Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Competitive Sorption of H 2 O and CO 2 in Clay Mineral Interlayers

The first-reported competitive CO 2 –H 2 O sorption isotherms on a naturally occurring expandable clay mineral (saponite) exchanged with Na, K, and Cs at near ambient CO 2 concentrations (1% CO 2 ) are reported by combining ATR-FTIR spectroscopy with gravimetric sorption methods. Little CO 2 sorption was observed at high relative humidity (RH) but increased significantly at low RH. Unlike prior work where CO 2 sorption was reported on samples that were previously subjected to heating and/or evacuation treatment to remove sorbed H 2 O, this study manipulated CO 2 sorption by controlling RH. CO 2 sorption increased in the order Cs- > K- > Na-exchanged saponite and was anticorrelated with the Gibbs energy of hydration of the exchangeable cation. As expected, H 2 O sorption followed the opposite trend, with increased H 2 O sorption occurring in the order Na > K > Cs. The amount of CO 2 sorbed using 1 atm CO 2 (p/p o = 1.0) ranged from 50 to 30 mg CO 2 /g clay and from 1.25 to 0.8 mg CO2 /g clay for 1% CO 2 (p/p o = 0.01) in N 2 . The sensitivity of the ATR-FTIR measurements is demonstrated by detecting the CO 2 stretch of adsorbed CO 2 from air containing 500 ppmv CO 2 . The spectral features of sorbed CO 2 were minimally affected by the nature of the exchangeable cation or variations in H 2 O content. However, the position of the HOH bending band shifted significantly from 1638 to 1610 cm –1 as H 2 O content decreased, reflecting changes in intermolecular hydrogen bonding between H 2 O molecules in the saponite interlayer. The shift in position of the HOH bending band to lower energy was coincident with increased CO 2 sorption. CO 2 sorption in clay mineral interlayers is consistent with sorption on weakly hydrated partially hydrophobic sites found on low charge density smectites and is enhanced by lower RH and by the presence of weakly hydrated exchangeable cations like Cs + or K + . In conclusion, the greatest CO 2 sorption occurs on Cs-saponite because this is the least hydrated cation of the three used in the study and indicates that CO2 sorption occurs on the neutral portion of the siloxane surface.

Johnston, Cliff T. [Purdue Univ., West Lafayette, ↗

Hydrophobic Solvation of Gases (CO 2 , CH 4 , H 2 , Noble Gases) in Clay Interlayer Nanopores

In the past few years, experimental studies have shown that CO 2 is roughly 5 times more soluble in water-saturated clay interlayer water than in bulk liquid water. The fundamental basis of this selectivity remains unknown, as does its relevance to other gases. Here, we use molecular dynamics (MD) simulations and gravimetric adsorption experiments to determine the solubilities of CO 2 , CH 4 , H 2 , and noble gases in clay interlayer water. Our results confirm that clay minerals, despite their well-known hygroscopic nature, have a significant hydrophobic character at the atomistic scale. The affinity of dissolved gases for the clay surface shows significant variations related to the size and shape of the adsorbing molecules and the structuring of interfacial water by clay surfaces. Our results indicate that dissolved gases likely do not behave as inert tracers in fine-grained sedimentary rocks such as shale and mudstone, as routinely assumed in groundwater hydrology studies. Lastly, our results have implications for the fundamental science of hydrophobic adsorption, for the use of dissolved gases as tracers of fluid migration in the subsurface, and for low-carbon energy technologies that rely on fine-grained sedimentary rocks, such as carbon capture and storage, nuclear energy, and the transition from coal to natural gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Breaking of Inversion Symmetry and Interlayer Electronic Coupling in Bilayer Graphene Heterostructure by Structural Implementation of High Electric Displacement Fields

Controlling the interlayer coupling in two-dimensional (2D) materials generates novel electronic and topological phases. Its effective implementation is commonly done with a transverse electric field. However, phases generated by high displacement fields are elusive in this standard approach. Here, we introduce an exceptionally large displacement field by structural modification of a model system: AB-stacked bilayer graphene (BLG) on a SiC(0001) surface. We show that upon intercalation of gadolinium, electronic states in the top graphene layers exhibit a significant difference in the on-site potential energy, which effectively breaks the interlayer coupling between them. As a result, for energies close to the corresponding Dirac points, the BLG system behaves like two electronically isolated single graphene layers. This is proven by local scanning tunneling microscopy (STM)/spectroscopy, corroborated by density functional theory, tight binding, and multiprobe STM transport. Further, the work presents metal intercalation as a promising approach for the synthesis of 2D graphene heterostructures with electronic phases generated by giant displacement fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum Spin Hall Edge States and Interlayer Coupling in Twisted Bilayer WTe 2

The quantum spin Hall (QSH) effect, characterized by topologically protected spin-polarized edge states, was recently demonstrated in monolayers of the transition metal dichalcogenide (TMD) WTe 2 . However, the robustness of this topological protection remains largely unexplored in van der Waals heterostructures containing one or more layers of a QSH insulator. Here, we use scanning tunneling microscopy and spectroscopy (STM/STS) to explore the topological nature of twisted bilayer (tBL) WTe 2 . Furthermore, at the tBL edges, we observe the characteristic spectroscopic signatures of the QSH edge states. For small twist angles, a rectangular moiré pattern develops, which results in local modifications of the band structure. Using first-principles calculations, we quantify the interactions in tBL WTe 2 and its topological edge states as a function of interlayer distance and conclude that it is possible to engineer the topology of WTe 2 bilayers via the twist angle as well as interlayer interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Excitation-Dependent High-Lying Excitonic Exchange via Interlayer Energy Transfer from Lower - to - Higher Bandgap 2D Material

High light absorption (~15%) and strong photoluminescence (PL) emission in monolayer (1L) transition metal dichalcogenides (TMDs) make them ideal candidates for optoelectronic device applications. Competing interlayer charge transfer (CT) and energy transfer (ET) processes control the photocarrier relaxation pathways in TMD heterostructures (HSs). In TMDs, long-distance ET can survive up to several tens of nm, unlike the CT process. Our experiment shows that an efficient ET occurs from the 1Ls WSe 2 -to-MoS 2 with an interlayer hexagonal boron nitride (hBN), due to the resonant overlapping of the high-lying excitonic states between the two TMDs, resulting in enhanced HS MoS 2 PL emission. This type of unconventional ET from the lower-to-higher optical bandgap material is not typical in the TMD HSs. With increasing temperature, the ET process becomes weaker due to the increased electron–phonon scattering, destroying the enhanced MoS 2 emission. Our work provides new insight into the long-distance ET process and its effect on the photocarrier relaxation pathways.

2D material↗

Probing the Role of Interlayer Coupling and Coulomb Interactions on Electronic Structure in Few-Layer MoSe 2 Nanostructures

Despite the weak nature of interlayer forces in transition metal dichalcogenide (TMD) materials, their properties are highly dependent on the number of layers in the few-layer two-dimensional (2D) limit. Here, we present a combined scanning tunneling microscopy/spectroscopy and GW theoretical study of the electronic structure of high quality single- and few-layer MoSe2 grown on bilayer graphene. We find that the electronic (quasiparticle) bandgap, a fundamental parameter for transport and optical phenomena, decreases by nearly one electronvolt when going from one layer to three due to interlayer coupling and screening effects. Our results paint a clear picture of the evolution of the electronic wave function hybridization in the valleys of both the valence and conduction bands as the number of layers is changed. This demonstrates the importance of layer number and electron-electron interactions on van der Waals heterostructures and helps to clarify how their electronic properties might be tuned in future 2D nanodevices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-Frequency Interlayer Breathing Modes in Few-Layer Black Phosphorus

As a new two-dimensional layered material, black phosphorus (BP) is a very promising material for nanoelectronics and nano-optoelectronics. We use Raman spectroscopy and first-principles theory to characterize and understand low-frequency (LF) interlayer breathing modes (<100 cm-1) in few-layer BP for the first time. Using laser polarization dependence study and group theory analysis the breathing modes are assigned to Ag symmetry. Compared to the high-frequency (HF) Raman modes, the LF breathing modes are considerably more sensitive to interlayer coupling and thus their frequencies show stronger dependence on the number of layers. Hence, they constitute an effective means to probe both the crystalline orientation and thickness of few-layer BP. Furthermore, the temperature dependence shows that the breathing modes have a harmonic behavior, in contrast to HF Raman modes which exhibit anharmonicity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Stacking-dependent interlayer coupling in trilayer MoS 2 with broken inversion symmetry

The stacking configuration in few-layer two-dimensional (2D) materials results in different structural symmetries and layer-to-layer interactions, and hence it provides a very useful parameter for tuning their electronic properties. For example, ABA-stacking trilayer graphene remains semimetallic similar to that of monolayer, while ABC-stacking is predicted to be a tunable band gap semiconductor under an external electric field. Such stacking dependence resulting from many-body interactions has recently been the focus of intense research activities. Here we demonstrate that few-layer MoS 2 samples grown by chemical vapor deposition with different stacking configurations (AA, AB for bilayer; AAB, ABB, ABA, AAA for trilayer) exhibit distinct coupling phenomena in both photoluminescence and Raman spectra. By means of ultralow-frequency (ULF) Raman spectroscopy, we demonstrate that the evolution of interlayer interaction with various stacking configurations correlates strongly with layer-breathing mode (LBM) vibrations. Our ab initio calculations reveal that the layer-dependent properties arise from both the spin–orbit coupling (SOC) and interlayer coupling in different structural symmetries. Lastly, such detailed understanding provides useful guidance for future spintronics fabrication using various stacked few-layer MoS 2 blocks.

36 MATERIALS SCIENCE↗

Thickness-Dependent Interlayer Charge Transfer in MoSe 2 /MoS 2 Heterostructures Studied by Femtosecond Transient Absorption Measurements

We report observations of a strong thickness dependence for charge transfer (CT) from MoSe 2 to MoS 2 , as evidenced by transient absorption measurements. By time-resolving CT from MoSe 2 monolayers (1Ls) to MoS 2 flakes of varying thicknesses, including 1L, bilayer (2L), and trilayer (3L), we find that the CT time is several picoseconds in the 1L-MoSe 2 /3L-MoS 2 heterostructure, which is much longer than that of 1L-MoSe 2 /1L-MoS 2 and 1L-MoSe 2 /2L-MoS 2 heterostructures. In addition, the recombination lifetime of the interlayer excitons in the 1L/3L heterostructure is several times longer than that of 1L/1L and 1L/2L heterostructures, reaching 800 ps. Furthermore, we show that a prepulse can reduce the CT time and enhance the interlayer exciton recombination in the 1L/3L heterostructure. Furthermore, these findings illustrate that layer thickness can be an important parameter to control the CT property of van der Waals heterostructures. These experimental results also provide important information for further refining the understanding of the physical mechanisms of CT in van der Waals heterostructures.

36 MATERIALS SCIENCE↗

Mitigation of Shuttle Effect in Li–S Battery Using a Self-Assembled Ultrathin Molybdenum Disulfide Interlayer

Lithium–sulfur batteries are promising for low-cost and high-energy storage, but their applications are still limited by poor cycling stability owing to soluble lithium polysulfide shuttling during battery operation. Avoiding shuttle effect is challenging but it is essential to avoid active material loss and prevent performance decay. We use an ultrathin layer of MoS 2 with thickness of 10–40 nm, which is 1–2 orders of magnitude thinner than conventional interlayers, for Li–S batteries to mitigate polysulfide shuttling. The MoS2 layer formed by exfoliated nanoflakes is deposited by the scalable liquid-based self-assembly method. With less than 1% of additional weight in the cathode, the MoS 2 interlayer with complete coverage inhibits polysulfide diffusion across the separator and therefore remarkably improves the battery performances. Reversible specific capacity reaches 1010 and 600 mA h g –1 at 0.5 and 2C rates, respectively, which decay slowly over 400 cycles (0.11% per cycle). Moreover, the MoS 2 films with high density of catalytic active flake edges enable high areal sulfur loading up to 10 mg cm –2 and areal capacity up to 9.7 mA h cm –2 at a current density of 3.2 mA cm –2 .

25 ENERGY STORAGE↗

Hydride-Based Interlayer for Solid-State Anode-Free Battery

Solid-state batteries (SSBs) are considered a promising approach to realizing an anode-free concept with high energy densities. However, the initial Coulombic efficiency (ICE) has remained insufficient for anode-free batteries using sulfide-based solid electrolytes (SEs). Herein, we incorporated a hydride-based interlayer, 3LiBH 4 -LiI (LBHI), between a typical sulfide SE, Li 6 PS 5 Cl, and the Cu current collector. Further, by investigating the Li plating and stripping behaviors and the (electro)chemical stability between SEs and plated Li, we demonstrated that LBHI can effectively improve interfacial stability, leading to an ICE exceeding 94% in anode-free half cells. This interlayer also improves Coulombic efficiencies and specific capacities in anode-free full cells. Furthermore, the utilization of LBHI enables one to study Li plating behaviors without interference from interfacial (electro)chemical instabilities. The analysis of stack pressure evolution during electrochemical cycling reveals that soft shorting in SSBs arises from both dendrite formation and deformation, offering insights into further optimizing solid-state anode-free batteries.

25 ENERGY STORAGE↗

Twisted MoSe 2 bilayers with variable local stacking and interlayer coupling revealed by low-frequency Raman spectroscopy

Unique twisted bilayers of MoSe 2 with multiple stacking orientations and interlayer couplings in the narrow range of twist angles, 60 ± 3°, are revealed by low-frequency Raman spectroscopy and theoretical analysis. The slight deviation from 60 allows the concomitant presence of patches featuring all three high-symmetry stacking configurations (2H or AA', AB', A'B) in one unique bilayer system. In this case, the periodic arrangement of the patches and their size strongly depend on the twist angle. Ab initio modeling predicts significant changes in frequencies and intensities of low-frequency modes versus stacking and twist angle. Experimentally, the variable stacking and coupling across the interface is revealed by the appearance of two breathing modes corresponding to the mixture of the high-symmetry stacking configurations and unaligned regions of monolayers. Only one breathing mode is observed outside the narrow range of twist angles. This indicates a stacking transition to unaligned monolayers with mismatched atom registry without the in-plane restoring force required to generate a shear mode. As a result, the variable interlayer coupling and spacing in transition metal dichalcogenide bilayers revealed in this study may provide a new platform for optoelectronic applications of these materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ag Intercalation in Layered Cs 3 Bi 2 Br 9 Perovskite for Enhanced Light Emission with Bound Interlayer Excitons

Cesium bismuth bromide (CBB) has garnered considerable attention as a vacancy-ordered layered perovskite with notable optoelectronic applications. However, its use as a light source has been limited due to its weak photoluminescence (PL). Here, we demonstrate metal intercalation as a novel approach to engineer the room-temperature PL of CBB using experimental and computational methods. Ag, when introduced into CBB, occupies vacant sites in the spacer region, forming octahedral coordination with surrounding Br anions. First-principles density functional theory calculations reveal that intercalated Ag represents the most energetically stable Ag species compared to other potential forms, such as Ag substituting Bi. The intercalated Ag forms a strong polaronic trap state close to the conduction band minimum and quickly captures photoexcited electrons with holes remaining in CBB layers, leading to the formation of a bound interlayer exciton, or BIE. The radiative recombination of this BIE exhibits bright room-temperature PL at 600 nm and a decay time of 38.6 ns, 35 times greater than that of free excitons, originating from the spatial separation of photocarriers by half a unit cell separation distance. The BIE as a new form of interlayer exciton is expected to inspire new research directions for vacancy-ordered perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling Interlayer Disorder Toward Reversible Phase Transition in a Layered Sodium Manganese Oxide Cathode

Sodium manganese oxides are promising Na-ion battery cathodes but they suffer from irreversible phase transitions during electrochemical reactions. Most strategies to date have aimed to suppress the phase transitions by stabilizing their layered structures through limiting the content of extractable Na + . Here, we conversely increase atomic disorder in the Na-birnessite, a layered sodium manganese oxide, and thereby modulate its phase transition behavior toward improved electrochemical reversibility. Our study reveals that Mn vacancies and Mn migrated into the interlayer affect interlayer local environment of Na + and water molecules consequently enhancing Na + mobility. We observe better capacity retention for disordered “D-Na-birnessite”, which undergoes a reversible phase transition from the birnessite-type structure to an O′3-type α-Na x MnO 2 -like structure through another intermediate metastable birnessite-type phase. In conclusion, this research highlights the positive effects of atomic disorder to regulate phase transition routes for achieving superior electrochemical reversibility, finally paving the way to overcoming the limits of layered oxide cathodes.

Kang, Seongkoo [Korea Univ., Seoul, (Korea, Republ↗

Alkali-Metal Interlocking of 2D V 4 O 10 Sheets Defines Discretized Interlayer Shear Relationships

Low-dimensional materials manifest structural anisotropy, quantum confinement, and tightly bound excitonic states, which make them attractive building blocks that can be assembled within three-dimensional laterally stitched heterostructures, stacked van der Waals solids, and complex moiré superlattices. Ion intercalation in the galleries between layered materials provides a means of modifying interlayer separation and coupling, but it is also known to drive the shearing of the layers. In this article, we explore the distinct ligand coordination environments afforded by vanadyl oxygens of singular [V 4 O 10 ] sheets and examine how the size, polarizability, and stoichiometry of Group I cations sandwiched between such layers determine the interlocking of the sheets in stacked structures. Based on the topochemical insertion of alkali-metal ions into the layered λ-V 2 O 5 , we identify seven types of guest ion coordination sites discretized into four distinct regimes of interlayer shear in units of half octahedral widths. The coordination preferences of intercalated cations govern how they interlock 2D [V 4 O 10 ] sheets and engender specific shear conformations. We present evidence that static and dynamic disorder in guest ion arrangement modulate the magnetic structure of the intercalated compounds based on electrostatic polarization, localization of charge and spin density, and lattice distortion. The results illustrate the use of topochemical ion insertion to modulate stacking relationships and magnetic transition characteristics.

36 MATERIALS SCIENCE↗

Interlayer magnetophononic coupling in MnBi2Te4

Abstract The emergence of magnetism in quantum materials creates a platform to realize spin-based applications in spintronics, magnetic memory, and quantum information science. A key to unlocking new functionalities in these materials is the discovery of tunable coupling between spins and other microscopic degrees of freedom. We present evidence for interlayer magnetophononic coupling in the layered magnetic topological insulator MnBi 2 Te 4 . Employing magneto-Raman spectroscopy, we observe anomalies in phonon scattering intensities across magnetic field-driven phase transitions, despite the absence of discernible static structural changes. This behavior is a consequence of a magnetophononic wave-mixing process that allows for the excitation of zone-boundary phonons that are otherwise ‘forbidden’ by momentum conservation. Our microscopic model based on density functional theory calculations reveals that this phenomenon can be attributed to phonons modulating the interlayer exchange coupling. Moreover, signatures of magnetophononic coupling are also observed in the time domain through the ultrafast excitation and detection of coherent phonons across magnetic transitions. In light of the intimate connection between magnetism and topology in MnBi 2 Te 4 , the magnetophononic coupling represents an important step towards coherent on-demand manipulation of magnetic topological phases.

36 MATERIALS SCIENCE↗

Order-disorder phase transition driven by interlayer sliding in lead iodides

A variety of phase transitions have been found in two-dimensional layered materials, but some of their atomic-scale mechanisms are hard to clearly understand. Here, we report the discovery of a phase transition whose mechanism is identified as interlayer sliding in lead iodides, a layered material widely used to synthesize lead halide perovskites. The low-temperature crystal structure of lead iodides is found not 2H polytype as known before, but non-centrosymmetric 4H polytype. This undergoes the order-disorder phase transition characterized by the abrupt spectral broadening of valence bands, taken by angle-resolved photoemission, at the critical temperature of 120 K. It is accompanied by drastic changes in simultaneously taken photocurrent and photoluminescence. The transmission electron microscopy is used to reveal that lead iodide layers stacked in the form of 4H polytype at low temperatures irregularly slide over each other above 120 K, which can be explained by the low energy barrier of only 10.6 meV/atom estimated by first principles calculations. Our findings suggest that interlayer sliding is a key mechanism of the phase transitions in layered materials, which can significantly affect optoelectronic and optical characteristics.

36 MATERIALS SCIENCE↗

Quadrupolar excitons and hybridized interlayer Mott insulator in a trilayer moiré superlattice

Transition metal dichalcogenide (TMDC) moiré superlattices, owing to the moiré flatbands and strong correlation, can host periodic electron crystals and fascinating correlated physics. The TMDC heterojunctions in the type-II alignment also enable long-lived interlayer excitons that are promising for correlated bosonic states, while the interaction is dictated by the asymmetry of the heterojunction. Here we demonstrate a new excitonic state, quadrupolar exciton, in a symmetric WSe 2 -WS 2 -WSe 2 trilayer moiré superlattice. The quadrupolar excitons exhibit a quadratic dependence on the electric field, distinctively different from the linear Stark shift of the dipolar excitons in heterobilayers. This quadrupolar exciton stems from the hybridization of WSe 2 valence moiré flatbands. The same mechanism also gives rise to an interlayer Mott insulator state, in which the two WSe 2 layers share one hole laterally confined in one moiré unit cell. In contrast, the hole occupation probability in each layer can be continuously tuned via an out-of-plane electric field, reaching 100% in the top or bottom WSe 2 under a large electric field, accompanying the transition from quadrupolar excitons to dipolar excitons. Our work demonstrates a trilayer moiré system as a new exciting playground for realizing novel correlated states and engineering quantum phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗