structure constant, C sub n(2), was examined using observations from the stratosphere troposphere/mesosphere stratosphere troposphere (ST/MST) radar at Poker Flat, Alaska, and Platteville, Colorado. Variations of C2 with height, season, and weather conditions were examined. Also, the autocorrelation function and the frequency distribution of C sub n(2) were studied, and it was shown that C sub n(2), follows a log-normal frequency distribution. One of the more tentative results given in that paper is a first look at the spectrum of log C sub n(2), as a function of frequency at Poker Flat. This spectrum appears to obey a power law relation with frequency, P(F) approx. F(k), with k near -5/3 at periods between about 4 hours and 6 days, and with k near -1 at shorter periods. Power law behavior of a spectrum often helps us to infer the underlying dynamics which give rise to this spectrum, and it is thus of some concern to establish further confidence in the spectral shape. The purpose here is to address these questions.

Nastrom, G. D.↗

Average diurnal variation of summer lightning over the Florida peninsula

Data derived from a large network of electric field mills are used to determine the average diurnal variation of lightning in a Florida seacoast environment. The variation at the NASA Kennedy Space Center and the Cape Canaveral Air Force Station area is compared with standard weather observations of thunder, and the variation of all discharges in this area is compared with the statistics of cloud-to-ground flashes over most of the South Florida peninsula and offshore waters. The results show average diurnal variations that are consistent with statistics of thunder start times and the times of maximum thunder frequency, but that the actual lightning tends to stop one to two hours before the recorded thunder. The variation is also consistent with previous determinations of the times of maximum rainfall and maximum rainfall rate.

Maier, L. M.↗

A System Trade Study of Remote Infrared Imaging for Space Shuttle Reentry

A trade study reviewing the primary operational parameters concerning the deployment of imaging assets in support of the Hypersonic Thermodynamic Infrared Measurements (HYTHIRM) project was undertaken. The objective was to determine key variables and constraints for obtaining thermal images of the Space Shuttle orbiter during reentry. The trade study investigated the performance characteristics and operating environment of optical instrumentation that may be deployed during a HYTHIRM data collection mission, and specified contributions to the Point Spread Function. It also investigated the constraints that have to be considered in order to optimize deployment through the use of mission planning tools. These tools simulate the radiance modeling of the vehicle as well as the expected spatial resolution based on the Orbiter trajectory and placement of land based or airborne optical sensors for given Mach numbers. Lastly, this report focused on the tools and methodology that have to be in place for real-time mission planning in order to handle the myriad of variables such as trajectory ground track, weather, and instrumentation availability that may only be known in the hours prior to landing.

Schwartz, Richard J.↗

Comparison of First-Come First-Served and Optimization Based Scheduling Algorithms for Integrated Departure and Arrival Management

Korea Aerospace Research Institute (KARI) and National Aeronautics and Space Administration (NASA) are investigating scheduling algorithms that will be a part of an integrated arrival and departure management system. Inha University, one of the Korean collaborators of KARI, developed an Extended First-Come First-Served (EFCFS) algorithm that is robust and efficient. However, since the EFCFS algorithm sequentially computes the schedule based on priority, the end results may not be optimal for system efficiency. The approach based on Mixed Integer Linear Programming (MILP) originally developed by NASA and modified by KARI is known to produce better schedules at the expense of computational cost. In this paper, the two different scheduling approaches are compared using common traffic scenarios and constraints at Incheon International Airport. Capabilities to apply weight class based wake turbulence runway separation minima and Miles-in-Trail (MIT) restrictions at selected meter fixes are added to the previously developed EFCFS scheduler. Based on historic data, 40 departures and 20 arrivals are chosen in a one-hour period and 100 scenarios were created by randomly assigning gate numbers, gate departure times, and runway landing times. With the current runway separation requirements, MILP resulted in about ten to twenty percent smaller average delays depending on the constraints. With artificially increased separation minima, the difference between MILP and EFCFS became more noticeable. However, the EFCFS was about ten times faster with smaller variations among different scenarios and constraints. The comparison suggests that the MILP-based algorithm has a small advantage at the current traffic level; however, has potential to be more effective in higher demand or severe weather situations. The EFCFS algorithm may be better suited for real-time applications or investigating larger scale scheduling problems.

air traffic optimization↗