SEARCH · Search NASA

Results for “lithium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Lithium-ion hopping weakens thermal stability of LiPF 6 carbonate electrolytes

Lithium hexafluorophosphate (LiPF 6 )-based carbonate electrolytes are widely used in commercial lithium-ion batteries (LIBs), but their thermal instability limits the cycle life and safety of LIBs at elevated temperatures. Few studies have yielded insight into the initial PF 6 — decomposition reaction that promotes thermal instability of LiPF6-based electrolytes. Here, we find that lithium-ion hopping assisted by the overall reorientational motion of propylene carbonate molecules facilitates PF 6 — decomposition at elevated temperatures in 1 M LiPF 6 /propylene carbonate electrolyte. Further, we demonstrate that urea additives, by preventing lithium-ion hopping, suppress the initial LiPF 6 decomposition reaction and enhance the thermal stability of the electrolyte. LIB cell tests with LiNi 0.6 Mn 0.2 Co 0.2 O 2 ||Li 4 Ti 5 O 12 show improved LIB performance at elevated temperatures with the thermally stabilized electrolyte. This study provides key insights into the design of thermally stable LiPF 6 -based carbonate electrolytes for improving the cycle life, calendar life, and safety of LIBs in elevated-temperature applications.

25 ENERGY STORAGE↗

DOE OSTI2025

Seamless aperture and length enlargement of single crystalline materials for high-energy laser applications

An optically seamless method for increasing the aperture or length of nonlinear materials has been developed, which is suitable for optics in high energy laser systems and other applications. Differences between aperture and length scaling are analyzed. Bonding of component pairs of a nonlinear crystal, lithium tri-borate, is experimentally demonstrated by GAMDAN Optics Inc. and tested at the Laboratory of Laser Energetics at the University of Rochester. Here, a bonded crystal is shown to deliver beam quality and second harmonic conversion efficiency that is equivalent to that of a monolithic crystal of similar dimensions.

aperture scaling↗

DOE OSTI2023

Rational Design of Fluorinated Electrolytes for Low Temperature Lithium‐Ion Batteries

Abstract Nonaqueous carbonate electrolytes are commonly used in commercial lithium‐ion battery (LIB). However, the sluggish Li + diffusivity and high interfacial charge transfer resistance at low temperature (LT) limit their wide adoption among geographical areas with high latitudes and altitudes. Herein, a rational design of new electrolytes is demonstrated, which can significantly improve the low temperature performance below −20 °C. This electrolyte is achieved by tailoring the chemical structure, i.e., altering the fluorination position and the degree of fluorination, of ethyl acetate solvent. It is found that fluorination adjacent to the carbonyl group or high degree of fluorination leads to a stronger electron‐withdrawing effect, resulting in low atomic charge on the carbonyl oxygen solvating sites, and thus low binding energies with Li + ions at LT. The optimal electrolyte 2,2,2‐trifluoroethyl acetate (EA‐f) shows significantly improved cycle life and C‐rate of a NMC622/graphite cell when cycled at −20 °C and −40 °C, respectively. In addition to superior LT performance, the electrolyte is nonflammable and tolerant for high voltage charging all owing to its fluorine content. This work provides guidance in designing next‐generation electrolytes to address the critical challenge at subzero temperatures.

25 ENERGY STORAGE↗

DOE OSTI2023

Binding of Li + to Negatively Charged and Neutral Ligands in Polymer Electrolytes

Conceptually, single-ion polymer electrolytes (SIPE) with the anion bound to the polymer could solve major issues in Li-ion batteries, but their conductivity is too low. Experimentally, weakly interacting anionic groups have the best conductivity. To provide a theoretical basis for this result, density functional theory calculations of the optimized geometries and energies are performed for charged ligands used in SIPE. Comparison is made to neutral ligands found in dual-ion conductors, which demonstrate higher conductivity. Further, the free energy differences between adding and subtracting a ligand are small enough for the neutral ligands to have the conductivity seen experimentally. However, charged ligands have large barriers, implying that lithium transport will coincide with the slow polymer diffusion, as observed in experiments. Overall, SIPE will require additional solvent to achieve a sufficiently high conductivity. Additionally, the binding of mono- and bidentate geometries varies, providing a simple and clear reason that polarizable force fields are required for detailed interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Li 21 Ge 8 P 3 S 34 : New Lithium Superionic Conductor with Unprecedented Structural Type

Abstract Lithium superionic conductors are pivotal for enabling all‐solid‐state batteries, which aim to replace liquid electrolytes and enhance safety. Herein, we report the discovery of an unprecedented lithium superionic conductor, Li 21 Ge 8 P 3 S 34 , featuring a novel structural type and a new composition in the Li–Ge–P–S system. This material exhibits high lithium ionic conductivity of approximately 1.0 mS cm −1 at 303 K with a low activation energy of 0.20(1) eV. It's unique crystal structure was elucidated using three‐dimensional electron diffraction (3D ED) and further refined through combined powder X‐ray and neutron diffraction analyses. The structure consists of alternating two‐dimensional slabs: one of corner‐sharing GeS 4 tetrahedra and the other of isolated PS 4 tetrahedra, enabling efficient lithium‐ion transport through a tetrahedrally interconnected network of 1D, 2D, and 3D diffusion pathways. This distinctive structural motif provides a novel design strategy for next‐generation solid electrolytes, broadening the structural landscape of lithium superionic conductors. With further advancements in compositional tuning and interfacial engineering, Li 21 Ge 8 P 3 S 34 could contribute to the development of high‐performance all‐solid‐state batteries.

Chemistry↗

DOE OSTI2022

Anomalous Self-Optimizing Microporous Graphene-Based Lithium-ion Battery Anode from Laser Activation

Explore the source record for details and available documents.

Zhang, Binghao↗

DOE OSTI2022

Electrical resistance of the current collector controls lithium morphology

Abstract The electrodeposition of low surface area lithium is critical to successful adoption of lithium metal batteries. Here, we discover the dependence of lithium metal morphology on electrical resistance of substrates, enabling us to design an alternative strategy for controlling lithium morphology and improving electrochemical performance. By modifying the current collector with atomic layer deposited conductive (ZnO, SnO 2 ) and resistive (Al 2 O 3 ) nanofilms, we show that conductive films promote the formation of high surface area lithium deposits, whereas highly resistive films promote the formation of lithium clusters of low surface area. We reveal an electrodeposition mechanism in which radial diffusion of electroactive species is promoted on resistive substrates, resulting in lateral growth of large (150 µm in diameter) planar lithium deposits. Using resistive substrates, similar lithium morphologies are formed in three distinct classes of electrolytes, resulting in up to ten-fold improvement in battery performance. Ultimately, we report anode-free pouch cells using the Al 2 O 3 -modified copper that maintain 60 % of their initial discharge capacity after 100 cycles, displaying the benefits of resistive substrates for controlling lithium electrodeposition.

25 ENERGY STORAGE↗

DOE OSTI2023

Solvents and catalyst preparations for lithium-oxygen batteries

An electrochemical device includes a lithium anode having a red poly(benzonitrile) coating covering at least a portion of the anode; a separator and an air cathode comprising reduced graphene oxide over gas diffusion layer; and an electrolyte comprising an ether solvent, benzonitrile, and a lithium salt.

Wang, Hsien-Hau↗

DOE OSTI2024

Solvents and catalyst preparations for lithium-oxygen batteries

Wang, Hsien-Han↗

NASA NTRS1971

Damage and recovery characteristics of lithium-containing solar cells.

Damage and recovery characteristics were measured on lithium-containing solar cells irradiated by 1-MeV electrons. Empirical expressions for cell recovery time, diffusion-length damage coefficient immediately after irradiation, and diffusion-length damage coefficient after recovery were derived using results of short-circuit current, diffusion-length, and reverse-bias capacitance measurements. The damage coefficients were expressed in terms of a single lithium density parameter, the lithium gradient. A fluence dependence was also established, this dependence being the same for both the immediate-post-irradiation and post-recovery cases. Cell recovery rates were found to increase linearly with lithium gradient.

Faith, T. J.↗

NASA NTRS1971

Lithium-doped solar cells for space use

Lithium doped p-n solar cells meet the basic requirements for space use. The efficiencies of the Lopex lithium cells which range from 10.5 to 12.8% are equal to or better than C.G. lithium cell and 10 ohms-cm n-p cell efficiencies. Reduction in the stresses introduced during boron diffusion has eliminated cell size restrictions and both 2 x 2 and 2 x 6 cm lithium doped cells have been fabricated. The Ti-Ag contacts which are tested 100% with a tape peel test, and pull tested and humidity tested on a sample basis are comparable to the Ti-Ag contacts on n-p cells.

Payne, P. A.↗

NASA NTRS1971

Some major results of the Fourth Annual Conference on Effects of Lithium Doping on Silicon Solar Cells

Lithium doped silicon solar cells having dimensions as large as 12 sq cm are now possible, due to significantly improved boron-diffusion techniques. A large increase was observed in the short circuit current measured in tungsten light for cells that were fabricated using the improved diffusion techniques as compared with previous cells, indicating a preservation of minority carrier diffusion length in the base region of the former cells. Sintering of the contacts of lithium doped cells fabricated from Lopex silicon resulted in large increases in maximum power, mostly due to an open circuit voltage improvement, over non-sintered cells. Efficiencies as high as 12.8% were observed, with the average efficiency being about 11.9%.

Berman, P. A.↗

DOE OSTI2020

Single-Layer Dititanium Oxide Ti 2 O MOene: Multifunctional Promises for Electride, Anode Materials, and Superconductor

Using the first-principles calculations, we report the existence of the single-layer (SL) dititanium oxide Ti 2 O (labeled as MOene) that constructs a novel family of MXene based on transition-metal oxides. This MOene material strongly contrasts the conventional ones consisting of transition-metal carbides and/or nitrides. SL Ti 2 O has high thermal and dynamical stabilities because of the strong Ti–O ionic bonding interactions. Moreover, this material is an intrinsic electride and exhibits extremely low diffusion barriers of ~12.0 and 6.3 meV for Li and Na diffusion, respectively. When applied as anode materials in lithium-ion batteries and sodium-ion batteries, it possesses a high energy storage capacity (960.23 mAhg –1 ), surpassing the traditional MXenes-based anodes. The superb electrochemical performance stems from the existing anionic electron on Ti 2 O surface. Astonishingly, SL Ti 2 O is also determined to be a superconductor with a superconducting transition temperature (T c ) of ~9.8 K, which originates from the soft-mode of the first acoustic phonon branch and enhanced electron–phonon coupling in the low-frequency region. Furthermore, this soft-mode behaves much softer upon applying a compressive strain of 2%, leading to a higher T c of 11.9 K. Furthermore, our finding broadens the family of MXenes and could facilitate more experimental efforts toward future nanodevices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Lithium extraction composite for recovery of lithium from brines, and process of using said composition

A lithium extraction composite comprising: (i) a porous support and (ii) particles of a lithium-selective sorbent material coated on at least one surface of the support, wherein the support has a planar membrane, fiber (or rod), or tubular shape. A method for extracting and recovering a lithium salt from an aqueous solution by use of the above-described composition is also described, the method comprising (a) flowing the aqueous source solution through a first zone or over a first surface of the lithium extraction composite to result in selective lithium intercalation in the lithium-selective sorbent material in the first zone or first surface; and (b) simultaneously recovering lithium salt extracted in step (a) from said lithium-selective sorbent material by flowing an aqueous stripping solution through a second zone or over a second surface of the lithium extraction composite in which lithium ions from the first zone or first surface diffuse.

Bhave, Ramesh R.↗

DOE OSTI2022

Tritium diffusion and formation in the bulk and defective surface of γ-LiAlO2 pellets: First-principles investigation

In tritium-producing burnable absorber rods (TPBAR), γ-LiAlO2 is used in the form of an annular ceramic pellet enriched with the 6Li isotope. When irradiated in a pressurized water reactor (PWR), the 6Li pellets absorb neutrons and produce tritium (3H) through 6Li + n 3H + α. The 3H chemically reacts with the metal getter where it is captured and leads to formation of a metal hydride. For TPBARs to enable effective tritium production in PWRs, we investigated the 3H diffusion pathways in the bulk and surface of γ-LiAlO2 with different concentrations of lithium defects. The calculated results for bulk and low-index surfaces, thermal conductivity, 3H activation energy barriers, and the 3H diffusion coefficients in γ-LiAlO2 are in good agreement with the available experimental values. In the bulk, our results show that the smallest activation energy barrier is 0.63 eV for substitutional 3H diffusion with a diffusion coefficient of 3.25x10-12 m2/s. After 3H diffused from bulk to the surface, it could form different species (such as 3H2, 3H2O, C3H4) depending on the surface structure, vacancy types and the impurity carbon. Our results indicate that the 3H2 is the main product from γ-LiAlO2 pellets. As the number of VLi vacancies and 3H atoms increases under irradiation (3H-rich condition), 3H2O release could increase from the surface of γ-LiAlO2 pellets.

Jia, Ting↗

NASA NTRS1980

High temperature storage characteristics of lithium sulfur dioxide cells

Hermetically sealed SO2 cells were developed to eliminate SO2 diffusion and its adverse effects on shelf life. A two part barrier coating material was applied to the internal surface of the glass seal and cured under a predetermined thermal profile in order to prevent the self discharge associated with glass seal corrosion.

Watson, T.↗

DOE OSTI2022

Observation of an intermediate state during lithium intercalation of twisted bilayer MoS2

Abstract Lithium intercalation of MoS 2 is generally believed to introduce a phase transition from H phase (semiconducting) to T phase (metallic). However, during the intercalation process, a spatially sharp boundary is usually formed between the fully intercalated T phase MoS 2 and non-intercalated H phase MoS 2 . The intermediate state, i.e ., lightly intercalated H phase MoS 2 without a phase transition, is difficult to investigate by optical-microscope-based spectroscopy due to the narrow size. Here, we report the stabilization of the intermediate state across the whole flake of twisted bilayer MoS 2 . The twisted bilayer system allows the lithium to intercalate from the top surface and enables fast Li-ion diffusion by the reduced interlayer interaction. The E 2g Raman mode of the intermediate state shows a peak splitting behavior. Our simulation results indicate that the intermediate state is stabilized by lithium-induced symmetry breaking of the H phase MoS 2 . Our results provide an insight into the non-uniform intercalation during battery charging and discharging, and also open a new opportunity to modulate the properties of twisted 2D systems with guest species doping in the Moiré structures.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Expandable Li Percolation Network: The Effects of Site Distortion in Cation-Disordered Rock-Salt Cathode Material

Cation-disordered rock-salt (DRX) materials receive intensive attention as a new class of cathode candidates for high-capacity lithium-ion batteries (LIBs). Unlike traditional layered cathode materials, DRX materials have a three-dimensional (3D) percolation network for Li + transportation. The disordered structure poses a grand challenge to a thorough understanding of the percolation network due to its multiscale complexity. In this work, we introduce the large supercell modeling for DRX material Li 1.16 Ti 0.37 Ni 0.37 Nb 0.10 O 2 (LTNNO) via the reverse Monte Carlo (RMC) method combined with neutron total scattering. Here, through a quantitative statistical analysis of the material’s local atomic environment, we experimentally verified the existence of short-range ordering (SRO) and uncovered an element-dependent behavior of transition metal (TM) site distortion. A displacement from the original octahedral site for Ti 4+ cations is pervasive throughout the DRX lattice. Density functional theory (DFT) calculations revealed that site distortions quantified by the centroid offsets could alter the migration barrier for Li + diffusion through the tetrahedral channels, which can expand the previously proposed theoretical percolating network of Li. The estimated accessible Li content is highly consistent with the observed charging capacity. The newly developed characterization method here uncovers the expandable nature of the Li percolation network in DRX materials, which may provide valuable guidelines for the design of superior DRX materials.

25 ENERGY STORAGE↗