SEARCH · Search NASA
Results for “lattice engineering”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Step engineering for nucleation and domain orientation control in WSe 2 epitaxy on c -plane sapphire
In this study, epitaxial growth of two-dimensional transition metal dichalcogenides on sapphire has emerged as a promising route to wafer-scale single-crystal films. Steps on the sapphire act as sites for transition metal dichalcogenide nucleation and can impart a preferred domain orientation, resulting in a substantial reduction in mirror twins. Here we demonstrate control of both the nucleation site and unidirectional growth direction of WSe 2 on c-plane sapphire by metal–organic chemical vapour deposition. The unidirectional orientation is found to be intimately tied to growth conditions via changes in the sapphire surface chemistry that control the step edge location of WSe 2 nucleation, imparting either a 0° or 60° orientation relative to the underlying sapphire lattice. The results provide insight into the role of surface chemistry on transition metal dichalcogenide nucleation and domain alignment and demonstrate the ability to engineer domain orientation over wafer-scale substrates.
The aerodynamic characteristics of vortex ingestion for the F/A-18 inlet duct
A Reduced Navier-Stokes (RNS) solution technique was successfully combined with the concept of partitioned geometry and mesh generation to form a very efficient 3D RNS code aimed at the analysis-design engineering environment. Partitioned geometry and mesh generation is a pre-processor to augment existing geometry and grid generation programs which allows the solver to (1) recluster an existing gridlife mesh lattice, and (2) perturb an existing gridfile definition to alter the cross-sectional shape and inlet duct centerline distribution without returning to the external geometry and grid generator. The present results provide a quantitative validation of the initial value space marching 3D RNS procedure and demonstrates accurate predictions of the engine face flow field, with a separation present in the inlet duct as well as when vortex generators are installed to supress flow separation. The present results also demonstrate the ability of the 3D RNS procedure to analyze the flow physics associated with vortex ingestion in general geometry ducts such as the F/A-18 inlet. At the conditions investigated, these interactions are basically inviscid like, i.e., the dominant aerodynamic characteristics have their origin in inviscid flow theory.
The aerodynamic characteristics of vortex ingestion for the F/A-18 inlet duct
A Reduced Navier-Stokes (RNS) solution technique was successfully combined with the concept of partitioned geometry and mesh generation to form a very efficient 3-D RNS code aimed at the analysis-design engineering environment. Partitioned geometry and mesh generation is a pre-processor to augment existing geometry and grid generation programs which allows the solver to (1) recluster an existing gridlife mesh lattice, and (2) perturb an existing gridfile definition to alter the cross-sectional shape and inlet duct centerline distribution without returning to the external geometry and grid generator. The present results provide a quantitative validation of the initial value space marching 3-D RNS procedure and demonstrates accurate predictions of the engine face flow field, with a separation present in the inlet duct as well as when vortex generators are installed to suppress flow separation. The present results also demonstrate the ability of the 3-D RNS procedure to analyze the flow physics associated with vortex ingestion in general geometry ducts such as the F/A-18 inlet. At the conditions investigated, these interactions are basically inviscid like, i.e., the dominant aerodynamic characteristics have their origin in inviscid flow theory.
Modulation of Electrostatic Potential in 2D Crystal Engineered by an Array of Alternating Polar Molecules
The moiré potential in rotationally misfit two-dimensional (2D) heterostructures has been used to build artificial exciton and electron lattices, which have become platforms for realizing exotic electronic phases. Here, we demonstrate a different approach to create a superlattice potential in 2D crystals by using the near field of an array of polar molecules. Here, a bilayer of titanyl phthalocyanine (TiOPc), consisting of alternating out-of-plane dipoles, is deposited on monolayer MoS 2 . Time-resolved two-photon photoemission spectroscopy reveals a pair of interlayer exciton states with an energy difference of ~0.1 eV, which is consistent with the electrostatic potential modulation induced by the TiOPc bilayer as determined by density functional theory calculations. Because the symmetry and the period of this potential superlattice can be changed readily by using molecules of different shapes and sizes, molecule/2D heterostructures can be promising platforms for designing artificial exciton and electron lattices.
Floquet engineering multichannel Kondo physics
Floquet engineering has been used to engineer novel interactions in uncorrelated and magnetic insulating materials. Here, we apply this technique to simple heavy fermion models, showing that driving these systems with periodic light introduces emergent Kondo screening channels with distinct symmetries, where the allowed channels are controlled by the light polarization. Furthermore, these systems can be driven through multi-channel degeneracy points, dynamically realizing multi-channel Kondo impurities and lattices that can be used to explore quantum critical phenomena and potentially enhance superconductivity.
Ghost states and surface structures of the charge density wave kagome metal ScV 6 Sn 6
In this work, we investigate the high-temperature phase of the kagome metal ScV 6 Sn 6 using scanning tunneling microscopy/spectroscopy (STM/S) and density functional theory calculations. STM topographic images of the cleaved sample reveal two distinct surface terminations: flat islands with Sn termination and trenches terminated by kagome layers with Sn as the outermost atomic layer. STS measurements on the Sn-terminated and kagome-terminated surfaces show significant differences, in particular the presence of large density of states near the Fermi level in the former case. Our first-principles calculations reveal that the charge density on the kagome-terminated surface gives rise to “ghost states” which show intensity away from surface atoms, arising due to hybridization of orbitals above the surface. These states can obscure the intrinsic properties of the surface, potentially leading to misattribution of the surface termination. This underscores the need for careful interpretation in STM studies, especially when discerning surface states of localized states. Understanding the surface structure of this versatile quantum material provides essential information for interpreting surface-sensitive experiments, tailoring material properties, engineering interfaces, and controlling stability and reactivity. This knowledge paves the way for further exploration and potential applications of kagome lattice materials in various fields, including quantum computing, topological physics, and advanced electronic devices.
Layered topological semimetal GaGeTe: New polytype with non-centrosymmetric structure
GaGeTe is a layered van der Waals material composed of germanene and GaTe sublayers that has been recently predicted to be a basic Z 2 topological semimetal. To date, only one polytype of GaGeTe is known with trigonal centrosymmetric structure (α phase, space group R-3m, No. 166). Here we show that as-grown samples of GaGeTe show traces of at least another polytype with hexagonal non-centrosymmetric structure (β phase, space group P6 3 mc, No. 186). Moreover, we suggest that another bulk hexagonal polytype (γ phase, space group P-3m1, No. 164) could also be found near room conditions. Both α and β polytypes have been identified and characterized by means of X-ray diffraction and Raman scattering measurements with the support of ab initio calculations. We provide the vibrational properties of both polytypes and show that the Raman spectrum reported for GaGeTe almost forty years ago and attributed to the α phase, was, in fact, that of the secondary β phase. Additionally, we show that a Fermi resonance occurs in α-GaGeTe under non-resonant excitation conditions, but not under resonant excitation conditions. Theoretical calculations show that bulk β-GaGeTe is a non-centrosymmetric weak topological semimetal with even smaller lattice thermal conductivity than centrosymmetric bulk α-GaGeTe. In perspective, our work paves the way for the control and engineering of GaGeTe polytypes to design and implement complex van der Waals heterostructures formed by a combination of centrosymmetric and non-centrosymmetric layers of up to three different polytypes in a single material, suitable for a number of fundamental studies and technological applications.
Colloidal AInSe 2 (A = K, Rb, Cs) Nanocrystals with Tunable Crystal and Band Structures
Wide band gap AInSe 2 (A = K, Rb, Cs) is an important interlayer material for improving the efficiency of Cu(In,Ga)(S,Se) 2 (CIGS) solar cells. Compared to high-vacuum deposition and solid-state synthesis, a less energyintensive method is of interest for its fabrication. Herein, we present the rapid, low-temperature colloidal synthesis of AInSe 2 nanocrystals that opens a pathway for convenient solution processing. The crystal structures and electronic band structures of the nanocrystals were studied, and their particle morphology was found to be dependent on the choice of alkali metal and selenium precursors. Homogeneous solid solution (K,Rb,Cs)InSe 2 nanocrystals were synthesized using a mixture of alkali metal precursors. Their compositions, lattice parameters, and band gaps were easily tuned based on the K:Rb:Cs precursor ratio, providing potential for interface engineering of CIGS nanocrystal-based solar cells.
Modulating charge transport via 2 MeV He + irradiation in VO 2
Vanadium dioxide (VO 2 ) is of interest for adaptive electronic applications such as neuromorphic neuristor devices and variable emissivity or tunable thermal control materials, thanks to its key property—a metal–insulator transition (MIT) at 68 °C that is accompanied by a dramatic change in electrical and optical properties. To improve performance in these roles, it is critical to develop approaches to engineer transport properties and the MIT behavior. While many documented techniques exist to modulate the MIT and film resistivities via lattice strain and chemical doping, less is known about the effects of ion irradiation on the intrinsic properties of VO 2 , despite the ability to control the spatial distribution of irradiation beams and the prevalence of high energy ion implantation in the semiconductor industry. The impact of irradiation of different acceleration energies on the responses of VO 2 is of specific interest, as charged particle energy generally impacts both the resulting defect profile and corresponding transport behavior. Here, we demonstrate that 2 MeV He ions at equivalent calculated displacements per atom, in two different types of films, can create remarkable changes to the nature of charge transport in VO 2 , especially in the low-temperature insulating phase. Simulation of resulting changes in electrical conductivity reveals that He ion irradiation offers a strategy to increase both oscillation frequency and the signal transmission. These results provide insights into the intentional design of defect populations to modulate transport for neuromorphic VO 2 devices.
Computational design of high-entropy rare earth aluminum garnets for advanced thermal and environmental barrier coatings
To enhance the protection of Ni-based superalloys in gas turbine engines’ high-temperature environments, it’s crucial to develop advanced thermal/environmental barrier coating (T/EBC) materials with a balanced combination of thermal and mechanical properties. This optimization is essential to safeguard against chemical and thermal challenges. Here, in this study, we harness the power of density functional theory (DFT) in conjunction with combinatorial chemistry methodologies to engineer high-performance high-entropy rare earth disilicates of the RE 3 Al 5 O 12 family (where RE denotes Y, Gd, Er, and Yb). These materials are meticulously designed to exhibit superior phase stability, a targeted coefficient of thermal expansion (CTE), low lattice thermal conductivity, and robust mechanical properties. The determination of CTE values is accomplished through phonon calculations at various volume settings within the quasi-harmonic approximation, while lattice thermal conductivities are rigorously assessed employing the Debye-Callaway model, accounting for three distinct phonon processes. Our findings highlight the remarkable attributes of the solid solution (Y 1/4 Gd 1/4 Er 1/4 Yb 1/4 ) 3 Al 5 O 12 , which displays a reduction in lattice thermal conductivity compared to its individual constituents while maintaining a favorable range of CTE values. The novel T/EBC material, distinguished by their multifaceted functionalities, are poised to use in substantial enhancements in the performance of engines.
Distributed environmental control
We present an architecture of distributed, independent control agents designed to work with the Computer Aided System Engineering and Analysis (CASE/A) simulation tool. CASE/A simulates behavior of Environmental Control and Life Support Systems (ECLSS). We describe a lattice of agents capable of distributed sensing and overcoming certain sensor and effector failures. We address how the architecture can achieve the coordinating functions of a hierarchical command structure while maintaining the robustness and flexibility of independent agents. These agents work between the time steps of the CASE/A simulation tool to arrive at command decisions based on the state variables maintained by CASE/A. Control is evaluated according to both effectiveness (e.g., how well temperature was maintained) and resource utilization (the amount of power and materials used).
Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics
The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.
Structural maturation of myofilaments in engineered 3D cardiac microtissues characterized using small angle x-ray scattering
Abstract Understanding the structural and functional development of human-induced pluripotent stem-cell-derived cardiomyocytes (hiPSC-CMs) is essential to engineering cardiac tissue that enables pharmaceutical testing, modeling diseases, and designing therapies. Here we use a method not commonly applied to biological materials, small angle x-ray scattering, to characterize the structural development of hiPSC-CMs within three-dimensional engineered tissues during their preliminary stages of maturation. An x-ray scattering experimental method enables the reliable characterization of the cardiomyocyte myofilament spacing with maturation time. The myofilament lattice spacing monotonically decreases as the tissue matures from its initial post-seeding state over the span of 10 days. Visualization of the spacing at a grid of positions in the tissue provides an approach to characterizing the maturation and organization of cardiomyocyte myofilaments and has the potential to help elucidate mechanisms of pathophysiology, and disease progression, thereby stimulating new biological hypotheses in stem cell engineering.
Instability and treatments of the coupled discrete element and lattice Boltzmann method by the immersed moving boundary scheme
The immersed moving boundary (IMB) scheme has been extensively used to couple the discrete element method (DEM) with the lattice Boltzmann method (LBM). In the literature, only the formulation of IMB for lattice nodal cells covered by a single-solid particle was given. The treatment of situations where a nodal cell is covered by two or more solid particles is seldom discussed. It is found that some numerical instability can occur for such situations due to an inappropriate computation of the weighting function in the IMB formulation. This work presents an enhanced treatment that can resolve the issue and validates it using some benchmark tests. Furthermore, to avoid the extra costs associated with the treatment and simplify the complicated procedure introduced, a simplified IMB scheme is proposed. The accuracy of both enhanced and simplified IMB schemes are validated by test cases including single-particle sedimentation, two-particle drafting-kissing-tumbling phenomenon, and multiple-particle sedimentation. Then, the robustness of both schemes is examined and discussed using a specially designed flow past cylinders test. Overall, the simplified IMB scheme is proved to be robust and sufficiently accurate and simpler and more effective than the enhanced scheme.
Investigation and validation of the dynamic response of an acoustically levitated particle using the lattice Boltzmann method
The stable levitation of an analyte sample in an acoustic levitator is a primary requirement for accurate x-ray characterization of its scientific structure. A rigid particle oscillates in an under-damped manner when introduced into the node of established standing acoustic waves. This investigation has employed the lattice Boltzmann method (LBM), a computational fluid dynamics technique, for the analysis of such rigid particle dynamics in acoustic levitation. The simulation uses the two dimensional and nine velocity (D2Q9) Bhatnagar-Gross-Krook formulation to levitate a rigid 1.6 mm diameter nylon ($\rho$ = 1150 kg/m 3 ) particle in the air at standard pressure and temperature conditions. The presented work is the first reported simulation of realistic acoustic levitator boundary conditions using the LBM. The simulation can capture the particle-fluid interactions that produce dynamic levitation at less than one-period timescale in the ultrasonic frequency regime. An experiment was conducted by levitating a 1.6mm-diameter nylon sphere to estimate the oscillations, and the oscillating frequency was found to be 50 Hz. The dynamic simulation results are consistent with experimental results for particle oscillations within the same order of magnitude, indicating that LBM formulation can be successfully used to study acoustic levitation to understand and mitigate particle jitter. The distortion of the acoustic field due to a levitating particle's presence was also analyzed to demonstrate how the presence of the particle can disrupt adjacent levitating nodes.
Strain engineering of the charge and spin-orbital interactions in Sr2IrO4
In the high spin–orbit-coupled Sr 2 IrO 4 , the high sensitivity of the ground state to the details of the local lattice structure shows a large potential for the manipulation of the functional properties by inducing local lattice distortions. We use epitaxial strain to modify the Ir–O bond geometry in Sr 2 IrO 4 and perform momentum-dependent resonant inelastic X-ray scattering (RIXS) at the metal and at the ligand sites to unveil the response of the low-energy elementary excitations. Furthermore, we observe that the pseudospin-wave dispersion for tensile-strained Sr 2 IrO 4 films displays large softening along the [h,0] direction, while along the [h,h] direction it shows hardening. This evolution reveals a renormalization of the magnetic interactions caused by a strain-driven cross-over from anisotropic to isotropic interactions between the magnetic moments. Moreover, we detect dispersive electron–hole pair excitations which shift to lower (higher) energies upon compressive (tensile) strain, manifesting a reduction (increase) in the size of the charge gap. This behavior shows an intimate coupling between charge excitations and lattice distortions in Sr 2 IrO 4 , originating from the modified hopping elements between the t 2g orbitals. Our work highlights the central role played by the lattice degrees of freedom in determining both the pseudospin and charge excitations of Sr 2 IrO 4 and provides valuable information toward the control of the ground state of complex oxides in the presence of high spin–orbit coupling.
Synthetic Band Structure Engineering of Graphene Using Block Copolymer-Templated Dielectric Superlattices
Engineering the electronic band structure of two-dimensional (2D) materials by imposing spatially periodic superlattice (SL) potentials opens a pathway to unconventional electronics. Nanopatterning the gate electrode or surface dielectric near 2D crystals provides a powerful strategy for realizing electrostatically tunable “remote” SLs with flexibility in lattice design. Here, we demonstrate the effectiveness of block copolymer (BCP)-templated dielectric nanopatterns for fabricating etch-free high-grade metal oxide SLs. Alumina (AlO x ) nanopatterns with hexagonal symmetry and a 38 nm SL wavelength are produced as a model material by directly converting a self-assembled BCP film via block-selective vapor phase infiltration. Despite micrometer-scale rotational disorder inherent to BCP self-assembly, electronic transport measurements of graphene reveal replica Dirac points at zero field and Hofstadter mini-gaps under finite magnetic fields. These results indicate the successful formation of remote SL potentials in graphene resulting from optimized AlO x nanopattern fabrication to achieve consistent lattice symmetry and periodicity at a macroscopic scale. The findings of this study, combined with the versatile, scalable, and cost-effective nature of BCP nanopatterning, highlight the potential of BCP-templated nanostructures for remote SL engineering in 2D crystals.