Search NASA⌕ Search

SEARCH · Search NASA

Results for “lithium diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Microstructure-dependent rate theory model of defect segregation and phase stability in irradiated polycrystalline LiAlO 2

We report gamma lithium aluminate (LiAlO 2 ) is a breeder material for tritium and is one of key components in a tritium-producing burnable absorber rod (TPBAR). Dissolution and precipitation of second phases such as LiAl 5 O 8 and voids are observed in irradiated LiAlO 2 . Such microstructure changes cause the degradation of thermomechanical properties of LiAlO 2 and affect tritium retention and release kinetics, and hence, the TPBAR performance. In this work, a microstructure-dependent model of radiation-induced segregation (RIS) has been developed for investigating the accumulation of species and phase stability in polycrystalline LiAlO 2 structures under irradiation. Three sublattices (i.e. [Li, Al, V] I [O, V o ] II [Li i , Al i , O i , V i ] III ), and concentrations of six diffusive species (i.e. Li; vacancy of Li or Al at [Li, Al, V] I sublattice, O vacancy at [O, V o ] II sublattice, and Li, Al and O interstitials at [Li i , Al i , O i , V i ] III interstitial sublattices; are used to describe spatial and temporal distributions of defects and chemistry. Microstructure-dependent thermodynamic and kinetic properties including the generation, reaction, and chemical potentials of defects and defect mobility are taken into account in the model. The parametric studies demonstrated the capability of the developed RIS model to assess the effect of thermodynamic and kinetic properties of defects on the segregation and depletion of species in polycrystalline structures and to explain the phase stability observed in irradiated LiAlO 2 samples. The developed RIS model will be extended to study the precipitation of LiAl 5 O 8 and voids and tritium retention by integrating the phase-field method.

36 MATERIALS SCIENCE↗

Crystallographic Insight of Reduced Lattice Volume Expansion in Mesoporous Cu 2+ -Doped TiNb 2 O 7 Microspheres during Li + Insertion

TiNb 2 O 7 represents a promising anode material for lithium-ion batteries (LIBs), but its practical applications are currently hampered by the non-negligible volumetric expansion and contraction during the charge/discharge process and the sluggish ion/electron kinetics. Here a combination technique is reported by systematically optimizing the porous and spherical morphology, crystal structure, and surface decoration of mesoporous Cu 2+ -doped TiNb 2 O 7 microspheres to enhance the electrochemical Li + storage performance and stability simultaneously. The Cu 2+ dopants preferentially replace Ti 4+ in crystal lattices, which decreases the Li + diffusion barrier and increases the electronic conductivity, as confirmed by density functional theory (DFT) calculation and demonstrated by diverse electrochemical characterizations. The successful Cu 2+ doping significantly reduces the lattice expansion coefficient from 7.26% to 4.61% after Li + insertion along the b-axis of TiNb 2 O 7 , as visualized from in situ and ex situ XRD analysis. The optimal 5% Cu 2+ -doped TiNb 2 O 7 with surface coating of N-doped carbon exhibits significantly enhanced specific capacity and rate and cyclic performances in both half- and full-cell configurations, demonstrating an excellent electrochemical behavior for fast-charging LIB applications.

36 MATERIALS SCIENCE↗

Upgrading the Performance and Stability of Lithium, Manganese-Rich Layered Oxide Cathodes with Combined-Formic Acid and Spinel Coating Treatment

We report improving sluggish rate performance and cycling stability of Li, Mn-rich cathode materials (LMR) is of great importance for practical implementation. Here, dual surface modification on LMR particles with formic acid washing and spinel coating improves the electrochemical performance. Dilute formic acid can remove the Li2CO3 surface impurities and selectively reduce Ni while significantly increasing specific surface area by ~32 %, unlocking more electrochemically active surfaces. Spinel coating enhances cycle stability by suppressing detrimental side reactions at electrode-electrolyte interfaces at high voltage. Post-annealing temperature was found to significantly affect the cathode performance. Higher temperature favors diffusion of transition metal (TM)/Li ions of the spinel coating from surface to the bulk, removing the coating by possible reconstruction into the layered structure and thus degrading the performance. The spinel coating also appears to increase Co 3+ segregation on the particle surface. Compared to the original material, the optimized sample demonstrates 47 % higher capacity retention at 3C and retains 89 % of initial capacity after 150 cycles at 0.5C. Besides, the specific energy density of 523 Wh kg -1 can be attained after 150 cycles at 0.5C. Moreover, the post-cycling analysis of modified sample verifies a better structural integrity with less particle cracking. Altogether, this study portrays an alternative strategy to overcome the shortcomings of LMR cathode materials.

25 ENERGY STORAGE↗

Calcium Gradient-Doped LiNi 0.5 Mn 1.5 O 4 Cathode for Long Cycle Life Lithium-Ion Batteries

High-voltage spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) has attracted considerable attention as a cathode material for next-generation lithium-ion batteries due to its high operating voltage and intrinsically fast lithium-ion diffusion kinetics. However, the practical implementation of LNMO remains limited by its rapid capacity decay, primarily associated with bulk structural instability and parasitic interfacial reactions. To address these issues, we innovatively introduced calcium (Ca) as a dopant to enhance both the oxygen framework and surface stabilities of the LNMO crystal through gradient doping. Observations from the electronic microscopies, X-ray diffraction, and the elemental analysis confirmed that Ca is preferentially enriched at the particle surface, and a disordered crystal phase is preserved in the bulk in the gradient-doped LNMO cathodes. As cathodes in LIBs, the Ca gradient-doped (Ca gr) LNMO materials delivered formation capacities of ∼126−130 mAh/g and exhibited Coulombic efficiencies of 88−95%, which are consistently higher than those of the uniform-doped samples at the same doping level and undoped sample. Especially, the Ca gr 0.05 LNMO cathode demonstrated significantly improved rate capability with ∼113 mAh/g preserved at 10 C, while ∼92 mAh/g and ∼110 mAh/g for undoped and Ca uniform 0.05 LNMO, respectively, and excellent cycling stability, retaining ∼124.1 mAh/g (∼96.3% capacity retention) after 500 cycles. The analysis of cyclic voltammetry, differential capacity, and electrochemical impedance revealed that the excellent electrochemical performance is attributed to the structural and morphological advantages of gradient-doped LNMO cathodes with a disordered bulk structure for fast Li + diffusion and a Ca-enriched surface for minimizing the Mn dissolution.

25 ENERGY STORAGE↗

Our Sun IV: The Standard Model and Helioseismology: Consequences of Uncertainties in Input Physics and in Observed Solar Parameters

Helioseismic frequency observations provide an extremely accurate window into the solar interior; frequencies from the Michaelson Doppler Imager (MDI) on the Solar and Heliospheric Observatory (SOHO) spacecraft, enable the adiabatic sound speed and adiabatic index to be inferred with an accuracy of a few parts in 10(exp 4) and the density with an accuracy of a few parts in 10(exp 3). This has become a Serious challenge to theoretical models of the Sun. Therefore, we have undertaken a self-consistent, systematic study of the sources of uncertainties in the standard solar models. We found that the largest effect on the interior structure arises from the observational uncertainties in the photospheric abundances of the elements, which affect the sound speed profile at the level of 3 parts in 10(exp 3). The estimated 4% uncertainty in the OPAL opacities could lead to effects of 1 part in 10(exp 3); the approximately 5%, uncertainty in the basic pp nuclear reaction rate would have a similar effect, as would uncertainties of approximately 15% in the diffusion constants for the gravitational settling of helium. The approximately 50% uncertainties in diffusion constants for the heavier elements would have nearly as large an effect. Different observational methods for determining the solar radius yield results differing by as much as 7 parts in 10(exp 4); we found that this leads to uncertainties of a few parts in 10(exp 3) in the sound speed int the solar convective envelope, but has negligible effect on the interior. Our reference standard solar model yielded a convective envelope position of 0.7135 solar radius, in excellent agreement with the observed value of 0.713 +/- 0.001 solar radius and was significantly affected only by Z/X, the pp rate, and the uncertainties in helium diffusion constants. Our reference model also yielded envelope helium abundance of 0.2424, in good agreement with the approximate range of 0.24 to 0.25 inferred from helioseismic observations; only extreme Z/X values yielded envelope helium abundance outside this range. We found that other current uncertainties, namely, in the solar age and luminosity, in nuclear rates other than the pp reaction, in the low-temperature molecular opacities, and in the low-density equation of state, have no significant effect on the quantities that can be inferred from helioseismic observations. The predicted pre-main-sequence lithium depletion is uncertain by a factor of 2. The predicted neutrino capture rate is uncertain by approximately 30% for the Cl-27 experiment and by approximately 3% for Ga-71 experiments, while the B-8 neutrino flux is uncertain by approximately 30%.

Boothroyd, Arnold I.↗

Liquid-like solid-state diffusion of lithium ions in super-halide-rich argyrodite

The development of solid electrolytes with high ionic conductivity is essential for advancing safer, high-energy-density solid-state batteries, where lithium site distribution in the sublattice strongly affects ion transport. Here, we report a super-halide-rich argyrodite, Li 5.3 PS 4.3 Cl 1.7 , with remarkable room-temperature ionic conductivity (11.4 ± 0.7 mS cm -1 ) due to population of two additional interstitial lithium sites induced by vacancy redistribution. Prominent lithium density between lithium sites and elevated atomic displacement parameters indicate liquid-like diffusive behavior resembling sublattice melting. Combining electrochemical impedance spectroscopy, pulsed-field gradient NMR, and T 1 relaxation methods, we demonstrate that the augmented conductivity partly arises from a low energy barrier (0.08 eV) at the local scale, attributed to a three-site lithium distribution that drives correlated lithium dynamics. This work advances our understanding of the structure-dynamics interplay in super-halide-rich argyrodites, and highlighting their potential as solid-state battery electrolytes in cells with a coated single-crystal NMC82 cathode that achieve 170 mAh/g capacity at a 0.2 C rate .

25 ENERGY STORAGE↗

Development and pilot line production of lithium doped silicon solar cells

The work performed over the period of September 1971 to August 1972 to develop production processes for fabrication of lithium doped P/N cells is described. The BCl3 diffusion without 02 was selected as the optimum diffusion process for fabrication of lithium doped cells. An 8-2-7 (warm up - deposition - drive-in time in minutes) diffusion schedule at 1055 C was used for the first two lots (300 cells each) delivered to JPL. Cell efficiencies ranged from 11.0 to 13.7% based on an AMO of 135.3 mW/sq cm. These high efficiencies were obtained using from 10 to 40 cells per boron diffusion; increasing the quantity beyond 40 resulted in lower outputs. At this point, the emphasis was placed on investigation of a BCl3 with 02 diffusion. Through evaluation of the effects of diffusion time and temperature, gas flow rates, and desposition plus drive-in vs. continuous deposition and no drive-in cycles, diffusion parameters were determined which produced short circuit currents of 136 + or - 4 mA for ten cells spaced along 12 in. of the diffusion boat. The quantity was increased to 60, 100, and 150 cell diffusions with no more variation in cell short circuit current than observed with 10 cells.

Payne, P. A.↗

Bioinspired mechanically interlocking holey graphene@SiO 2 anode

Mechanically interlocking structures that can enhance adhesion at the interface and regulate the stress distribution have been widely observed in biological systems. Inspired by the biological structures in the wings of beetles, we synthesized a holey graphene@SiO 2 anode with strong mechanical interlocking, characterized it electrochemically, and explained its performance by finite element analysis and density functional calculations. The mechanically interlocking structure enhances lithium-ion (Li + ) storage by transmitting the strain from SiO 2 to the holey graphene and by a mechano-electrochemical coupling effect. The interlocking fit hinders the abscission of SiO 2 and the distinctive structure reduces the stress and strain of SiO 2 during (de)lithiation. The positive mechano-electrochemical coupling effect preserves the amount of electrochemically active phase (Li x Si) during cycles and facilitates Li + diffusion. Therefore, the capacity shows only a slight attenuation after 8000 cycles (cycling stability), and the specific capacity is ~1200 mA h g –1 at 5 A/g (rate-performance). This study furnishes a novel way to design high-performance Li + /Na + /K + /Al 3+ anodes with large volume expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear phase field model for electrodeposition in electrochemical systems

A nonlinear phase-field model has been developed for describing the electrodeposition process in electrochemical systems that are highly out of equilibrium. Main thermodynamic driving forces for the electrode-electrolyte interface (EEI) evolution are limited to local variations of overpotential and ion concentration. Application of the model to Li-ion batteries describes the electrode interface motion and morphology change caused by charge mass transfer in the electrolyte, an electrochemical reaction at the EEI and cation deposition on the electrode surface during the charging operation. The Li electrodeposition rate follows the classical Butler-Volmer kinetics with exponentially and linearly depending on local overpotential and cation concentration at the electrode surface, respectively. Simulation results show that the Li deposit forms a fiber-like shape and grows parallel to the electric field direction. The longer and thicker deposits are observed both for higher current density and larger rate constant where the surface reaction rate is expected to be high. The proposed diffuse interface model well captures the metal electrodeposition phenomena in plenty of non-equilibrium electrochemical systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase evolution of conversion-type electrode for lithium ion batteries

Batteries with conversion-type electrodes exhibit higher energy storage density but suffer much severer capacity fading than those with the intercalation-type electrodes. The capacity fading has been considered as the result of contact failure between the active material and the current collector, or the breakdown of solid electrolyte interphase layer. Here, using a combination of synchrotron X-ray absorption spectroscopy and in situ transmission electron microscopy, we investigate the capacity fading issue of conversion-type materials by studying phase evolution of iron oxide composited structure during later-stage cycles, which is found completely different from its initial lithiation. The accumulative internal passivation phase and the surface layer over cycling enforce a rate-limiting diffusion barrier for the electron transport, which is responsible for the capacity degradation and poor rate capability. This work directly links the performance with the microscopic phase evolution in cycled electrode materials and provides insights into designing conversion-type electrode materials for applications.

25 ENERGY STORAGE↗

GYROSCOPIC PUMPING OF LARGE-SCALE FLOWS IN STELLAR INTERIORS AND APPLICATION TO LITHIUM-DIP STARS

The maintenance of large-scale differential rotation in stellar convective regions by rotationally influenced convective stresses also drives large-scale meridional flows by angular-momentum conservation. This process is an example of 'gyroscopic pumping' and has recently been studied in detail in the solar context. An important question concerns the extent to which these gyroscopically pumped meridional flows penetrate into nearby stably stratified (radiative) regions, since they could potentially be an important source of non-local mixing. Here, we present an extensive study of the gyroscopic pumping mechanism, using a combination of analytical calculations and numerical simulations both in Cartesian geometry and in spherical geometry. The various methods, when compared with one another, provide physical insight into the process itself, as well as increasingly sophisticated means of estimating the gyroscopic pumping rate. As an example of application, we investigate the effects of this large-scale mixing process on the surface abundances of the light elements Li and Be for stars in the mass range 1.3-1.5 M {sub sun} (the so-called Li-dip stars). We find that gyroscopic pumping is a very efficient mechanism for circulating material between the surface and the deep interior, so much in fact that it overestimates Li and Be depletion by orders of magnitude for stars on the hot side of the dip. However, when the diffusion of chemical species back into the surface convection zone is taken into account, a good fit with observed surface abundances of Li and Be as a function of stellar mass in the Hyades cluster can be found for reasonable choices of model parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Self-Healing, Flowable, Yet Solid Electrolyte Suppresses Li-Metal Morphological Instabilities

In this article, lithium metal (Li 0 ) solid-state batteries encounter implementation challenges due to dendrite formation, side reactions, and movement of the electrode–electrolyte interface in cycling. Notably, voids and cracks formed during battery fabrication/operation are hot spots for failure. Here, a self-healing, flowable yet solid electrolyte composed of mobile ceramic crystals embedded in a reconfigurable polymer network is reported. This electrolyte can auto-repair voids and cracks through a two-step self-healing process that occurs at a fast rate of 5.6 µm h -1 . A dynamical phase diagram is generated, showing the material can switch between liquid and solid forms in response to external strain rates. The flowability of the electrolyte allows it to accommodate the electrode volume change during Li 0 stripping. Simultaneously, the electrolyte maintains a solid form with high tensile strength (0.28 MPa), facilitating the regulation of mossy Li 0 deposition. The chemistries and kinetics are studied by operando synchrotron X-ray and in situ transmission electron microscopy (TEM). Solid-state NMR reveals a dual-phase ion conduction pathway and rapid Li + diffusion through the stable polymer-ceramic interphase. This designed electrolyte exhibits extended cycling life in Li 0 –Li 0 cells, reaching 12 000 h at 0.2 mA cm -2 and 5000 h at 0.5 mA cm -2 . Furthermore, owing to its high critical current density of 9 mA cm -2 , the Li 0 –LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cell demonstrates stable cycling at 5 mA cm -2 for 1100 cycles, retaining 88% of its capacity, even under near-zero stack pressure conditions.

25 ENERGY STORAGE↗

NASA Tech Briefs, July 2007

Topics covered include: Miniature Intelligent Sensor Module; "Smart" Sensor Module; Portable Apparatus for Electrochemical Sensing of Ethylene; Increasing Linear Dynamic Range of a CMOS Image Sensor; Flight Qualified Micro Sun Sensor; Norbornene-Based Polymer Electrolytes for Lithium Cells; Making Single-Source Precursors of Ternary Semiconductors; Water-Free Proton-Conducting Membranes for Fuel Cells; Mo/Ti Diffusion Bonding for Making Thermoelectric Devices; Photodetectors on Coronagraph Mask for Pointing Control; High-Energy-Density, Low-Temperature Li/CFx Primary Cells; G4-FETs as Universal and Programmable Logic Gates; Fabrication of Buried Nanochannels From Nanowire Patterns; Diamond Smoothing Tools; Infrared Imaging System for Studying Brain Function; Rarefying Spectra of Whispering-Gallery-Mode Resonators; Large-Area Permanent-Magnet ECR Plasma Source; Slot-Antenna/Permanent-Magnet Device for Generating Plasma; Fiber-Optic Strain Gauge With High Resolution And Update Rate; Broadband Achromatic Telecentric Lens; Temperature-Corrected Model of Turbulence in Hot Jet Flows; Enhanced Elliptic Grid Generation; Automated Knowledge Discovery From Simulators; Electro-Optical Modulator Bias Control Using Bipolar Pulses; Generative Representations for Automated Design of Robots; Mars-Approach Navigation Using In Situ Orbiters; Efficient Optimization of Low-Thrust Spacecraft Trajectories; Cylindrical Asymmetrical Capacitors for Use in Outer Space; Protecting Against Faults in JPL Spacecraft; Algorithm Optimally Allocates Actuation of a Spacecraft; and Radar Interferometer for Topographic Mapping of Glaciers and Ice Sheets.

Source record↗

Localization of vacancies and mobility of lithium ions in Li{sub 2}ZrO{sub 3} as obtained by {sup 6,7}Li NMR

The {sup 6,7}Li NMR spectra and the {sup 7}Li spin–lattice relaxation rate were measured on polycrystalline samples of Li{sub 2}ZrO{sub 3}, synthesized at 1050 K and 1300 K. The {sup 7}Li NMR lines were attributed to corresponding structural positions of lithium Li1 and Li2 by comparing the EFG components with those obtained in the first-principles calculations of the charge density in Li{sub 2}ZrO{sub 3}. For both samples the line width of the central {sup 7}Li transition and the spin–lattice relaxation time decrease abruptly at the temperature increasing above ∼500 K, whereas the EFG parameters are averaged (〈ν{sub Q}〉=42 (5) kHz) owing to thermally activated diffusion of lithium ions. - Graphical abstract: Path of lithium ion hopping in lithium zirconate Li{sub 2}ZrO{sub 3}. - Highlights: • Polycrystalline samples Li{sub 2}ZrO{sub 3} with monoclinic crystal structure synthesized at different temperatures were investigated by {sup 6,7}Li NMR spectroscopy. • Two {sup 6,7}Li NMR lines were attributed to the specific structural positions Li1 and Li2. • The distribution of vacancies was clarified for both lithium sites. • The activation energy and pathways of lithium diffusion in Li{sub 2}ZrO{sub 3} were defined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗