Search NASA⌕ Search

SEARCH · Search NASA

Results for “limestone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC)

This paper reports strategies to design the binder phase of ultra-high performance concretes (UHPC) from commonly available cement replacement (fly ash, slag, microsilica, metakaolin) and fine filler (limestone) materials. A packing algorithm is used to extract the number density, mean centroidal distance, and coordination number of the microstructure. Similarly, rheological studies on the pastes provide yield stress, plastic viscosity, and min-slump spread. The selection criteria involves using the three microstructural and three rheological parameters individually or in combination to define packing and flow coefficients. The selection criteria is flexible enough to allow users modify the constraints depending on the application. In this study, only ternary and quaternary blends, with a total cement replacement of 30% by mass are selected for further characterization. The highly efficient microstructural packing in these mixtures and better workability that facilitated dispersion of particles to enhance the reactivity results in beneficial pore structure and mechanical properties.

36 MATERIALS SCIENCE↗

Estimating the mechanical properties of hydrating blended cementitious materials: An investigation based on micromechanics

The hydration model of Parrot & Killoh (1984) has been extended to blended cements and coupled to a micromechanical scheme similar to that of Pichler & Hellmich (2011) to estimate the Young modulus and the compressive strength of cementitious materials as a function of time. A finite aspect ratio of 7 is introduced to describe the shape of the hydrates and improve the estimate of the early age strength by the micromechanical scheme. Furthermore, accounting for the stress fluctuations in the cement paste partly explains the fact that the compressive strength of a concrete can be lower than that of its cement paste. Finally, the estimated physical properties are compared to numerous experimental measurements from the literature and new experimental measurements on blended cement pastes featuring significant weight fractions of limestone filler, fly ash or silica fume. It is shown that the present model slightly overestimates the dilution effect.

36 MATERIALS SCIENCE↗

Determination of the amount of reacted metakaolin in calcined clay blends

This paper presents a comparative study of three methods to determine the amount of reacted metakaolin in calcined clay blends: mass balance, thermodynamic modelling, and the Partial or not Known Crystalline Structure method (PONKCS) based on Rietveld analysis of X-ray diffraction. The methods are applied to Limestone calcined clay cements (LC{sup 3}-50) in this study. Mass balance and thermodynamic modelling results show good agreement, especially at early age. PONKCS method shows globally comparable results, even if it has higher variability. The precision of PONKCS becomes poor for blends with <60% of metakaolin in calcined clay.

36 MATERIALS SCIENCE↗

Changes in microstructure characteristics of cement paste on carbonation

This study investigates the influence of carbonation on the microstructure of cement paste cast with Ordinary Portland Cement (OPC), fly ash based Portland Pozzolana Cement (PPC) and Limestone Calcined Clay Cement (LC{sup 3}) using X-ray diffraction (XRD), thermal analysis (TGA), scanning electron microscope (SEM) and mercury intrusion porosimeter (MIP). A comparison is made between samples exposed to 3% carbon dioxide concentration and those exposed to natural CO{sub 2} concentrations. It is observed that the products formed on carbonation are similar in both the exposure conditions. Distinct rims corresponding to decalcified C-S-H are observed around clinker grains in the carbonated samples. Coarsening of pore structure is observed on carbonation in all the cements and an increase in the total porosity is observed in blended cements. Thermodynamic modeling indicates irrespective of the type of cement the total solid volume is reduced on complete carbonation. The volume change occurring on carbonation obtained from experimental results and thermodynamic modeling are compared.

36 MATERIALS SCIENCE↗

Unravelling chloride transport/microstructure relationships for blended-cement pastes with the mini-migration method

A chloride mini-migration method is proposed to estimate effective diffusion coefficients at the scale of the cement paste and to investigate mechanisms with complementary microstructure analyses on the same material. Blended-cement pastes with a wide range of properties were investigated in this study: systems at w/b = 0.3–0.5 including Portland cement, white Portland cement, slag-Portland cement, fly ash, glass powder, and/or limestone and calcined clay. Comparisons showed the relative and combined importance of three main parameters on the effective diffusion coefficient: the porosity, the pore connectivity parameter and the conductivity of the pore solution (low values of the latter two are generally key aspects of the high resistance of blended-cement systems against chloride ingress). Notably, a general correlation for all the investigated systems was established between the effective diffusion coefficient and the bulk conductivity (whereas no simple correlation was observed between the effective diffusion coefficient and the formation factor or the pore connectivity parameter).

36 MATERIALS SCIENCE↗

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗

Probing the exact form and doping preference of magnesium in ordinary Portland cement clinker phases: A study from experiments and DFT simulations

Highlights: • The doping behaviors of Mg in OPC clinker phases were systematically studied. • About 1.3 wt% MgO enter OPC clinker phases by forming substitutional solid solutions. • In the 4 composed minerals, C{sub 3}S, C{sub 3}A and C{sub 4}AF can host more Mg ions than C{sub 2}S. • Mg ions prefer to replace Ca in C{sub 3}S, C{sub 2}S and C{sub 3}A while replace Fe and Ca in C{sub 4}AF. • Both the large structure distortions and formation energies governs the low solubility. A systematic study was performed to learn the exact existence form and doping behaviors of magnesium in ordinary Portland cement (OPC) clinker. Our results show that about 1.3 wt% MgO incorporates into OPC clinker phases by forming substitutional solid solutions while excess Mg accumulate and exist as periclase. Results from Rietveld refinement present a substitution preference in C{sub 3}S and C{sub 3}A over C{sub 2}S. More in-depth analyses from density function theoretical simulations show that in C{sub 3}S, C{sub 2}S and C{sub 3}A, the substitution occurs by replacing Ca while in C{sub 4}AF, it probably occurs by substituting Fe and Ca ions. The large structure distortions and sharp increase in formation energies with increasing MgO determines its low solubility. This work provides a clear understanding of the existence states and the intrinsic mechanism governing doping behaviors of Mg, thus should be very important in guiding the synthesis of OPC clinker by utilizing high-Mg limestone.

36 MATERIALS SCIENCE↗

Boosting the use of bauxite residue (red mud) in cement - Production of an Fe-rich calciumsulfoaluminate-ferrite clinker and characterisation of the hydration

Highlights: • Incorporation of 35 wt% of bauxite residue for production of CSAF clinker • Thermochemical calculations as suitable tool for predicting phase assemblage • Hydration of the cement was found to be accelerated in contrast to other CSA cements. • High early compressive strengths of 40 MPa In the present work, calciumsulfoaluminate-ferrite clinker was produced using 35 wt% of bauxite residue in combination with alumina, clay, limestone and gypsum. At a temperature of 1300 °C, the hydraulic phases ye'elimite, ferrite and C{sub 2}S were formed. Computed thermochemical predictions were a significantly better match for the real mineralogy than modified Bogue equations. Hydration of the clinker led to the formation of ettringite and monosulfate, resulting in compressive strengths of 17 MPa after 28d. Compressive strengths of 40 MPa after 2d, and 28d-strengths exceeding 50 MPa, were reached in blends with 10 wt% of anhydrite. The strength development was due to the rapid formation of ettringite, mainly originating from ye'elimite, which did not convert to AFm phases and led to a compact microstructure. Only when the ye'elimite dissolution decreased, did the ferrite phase react. In pastes with additional sulfates, ferrite hydration led to the formation of ettringite and to hydrogarnet. Cement nomenclature is used in this work.{sup 1}.

36 MATERIALS SCIENCE↗

Formulation of low clinker blended cements and concrete with enhanced fresh and hardened properties

Blended cements appear as the most promising way to massively produce cements with reduced environmental footprints. However, considering the generally lower early mechanical performance of highly blended cements, chemical admixtures are increasingly relied upon to increase early strength. However, in many cases this can negatively impact other properties as rheology and durability. This paper proposes an approach to formulate low clinker cements and concrete using moderate alkali activation or gypsum to enhance early and long-term compressive strength, without inducing excessive alkali-silica reaction (ASR) expansion. It examines blended cements containing burnt oil shale along with limestone and fly ash or slag as supplementary cementitious materials. It optimizes the combination of polycarboxylate ether (PCE) superplasticizers with the strength enhancers. Along with the use of Ca(NO{sub 3}){sub 2} to drive PCE adsorption, this provides good rheology control, increased early and long-term compressive strength, as well as acceptable ASR expansion in cements with only 50% clinker.

36 MATERIALS SCIENCE↗

Effects of gamma-sterilization on the physico-chemical properties of natural sediments

A series of experiments were completed to determine the effects of soil sterilization on various soil chemical properties including U(VI) sorption, soil pH, natural organic matter (NOM), cation exchange capacity (CEC), and iron oxidation state. Soils under investigation were a saprolitic sequence of interbedded weathered shale and limestone collected from the Oak Ridge Reservation (ORR). Sediments were sterilized by either steam sterilization at 121oC or by γ-irradiation using a cobalt-60 source. Subsamples of sediments were pretreated with dithionate-citrate-bicarbonate (DCB) and/or H2O2 to remove reducible Fe(III) oxides and NOM. Results from aerobic U(VI) sorption experiments indicated that γ-sterilized sediments sorbed more U(VI) compared to non-sterile sediments. Results from sorption experiments completed using DCB and H2O2-treated samples indicated that the iron oxide and NOM fractions of the sediment accounted for the majority of U(VI) sorption and that γ-irradiation of these phases resulted in increased sorption of U(VI). Mössbauer spectra of γ-sterilized sedimentsdisplayed a decrease in the amount of ferric iron associated with goethite and a small increase in the amount of reduced iron in silicate minerals compared to spectra from non-sterile samples. Our results suggest that sterilization by γ-irradiation induced iron reduction that may have increased sorption of U(VI) on these sediments.

54 ENVIRONMENTAL SCIENCES↗

Crack width control and mechanical properties of low carbon engineered cementitious composites (ECC)

Engineered Cementitious Composites (ECC) have superior properties with high tensile ductility and tight crack width compared to conventional concrete. The properties of ECC are significantly influenced by the material composition which can be tailored to enhance the sustainability of ECC. Towards this goal, recycled crumb rubber (CR) and silica fume (SF) were used to tailor the properties of a polypropylene-fiber reinforced ECC with a low carbon binder based on limestone calcined clay cement (LC3) in this study. Crumb rubber was found to be effective in enhancing strain-hardening performance and reducing the width of the multiple microcracks. However, a loss of compressive strength was accompanied by an increasing amount of CR. While silica fume or lower w/b ratio enhanced the compressive strength, the crack width of ECC increased at higher SF content or lower w/b. The underlying mechanisms of these trends were traced to the alteration of the matrix fracture toughness and fiber/matrix interfacial bond. Rubber particle bridging was found to contribute to crack width control. Finally, the combined use of the LC3 green binder and CR led to a lowering of the embodied and operational carbon footprint of ECC.

36 MATERIALS SCIENCE↗

Design assessment of a 150 kWt CFBC Test Unit

For clean and efficient energy generation from coal, the most suitable technology known to date is 'Fluidized Bed Combustion' technology. Applications of circulating fluidized bed (CFB) combustion technology have been steadily increasing in both capacity and number over the past decade. Designs of these units have been based on the combustion tests carried out in pilot scale facilities to determine the combustion and desulfurization characteristics of coal and limestone reserves in CFB conditions. Similarly, utilization of Turkish lignites in CFB boilers necessitates adaptation of CFB combustion technology to these resources. However, the design of these test units are not based on firing coals with high ash, volatile matter and sulfur contents like Turkish lignites. For this purpose, a 150 kWt CFB combustor test unit is designed and constructed in Chemical Engineering Department of Middle East Technical University, based on the extensive experience acquired at the existing 0.3 MWt Bubbling Atmospheric Fluidized Bed Combustor (AFBC) Test Rig. Following the commissioning tests, a combustion test is carried out for investigation of combustion characteristics of Can lignite in CFB conditions and for assessment of the design of test unit. Comparison of the design outputs with experimental results reveals that most of the predictions and assumptions have acceptable agreement with the operating conditions. In conclusion, the performance of 150 kWt CFBC Test Unit is found to be satisfactory to be utilized for the long term research studies on combustion and desulfurization characteristics of indigenous lignite reserves in circulating fluidized bed combustors. (author)

01 COAL, LIGNITE, AND PEAT↗

Formation of Zn-rich Phyllosilicate, Zn-Layered Double Hydroxide and Hydrozincite in Contaminated Calcareous Soils

Recent studies demonstrated that Zn-phyllosilicate- and Zn-layered double hydroxide-type (Zn-LDH) precipitates may form in contaminated soils. However, the influence of soil properties and Zn content on the quantity and type of precipitate forming has not been studied in detail so far. In this work, we determined the speciation of Zn in six carbonate-rich surface soils (pH 6.2-7.5) contaminated by aqueous Zn in the runoff from galvanized power line towers (1322-30,090 mg/kg Zn). Based on 12 bulk and 23 micro-focused extended X-ray absorption fine structure (EXAFS) spectra, the number, type and proportion of Zn species were derived using principal component analysis, target testing, and linear combination fitting. Nearly pure Zn-rich phyllosilicate and Zn-LDH were identified at different locations within a single soil horizon, suggesting that the local availabilities of Al and Si controlled the type of precipitate forming. Hydrozincite was identified on the surfaces of limestone particles that were not in direct contact with the soil clay matrix. With increasing Zn loading of the soils, the percentage of precipitated Zn increased from {approx}20% to {approx}80%, while the precipitate type shifted from Zn-phyllosilicate and/or Zn-LDH at the lowest studied soil Zn contents over predominantly Zn-LDH at intermediate loadings to hydrozincite in extremely contaminated soils. These trends were in agreement with the solubility of Zn in equilibrium with these phases. Sequential extractions showed that large fractions of soil Zn ({approx}30-80%) as well as of synthetic Zn-kerolite, Zn-LDH, and hydrozincite spiked into uncontaminated soil were readily extracted by 1 M NH4NO3 followed by 1 M NH4-acetate at pH 6.0. Even though the formation of Zn-precipitates allows for the retention of Zn in excess to the adsorption capacity of calcareous soils, the long-term immobilization potential of these precipitates is limited.

54 ENVIRONMENTAL SCIENCES↗

Sodium diffusion in heterogeneous porous media: Connecting laboratory experiments and simulations

Sodium has been suggested as a tracer for brine in reservoir formations where a significant amount of sodium ion is found mainly in the aqueous phase. Fortunately, the most abundant sodium isotope, 23 Na, is Nuclear Magnetic Resonance (NMR) active, making it possible to study the structure and dynamical properties of both bulk and pore confined fluid systems. We investigated the diffusion of key dissolved sodium species in bulk solution and porous media as a function of composition, ionic strength, and permeability of the carbonate samples using NMR relaxometry and pulsed-field gradient (PFG) NMR techniques. We use Indiana limestone as an example of natural porous media and water as a freely diffusible tracer and carrier. We demonstrate apparent diffusion measurement of sodium based on changes in spin–spin relaxation time (T 2 ) signal in pore confinement. The diffusion rate of sodium decreases with increasing counter-ion size. This effect is greater at higher ionic strengths and lower chemical potentials in porous media. The reactive transport code, CrunchFlow, was used to complement the NMR experiments to simulate diffusion behavior in porous media. Combining these two methods provides a powerful approach to estimating effective diffusion coefficients in heterogeneous matrices. The modeling considers the influence of physical properties (porosity and tortuosity) and chemical properties (geochemical composition and chemical gradients). The results presented in this work highlight the advantage of measuring apparent diffusivity using NMR T 2 relaxometry in conjunction with numerical simulation to derive effective diffusivity and the corresponding matrix properties (i.e., tortuosity) of the system.

58 GEOSCIENCES↗

Biogeochemistry of Two Types of Permeable Reafctive Barriers, Organic Carbon and Iron-bearing Organic Carbon for Mine Drainage treatment: Column experiments

Permeable reactive barriers (PRBs) are an alternative technology to treat mine drainage containing sulfate and heavy metals. Two column experiments were conducted to assess the suitability of an organic carbon (OC) based reactive mixture and an Fe{sup 0}-bearing organic carbon (FeOC) based reactive mixture, under controlled groundwater flow conditions. The organic carbon mixture contains about 30% (volume) organic carbon (composted leaf mulch) and 70% (volume) sand and gravel. The Fe{sup 0}-bearing organic carbon mixture contains 10% (volume) zero-valent iron, 20% (volume) organic carbon, 10% (volume) limestone, and 60% (volume) sand and gravel. Simulated groundwater containing 380 ppm sulfate, 5 ppm As, and 0.5 ppm Sb was passed through the columns at flow rates of 64 (the OC column) and 62 (the FeOC column) ml d{sup -1}, which are equivalent to 0.79 (the OC column) and 0.78 (the FeOC column) pore volumes (PVs) per week or 0.046 m d{sup -1} for both columns. The OC column showed an initial sulfate reduction rate of 0.4 {mu}mol g (OC){sup -1} d{sup -1} and exhausted its capacity to promote sulfate reduction after 30 PVs, or 9 months of flow. The FeOC column sustained a relatively constant sulfate reduction rate of 0.9 {mu}mol g (OC){sup -1} d{sup -1} for at least 65 PVs (17 months). In the FeOC column, the {delta}34S values increase with the decreasing sulfate concentration. The {delta}34S fractionation follows a Rayleigh fractionation model with an enrichment factor of 21.6%. The performance decline of the OC column was caused by the depletion of substrate or electron donor. The cathodic production of H{sub 2} by anaerobic corrosion of Fe probably sustained a higher level of SRB activity in the FeOC column. These results suggest that zero-valent iron can be used to provide an electron donor in sulfate reducing PRBs. A sharp increase in the {delta}13C value of the dissolved inorganic carbon and a decrease in the concentration of HCO{sub 3}{sup -} indicate that hydrogenotrophic methanogenesis is occurring in the first 15 cm of the FeOC column.

36 MATERIALS SCIENCE↗

Solid looping cycles: A new technology for coal conversion

This article examines both oxygen looping cycles (otherwise known as chemical looping combustion), and lime-based CO{sub 2} looping cycles, where calcined limestone is used for in situ CO{sub 2} capture. There has been a rapid rise in the amount of research carried out recently, and both technologies are likely to see practical application in the near future. However, these technologies urgently require demonstration at the large pilot-plant level - in the case of chemical looping cycles for use with high-pressure syngas of the type likely to be produced by current coal gasification technologies and in the case of CO{sub 2} looping cycles both for combustion and gasification applications with coal. Both approaches have potential for application in schemes for H{sub 2} production, but these have not been considered here, although such applications will also inevitably follow in the medium to long term.

01 COAL, LIGNITE, AND PEAT↗

Effect of partial carbonation on the cyclic CaO carbonation reaction

CaO particles from the calcination of natural limestones can be used as regenerable solid sorbents in some CO{sub 2} capture systems. Their decay curves in terms of CO{sub 2} capture capacity have been extensively studied in the literature, always in experiments allowing particles to reach their maximum carbonation conversion for a given cycle. However, at the expected operating conditions in a CO{sub 2} capture system using the carbonation reaction, a relevant fraction of the CaO particles will not have time to fully convert in the carbonator reactor. This work investigates if there is any effect on the decay curves when CaO is only partially converted in each cycle. Experiments have been conducted in a thermobalance arranged to interrupt the carbonation reaction in each cycle before the end of the fast reaction period typical in the CaO-CO{sub 2} reaction. It is shown that, after the necessary normalization of results, the effective capacity of the sorbent to absorb CO{sub 2} during particle lifetime in the capture system slightly increases and CaO particles partially converted behave 'younger' than particles fully converted after every calcination. This has beneficial implications for the design of carbonation/calcination loops.

01 COAL, LIGNITE, AND PEAT↗