Search NASA⌕ Search

SEARCH · Search NASA

Results for “layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Apatite geochemistry as a tool for understanding the petrogenesis of layered mafic-ultramafic rocks in the Bushveld Complex, South Africa

The sources of the magmas that formed the Rustenburg Layered Suite of the Bushveld Complex in South Africa remain debated, despite decades of research. Vertical and lateral variation in bulk rock and mineral separate Sr-Nd isotopic compositions, which generally indicate enriched sources, demonstrate that the layered sequence was formed by the emplacement of multiple batches of magma, crucially resulting in episodes of PGE-Cr-V mineralisation. The Lu-Hf isotope compositions of zircon are, however, at odds with the bulk rock Sr-Nd isotopic heterogeneity as they show near homogeneous compositions throughout the layered sequence (εHf (2.06 Ga) =−8). This lack of variation in Hf isotope composition has been attributed to deep, continental lithospheric mantle-related and/or crustal contamination of plume-derived Bushveld magmas. In this study, we analysed the major, trace element and Sr-Nd isotope geochemistry of apatite in the Rustenburg Layered Suite. Apatite occurs as an intercumulus mineral in the lowermost regions and a cumulus mineral in the uppermost regions of the layered sequence and can therefore be used to test existing models for the isotopic disequilibrium between bulk rock Sr-Nd and zircon Hf isotopic compositions. Apatite is largely chlorapatite in the lowermost regions and fluorapatite in the uppermost regions of the layered sequence. The Merensky Reef is unusual in that it comprises both chlorapatite and fluorapatite. Apatite throughout the layered sequence is generally unzoned and shows no evidence of late-stage alteration. Trace element data show that apatite is enriched in L/HREE, with common negative Eu-Sr anomalies. These trace element signatures are consistent with a magmatic origin for the apatite grains, with prior, or concurrent, plagioclase crystallization from the same melt. Variability in in situ Sr and Nd isotope compositions of apatite is recorded throughout the layered sequence with εNd (2.06 Ga) compositions varying between −2.5 and − 10.2 and initial 87 Sr/ 86 Sr compositions varying between 0.7079 and 0.7103 (for the Marikana dikes only). The variability in Sr-Nd isotope compositions of apatite is consistent with the bulk rock (and mineral separate) variation in Sr-Nd isotope compositions, suggesting apatite preserves primary magmatic compositions in the Rustenburg Layered Suite.

Apatite↗
DOE OSTI2020

Molecular Layer Etching of Metalcone Films Using Lithium Organic Salts and Trimethylaluminum

Advances in semiconductor device manufacturing are limited by our ability to precisely add and remove thin layers of material in multistep fabrication processes. Recent reports on atomic layer etching (ALE) have provided the means for the precise removal of inorganic thin films deposited by atomic layer deposition (ALD), opening new avenues for nanoscale device design. Here, we report on a new technique for the precise removal of metal organic thin films deposited by molecular layer deposition (MLD), which we term molecular layer etching. This etching process employs sequential exposures of lithium organic salt (LOS) and trimethylaluminum (TMA) precursors to produce self-limiting etching behavior. We employ quartz crystal microbalance experiments to demonstrate (i) etching of alucone films preloaded with LOS upon TMA exposures and (ii) layer-by-layer etching of alucone films using alternating exposures of LOS and TMA. We also identify the selectivity of these etching mechanisms. We probe the mechanism for the layer-by-layer etching of alucone using a quartz crystal microbalance and Fourier transform infrared spectroscopy and identify that the etching proceeds via heterolytic cleaving of Al-O bonds in alucone upon LOS exposure followed by methylation to produce volatile species upon TMA exposure. The etching process results in the removal of 0.4 nm/cycle of alucone at 160 °C and up to 3.6 nm/cycle of alucone at 266 °C in ex situ etching experiments on silicon wafers. This halogen-free etching process enables etching of MLD films and provides new fabrication pathways for the control of material geometries at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the Effects of the First Atomic Layer on the Dynamic Behavior of Sub-2 nm MgO/Al 2 O 3 Memristors

As electronic devices continue to scale down from the current sub-5 nm range, atomic-scale control of defects becomes increasingly crucial to suppressing their impact on the physical properties of the devices. Memristors present an excellent example as a nonlinear and dynamic device with high speed and endurance required for electronic applications ranging from neuromorphic computing to nonvolatile memories. Herein we investigate the impact of atomic defects in sub-2 nm thick MgO/Al 2 O 3 atomic layer stack (ALS) memristors that use an M1 (switching layer)/M2 (oxygen vacancy reservoir layer) bilayer structure grown using in vacuo atomic layer deposition (iALD). Intriguingly, we revealed a direct correlation of the atomic defects in the M2 layer with the memristor dynamic behavior using a combined analysis of in situ scanning tunneling spectroscopy (iSTS) on the M2 layer and ex situ characterization on the memristors. Specifically, incomplete coverage of the 1st ALD atomic layer of M2 on the electrode yields defects at the M2/electrode interface. Despite the monotonic increase of ALD coverage, by almost three-fold from ~30% to >90%, at completion of the M2 layer of ~ 0.7 nm in thickness, the impact of the defects on the M2/electrode interface has been found detrimental to both memristor switching speed and endurance. Guided by atomistic simulation, we addressed the issue of interface defects via tuning of the Al surface hydroxylation to increase the first atomic layer ALD coverage to ~75%, leading to improved memristor switching speed and endurance by several orders of magnitude. In conclusion, these findings shed light on the correlation between the atomic defects and the dynamic behavior of sub-2 nm memristors and the importance of minimizing the atomic defects in memristors for future electronic applications.

Atomic Layer Deposition↗
DOE OSTI2020

Comparison of Shadowgraphy and X-Ray Phase Contrast Methods for Characterizing a DT Ice Layer in an Inertial Confinement Fusion Target

Shadowgraphy and x-ray phase contrast (XPC) imaging are two techniques that are used for characterizing the deuterium-tritium ice layer in Inertial Confinement Fusion targets. Each technique has limitations that affect how accurately they can characterize small crystalline defects and measure the ice-thickness non-uniformities that may be only a few micrometers in height. The concern is that shadowgraphy may be overly sensitive to the shape and depth of defects in the surface and insufficiently sensitive to the shape of longer-wavelength roughness, while x-ray phase contrast may be too insensitive to defects in the ice surface. Multiple ice layers with different thicknesses (40 to 63 μm), thickness uniformities (peak-valley variations that range from <2- to 12 μm), and crystal defects were analyzed using shadowgraphy and x-ray phase contrast techniques. The results from each method agree when the ice layer is uniformly thick and the crystal lacks defects. That agreement worsens as the number of defects in the surface of the ice layer increases and the roughness that is determined from a shadowgram image of the target’s limb is greater than can be justified by the number of defects that are seen in the target’s front and rear surfaces. The XPC technique is considerably less sensitive to surface defects, in part due to the poorer dynamic range and image resolution compared to shadowgraphy. Localized regions of the ice layer that are thicker or thinner than the average thickness of the layer are reported by shadowgraphy to be smaller in height and footprint (by up to 30%) than by XPC. As a result, the two techniques report different ice layer thicknesses that can vary by up to 10%. Shadowgraphy results from two caustics that trace different paths through the target, and, in theory, image the same ice-vapor surface (but reflect from either the vapor or ice side of the interface) did not consistently characterize the size or shape of ice features to be the same magnitude. Here, the XPC technique provides the best assessment of low-mode (l < 7) roughness in the ice layer. Shadowgraphy results using the strongest caustic is best for detecting the presence of grooves in the ice, though not for quantifying the size of them. If multiple grooves are present it is best to discard and reform the ice layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Insight the process of hydrazine gas adsorption on layered WS 2 : a first principle study

The process of hydrazine gas adsorption on layered WS 2 has been systematically studied from first principle calculations. Our results demonstrate that this adsorption process is exothermic, and hydrazine molecules are physically adsorbed. The layer-dependent adsorption energy and interlayer separation induced by van der Waals interaction exerted by hydrazine molecules lead to the difficulty in desorbing hydrazine molecules from layered WS 2 as the number of layers increases. The most interesting finding is the emergence of localized impurity states below the Fermi level upon the hydrazine adsorption, irrespective of the number of WS 2 layers, resulting in a significant effect on the band structures and subsequently changing its electrical conductivity. Furthermore, a layer-dependent small charge transfer occurs between hydrazine and layered WS 2 , leading to a charge redistribution and considerable polarization in the adsorbed systems. The existence of defects and the humidity, on the other hand, influences the sensitivity of layered WS 2 to the hydrazine adsorption. Here, obtained results show that a perfectly layered WS 2 might be a promising candidate as an efficient nanosensor to detect such toxic gas in dry environment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Layer-dependent optically induced spin polarization in InSe

Optical control of spin in semiconductors has been pioneered using nanostructures of III-V and II-VI semi-conductors, but the emergence of two-dimensional van der Waals materials offers an alternative low-dimensional platform for spintronic phenomena. Indium selenide (InSe), a group-III monochalcogenide van der Waals material, has shown promise for optoelectronics due to its high electron mobility, tunable direct band gap, and quantum transport. In addition to these confirmed properties, there are predictions of spin-dependent optical selection rules, suggesting the potential for all-optical excitation and control of spin in a two-dimensional layered material. Despite these predictions, layer-dependent optical spin phenomena in InSe have yet to be explored. Here, we present measurements of layer-dependent optical spin dynamics in few-layer and bulk InSe. Polarized photoluminescence reveals layer-dependent optical orientation of spin, thereby demonstrating the optical selection rules in few-layer InSe. Spin dynamics are also studied in many-layer InSe using time-resolved Kerr rotation spectroscopy. By applying out-of-plane and in-plane static magnetic fields for polarized emission measurements and Kerr measurements, respectively, the g factor for InSe was extracted. Further investigations are done by calculating precession values using a k · p model, which is supported by ab initio density functional theory. Comparison of predicted precession rates with experimental measurements highlights the importance of excitonic effects in InSe for understanding spin dynamics. In conclusion, optical orientation of spin is an important prerequisite for optospintronic phenomena and devices, and these first demonstrations of layer-dependent optical excitation of spins in InSe lay the foundation for combining layer-dependent spin properties with advantageous electronic properties found in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

A Comparative Study of Layer Heating and Continuous Heating Methods on Prediction Accuracy of Residual Stresses in Selective Laser Melted Tube Samples

Thermal distortion and residual stresses are two important factors that affect the quality and reliability of steel parts manufactured by laser powder bed fusion (LPBF) processes. A cost-effective model for evaluation of those heat effects is needed to refine the manufacturing process and provides insights into the product design and heat treatment. In this study, the layer heating method and sophisticated track-layer scanning method were applied to simulate the thermo-mechanical response of IN625 tube parts built by LPBF. Based on the similarity of temperature field in each layer deposit, a swept mesh was constructed to perform the thermal analysis for top layer, with the rest of layers referring to the temperature by node number offsetting. A novel explicit finite element analysis code accelerated by graphics processing unit was used for the massive-element numerical analysis. The computational accuracy and efficiency of the layer heating and track-layer scanning methods were compared in detail. It is shown that layer heating method can efficiently capture the pattern of stress distribution with reasonable accuracy in stress magnitude. The grouped track-layer scanning method can predict the residual stress and strain more accurately at a higher cost (5 ~ 10×). The elastic strain distribution was compared with the measurement by X-ray diffraction, confirming the accuracy of residual stress prediction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of powder layer thickness on the microstructural development of additively manufactured SS316

By Increasing the powder layer thickness we could increase material deposition rates and reduce build times during laser powder bed fusion (LPBF). However, increasing the powder layer thickness could also negatively affect the local melting and subsequent microstructure of the printed material. This study systematically investigated, for the first time, the defect evolution and microstructural changes of LPBF stainless steel 316 (SS316) processed by using various powder layer thicknesses of 40, 80, and 120 μm while also varying the laser dwell time for the pulsed laser. Through image analysis, the pore density was found to increase with increasing powder layer thickness, particularly when the dwell time was too high or too low. The maximum achievable density (>99%) was found over a wide processing window when using the smallest powder layer thickness of 40 μm between dwell times of 60 and 100 μs. Increasing the powder layer thicknesses to 80 and 120 μm resulted in maximum densities of 98.7 and 96.8%, respectively, but the window for acceptable laser dwell times that could achieve these densities narrowed considerably. A microstructural analysis of the melt pools was performed to measure the melt pool depths and widths, both of which increased with increasing dwell time. However, increasing the powder layer thickness did not affect the melt pool depth and only minorly affected the width. A sub-grain cellular structure distinguished the melt pool boundaries. The cell size increased with increasing dwell time and decreasing powder layer thickness. Moreover, the cell size was used to calculate a cooling rate that had a magnitude of 10 7 K/s and increased with increasing powder layer thickness.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Reaction Layer Formation on MgO in the Presence of Humidity

Mineralization by MgO is an attractive potential strategy for direct air capture (DAC) of CO 2 due to its tendency to form carbonate phases upon exposure to water and CO 2 . Hydration of MgO during this process is typically assumed to not be rate limiting, even at ambient temperatures. However, surface passivation by hydrated phases likely reduces the CO 2 capture capacity. Here, we examine the initial hydration reactions that occur on MgO(100) surfaces to determine whether they could potentially impact CO 2 uptake. We first used atomic force microscopy (AFM) to explore changes in reaction layers in water (pH = 6 and 12) and MgO-saturated solution (pH = 11) and found the reaction layers on MgO are heterogeneous and nonuniform. To determine how relative humidity (R.H.) affects reactivity, we reacted samples at room temperature in nominally dry N 2 (~11–12% R.H.) for up to 12 h, in humid (>95% R.H.) N 2 for 5, 10, and 15 min, and in air at 33 and 75% R.H. for 8 days. X-ray reflectivity and electron microscopy analysis of the samples reveal that hydrated phases form rapidly upon exposure to humid air, but the growth of the hydrated reaction layer slows after its initial formation. Reaction layer thickness is strongly correlated with R.H., with denser reaction layers forming in 75% R.H. compared with 33% R.H. or nominally dry N 2 . The reaction layers are likely amorphous or poorly crystalline based on grazing incidence X-ray diffraction measurements. After exposure to 75% R.H. in air for 8 days, the reaction layer increases in density as compared to the sample reacted in humid N 2 for 5–15 min. Further, this may represent an initial step toward the crystallization of the reaction layer. Overall, high R.H. favors the formation of a hydrated, disordered layer on MgO. Based on our results, DAC in a location with a higher R.H. will be favorable, but growth may slow significantly from initial rates even on short timescales, presumably due to surface passivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultra-thin passivation layers in Cu(In,Ga)Se 2 thin-film solar cells: full-area passivated front contacts and their impact on bulk doping

In the search for highly transparent and non-toxic alternative front layers replacing state-of-the-art CdS in Cu(In,Ga)Se 2 thin-film solar cells, alternatives rarely exceed reference devices in terms of efficiency. Full-area ultra-thin aluminium oxide tunnelling layers do not require any contact patterning and thus overcome the main drawback of insulating passivation layers. Even a few monolayers of aluminium oxide can be deposited in a controlled manner by atomic layer deposition, they show excellent interface passivation properties, low absorption, and suitable current transport characteristics on test devices. Depositing a ZnO-based transparent front contact, however, results in extremely poor solar cell performance. The issue is not necessarily a low quality of the alternative front layer, but rather the intricate relation between front layer processing and electronic bulk properties in the absorber layer. We identify three challenges critical for the development of novel front passivation approaches:(i) both Cd and Zn impurities beneficially reduce the high native net dopant concentration in the space charge region, (ii) sputter deposition of ZnO damages the passivation layer resulting in increased interface recombination, (iii) thermal treatments of devices with ZnO layer result in substantial Zn diffusion, which can penetrate the full absorber thickness already at moderate temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Epitaxially Grown Single-Crystalline SrTiO 3 Membranes Using a Solution-Processed, Amorphous SrCa 2 Al 2 O 6 Sacrificial Layer

Water-soluble sacrificial layers based on epitaxially-grown, single crystalline (Ca, Sr, Ba) 3 Al 2 O 6 layer are widely used for creating free-standing perovskite oxide membranes. However, obtaining these sacrificial layers with intricate stoichiometry remains a challenge, especially for molecular beam epitaxy (MBE). In this study, we demonstrate the hybrid MBE growth of epitaxial, single crystalline SrTiO 3 films using a solution processed, amorphous SrCa 2 Al 2 O 6 sacrificial layer onto SrTiO 3 (001) substrates. Prior to the growth, the oxygen plasma exposure was used to first create the crystalline SrCa 2 Al 2 O 6 layer with well-defined surface crystallinity. Utilizing reflection high energy electron diffraction, x-ray diffraction, and atomic force microscopy, we observe an atomic layer-by-layer growth of epitaxial, single crystalline SrTiO 3 film on the SrCa 2 Al 2 O 6 layer with atomically smooth surfaces. The SrCa 2 Al 2 O6 layer was subsequently dissolved in de-ionized water to create free-standing SrTiO3 membranes that were transferred onto a metal-coated Si wafer. Membranes created with Sr-deficiency revealed ferroelectric-like behavior measured using piezo force microscopy whereas stoichiometric films remained paraelectric-like. Furthermore, these findings underscore the viability of using ex-situ deposited amorphous SrCa2Al2O6 for epitaxial, single crystalline growth, as well as the importance of point defects in determining the ferroic properties in membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of aqueous solution pH on network structure of corrosion–induced surface layers of boroaluminosilicate glass

Understanding of the long-term stability of vitrified nuclear waste glass is critical to its safe storage, but knowledge gaps remain regarding the corrosion mechanism, especially with respect to surface alteration layers whose presence changes the observed corrosion rates. Here, we report the aqueous corrosion of a model boroaluminosilicate glass at ground water relevant pHs as investigated by vibrational spectroscopy to understand the network structure of the alteration layer that we hypothesize controls the corrosion rates. Both specular reflection infrared spectroscopy and infrared variable angle spectroscopic ellipsometry were used to elucidate details of the structure of the alteration layers formed at pH 7 and pH 9. After 2312 days, the thickness of the alteration layer is found to be ~2000 nm for corrosion at pH 7 and ~300 nm for corrosion at pH 9. Here, the interpretation of the vibrational spectra suggests that alteration layers formed at pH 7 and pH 9 both exhibit a porous network with "silica-like" structures, but with differences in the bond lengths and bond angles in the glass network. Moreover, the relative abundance of the hydrous species within the porous network appears to be dependent on pH. Additionally, the spectroscopic data suggest that the B and Ca trapped in the alteration layer during the secondary corrosion of the pH 9 pre-corroded sample in pH 3 solution are hydrated within the nano-porous layer and not bound to the silicate network. However, the precise chemical form remains to be determined. Based on these findings, we propose that the combination of the network structure of the alteration layer and the relative abundance of hydrous species within the alteration layer act to control the transport of ionic species dissolved from the reaction front to the aqueous solution outside the glass.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Modeling Single and Two-Phase Transport in Thin Porous Layers Using a Composite Continuum-Pore Network Formulation

In this work, a composite continuum-pore network formulation is presented to model single and two-phase transport thin porous layers, such as gas diffusion layers in polymer electrolyte fuel cells (PEFCs) and active electrodes in redox flow batteries (RFBs). The formulation can be integrated into CFD codes, thus combining the ease of implementation of continuum-based modeling and the computational power of pore-network modeling. The composite model includes a control volume (CV) mesh at the layer scale, which embeds a cubic pore network [1,2]. The pore-network model is used to determine analytically local anisotropic effective transport properties (local effective diffusivity and permeability), which are mapped onto the CV mesh to simulate transport in the porous transport layer [3,4]. Good agreement is found between the predicted global effective transport properties (global effective diffusivity and permeability) under dry and wet conditions and previous experimental data reported in the literature for Toray TGP-H series carbon paper. Water saturation distributions are also compared with results obtained using X-ray computed tomography [4]. [1] P.A. García-Salaberri, I.V. Zenyuk, J.T. Gostick, A.Z. Weber, Modeling Gas Diffusion Layer in Polymer Electrolyte Fuel Cells Using a Continuum-Based Pore-Network Formulation, ECS Trans. 97 (2020) 615. [2] P.A. García-Salaberri, Modeling diffusion and convection in thin porous transport layers using a composite continuum-network model: Application to gas diffusion layers in polymer electrolyte fuel cells, Int J. Heat Mass Transf. (2020), submitted. [3] P.A. García-Salaberri, J.T. Gostick, G. Hwang, A.Z. Weber, M. Vera, Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: Effect of local saturation and application to macroscopic continuum models, J. Power Sources 296 (2015) 440–453. [4] P.A. García-Salaberri, G. Hwang, M. Vera, A.Z. Weber, J.T. Gostick, Effective diffusivity in partially-saturated carbon-fiber gas diffusion layers: Effect of through-plane saturation distribution, Int. J. Heat Mass Transf. 86 (2015) 319–333.

Garcia-Salaberri, Pablo↗
DOE OSTI2023

Comparing measurements of the mixing layer height to modeled values

The mixing layer height (MLH) is the top layer of turbulent mixing within the lower atmosphere, above the Earth’s surface. Estimates of the mixing layer height allow us to determine the volume available for the dispersion of pollutants throughout the atmosphere. Our goal is to identify the most suitable mixing layer height input for our dispersion modeling tool (AERMOD). For this project we evaluated two different methods of estimating the local mixing layer height. First, we use 3 estimates of the mixing layer height obtained from a ceilometer, each height estimate corresponds to a different gradient in aerosol backscatter which is used as a proxy for mixing layer height identification. Second, we use AERMET, our AERMOD modeling system preprocessor for meteorological data, which estimates the mixing layer height using several equations combined with measured meteorological data. We evaluate the ceilometer and AERMET estimates over a 5-year period (2015-2019) to see how well aligned the estimated mixing layer heights are. Our results suggest that our model, AERMET, is on average, aligned with ceilometer estimates during the daytime hours. However, daily maximum MLH estimates by AERMET occur earlier in the day than those estimated by the ceilometer. We believe that the ceilometer struggles with accurately measuring the MLH during nighttime hours as a result of sensor limitations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Methods of forming interdigitated back contact layers

Methods of forming interdigitated back contact (IBC) layers are provided. According to an aspect of the invention, a first layer having alternating regions of n-type amorphous hydrogenated silicon and p-type amorphous hydrogenated silicon is formed on a second layer of intrinsic amorphous hydrogenated silicon. The first layer and the second layer are then annealed, such that dopants from the first layer diffuse into the second layer, and the first layer and the second layer crystallize into polysilicon.

14 SOLAR ENERGY↗
DOE OSTI2020

Fabrication of stable electrode/diffusion barrier layers for thermoelectric filled skutterudite devices

Disclosed are methods for the manufacture of n-type and p-type filled skutterudite thermoelectric legs of an electrical contact. A first material of CoSi2 and a dopant are ball-milled to form a first powder which is thermo-mechanically processed with a second powder of n-type skutterudite to form a n-type skutterudite layer disposed between a first layer and a third layer of the doped-CoSi2. In addition, a plurality of components such as iron, and nickel, and at least one of cobalt or chromium are ball-milled form a first powder that is thermo-mechanically processed with a p-type skutterudite layer to form a p-type skutterudite layer “second layer” disposed between a first and a third layer of the first powder. The specific contact resistance between the first layer and the skutterudite layer for both the n-type and the p-type skutterudites subsequent to hot-pressing is less than about 10.0 μΩ·cm2.

Jie, Qing↗
DOE OSTI2021

Solar cell comprising an oxide-nanoparticle buffer layer and method of fabrication

A buffer layer for protecting an organic layer during high-energy deposition of an electrically conductive layer is disclosed. Buffer layers in accordance with the present invention are particularly well suited for use in perovskite-based single-junction solar cells and double-junction solar cell structures that include at least one perovskite-based absorbing layer. In some embodiments, the buffer layer comprises a layer of oxide-based nanoparticles that is formed using solution-state processing, in which a solution comprising the nanoparticles and a volatile solvent is spin coated onto a structure that includes the organic layer. The solvent is subsequently removed in a low-temperature process that does not degrade the organic layer.

Bush, Kevin Alexander↗
DOE OSTI2021

Mutli-layered neutron detector

A neutron detector including a plurality of layers of converter material and a plurality of layers of detector material. Each layer of converter material can be immediately adjacent to at least one layer of detector material and each layer of detector material can be immediately adjacent to at least one layer of converter material. The neutron detector may further include a read out integrated circuit (ROIC) that is electrically coupled to the plurality of layers of detector material. A value output by the ROIC may be indicative of a neutron interacting with a layer of converter material from amongst the plurality of layers of converter material.

Rice, William Charles↗