Search NASA⌕ Search

SEARCH · Search NASA

Results for “lasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Pressure effects on the frequency of continuous-wave optically pumped far-infrared lasers

The frequency of the 170.6-micron CW CH3OH optically pumped laser emission has been remeasured at different pressures without observing the pressure shift observed by Lawandy and Koepf (1980). The far-infrared frequency was synthesized with two stabilized CO2 lasers. No measurable pressure shift over the operating pressure range of the laser was observed, and the frequency was confirmed to be 1 757 526.3 MHz. However, competing lasing lines were found to produce spurious effects on the frequency. These effects may explain the apparent shifts.

Inguscio, M.↗
NASA NTRS1985

Efficient flashlamp-pumped IBr laser

The operating characteristics and scaling parameters of a flashlamp-pumped, 4-m-long IBr laser were investigated to further evaluate its potential as a solar-pumped laser. A peak power of 3 kW/sq cm at 2.7 microns was achieved at 4-Torr IBr pressure. A gain of 0.07 per m was measured at a maximum capacitor discharge energy of 4 kJ. The threshold input power necessary for lasing was found to decrease by a factor of 4 and the laser pulse width increased fourfold as the active gain length was increased from 1 to 4 m. A maximum pulse width of 120 microseconds was achieved with 10-Torr argon diluent added to 4-Torr IBr. Quenching of the excited state by the parent molecule was shown to be unimportant for pressures less than 4-Torr IBr. An intrinsic efficiency in the range of 12 percent has been measured for flashlamp-pumped IBr.

Zapata, L. E.↗
NASA NTRS1985

Separate-contact phase-locked semiconductor laser arrays

The novel optoelectronic devices discussed, phase-locked semiconductor laser arrays with separate contacts can perform a variety of near field and far field pattern tailoring functions and control mutual coherence among array elements, as well as lasing wavelength selectivity and tunability. Attention is presently given to experimental results from such arrays, which indicate that the threshold currents of the 4-micron wide lasers employed are typically 60 mA. The separate contacts to each one of them are provided by means of two-level metallization.

Katz, J.↗
NASA NTRS1985

Coupled-mode analysis of gain and wavelength oscillation characteristics of diode laser phased arrays

The lasing wavelengths and gain characteristics of the modes of phase-locked arrays of channel-substrate-planar (CSP) lasers are presented. The gain values for the array modes are determined from complex coupling coefficients calculated using the fields of neighboring elements of the array. The computations show that, for index guided lasers which have nearly planar phase fronts, the highest order array mode will be preferred. The 'in-phase' or fundamental mode, which produces only one major lobe in the far-field radiation pattern, has the lowest modal gain of all array modes. The modal gain differential between the highest order and fundamental modes is less than 10/cm for weak coupling between the elements.

Butler, J. K.↗
NASA NTRS1985

Threshold kinetic processes for t-C4F9I

To determine the relative threshold of the lasant gas t-C4F9I in comparison to n-C3F7I, the pump energy to reach threshold for photodissociation iodine lasing is measured in a common aparatus. The comparison is made for the threshold energies in the iodide pressure range up to 50 Torr when 64-J electric input into a flashlamp is used for pumping. It is shown from the results that qualitative differences between the thresholds of the two gases result from the degree to which steady state is achieved by the time threshold is reached. The estimated recombination rate for t-C4F9I is found to be much larger than the value given by Ershov et al (1978).

Lee, J. H.↗
NASA NTRS1985

Lasant Materials for Blackbody-Pumped Lasers

Blackbody-pumped solar lasers are proposed to convert sunlight into laser power to provide future space power and propulsion needs. There are two classes of blackbody-pumped lasers. The direct cavity-pumped system in which the lasant molecule is vibrationally excited by the absorption of blackbody radiation and laser, all within the blackbody cavity. The other system is the transfer blackbody-pumped laser in which an absorbing molecule is first excited within the blackbody cavity, then transferred into a laser cavity when an appropriate lasant molecule is mixed. Collisional transfer of vibrational excitation from the absorbing to the lasing molecule results in laser emission. A workshop was held at NASA Langley Research Center to investigate new lasant materials for both of these blackbody systems. Emphasis was placed on the physics of molecular systems which would be appropriate for blackbody-pumped lasers.

Deyoung, R. J.↗
NASA NTRS1986

A model for the kinetics of a solar-pumped long path laser experiment

A kinetic model for a solar-simulator pumped iodine laser system is developed and compared to an experiment in which the solar simulator output is dispersed over a large active volume (150 cu cm) with low simulator light intensity (approx. 200 solar constants). A trace foreign gas which quenches the upper level is introduced into the model. Furthermore, a constant representing optical absorption of the stimulated emission is introduced, in addition to a constant representing the scattering at each of the mirrors, via the optical cavity time constant. The non-uniform heating of the gas is treated as well as the pressure change as a function of time within the cavity. With these new phenomena introduced into the kinetic model, a best reasonable fit to the experimental data is found by adjusting the reaction rate coefficients within the range of known uncertainty by numerical methods giving a new bound within this range of uncertainty. The experimental parameters modeled are the lasing time, laser pulse energy, and time to laser threshold.

Stock, L. V.↗
NASA NTRS1985

UV lidar measurements of the stratospheric aerosol layer and comparison with other optical data

After the violent volcanic eruptions of El Chichon in Mexico (17.33 deg. N, 93.20 deg. W) in late March and early April 1982, enhanced stratospheric aerosols have been monitored by ruby (lasing wavelength lambda=694.3 nm) or Nd:YAG lidars (lambda=1064 or 532 nm). By these lidars, visible or near-infrared optical informations of stratospheric aerosols and their space-time variations can be obtained. It is usually difficult to measure the background level of stratospheric aerosols by an ultraviolet (UV) lidar, since Rayleigh scattering prevails over Mie scattering in the stratosphere. However, after the large volcanic eruptions, UV lidar measurements of stratospheric aerosols are possible. In order to obtain UV optical properties of stratospheric aerosols, measurements have been made at Fukuoka (33.65 deg. N, 130.35 deg. E) by a p-terphenyl dye laser at a wavelength of 340.5 nm. Observational results during October 1982, through May 1983, are shown and are compared with the results obtained by a ruby lidar at Tsukuba (36.05 deg. N, 140.13 deg. E).

Uchino, O.↗
NASA NTRS1985

A three-dimensional transient thermal analysis of the Lidar Atmospheric Sensing Experiment

The development of a three-dimensional thermal analysis model of the Lidar Atmospheric Sensing Experiment (LASE) is the subject of this paper. The use of an interactive computer graphics and finite element generation program to define the geometry information for the thermal model is discussed. The methods used in calculating the heat transfer parameters are explained. The results of the thermal analysis are given, and these results are compared with actual flight data.

Carlson, A. B.↗
NASA NTRS1987

Monolithic Isolated Single-Mode Ring Laser

MISER uses four-sided ring to lase nonreciprocally. Laser concept provides very-compact, efficient, and stable source of coherent radiation. Lasers of single, very-stable frequency desirable for number of purposes. Frequency stability makes possible coherent detection of laser radiation with low-bandwidth detector, useful for communications. Allows very-high-resolution spectroscopy. Any application where desired to use laser in way microwaves used traditionally enhanced if frequency very stable.

Kane, T. J.↗
NASA NTRS1987

Tunable Dual Semiconductor Laser

Parallel lasers interact in shared space to alter output wavelength. New device consists of two stripe lasers in aluminum gallium arsenide chip. Parallel stripes close enough so light from lower laser coupled into upper laser and vice versa. Lasers operated by low-duty-cycle current pulses. Lasing threshold of each about 100 mA. Currents controlled independently. Useful in optical communications systems employing wavelength-division multiplexing.

Mukai, Seiji↗
NASA NTRS1987

Direct solar-pumped iodine laser amplifier

The improvement on the collection system of the Tarmarack Solar Simulator beam was attemped. The basic study of evaluating the solid state laser materials for the solar pumping and also the work to construct a kinetic model algorithm for the flashlamp pumped iodine lasers were carried out. It was observed that the collector cone worked better than the lens assembly in order to collect the solar simulator beam and to focus it down to a strong power density. The study on the various laser materials and their lasing characteristics shows that the neodymium and chromium co-doped gadolinium scandium gallium garnet (Nr:Cr:GSGG) may be a strong candidate for the high power solar pumped solid state laser crystal. On the other hand the improved kinetic modeling for the flashlamp pumped iodine laser provides a good agreement between the theoretical model and the experimental data on the laser power output, and predicts the output parameters of a solar pumped iodine laser.

Han, Kwang S.↗
NASA NTRS1986

Beam profile measurement of a solar-pumped iodine laser

Beam profile measurements have been made as a function of time within the laser pulse and C2F5I pressure. Measurements indicate that the profile is determined directly by the optical excitation volume, produced by the solar simulator, and that media distortion plays a minor role compared to the build up of quenching species during the lasing pulse.

De Young, Russell J.↗
NASA NTRS1986

Phase-locked injection laser arrays with variable stripe spacing

A phase-locked injection laser array is described which utilizes variations in spacing of identical lasing elements to vary the coupling between them. A coupled-mode analysis indicates that excellent matching of fundamental array mode to a uniform gain distribution can be obtained. Observation of the array emission patterns confirms the results of the coupled-mode analysis.

Ackley, Donald E.↗
NASA NTRS1986

Scaling studies of blackbody pumped lasers

The scaling of blackbody pumped lasers to large powers is being studied. The computational results show the possibility of high pressure transverse flow blackbody pumped lasers. A nonsteady technique with metal shims heated rapidly to 1500 K as the blackbody pumping source is being used to carry out the experiment. Fast temperature rise of the shims creates pressure waves inside the laser cavity which destroy the resonance of the cavity. A new design with rectangular quartz tubing inside the cavity to prevent the waves from reaching the lasing region is under construction.

Chang, Jim↗
NASA NTRS1987

The minimum bandwidths of auroral kilometric radiation

The bandwidths of the discrete spectral components of the auroral kilometric radiation can sometimes be as narrow as 5 Hz. Since this would imply an apparent source thickness of substantially less than the wavelength, it is inconsistent with the previous explanation for such discrete components based simply upon vertical localization of a cyclotron source. Instead, such narrow bandwidths can only be explained by radio lasing.

Baumback, M. M.↗
NASA NTRS1987

Stable 1.25 watts CW far infrared laser radiation at the 119 micron methanol line

Far-infrared CW radiation of 1.25 watts has been obtained at the 119 micron methanol line with a CO2 pump power of 125 watts, and the maximum frequency fluctuation of the free running laser is measured to be less than + or - 100 kHz per hour. Reflecting optics have been used, when possible, to minimize CO2 degradation, and the frequency stability is ensured by cooling the input and output couplers. The input and output assemblies within the lasing medium are enclosed to minimize the external effects on the cavity length and to eliminate the mechanical instabilities associated with the use of bellows. The vibrational bottle-neck is broken by cooling the resonator wall to 5 deg and adding He as the buffer gas.

Farhoomand, Jam↗
NASA NTRS1987

Auroral precipitation caused by auroral kilometric radiation

If the auroral kilometric radiation (AKR) were generated by loss cone lasing on closed field lines, as has been proposed, then it should cause substantial auroral precipitation by the pitch angle scattering of energetic electrons into the loss cone. A rough estimate for this precipitation, based upon the observed AKR amplitudes, would imply a flux of at least 2 x 10 to the 8th el/sq cm sec over the projected ionospheric footprint of an individual laser and, if most of the AKR radio lasers occupied the same electron drift an L shell, an arc of 8 km width with a minimum average flux of roughly 10 to the 9th el/sq cm sec. It is believed that this will account for auroral arcs and other aspects of auroral electron precipitation.

Calvert, W.↗