Search NASA⌕ Search

SEARCH · Search NASA

Results for “iron”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Surface chemistry and wear behavior of single-crystal silicon carbide sliding against iron at temperatures to 1500 C in vacuum

X-ray photoelectron and Auger electron spectroscopy analyses and morphological studies of wear and metal transfer were conducted with a single-crystal silicon carbide 0001 surface in contact with iron at various temperatures to 1500 C in a vacuum of 10 to the minus 8th power pascal. The results indicate that below 800 C, carbide-carbon and silicon are primarily seen on the silicon carbide surface. Above 800 C the graphite increases rapidly with increase in temperature. The outermost surficial layer, which consists mostly of graphite and little silicon at temperatures above 1200 C is about 2 nm thick. A thicker layer, which consists of a mixture of graphite, carbide, and silicon is approximately 100 nm thick. The closer the surface sliding temperature is to 800 C, the more the metal transfer produced. Above 800 C, there was a transfer of rough, discontinuous, and thin iron debris instead of smooth, continuous and thin iron film which was observed to transfer below 800 C. Two kinds of fracture pits were observed on the silicon carbide surface: (1) a pit with a spherical asperity; and (2) multiangular shaped pits.

Miyoshi, K.↗
NASA NTRS1982

Friction and Wear of Iron in Corrosive Media

Friction and wear experiments were conducted with elemental iron exposed to various corrosive media including two acids, base, and a salt. Studies involved various concentrations of nitric and sulfuric acids, sodium hydroxide, and sodium chloride. Load and reciprocating sliding speed were kept constant. With the base NaOH an increase in normality beyond 0.01 N resulted in a decrease in both friction and wear. X-ray photoelectron spectroscopy (XPS) analysis of the surface showed a decreasing concentration of ferric oxide (Fe2O3) on the iron surface with increasing NaOH concentration. With nitric acid (HNO3) friction decreased in solutions to 0.05 N, beyond which no further change in friction was observed. The concentration of Fe2O3 on the surface continued to increase with increasing normality. XPS analysis revealed the presence of sulfates in addition of Fe2O3 on surfaces exposed to sulfuric acid and iron chlorides but no sodium on surfaces exposed to NaCl.

Rengstorff, G. W. P.↗
NASA NTRS1981

Weathering of iron sulfides under Mars surface ambient conditions

The study of iron sulfide surface alternation reactions under Mars' surface ambient conditions begun during 1980 was extended through improved irradiation design and experimental protocols. A wider range of humidities and more intense irradiation were incorporated in the study. X-ray photoelectron spectra of irradiated chips suggest formation of FeSO4, FeCO3, and an iron oxide on the iron sulfide substrates studied.

Blackburn, T. R.↗
NASA NTRS1982

Coordination chemistry of iron in glasses contributing to remote-sensed spectra of the moon

Ferric iron and tetrahedrally coordinated Fe(2+) ions are identified using Moessbauer and electronic absorption spectroscopic measurements of synthetic glasses equilibrated at P(O2) less than 10 to the -11 atm, simulating the Luna 24 brown glass and Apollo 15 green glass compositions. The presence of 10-20% ferric iron in these low Ti glasses is a result of the absence of Ti(3+) ions. In the brown glass absorption spectra, tetrahedral Fe(3+) and Fe(2+) ions induce an extension of the oxygen-metal charge transfer band into the visible region further than in the green glass containing predominantly octahedral Fe(2+) and Fe(3+) ions. Whereas the glass one-micron band originates from crystal field transitions in octahedral Fe(2+), the glass two-micron band is now positively correlated with tetrahedral Fe(2+) rather than with Fe(2+) ions in pyroxene M2-like sites in the glass structure. The tetrahedral Fe(2+) do not, however, substitute for Si(4+) in glass network-forming sites, instead occurring as network modifiers in larger tetrahedral interstices. The effect of temperature is to induce a pronounced red-shift of the oxygen-iron charge transfer absorption edge, especially for the brown glass, and to intensify significantly the tetrahedral Fe(2+) crystal field two micron band.

Dyar, M. D.↗
NASA NTRS1983

Measurement of Mn-53 in deep-sea iron and stony spherules

Cosmic-ray-produced Mn-53 (half-life, 3.7 x 10 to the 6th yr) is measured in individual and groups of deep-sea iron and stony spherules by highly sensitive neutron activation analysis. The activities found are less than 20 dpm Mn-53/kg Fe (10 to the -5th-10 to the -6th dpm Mn-53/sample) in iron spherules, with the exception of one iron spherule, whose activity is 241 + or - 73 dpm Mn-53/kg Fe. It is believed that these low activities may indicate evaporative loss of Mn-53 caused by heating in the earth's atmosphere. On the other hand, all the stony spherules are found to contain 200-260 dpm Mn-53/kg Fe, which is similar to chondritic values. It is pointed out that these spherules may be ablation debris from large objects.

Nishiizumi, K.↗
NASA NTRS1983

Friction and wear of iron in sulfuric acid

Elemental iron sliding on aluminum oxide in aerated sulfuric acid concentrations ranging from very dilute (0.000007 N; i.e., 4 ppm) to very concentrated (96 percent acid) was studied. Load and reciprocating sliding speeds were kept constant. With the most dilute acid of 0.7 to 0.0002 N, a complex corrosion product formed that was friable and often increased friction and wear. At concentrations of 0.001 N, metal losses were essentially by wear alone. Because no buildup of corrosion products occurred, this acid concentration became the standard from which to separate metal loss from direct corrosion and mechanical wear losses. When the acid concentration was increased to 5 percent, the high corrosion rate of iron in sulfuric acid strongly dominated the total wear loss. This strong corrosion increased to 30 percent acid, and decreased somewhat at 50 percent in accordance with expectations. However, the low corrosion of iron expected at acid concentrations of 65 to 96 percent was not observed in the wear area. It is apparent that the normal passivating film was being worn away and a galvanic cell established which rapidly attached to the wear area.

Rengstorff, G. W. P.↗
NASA NTRS1984

Interaction of sulfuric acid corrosion and mechanical wear of iron

Friction and wear experiments were conducted with elemental iron sliding on aluminum oxide in aerated sulfuric acid at concentrations ranging from very dilute (0.00007 N; i.e., 4 ppm) to very concentrated (96 percent acid). Load and reciprocating sliding speed were kept constant. With the most dilute acid concentration of 0.00007 to 0.0002 N, a complex corrosion product formed that was friable and often increased friction and wear. At slightly higher concentrations of 0.001 N, metal losses were essentially by wear alone. Because no buildup of corrosion products occurred, this acid concentration became the standard from which to separate metal loss from direct corrosion and mechanical wear losses. When the acid concentration was increased to 5 percent (1 N), the well-established high corrosion rate of iron in sulfuric acid strongly dominated the total wear loss. This strong corrosion increased to 30 percent acid and decreased somewhat to 50 percent acid in accordance with expectations. However, the low corrosion of iron expected at acid concentrations of 65 to 96 percent was not observed in the wear area. It was apparent that the normal passivating film was being worn away and a galvanic cell established that rapidly attacked the wear area. Under the conditions where direct corrosion losses were highest, the coefficient of friction was the lowest.

Rengstorff, G. W. P.↗
NASA NTRS1984

The relationship between dissolved humic acids and soluble iron in estuaries

Dissolved humic acid and soluble iron appear to be chemically unassociated in estuaries despite their coincident removal. This conclusion is supported by differences in the aggregation kinetics of soluble iron and dissolved humic acid, the inability of extracted humic acid to stabilize laboratory preparations of ferric hydroxide, and decreasing ratios of humic acid carbon to soluble iron along the axes of some estuaries.

Fox, L. E.↗
NASA NTRS1984

Direct determination of the ionic charge distribution of helium and iron in He-3-rich solar energetic particle events

The first direct measurement of the ionic charge distribution of the helium isotopes and of iron in (He-3)-Fe-rich solar energetic particle events is reported. No significant contribution of singly ionized helium to the events is found. The two-sigma upper limits for the He-3(+)/He-3(2+) and He-4(+)/He-4(2+) ratios are 0.02 and 0.03, respectively. The mean charge state of iron found by averaging five (He-3)-Fe-rich solar energetic particle events is 19 + or -2, significantly larger than the iron charge state for energetic solar particles in normal composition events. These results appear to favor the resonant heating model proposed by Fisk (1978). It is concluded that temperatures in the source region exceed 5 million K in the events under study.

Klecker, B.↗
NASA NTRS1984

Low-gravity solidification of cast iron and space technology applications

Two types of analyses relating to cast iron solidification were conducted. A theoretical analysis using a computer to predict the cooling versus time relationship throughout the test specimen was performed. Tests were also conducted in a ground-based laboratory to generate a cooling time curve for cast iron. In addition, cast iron was cooled through the solidification period on a KC-135 and an F-104 aircraft while these aircraft were going through a period of low gravity. Future subjects for low gravity tests are enumerated.

Graham, J. A.↗
NASA NTRS1985

Effect of superconducting solenoid model cores on spanwise iron magnet roll control

Compared with conventional ferromagnetic fuselage cores, superconducting solenoid cores appear to offer significant reductions in the projected cost of a large wind tunnel magnetic suspension and balance system. The provision of sufficient magnetic roll torque capability has been a long-standing problem with all magnetic suspension and balance systems; and the spanwise iron magnet scheme appears to be the most powerful system available. This scheme utilizes iron cores which are installed in the wings of the model. It was anticipated that the magnetization of these cores, and hence the roll torque generated, would be affected by the powerful external magnetic field of the superconducting solenoid. A preliminary study has been made of the effect of the superconducting solenoid fuselage model core concept on the spanwise iron magnet roll torque generation schemes. Computed data for one representative configuration indicate that reductions in available roll torque occur over a range of applied magnetic field levels. These results indicate that a 30-percent increase in roll electromagnet capacity over that previously determined will be required for a representative 8-foot wind tunnel magnetic suspension and balance system design.

Britcher, C. P.↗
NASA NTRS1985

The problem of the Earth's CO2 content and the iron core

The near absence of metallic iron and the presence of magnetite and FeS in the C-1 chondrites imply that metallic iron was a minor phase present during the accretion process that formed the C-1 chondrites. If the C-1 chondrites provided the bulk of the initial planetary growth materials, the carbon reduction model is favored. The above estimates suggest that some 1240 to 227 times as much CO2 may have been produced during the formation of the core than can be accounted for in the crust and mantle. This discrepancy taken to the extreme suggests either that: (1) the Earth has lost more than 99 percent of its initial CO2 during early differentiation (this is highly unlikely) or: (2) the Earth has acquired some 90 percent of its present mass by the accretion of debris from previously reduced and differentiated but subsequently disrupted planetary bodies whereby the associated CO2 would not be captured, or: (3) the C-1 chondrites represent only a trivial fraction of the initial accretion materials present in the nebular cloud or: (4) condensed iron and anhydrous silicate phases were preferentially accreted during the initial formation of the planetary bodies.

Devore, G. W.↗
NASA NTRS1985

An impact-induced terrestrial atmosphere and iron-water reactions during accretion of the Earth

Shock wave data and theoretical calculations were used to derive models of an impact-generated terrestrial atmosphere during accretion of the Earth. The models showed that impacts of infalling planetesimals not only provided the entire budget of terrestrial water but also led to a continuous depletion of near-surface layers of water-bearing minerals of their structural water. This resulted in a final atmospheric water reservoir comparable to the present day total water budget of the Earth. The interaction of metallic iron with free water at the surface of the accreting Earth is considered. We carried out model calcualtions simulating these processes during accretion. It is assumed that these processes are the prime source of the terrestrial FeO component of silicates and oxides. It is demonstrated that the iron-water reaction would result in the absence of atmospheric/hydrospheric water, if homogeneous accretion is assumed. In order to obtain the necessary amount of terrestrial water, slightly heterogeneous accretion with initially 36 wt% iron planetesimals, as compared with a homogeneous value of 34 wt% is required.

Lange, M. A.↗
NASA NTRS1984

On the brittle-ductile behavior of iron meteorites - New experimental constraints

Impact trials were performed at the NASA vertical gun range to study low-temperature brittle-ductile transitions in meteoritic, steel and iron targets. The trials were performed to enhance the data base underlying the concept of formation of planetesimals in collisional coagulation. Impact velocities of 1.6-5.5 km/sec were used, as were temperatures from 100-300 K. Spallation was observed in the tests with meteorite samples, even at room temperature, and brittleness was enhanced at temperature below 200 C. Net mass losses were induced at the higher impact velocities. It is suggested that iron meteorite agglomerations could form in the inner solar region during nebular condensation, but would not form in farther-out regions such as the asteroid belt. The protoplanets could have an iron core, with metallicity decreasing with radius from the core, which may have happened with the earth.

Matsui, T.↗
NASA NTRS1985

Iron-montmorillonite - A spectral analog of Martian soil

Spectral data for smectite clays, particularly for montmorillonite, which contain various adsorbed ions and are measured in the UV, VIS, and NIR ranges are analyzed and compared with Martian soil and dust spectra. It is shown that the structural octahedral iron in smectite clays affects their light absorbance in the UV at 240-260 nm, which results from an O(2-) to Fe(3+) charge transfer, similar to one observed in the Martian spectrum. Adsorbed iron affects, via crystal field absorptions, the reflectance of montmorillonite in the VIS and NIR ranges, resulting in stronger absorption and higher opacity in the range 0.40-0.65 micron. Both in spectral contrast and presence of (or lack of) spectral features, the Fe-montmorillonite spectra in the VIS and NIR are in reasonable agreement with the Martian spectrum. It is found that the spectral characteristics of iron-saturated smectite clays cannot be used to preclude the presence of clays in Martian soils and dust.

Banin, A.↗
NASA NTRS1985

Chemical compositional study of 35 iron meteorites and its application in taxonomy

Structural and compositional data are reported as a guide to the classification of 35 iron meteorites. The Xinjiang iron meteorite, previously classified as III AB, is reclassified as III E on the basis of its lower Ga/Ni and Ge/Ni ratios, its wider, swollen kamacite bands, and the ubiquitous presence of haxonite, (Fe,Ni)22C. The Dongling (III CD) appears not to be a new meteorite, but to be paired with the Nantan. Four Antarctic iron meteorites, IAB Allan Hills A77250, A77263, A77289, and A77290, are classified as a paired meteorite because of their similarities in structure and in concentrations of various elements. It is shown that Cu shares certain properties with Ga and Ge, which makes them excellent taxonomic parameters.

Wang, D.↗
NASA NTRS1986

Interaction of sulfuric acid corrosion and mechanical wear of iron

Friction and wear experiment were conducted with elemental iron sliding on aluminum oxide in aerated sulfuric acid at concentrations ranging from very dilute (0.00007 N; i.e., 4 ppm) to very concentrated (96 percent acid). Load and reciprocating sliding speed were kept constant. With the most dilute acid concentration of 0.00007 to 0.0002 N, a complex corrosion product formed that was friable and often increased friction and wear. At slightly higher concentrations of 0.001 N, metal losses were essentially by wear alone. Because no buildup of corrosion products occurred, this acid concentration became the standard from which to separate metal loss from direct corrosion and mechanical wear losses. When the acid concentration was increased to 5 percent (1 N), the well-established high corrosion rate of iron in sulfuric acid strongly dominated the total wear loss. This strong corrosion increased to 30 percent acid and decreased somewhat to 50 percent acid in accordance with expectations. However, the low corrosion of iron expected at acid concentrations of 65 to 96 percent was not observed in the wear area. It was apparent that the normal passivating film was being worn away and a galvanic cell established that rapidly attacked the wear area. Under the conditions where direct corrosion losses were highest, the coefficient of friction was the lowest.

Rengstorff, G. W. P.↗
NASA NTRS1987

Directional Solidification of Nodular Cast Iron

Cerium enhances formation of graphite nodules. Preliminary experiments in directional solidification of cast iron shows quantitative correlation of graphite microstructure with growth rate and thermal gradient, with sufficient spheroidizing element to form spheroidal graphite under proper thermal conditions. Experimental approach enables use of directional solidification to study solidification of spheriodal-graphite cast iron in low gravity. Possible to form new structural materials from nodular cast iron.

Curreri, P. A.↗