Search NASA⌕ Search

SEARCH · Search NASA

Results for “individual differences”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

The influence of the cloud virial parameter on the initial mass function

ABSTRACT Crucial for star formation is the interplay between gravity and turbulence. The observed cloud virial parameter, $\alpha _{\mathrm{vir}}$, which is the ratio of twice the turbulent kinetic energy to the gravitational energy, is found to vary significantly in different environments, where the scatter among individual star-forming clouds can exceed an order of magnitude. Therefore, a strong dependence of the initial mass function (IMF) on $\alpha _{\mathrm{vir}}$ may challenge the notion of a universal IMF. To determine the role of $\alpha _{\mathrm{vir}}$ on the IMF, we compare the star-particle mass functions obtained in high-resolution magnetohydrodynamical simulations including jet and heating feedback, with $\alpha _{\mathrm{vir}}=0.0625$, 0.125, and 0.5. We find that varying $\alpha _{\mathrm{vir}}$ from $\alpha _{\mathrm{vir}}\sim 0.5$ to $\alpha _{\mathrm{vir}}< 0.1$ shifts the peak of the IMF to lower masses by a factor of $\sim 2$ and increases the star formation rate by a similar factor. The dependence of the IMF and star formation rate on $\alpha _{\mathrm{vir}}$ is non-linear, with the dependence subsiding at $\alpha _{\mathrm{vir}}< 0.1$. Our study shows a systematic dependence of the IMF on $\alpha _{\mathrm{vir}}$. Yet, it may not be measurable easily in observations, considering the uncertainties, and the relatively weak dependence found in this study.

Mathew, Sajay Sunny (ORCID:0000000283818195)↗

Observation of ionization trends in a laboratory photoionized plasma experiment at Z

We report experimental and modeling results for the charge state distribution of laboratory photoionized neon plasmas in the first systematic study over nearly an order of magnitude range of ionization parameter ξ ∝ F/N e . The range of ξ is achieved by flexibility in the experimental platform to adjust either the x-ray drive flux F at the sample or the electron number density N e or both. Experimental measurements of photoionized plasma conditions over such a range of parameters enable a stringent test of atomic kinetics models used within codes that are applied to photoionized plasmas in the laboratory and astrophysics. From experimental transmission data, ion areal densities are extracted by spectroscopic analysis that is independent of atomic kinetics modeling. The measurements reveal the net result of the competition between photon-driven ionization and electron-driven recombination atomic processes as a function of ξ as it affects the charge state distribution. Results from radiation-hydrodynamics modeling calculations with detailed inline atomic kinetics modeling are compared with the experimental results. There is good agreement in the mean charge and overall qualitative similarities in the trends observed with ξ but significant quantitative differences in the fractional populations of individual ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Variational Simulation of the Lipkin-Meshkov-Glick Model on a Neutral Atom Quantum Computer

We simulate the Lipkin-Meshkov-Glick model using the variational-quantum-eigensolver algorithm on a neutral atom quantum computer. We test the ground-state energy of spin systems with up to 15 spins. Two different encoding schemes are used: an individual spin encoding where each spin is represented by one qubit, and an efficient Gray code encoding scheme that only requires a number of qubits that scales with the logarithm of the number of spins. This more efficient encoding, together with zero-noise extrapolation techniques, is shown to improve the fidelity of the simulated energies with respect to exact solutions.

97 MATHEMATICS AND COMPUTING↗

Changes in Future Precipitation Mean and Variability across Scales

Changes in precipitation variability can have large societal consequences, whether at the short time scales of flash floods or the longer time scales of multiyear droughts. Recent studies have suggested that in future climate projections, precipitation variability rises more steeply than does its mean, leading to concerns about societal impacts. Here we evaluate changes in mean precipitation over a broad range of spatial and temporal scales using a range of models from high-resolution regional simulations to millennial-scale global simulations. Results show that changes depend on the scale of aggregation and involve strong regional differences. On local scales that resolve individual rainfall events (hours and tens of kilometers), changes in precipitation distributions are complex and variances rise substantially more than means, as is required given the well-known disproportionate rise in precipitation intensity. On scales that aggregate across many events, distributional changes become simpler and variability changes smaller. At regional scale, future precipitation distributions can be largely reproduced by a simple transformation of present-day precipitation involving a multiplicative shift and a small additive term. The “extra” broadening is negatively correlated with changes in mean precipitation: in strongly “wetting” areas, distributions broaden less than expected from a simple multiplicative mean change; in “drying” areas, distributions narrow less. Precipitation variability changes are therefore of especial concern in the subtropics, which tend to dry under climate change. Outside the tropics, variability changes are similar on time scales from days to decades (i.e., show little frequency dependence). This behavior is highly robust across models, suggesting it may stem from some fundamental constraint.

54 ENVIRONMENTAL SCIENCES↗

Intercomparison of Dynamically and Statistically Downscaled Climate Change Projections over the Midwest and Great Lakes Region

Downscaling of global climate model (GCMs) simulations is a key element of regional-to-local-scale climate change projections that can inform impact assessments, long-term planning, and resource management in different sectors. Here, we conduct an intercomparison between statistically and dynamically downscaled GCMs simulations using the hybrid delta (HD) and the Weather Research and Forecast (WRF) Model, respectively, over the Midwest and Great Lakes region to 1) validate their performance in reproducing extreme daily precipitation (P) and daily maximum temperature (T max ) for summer and winter and 2) evaluate projections of extremes in the future. Our results show the HD statistical downscaling approach, which includes large-scale bias correction of GCM inputs, can reproduce observed extreme P and T max reasonably well for both summer and winter. However, raw historical WRF simulations show significant bias in both extreme P and T max for both seasons. Interestingly, the convection-permitting WRF simulation at 4-km grid spacing does not produce better results for seasonal extremes than the WRF simulation at 12 km using a parameterized convection scheme. Despite a broad similarity for winter extreme P projections, the projected changes in the future summer storms are quite different between downscaling methods; WRF simulations show substantial increases in summer extreme precipitation, while the changes projected by the HD approach exhibit moderate decreases overall. The WRF simulations at 4 km also show a pronounced decoupling effect between seasonal totals and extreme daily P for summer, which suggests that there could be more intense summer extremes at two different time scales, with more severe individual convective storms combined with longer summer droughts at the end of the twenty-first century.

54 ENVIRONMENTAL SCIENCES↗

Problematizing “Planning Ahead”: A Cross-Cultural Analysis of Vietnamese Health and Community Workers’ Perspectives on Advance Care Directives

Informed by values of autonomy and self-determination, advance care planning assumes that individuals should independently take control of their future health. In this article, we draw on research conducted with Vietnamese health and community workers to problematize individualized approaches to planning ahead, reframe notions of “cultural and linguistic barriers,” and expose how homogeneous messages about care at the end of life are not readily translatable within and across diverse groups. Anthropological and feminist critiques of inclusion and exclusion are used to reorientate Anglophone framings of the individual and of cultural and linguistic differences. In this article, we suggest that it is the narrow singularity of care for the self—rather than diverse relationalities of care—that should be overcome if aging and end-of-life care policy and practice is to be broadened and made relevant to migrant and non-English-speaking groups.

Nguyen, Nga↗

Raw leaf gas exchange data, Leaf traits and 13CO2 experiment in the Amazon basin, Manaus, Brazil, 2019

This data package contains raw light response curves of mature leaves from 26 individuals, distributed among 18 species with different canopy positions, and leaf traits (LMA, N, P, and NSC) from Manaus-Brazil (June-November 2019). Branches were cut from the tree and re-cut under water. All measurements were made using (Li-6400XT, Li-Cor®, Lincoln, USA) under standard environmental conditions. Also, have data from an experiment with 13CO2 using a combined method with Licor 6400XT and Picarro. The experiment was conducted with one tropical species and measured the concentration of ¹³CO2 and ¹²CO2 to estimate rates of leaf respiration. All the files included in this data package are in .csv format with additional metadata spreadsheets in Excel file formats.

54 ENVIRONMENTAL SCIENCES↗

Distributed Solar 2020 Data Update [Slides]

Berkeley Lab’s Tracking the Sun report summarizes installed prices and other trends among grid-connected, distributed solar photovoltaic (PV) systems in the United States. This report is now being published on a biannual cycle. In 2020, Berkeley Lab has released a more limited Distributed Solar 2020 Data Update, which consists of the same data otherwise published in Tracking the Sun report. The update includes data on more than 1.9 million systems installed through 2019, covering 82% of all distributed PV systems installed nationally through that timeframe.As in prior years, the data update focuses to a large degree on installed prices reported for distributed PV projects, describing both historical trends and variability in pricing across projects.With respect to the historical price trajectory, national median installed prices fell, from 2018 to 2019, by roughly 1% for residential systems, remained essentially flat for small non-residential systems, and fell by 4% for large non-residential systems. Across all three customer segments, these are the slowest annual percentage declines since 2006-2008.Pricing continues to vary widely across individual projects, reflecting, among other things, differences in system sizing and design, installer-level pricing strategies, and local market conditions. For example, among residential systems installed in 2019, the lowest 20% were priced below $3.1/W, while the highest 20% were above $4.5/W. The distributions for non-residential systems exhibit similarly wide spreads.In addition to data on installed prices, the data update also covers a broad range of trends related to distributed PV system design, including: system sizing, module efficiency, module-level power electronics, inverter-loading ratios, solar+storage installations, mounting configuration, panel orientation, third-party ownership, and customer segmentation.

14 SOLAR ENERGY↗

Bypass Flow Model Implementation for VERA BWR

The Virtual Environment for Reactor Applications (VERA) has been developed by the Consortium for Advanced Simulation of LWRs (CASL) over the past 10 years to address difficult problems facing commercial light-water reactors (LWRs). VERA comprises several high-fidelity physics packages, each of which models a different aspect of the reactor. These individual pieces are then linked to provide a fully coupled multiphysics solution for various LWR analyses.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Absolute Neutron Rate Measurement and Non-Thermal/Thermonuclear Fusion Differentiation

The goal of fusion energy is to produce significantly more energy from fusion reactions than is input into the device. One of the products of fusion reactions is neutrons, which, due to their lack of charge, provide a unique view into the parameters of the device. Lawrence Livermore National Laboratory (LLNL) in collaboration with the University of California, Berkeley (UCB) have designed, assembled, and fielded a robust and portable neutron detection system known as PANDA (Portable and Adaptable Neutron Diagnostics for ARPA-E). This detector suite consists of three LaBr activation detectors that are calibrated to give a total neutron yield on shot, and twenty-four scintillators coupled to photo-multiplier tubes (SPMT). The SPMTs can be configured to attain spatial, temporal and/or energy information from fusion neutrons. The system was designed to be portable and is compartmentalized so that individual components can be used at different fusion facilities. During the duration of this work, part of the system was installed at the FuZE facility, a part of Zap Energy. Another component was installed that the CESZAR facility at the University of California, San Diego (UCSD) to support experiments by Magneto-Inertial Fusion Technologies, Inc. (MIFTI). The diagnostics were successful at both locations and the LLNL/UCB team supported the data analysis by creating and running analysis scripts and Monte-Carlo calculations. At Zap Energy the diagnostics demonstrated that the fusion from the FuZE device is thermonuclear in nature, a result that resulted in an invited talk at the American Physical Society Division of Plasma Physics and an invited paper. Additionally, temporal and spatial data was taken using the SPMTs to understand the duration and length of fusion production. At UCSD the neutron yield from the diagnostics was used to show improvements to fusion yields on their gas puff Z-pinch when using a gas shell surrounding the fuel. The success in this diagnostic has led to continued work at both Zap Energy and MIFTI, as well as follow on funding and interest at other fusion energy companies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shared and Ownership Mobility Technologies in the US: Data Availability and Usage Trends

This report supports the vision for a more sustainable transportation future by summarizing and analyzing the latest data on new mobility technologies, including ridesharing, shared and privately owned bikes, e-bikes, and scooters that have emerged over the past two decades. Having access to accurate and current data that is representative of new mobility systems and individual usage of these systems across different parts of the country is critical for researchers, city and regional planning professionals, and current and potential industry technology developers to better understand and forecast usage trends both nationwide as well as across different existing and potential future markets across the country. Building on the previous study published in 2022, this report incorporates the latest available market and usage data on new mobility technologies and compares usage by Chicago and New York City demographic characteristics. Moreover, this report includes recent developments and insights on privately owned micromobility technologies. Our analysis found that more downtown areas in Chicago show high per capita usage for all three modes than in the previous study, likely due to the full launch of shared e-scooter systems citywide in 2022. Notably, the majority of high shared mobility usage is concentrated in high-income, densely populated downtown areas in Chicago, which also have good public transit access. In contrast, TNC and bikeshare usage hotspots in central Manhattan are more widely distributed, though also appear to be shaped by the geography of the public transit system. Analysis of privately owned micromobility shows that the greatest energy savings occurred when e-bikes replaced single-occupancy vehicle (SOV) trips (i.e., gasoline-powered cars driven alone). Based on the literature review and analysis results, we also make recommendations for supporting the development of both shared and privately owned micromobility programs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Equity-Centered Engagement Through Climate Resilience Policy in Massachusetts

Communities who experience disproportionate climate change impacts tend to be excluded from resilience planning (Vale, 2014). Those efforts typically follow top-down processes within established governance practices that are inaccessible to marginalized folks and reinforce inequalities (Malloy & Ashcraft, 2020; Adger, 2003). Such participatory planning processes may offer the public little opportunity to influence the process itself or the outcomes (Smith & McDonough, 2001). They might ignore important public values or alternative ways of knowing which can be critical assets in resilience (Few et al., 2007). Designing communities for climate action and resilience means creating opportunities for everyone to meaningfully shape those decisions and experience related benefits. Having the opportunity to shape one’s community is necessary for human flourishing (Allen, 2016). Resilience planning that shifts power into communities and focuses on social vulnerability can affect how people survive and thrive in a climate changed world. The Massachusetts Municipal Vulnerability Preparedness (MVP) 2.0 program is an attempt to change the status quo in resilience planning by bringing new voices into decision-making power, recognizing their labor, addressing root causes of vulnerability, and investing in social infrastructure. It aspires to build capacity for equity-focused community engagement within teams of municipal staff and community liaisons, and ultimately build social capital and community cohesion. My mixed methods research investigates implementation of this state grant program in several western Massachusetts towns. I am using document review, participant observation, and interviews to understand the MVP 2.0 process as written, how different towns navigate it, and how individuals make sense of their experiences in it. I seek to understand how those experiences explain relationships between engagement approaches, mediating factors, and process outcomes. I am interested in the conditions that allow for community empowerment and how a model like MVP 2.0 can shift conditions that hold systems in place. In a practical sense, our findings will help municipalities reflect on their work during MVP 2.0 and plan for future community engagement. They may be informative for designing future iterations of the MVP program and for other municipalities, offices of community engagement, and practitioners. The findings will also contribute to the participation, resilience, and climate justice literatures, by adding perspectives on equity-centered resilience and community engagement approaches in smaller towns and rural settings. References: Adger, W. N. (2003). Social capital, collective action, and adaptation to climate change. Economic Geography, 79, 387-404. Allen, D. (2016). Toward a connected society. Our compelling interests: The value of diversity for democracy and a prosperous society, 71-105. Few, R., Brown, K., & Tompkins, E. L. (2007). Public participation and climate change adaptation: avoiding the illusion of inclusion. Climate Policy, 7(1), 46–59. Malloy, J. T., & Ashcraft, C. M. (2020). A framework for implementing socially just climate adaptation. Climatic Change, 160(1), 1–14. Smith, P. D., & McDonough, M. H. (2001). Beyond public participation: Fairness in natural resource decision making. Society & natural resources, 14(3), 239-249. Vale, L. J. (2014). The politics of resilient cities: whose resilience and whose city? Building Research & Information, 42(2), 191–201.

Callaham, Shannon↗

Equity-Centered Engagement Through Climate Resilience Policy in Massachusetts

Resilience efforts tend to reinforce injustices. Communities who experience disproportionate climate impacts are often excluded from resilience planning, and those plans do not typically address root causes of social vulnerability. More transformational approaches to resilience would shift decision-making power into communities and affect how people survive and thrive in a climate changing world. The Massachusetts Municipal Vulnerability Preparedness (MVP) 2.0 program is an attempt to change the status quo in resilience planning by bringing new voices into decision-making power, recognizing their labor, addressing root causes of vulnerability, and investing in social infrastructure. It aims to build capacity for equity-focused community engagement within teams of municipal staff and community liaisons, and ultimately build community cohesion. My mixed methods research investigates implementation of this state grant program in several Massachusetts towns. I am using document review, participant observation, and interviews to understand the MVP 2.0 process as written, how different municipalities navigate it, and how individuals make sense of their experiences in it. I seek to understand how those experiences explain relationships between engagement approaches, mediating factors, and process outcomes. I am interested in the conditions that allow for community empowerment and how a model like MVP 2.0 can shift conditions that hold systems in place. In a practical sense, my empirical results will help municipalities reflect on their work during MVP 2.0 and plan for future community engagement. They may be informative for designing future iterations of the MVP program and for other municipalities, offices of community engagement, and practitioners. The findings will also contribute to the participation, resilience, and climate justice literatures, by adding perspectives on equity-centered resilience and community engagement approaches in smaller towns and rural settings.

Callaham, Shannon↗

Equity-Centered Engagement Through Climate Resilience Policy in Massachusetts

Communities who experience disproportionate climate change impacts tend to be excluded from resilience planning. Those efforts typically follow top-down processes within established governance practices that are inaccessible to marginalized folks and reinforce inequalities. Regenerating the commons includes creating opportunities for everyone to meaningfully shape community resilience decisions and experience related benefits. Resilience planning that shifts power into communities and focuses on social vulnerability can affect how people survive and thrive in a climate changed world. The Massachusetts Municipal Vulnerability Preparedness (MVP) 2.0 program is an attempt to change the status quo in resilience planning by bringing new voices into decision-making power, recognizing their labor, addressing root causes of vulnerability, and investing in social infrastructure. It aspires to build capacity for equity-focused community engagement within teams of municipal staff and community liaisons, and ultimately build social capital and community cohesion. My research investigates implementation of this state grant program in several western Massachusetts towns. I am using document review, participant observation, and interviews to understand the MVP 2.0 process as written, how different towns navigate it, and how individuals make sense of their experiences in it. I seek to understand how those experiences explain relationships between engagement approaches, mediating factors, and process outcomes. I am interested in the conditions that allow for community empowerment and how a model like MVP 2.0 can shift conditions that hold systems in place. In a practical sense, our findings will help municipalities reflect on their work during MVP 2.0 and plan for future community engagement. They may be informative for designing future iterations of the MVP program and for other municipalities or offices of community engagement. The findings will also contribute to the participation, resilience, and climate justice literatures, by adding perspectives on equity-centered resilience and community engagement approaches in smaller towns and rural settings.

Callaham, Shannon↗

Enabling Bipolar Membrane Manufacturing Using Microscopy

Bipolar membranes (BPMs) used for water treatment suffer from interface instabilities, causing premature failure and decreased performance. Recent research has highlighted the impacts of membrane morphology on mechanical behavior and performance. Improved material performance of thin film membranes requires enhanced transport properties coupled with better control of the mechanical characteristics to avoid premature failure of the film. Thus, morphology is a key parameter when developing and evaluating novel membrane materials. Microscopy offers unique advantages for nano-scale characterization of thin film membrane interfaces and morphologies. In this study, the interface junction of BPMs was evaluated using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). BPMs were fabricated using (1) hot pressing lamination, (2) bench-scale solution casting, and (3) roll-to-roll sequential casting (R2R). Both commercial and in-house fabricated ion exchange membranes were used in the BPMs. The BPMs were comprised of a cation exchange membrane and an anion exchange membrane with a catalyst layer sandwiched in between. Cross sectional SEM and EDX images of the membrane interface junction were compared among the different fabrication techniques and materials. The bench cast catalyst layers were nonuniform compared to the R2R and hot pressed membranes, demonstrating the importance of precise catalyst application conditions. Different thicknesses of the BPMs and individual membrane layers revealed that polymer solution concentration needs to be optimized during manufacturing. This work shows that microscopy can identify key processing parameters that affect BPM interface junction quality at the microscale to enable manufacturing of high performance BPMs.

36 MATERIALS SCIENCE↗

Enabling Roll-to-Roll Manufacturing of Bipolar Membranes Using Microscopy

Bipolar membranes (BPMs) used for water treatment suffer from interface instabilities, causing premature failure and decreased performance. Recent research has highlighted the impacts of membrane morphology on mechanical behavior and performance. Improved material performance of thin film membranes requires enhanced transport properties coupled with better control of the mechanical characteristics to avoid premature failure of the film. Thus, morphology is a key parameter when developing and evaluating novel membrane materials. Microscopy offers unique advantages for nano-scale characterization of thin film membrane interfaces and morphologies. In this study, the interface junction of BPMs was evaluated using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). BPMs were fabricated using (1) hot pressing lamination, (2) bench-scale solution casting, and (3) roll-to-roll sequential casting (R2R). Both commercial and in-house fabricated ion exchange membranes were used in the BPMs. The BPMs were comprised of a cation exchange membrane and an anion exchange membrane with a catalyst layer sandwiched in between. Cross sectional SEM and EDX images of the membrane interface junction were compared among the different fabrication techniques and materials. The bench cast catalyst layers were nonuniform compared to the R2R and hot pressed membranes, demonstrating the importance of precise catalyst application conditions. Different thicknesses of the BPMs and individual membrane layers revealed that polymer solution concentration needs to be optimized during manufacturing. This work shows that microscopy can identify key processing parameters that affect BPM interface junction quality at the microscale to enable manufacturing of high performance BPMs.

36 MATERIALS SCIENCE↗

A Lamination Model for Pressure-Assisted Sintering of Multilayered Porous Structures

This work describes a lamination model for pressure-assisted sintering of thin, multilayered, and porous structures based on the linear viscous constitutive theory of sintering and the classical laminated plate theory of continuum mechanics. A constant out-of-plane normal stress is assumed in the constitutive relation. The lamination relations between the force/moment resultants and the strain/curvature rates are presented. Numerical simulations were performed for a symmetric tri-layer laminate consisting of a 10% gadolinia doped ceria (Ce 0.9 Gd 0.1 O 1.95-δ ) composite structure, where porous layers were adhered to the top and bottom of a denser layer under uniaxially-applied pressures and the sinter forging conditions. The numerical results show that, compared with free sintering, the applied pressure can significantly reduce the sintering time required to achieve given layer thicknesses and porosities. Unlike free sintering, which results in a monotonic decrease of the laminate in-plane dimension, pressure-assisted sintering may produce an in-plane dimension increase or decrease, depending on the applied pressure and sintering time. Finally, the individual layers in the laminate exhibit different stress characteristics under pressure-assisted sintering.

42 ENGINEERING↗

The DREAMS Project: Disentangling the Impact of Halo-to-Halo Variance and Baryonic Feedback on Milky Way Dark Matter Speed Distributions

Dark matter direct detection experiments require information about the local dark matter speed distribution to produce constraints on dark matter candidates, or infer their properties in the event of a discovery. In this paper, we analyze how the uncertainty in the dark matter speed distribution near the Sun is affected by baryonic feedback, halo-to-halo variance, and halo mass. To do so, we harness the statistical power of the new DREAMS cold dark matter simulation suite, which is comprised of 1024 zoom-in Milky Way–mass halos with varied initial conditions as well as cosmological and astrophysical parameters. Applying a normalizing flows emulator to these simulations, we find that the uncertainty in the local dark matter speed distribution is dominated by halo-to-halo variance and, to a lesser extent, uncertainty in host halo mass. Uncertainties in supernova and black hole feedback (from the IllustrisTNG model in this case) are negligible in comparison. Using the DREAMS suite, we present a state-of-the-art prediction for the dark matter speed distribution in the Milky Way. Although the standard halo model is contained within the uncertainty of this prediction, individual galaxies may have distributions that differ from it. Lastly, we apply our DREAMS results to the XENON1T experiment and demonstrate that the astrophysical uncertainties are comparable to the experimental ones, solidifying previous results in the literature obtained with a smaller sample of simulated Milky Way–mass halos.

79 ASTRONOMY AND ASTROPHYSICS↗