SEARCH · Search NASA

Results for “initialization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Dynamic and static initialization of a mesoscale model using VAS satellite data

Various mesoscale weather forecast model initialization procedures were tested in seven simulation forecasts for a 12 hr period in July 1981. Attention was given to the impacts of using as input radiosonde data, VISSR Atmospheric Sounder (VAS) data and a combination of VAS and data from a smoothed global analysis. The data were assimilated with successive correction objective analysis procedures. The model had a 60 km horizontal grid-length resolution, 14 layers in the vertical, and accounted for short- and long-wave energy in the surface energy budget but not in the atmosphere. Conventional data were used for the mass and moisture fields. The trials showed that VAS data enhanced the predictions of the temperature and mass variables, while winds were least accurately predicted when VAS data were entered in the initializations. Finally, statically initialized precipitation forecasts from radiosonde and/or VAS data exhibited equal skill.

Beauchamp, J. G.↗

NASA NTRS1985

Sensitivity of a mesoscale model to initial specification of relative humidity, liquid water and vertical motion

The influence of synoptic scale initial conditions on the accuracy of mesoscale precipitation modeling is investigated. Attention is focused on the relative importance of the water vapor, cloud water, rain water, and vertical motion, with the analysis carried out using the Limited Area Mesoscale Prediction System (LAMPS). The fully moist primitive equation model has 15 levels and a terrain-following sigma coordinate system. A K-theory approach was implemented to model the planetary boundary layer. A total of 15 sensitivity simulations were run to investigate the effects of the synoptic initial conditions of the four atmospheric variables. The absence of synoptic cloud and rain water amounts in the initialization caused a 2 hr delay in the onset of precipitation. The delay was increased if synoptic-scale vertical motion was used instead of mesoscale values. Both the delays and a choice of a smoothed moisture field resulted in underestimations of the total rainfall.

Kalb, M. W.↗

NASA NTRS1986

Impact of the initial specification of moisture and vertical motion on precipitation forecasts with a mesoscale model Implications for a satellite mesoscale data base

Using a numerical mesoscale model, four simulations were performed to determine the effects of suppressing the initial mesoscale information in the moisture and wind fields on the precipitation forecasts. The simulations included a control forecast 12-h simulation that began at 1200 GMT March 1982 and three experiment simulations with modifications to the moisture and vertical motion fields incorporated at 1800 GMT. The forecasts from 1800 GMT were compared to the second half of the control forecast. It was found that, compared to the control forecast, suppression of the moisture and/or wind initial field(s) produces a drier forecast. However, the characteristics of the precipitation forecasts of the experiments were not different enough to conclude that either mesoscale moisture or mesoscale vertical velocity at the initial time are more important for producing a forecast closer to that of the control.

Mlynczak, Pamela E.↗

NASA NTRS1987

A DSC study on crystalline LaRC TPI powder - A new version with higher initial molecular weight

A new version of crystalline Langley Research Center Thermoplastic Polyimide (LaRC-TPI) imidized powder, which possesses a higher initial molecular weight (MW), has been prepared and characterized. The scheme used for cyclodehydration during the synthesis of this material is described. Evidence of a higher initial MW for the subject LaRC-TPI is supported by both measurements of the inherent viscosity and the DSC thermograms. An initial melting peak at 295 C is noted in the freshly-synthesized sample. The powder can be recrystallized at any elevated temperatures below 340 C, and a single crystalline endothemic peak is always observed after various thermal histories. The heat of fusion for the fresh sample, as represented by the area under the melting peak in the directional scanning calorimeter thermogram, is about 3.9 cal/gm. Comparisons of thermal properties for the subject material are made to those exhibited by the commercial LaRC-TPI powder.

Hou, Tan-Hung↗

NASA NTRS1988

An initial investigation into methods of computing transonic aerodynamics sensitivity coefficients

Based upon the program outlined in the modified proposal, the initial effort has concentrated on developing the quasi-analytical approach for determining aerodynamic influence coefficients. In addition, in order to keep these initial efforts computationally efficient and straightforward, it was decided to first consider only two-dimensional flow and to model the problem using the transonic small perturbation equation with surface boundary conditions applied along the slit. The small perturbation equation was selected instead of the full potential equation because it permits the capturing of important nonlinear physical phenomena while being by comparison easy to handle from a coding standpoint. Consequently, the initial objectives were: (1) investigate the feasibility of using the quasi-analytical approach for determining aerodynamic sensitivity coefficients in the transonic regime; (2) determine the accuracy of the quasi-analytical approach by comparing results to those computed using finite difference techniques; and (3) investigate efficient methods for solving the large set of equations associated with the quasi-analytical approach.

Carlson, Leland A.↗

NASA NTRS1988

Effect of initial tangential velocity distribution on the mean evolution of a swirling turbulent free jet

An existing cold jet facility at NASA-Lewis was modified to produce swirling flows with controllable initial tangential velocity distribution. Distinctly different swirl velocity profiles were produced, and their effects on jet mixing characteristics were measured downstream of an 11.43 cm diameter convergent nozzle. It was experimentally shown that in the near field of a swirling turbulent jet, the mean velocity field strongly depends on the initial swirl profile. Two extreme tangential velocity distributions were produced. The two jets shared approximately the same initial mass flow rate of 5.9 kg/s, mass averaged axial Mach number and swirl number. Mean centerline velocity decay characteristics of the solid body rotation jet flow exhibited classical decay features of a swirling jet with S = 0.48 reported in the literature. It is concluded that the integrated swirl effect, reflected in the swirl number, is inadequate in describing the mean swirling jet behavior in the near field.

Farokhi, S.↗

NASA NTRS1988

Effect of initial tangential velocity distribution on the mean evolution of a swirling turbulent free jet

Farokhi, S.↗

NASA NTRS1988

Investigation of energy transfer in the ignition mechanism of a NASA standard initiator

The principal objective of the proposed research was to construct a detailed computer model of the NASA Standard Initiator (NSI). The NSI plays a critical role in initiating various pyrotechnic events in the National Space Transportation System and is also used in Shuttle payload applications. Several initiators failed when being tested at very low temperatures (4 to 20 K). During subsequent investigation an unacceptable high failure rate was found even at higher temperatures (100 to 150 K) but the precise cause of failure was not determined. The modelling work was undertaken to investigate reasons for failure and to predict the performance of alternate firing schemes. The work has shown that the most likely cause of failure at low temperature is poor thermal contact between the electrically heated bridgewire and the pyrotechnic charge. This problem may be masked if there is good thermal contact between the bridgewire and the alumina charge cup. The high thermal conductivity of alumina at cryogenic temperatures was overlooked in previous analyses, which assumed that the charge cup acted as a thermal insulator.

Varghese, Philip L.↗

NASA NTRS1989

Initial application of CAP-TSD to wing flutter

The initial application of the CAP-TSD computer program for wing flutter analysis is presented. Computational Aeroelasticity Program - Transonic Small Disturbance (CAP-TSD) is based on an approximate factorization (AF) algorithm that is stable and efficient on supercomputers with vector arithmetic. CAP-TSD was used to calculate steady and unsteady pressures on wings and configurations at subsonic, transonic, and supersonic Mach numbers. However, the CAP-TSD code has been developed primarily for aeroelastic analysis. The initial efforts for validation of the aeroelastic analysis capability is presented. The initial applications include two series of symmetric, planar wing planforms. Well defined modal properties are available for these wings. In addition, transonic flutter boundaries are available for evaluation of the transonic capabilities of CAP-TSD.

Cunningham, Herbert J.↗

NASA NTRS1988

Initial Sr-87/Sr-86 and Sm-Nd chronology of chondritic meteorites

Isotopic analyses of the Rb-Sr and Sm-Nd systems in phosphates from ordinary chondritic meteorites (Bjurbole, Mocs, Menow, Elenovka, Ambapur Nagla, and St. Severin) are presented. The Sm-Nd data yield an isochron of age 4.55 + or - 0.45 Ga and an initial Nd-143/Nd-144 consistent with that of Juvinas. Initial Sr-87/Sr-86 ratios are characteristically (possibly excepting St. Severin) elevated with respect to BABI or ALL. Considering both presently and previously reported data, elevation of initial Sr-87/Sr-86 ratios corresponding to metamorphism intervals of the order of 10 to the 8th years seems quite characteristic of chondrites of metamorphic grade 4 or higher. These formation intervals, however, do not correlate with either degree of metamorphism or with I-Xe ages, hence such data for metamorphic chronologies should be interpreted with caution.

Brannon, J. C.↗

NASA NTRS1989

The effect of initial velocity on manually controlled remote docking of an orbital maneuvering vehicle (OMV) to a space station

Simulated docking maneuvers were performed to assess the effect of initial velocity on docking failure rate, mission duration, and total impulse (fuel consumption). The effect of the removal of the range and rate displays was also examined. Since duration and impulse decrease and increase respectively with increases in initial velocity, two parameters were created by subtracting a reference value from each. These values were termed 'reserve time' and 'radial impulse'. Naive subjects were capable of achieving a high success rate in performing simulated docking maneuvers without extensive experience, and failure rate did not significantly increase with increased velocity. The amount of time pilots reserved for final approach increased with starting velocity. Piloting of docking maneuvers was not significantly affected in any way by the removal of range and rate displays. Values for reserve time, and radial impulse were lowest for docking maneuvers begun at the lowest initial velocity.

Brody, Adam R.↗

NASA NTRS1988

Toward an understanding of global change: Initial priorities for US contributions to the International Geosphere-Biosphere Program

A limited number of high-priority research initiatives are recommended for early implementation as part of the U.S. contribution to the preparatory phase of the International Geosphere-Biosphere Program. The recommendations are based on the committee's analysis of the most critical gaps in the scientific knowledge needed to understand the changes that are occurring in the earth system not being addressed by existing programs. The report articulates a number of important key issues and interactions that characterize global change in the geosphere-biosphere system on time scales of decades to centuries; identifies the knowledge that is the most urgently needed to improve understanding of those issues and interactions; and formulates initial priorities for initial U.S. contributions to the IGBP, recognizing the contributions of other ongoing and proposed programs.

Source record↗

NASA NTRS1989

Load-shortening behavior of an initially curved eccentrically loaded column

To explore the feasibility of using buckled columns to provide a soft support system for simulating a free-free boundary condition in dynamic testing, the nonlinear load-shortening behavior of initially imperfect, eccentrically loaded slender columns is analyzed. Load-shortening curves are obtained for various combinations of load eccentricity and uniform initial curvature and are compared, for reference purposes, with the limiting case of the classical elastica. Results for numerous combinations of initial curvature and load eccentricity show that, over a wide range of shortening, an axially loaded slender column exhibits load-deflection compliance which is of the same order as that of a straight but otherwise identical cantilever beam under lateral tip loading.

Fichter, W. B.↗

NASA NTRS1990

Observations of fatigue crack initiation and damage growth in notched titanium matrix composites

The purpose was to characterize damage initiation and growth in notched titanium matrix composites at room temperature. Double edge notched or center open hole SCS-6/Ti-15-3 specimens containing 0 deg plies or containing both 0 and 90 deg plies were fatigued. The specimens were tested in the as-fabricated (ASF) and in heat-treated conditions. A local strain criterion using unnotched specimen fatigue data was successful in predicting fatigue damage initiation. The initiation stress level was accurately predicted for both a double edge notched unidirectional specimen and a cross-plied center hole specimen. The fatigue produced long multiple cracks growing from the notches. These fatigue cracks were only in the matrix material and did not break the fibers in their path. The combination of matrix cracking and fiber/matrix debonding appears to greatly reduce the stress concentration around the notches. The laminates that were heat treated showed a different crack growth pattern. In the ASF specimens, matrix cracks had a more tortuous path and showed considerable more crack branching. For the same specimen geometry and cyclic stress, the (0/90/0) laminate with a hole had far superior fatigue resistance than the matrix only specimen with a hole.

Naik, R. A.↗

NASA NTRS1989

Experimental observations and finite element analysis of the initiation of fiber microbuckling in notched composite laminates

An understanding was developed of the factors that determine the semi-circular edge-notched compressive strength and the associated failure mode(s) were identified of thermoplastic composite laminates with multidirectional stacking sequences. The experimental observations and the detailed literature review suggest at least four factors that affected the determination of the strain levels at which fiber microbuckling initiates and thus, partially control the composite's compression strength. The dependent variables studied are the compressive strength of a reduced gage section compression specimen and the compression strength of a compression specimen with two semi-circular edge notches (no opposite free edges) centered along the gage section. In this research, specimens containing two semi-circular edge notches (no opposite free edges) were loaded in compression at a relatively slow rate to provide more stable development of fiber microbuckling damage. The results indicate that the local constraints (free surfaces, supporting ply orientation, and resin-rich regions) significantly affect the strain level for the initiation of in-plane fiber microbuckling. Preliminary results at an elevated temperature, 77 C, showed the shear stress yield strength of the resin was reduced and consequently, the resistance to fiber microbuckling was also reduced. The finite element analysis of the perfectly straight fiber problem indicates that the free surface effect causes a 10 percent reduction in the critical buckling strain. However, the experimentally measured reduction for fibers with an initial fiber curvature, was 35 percent.

Guynn, E. Gail↗

NASA NTRS1990

Nonlogarithmic magnetization relaxation at the initial time intervals and magnetic field dependence of the flux creep rate in Bi2Sr2Ca(sub I)Cu2Ox single crystals

At the initial time intervals, preceding the thermally activated flux creep regime, fast nonlogarithmic relaxation is found. The fully magnetic moment Pm(t) relaxation curve is shown. The magnetic measurements were made using SQUID-magnetometer. Two different relaxation regimes exist. The nonlogarithmic relaxation for the initial time intervals may be related to the viscous Abrikosov vortices flow with j is greater than j(sub c) for high enough temperature T and magnetic field induction B. This assumption correlates with Pm(t) measurements. The characteristic time t(sub O) separating two different relaxation regimes decreases as temperature and magnetic field are lowered. The logarithmic magnetization relaxation curves Pm(t) for fixed temperature and different external magnetic field inductions B are given. The relaxation rate dependence on magnetic field, R(B) = dPm(B, T sub O)/d(1nt) has a sharp maximum which is similar to that found for R(T) temperature dependences. The maximum shifts to lower fields as temperature goes up. The observed sharp maximum is related to a topological transition in shielding critical current distribution and, consequently, in Abrikosov vortices density. The nonlogarithmic magnetization relaxation for the initial time intervals is found. This fast relaxation has almost an exponentional character. The sharp relaxation rate R(B) maximum is observed. This maximum corresponds to a topological transition in Abrikosov vortices distribution.

Moshchalcov, V. V.↗

NASA NTRS1989

Can Milankovitch orbital variations initiate the growth of ice sheets in a general circulation model?

The possibility of initiating the growth of ice sheets by solar insolation variations is examined. The study is conducted using a climate model with three different orbital configurations corresponding to 116,000 and 106,000 yr before the present and a modified insolation field with greater reductions in summer insolation at high northern latitudes. Despite the reduced summer and fall insolation, the model fails to maintain snow cover through the summer at locations of suspected ice sheet initiation. The results suggest that there is a discrepancy between the model's response to Milankovitch perturbations and the geophysical evidence of ice sheet initiation. If the model results are correct, the growth of ice shown by geophysical evidence would have occurred in an extremely ablative environment, demanding a complicated strategy.

Rind, D.↗

NASA NTRS1988

Initial blood storage experiment

The design of the Initial Blood Storage Experiment (IBSE) was based upon a carefully controlled comparison between identical sets of human blood cell suspensions - red cells, white cell, and platelets - one set of which was transported aboard the Columbia on a 6 day 11 hour mission, and the other held on the ground. Both sets were carried inside stainless steel dewars within specially fabricated flight hardware. Individual bags of cell suspensions were randomly assigned with respect to ground vs orbit status, dewar chamber, and specific location within the dewar. To foster optimal preservation, each cell type was held under specific optimal conditions of pH, ionic strength, solute concentration, gas tension, and temperature. An added variable in this initial experiment was provided by the use of three different polymer/plasticizer formulations for the sealed bags which held the blood cells. At termination of the experiment, aliquots of the suspensions, identified only by code, were distributed to be assayed. Assays were selected to constitute a broad survey of cellular properties and thereby maximize the chances of detection of gravitational effects. A total of 74 different outcome measurements were reported for statistical analysis. When the measurements were completed, the results were entered into the IBSE data base, at which time the data were matched with the original blood bag numbers to determine their status with respect to polymer/plasticizer type, orbit status (orbit or ground), and storage position within the experimental hardware. The data were studied by analysis of variance. Initially, type of bag and orbital status were main factors; later more detailed analyses were made on specific issues such as position in the hardware and specific plastic. If the analysis of variance indicated a statistical significance at the 5 percent level the corresponding p-value was reported.

Surgenor, Douglas MACN.↗