SEARCH · Search NASA

Results for “mass production method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Unitary coupled-channel three-body amplitude with pions and kaons

Three-body dynamics above threshold is required for the reliable extraction of many amplitudes and resonances from experiment and lattice QCD. The S-matrix principle of unitarity can be used to construct dynamical coupled-channel approaches in which three particles scatter off each other, rearranging two-body subsystems by particle exchange. This paper reports the development of a three-body coupled-channel, amplitude including pions and kaons. The unequal-mass amplitude contains two-body S- and P-wave subsystems (“isobars”) of all isospins, 𝐼 = 0,1/2,1,3/2,2 , and it also allows for transitions within a given isobar. The 𝑓 0 ⁡(500)⁢(𝜎),𝑓 0 ⁡(980),𝜌⁡(700),𝐾$^{*}_{0}$⁡(700)⁢(𝜅), and 𝐾*⁡(892) resonances are included, apart from repulsive isobars. Different methods to evaluate the amplitude for physical momenta are discussed. Production amplitudes for 𝑎 1 quantum numbers are shown as a proof of principle for the numerical implementation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Oxidation of 3D-printed SiC in air and steam environments

Here, the high-temperature oxidation of additively manufactured and chemically vapor infiltrated (3D-printed SiC) has been compared to chemical vapor deposited (CVD) SiC. 100-h isothermal exposures were conducted at 1425° and 1300°C at 1 atm under both dry air and steam environments. A SiC reaction tube was utilized to reduce silica volatility. After steam oxidation at 1425° and 1300°C, on the 3D-printed SiC surface, which was intrinsically rougher than the CVD surface, scales were 70%–90% thicker at the convex regions compared to concave/flat regions. In the convex regions, large cracks perpendicular to the oxidizing interface were observed. After dry air oxidation, scale thicknesses were comparable between 3D-printed SiC and CVD SiC, regardless of geometry. Finite element modeling, conducted to elucidate the relationship between SiC geometry and ß- to α-cristobalite transformation stress, determined cristobalite transformation tensile stresses to be on the order of 103 MPa during cool down, assuming a 6 vol% reduction. Compared to flat SiC substrates, tensile transformation stresses were elevated at concave regions and relaxed at convex regions. Combined with specimen mass gain (accounting for the rougher surface) of 3D-printed SiC being 15%–32% higher for 3D-printed SiC after 1300°C and 1425°C steam oxidation, the work presented concludes that the increased oxidation of 3D-printed SiC is primarily caused by tensile hoop stresses driven by oxidation volume expansion. Lastly, the efficacy of the 3D-printing method is demonstrated through the production of tristructural isotropic imbedded 3D-printed SiC fuel forms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Molecular Hypernetworks for Exploration of Multi-Dimensional Metabolomics Data (Chyper)

Orthogonal separations of data from high-resolution mass spectrometry can provide insight into sample composition and help address the challenge of complete annotation of molecules in untargeted metabolomics. “Molecular networks” (MNs), as used, for example, in the Global Natural Products Social Molecular Networking platform, are an increasingly popular computational strategy for exploring and visualizing molecular relationships and improving annotation. MNs use graph representations to show the relationships between measured multidimensional data features. MNs also show promise for using network science algorithms to automatically identify targets for annotation candidates and to dereplicate features associated to a single molecular identity. However, more advanced methods may better represent the complexity present in samples. Our work aims to increase confidence in annotation propagation by extending molecular network methods to include “molecular hypernetworks” (MHNs), able to natively represent multiway relationships among observations supporting both human and analytical processing. In this paper we first introduce MHNs illustrated with simple examples, and demonstrate how to build them from liquid chromatography- and ion mobility spectrometry- separated MS data. We then describe a method to construct MHNs directly from existing MNs as their “clique reconstructions”, demonstrating their utility by comparing examples of previously published graph-based MNs to their respective MHNs.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Numerical Investigation of Susceptor-Catalyst Design for Ethylene Generation in Radio Frequency Based Reactors

Ethylene is the most widely produced petrochemical component in the world. Whether reactors are heated directly or indirectly via steam, manufacturers use economies of scale to overcome inherent thermodynamic inefficiencies when burning fossil fuels. While allowing large-scale operations to use alternative sources of energy and raw materials, new methods of supplying energy to chemical reactor systems can reduce the energy waste produced by conventional processes. One viable method for effectively supplying energy to reactor systems is electromagnetic (EM) induction heating. Using the properties of radio frequency (RF) waves, heterogeneous catalysts can be precisely targeted for heating inside reactors. Site-selective heating can greatly lower the energy requirements of the process by supplying heat to reaction sites while reducing needless heat transfer elsewhere. In this study, a microscale model was used to help create guidelines for susceptors and catalysts to improve ethylene production. The oxidative dehydrogenation of ethane is investigated by utilizing several catalysts and potential catalyst/susceptor combinations, with heat provided by an EM susceptor. Having the susceptors and catalyst function separately results in higher gradients in both heat and mass transfer, which drives transport through the catalyst region, while still providing adequate heating for endothermic reactions. However, using a susceptive core with a catalyst covering produces the maximum ethylene concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Differential cross-section measurements of Higgs boson production in the H → τ + τ - decay channel in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Differential measurements of Higgs boson production in the τ-lepton-pair decay channel are presented in the gluon fusion, vector-boson fusion (VBF), VH and $t\overline{t}H$ associated production modes, with particular focus on the VBF production mode. The data used to perform the measurements correspond to 140 fb -1 of proton-proton collisions collected by the ATLAS experiment at the LHC. Two methods are used to perform the measurements: the Simplified Template Cross-Section (STXS) approach and an Unfolded Fiducial Differential measurement considering only the VBF phase space. For the STXS measurement, events are categorized by their production mode and kinematic properties such as the Higgs boson’s transverse momentum (${p}_{\textrm{T}}^{\textrm{H}}$ ), the number of jets produced in association with the Higgs boson, or the invariant mass of the two leading jets (mjj). For the VBF production mode, the ratio of the measured cross-section to the Standard Model prediction for m jj > 1.5 TeV and ${p}_{\textrm{T}}^{\textrm{H}}$ > 200 GeV (${p}_{\textrm{T}}^{\textrm{H}}$ < 200 GeV) is ${1.29}_{-0.34}^{+0.39}$ (${0.12}_{-0.33}^{+0.34}$ ). This is the first VBF measurement for the higher-${p}_{\textrm{T}}^{\textrm{H}}$ criteria, and the most precise for the lower-${p}_{\textrm{T}}^{\textrm{H}}$ criteria. The fiducial cross-section measurements, which only consider the kinematic properties of the event, are performed as functions of variables characterizing the VBF topology, such as the signed ΔΦ jj between the two leading jets. The measurements have a precision of 30%–50% and agree well with the Standard Model predictions. These results are interpreted in the SMEFT framework, and place the strongest constraints to date on the CP-odd Wilson coefficient ${c}_{H\overset{\sim }{W}}$ .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2025

Bacterial Biomining Rare Earth Elements in Abandoned Coal Mine Drainage: Solubilization and Sequestration

Bacteria can be used to biomine rare earth elements (REEs) domestically from abandoned coal-mine drainage (AMD) solids. Pennsylvania has ~11,000 abandoned mines, with ~500 AMD passive remediation systems that precipitate AMD REE rich solids onsite. In passive systems, REEs, co-precipitate with manganese (Mn), accumulating as solids that can produce a valuable leachate when resolubilized. REEs like lanthanum (La) are used in battery technology. Microbial metabolic changes that co-resolubilize Mn and REEs could result in an affordable release process that does not require chemical additives and the select sequestering of REEs like La allow for the selective purification from a mixed REE composition. Currently, the microbial mechanisms that contribute to mass REE resolubilization and selective sequestration are poorly understood. We have isolated bacteria (Bacillus mycoides JR07 and Bacillus pseudomycoides KB7) that solubilize Mn oxide, La oxide, and AMD solids by acidogenesis. We have determined that isolates JR07 and KB7 solubilize the La from AMD PRS solids by their production of organic acids. Preliminary results show methylotrophic bacterial isolate B3 can take up soluble La(III), giving an avenue to purification of La from a rich REE leachate. Determining the microbial metabolism and genes involved in the mass resolubilization of REEs and selective biomining of La(III) is crucial to optimize the biomining of AMD solids. Our work addresses the growing need to develop novel REE recovery methods from domestic sources.

microbiology↗

DOE OSTI2021

Cumulative short-lived photofission product yields for nuclear forensic application

Experiments have long been carried out with linear accelerator (linac) produced bremsstrahlung X-rays to study high-energy photon-induced fission, known as “photofission”. One benefit of photofission, when compared with neutron-induced fission, is the ability to investigate fundamental physics of fission at excitation energies lower than what is possible with neutrons [1]. Absorption of an incident neutron results in a compound nucleus with an excitation energy at least equal to the neutron binding energy; thus, the lowest energy region of the fission barrier cannot be studied. Fission product yield distributions are dependent on the incident particle energy and the target nucleus mass. They are generally represented by a double-humped curve, with low and high mass “peaks” and an intermediate mass “valley”. As incident particle energy increases, the excitation energy of the nucleus increases, thereby increasing the overall yield of isotopes in the valley with respect to the two maxima or peaks of the fission product curve [3]. Photofission is most probable for incident photons around 14 MeV due to the giant dipole resonance. Induced photofission around this energy results in a fission product yield distribution that resembles 14 MeV DT neutron fission more than thermal or fast (500 keV) neutron fission. In post-detonation nuclear forensics, the peak-to-valley ratio of the fission product yield curve could be used for characterizing device type by providing an indication of the neutron energy spectrum that had induced fission (e.g., 500 keV vs. 14 MeV). The goal of this work is to improve nuclear data for isotopes of interest in nuclear forensics and special nuclear material (SNM) detection, specifically the fission product yield data via photofission experiments for the isotopes of 238U and 232Th. Photofission has been proposed as a less costly and more flexible production method for the valley isotopes that are representative of DT neutron fission product yield distributions, which would benefit nuclear forensics exercises in testing for analysis techniques. Natural uranium and thorium targets were irradiated with bremsstrahlung photons (nominal endpoint energies of 8, 14, and 20 MeV), generated via impingement of high-energy electrons on a tungsten electron-to-photon radiator. Gamma-ray spectroscopy was used to observe and identify the decay of the resulting fission products. The photofission yields of 102 fission products were measured for the set of the 238U and 232Th targets at the three bremsstrahlung X-ray endpoint energies 8, 14, and 20 MeV. These fragments included masses ranging from A=84 to A=144, with half-lives as short as 1.07 seconds.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2022

Investigation of Remanufacturing Methods Utilizing Mechanically-Generated and Gas-Atomized Feedstock Production for Directed Energy Deposition Processing Through Specific Energy Consumption Modeling

The goal of this work was to assess the energy consumption of a novel remanufacturing method that utilizes mechanically-generated feedstock for directed energy deposition. Gas-atomization is the state-of-the-art production process for directed energy deposition feedstock, and for this work was incorporated into a remanufacturing process path to provide a comparison method. Specific energy consumption models of remanufacturing utilizing both of these proposed process paths were developed and applied to a case study to investigate energy saving opportunities for future manufacturing paradigms. The energy modelling was done in three stages. First, the mechanically-generated feedstock production energy consumption model was generated from experimental observation. Second, the gas-atomized feedstock production energy consumption model was generated from a combination of experimental observation, reported estimates from the manufacturer, and data found in the literature. Lastly, the energy consumption model of directed energy deposition was derived from experimental observation and compares favorably with reported estimates in the literature. With the models, the specific energy consumption in the two process paths were compared and their application was demonstrated by estimating the energy consumption to remanufacture a bracket. The two feedstock production methods had similar specific energy consumptions. The specific energy consumption of the directed energy deposition process was the greatest component in the respective remanufacturing paths by an order of magnitude; increasing deposition rate is the most important factor for lowering the overall specific energy consumption. The analyzed remanufacturing technologies were estimated to consume less energy than replacement when repairing up to approximately 15% of the original part’s mass.

42 ENGINEERING↗

DOE OSTI2025

Atom-at-a-Time Radioactive Molecule Identification: Looking toward Studies of Superheavy Elements

The chemical behavior of superheavy elements (SHEs, Z > 103) remains poorly understood. Their chemical properties are expected to deviate from established trends, challenging the predictive power of the periodic table. To investigate these elements experimentally, they must first be synthesized through nuclear reactions and then quickly subjected to chemical studies before they decay. Given the low production rates of these reactions and the need for measurements on an atom-at-a-time basis, innovative techniques are needed. Here, to address these challenges, a novel gas-phase chemistry method has been developed at Lawrence Berkeley National Laboratory, utilizing the Berkeley Gas-filled Separator and FIONA. This technique enables the production, identification, and study of molecular species formed by SHEs. As a proof of concept, we present measurements on the formation and identification of 151,152 HoO + molecules, demonstrating the capability to study the production of radioactive molecules under controlled conditions and directly identify them via their mass-to-charge ratio. These measurements validate the effectiveness of this technique for low-statistics SHE studies, highlighting the potential of this approach to ignite the next generation of experimental SHE chemistry research, offering a path to re-evaluate SHE placement on the periodic table.

Chemistry↗

DOE OSTI2025

Searches for New Physics With Muon Conversion at Fermilab and Triboson Production at the LHC

We report on several efforts to search for physics beyond the standard model of particle physics at broad energy scales. The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the muon to electron conversion process, which is suppressed in the Standard Model. Mu2e will be operated at a low energy, yet can probe New Physics at very high mass scales (O(1e3 - 1e4 ) TeV). At high energies, the CMS experiment at the CERN LHC continues to deliver an impressive suite of Standard Model measurements and limits on a variety of New Physics signatures. Mu2e is under construction and slated to collect its first physics data in the coming years. This thesis describes work done during the construction phase of Mu2e and focuses on two critical areas: magnetic field modeling and statistical analysis. We describe a novel method for field modeling which we validate using a simulated dataset representing the expected magnetic field in the Detector Solenoid. This method blends a standard least-squares fitting technique that utilizes physically motivated analytical model functions with a novel physics informed network that is constructed to obey Maxwell’s equations. We show the technique can model the field with an accuracy of 10−7 despite the presence of injected noise in the pseudo-measurements at the 10−5 level. We then present preliminary results of the calibration of 3D Hall probes at the sub-10−4 level. These probes will be used to directly measure the Mu2e Detector Solenoid magnetic field on a sparse grid; these measurements serve as the input to the field model fitting. Finally, we describe the first implementation of both an unbinned shape analysis and a Bayesian interpretation applied to Mu2e pseudo-data. Up to 20% tighter limits can be set by the shape analysis compared to a standard cut & count analysis. The AlCap experiment collected data at PSI in 2015 to measure several important quantities related to nuclear muon capture on an aluminum target, which is a significant background process for Mu2e. The neutron emission from muon capture can introduce background hits in the Mu2e detectors and can increase radiation damage in various elements of the apparatus. We present measurements of the neutron group fluence and mean neutron multiplicity for muon capture on aluminum nuclei. Finally, we discuss an analysis of triboson production at CMS using an Effective Field Theory framework. Standard Model triboson production, which was first observed at CMS in 2020, has a relatively small cross section and provides direct access to both anomalous triple gauge couplings and quartic gauge couplings. These couplings, interpreted in the Standard Model Effective Field Theory, are studied in the present work. We target the boosted regime where the background rate is low and yields are enhanced when dimension-6 and dimension-8 Wilson coefficients are non-zero. We do not observe an excess in the data and therefore set bounds on the Wilson coefficients. For dimension-6 coefficients the tightest observed (expected) bounds are set on cW /Λ2 where Λ is the mass scale of new physics; the bounds are [−0.13, 0.12] TeV−2 ([−0.12, 0.12] TeV−2 ) at 95% CL. The tightest bounds in dimension-8 are set on fT,0 / Λ4 ; the observed (expected) bounds at 95% CL are [−0.63, 0.69] TeV−4 ([−0.54, 0.62] TeV−4 ). Additional results are presented which include scenarios where multiple Wilson coefficients are non-zero, the application of signal model clipping to address unitarity violation in Effective Field Theories, and a novel template fit developed for easier reinterpretation of our results.

Kampa, Cole Erik [Northwestern U. (main)] (ORCID:0↗

DOE OSTI2022

Review—Development of Highly Active and Stable Catalyst Supports and Platinum–Free Catalysts for PEM Fuel Cell

Metal-free, metal-containing, and template-assisted metal-containing nitrogen-modified carbon-based catalysts carbon composite supports, and highly active and electrochemically stable hybrid cathode catalysts for oxygen reduction reaction are reviewed in this manuscript. Here, novel procedures are developed for the synthesis of (i) highly catalytically active PGM-free catalyst and stable carbon composite catalyst supports. The carbon composite catalyst supports are engineered with optimized BET surface area and pore size distribution and with a well-defined kinetic and mass transfer region during the reaction and their performance is dicussed in detail in this review. The surface activation results in increasing carbon graphitization and inclusion of non-metallic active sites on the support surface. The USC catalysts exhibit the initial performance of 0.91 V and a maximum power density of 177 mW cm –2 , with well-defined kinetic and mass-transfer regions and ~2.5% H 2 O 2 production. Activated carbon composite support (ACCS) is modified to optimize its kinetic activity and its electrochemical stability shows excellent thermal stability and support stability under simulated start-up/shut-down operating conditions. The stabilities of various supports developed in this study are compared with those of a commercial Pt/C catalyst. The active sites for the ORR identified with electrochemical and physicochemical methods are pyridinic-N and quaternary-N.

25 ENERGY STORAGE↗

DOE OSTI2021

H 2 production in the 10 B(n,α) 7 Li reaction in water

Herein we demonstrate a method for measuring the H2 produced in water from the 10 B(n,α) 7 Li fission reaction. Low energy neutrons from the NIST Center for Neutron Research interact with borate-containing water in a temperature-controlled high pressure cell made from titanium. After exposure for one to several hours, the water is extracted and sparged with argon. H 2 entrained in the sparging gas is sampled with a small mass spectrometer. To determine the neutron exposure, a small amount of sodium is included in the borate solution. The water is collected and 24 Na activation is measured in a counting apparatus on the following day. The G-value for H 2 at room temperature is found to be (1.18 ± 0.10) molecules H 2 /100eV, in good agreement with previous estimates and recent modeling calculations.

10B↗

DOE OSTI2025

Dynamics of magnetic evaporative beamline cooling for the preparation of cold atomic beams

The most sensitive direct neutrino mass searches today are based on measurement of the end point of the 𝛽 spectrum of tritium to infer limits on the mass of the unobserved neutrino. To avoid the smearing associated with the distribution of molecular final states in the T-He molecule, the next generation of these experiments will need to employ atomic (T) rather than molecular (T 2 ) tritium sources, at currents of at least 10 15 atoms per second. Following production, atomic T can be trapped in gravitational and/or magnetic bottles for 𝛽 spectrum experiments, if and only if it can first be cooled to millikelvin temperatures. Accomplishing this cooling presents substantial technological challenges. The Project 8 collaboration is developing a technique based on magnetic evaporative cooling along a beamline (MECB) for the purpose of cooling T to feed a magnetogravitational trap that also serves as a cyclotron radiation emission spectroscope. Initial tests of the approach are planned in a pathfinder apparatus using atomic Li. Here, this paper presents a method for analyzing the dynamics of the MECB technique and applies these calculations to the design of systems for cooling and slowing of atomic Li and T. A scheme is outlined that could provide a current of T at the millikelvin temperatures required for the Project 8 neutrino mass search.

atom optics↗

DOE OSTI2023

Dark photon superradiance: Electrodynamics and multimessenger signals

We study the electrodynamics of a kinetically mixed dark photon cloud that forms through superradiance around a spinning black hole, and design strategies to search for the resulting multimessenger signals. A dark photon superradiance cloud sources a rotating dark electromagnetic field which, through kinetic mixing, induces a rotating visible electromagnetic field. Standard model charged particles entering this field initiate a transient phase of particle production that populates a plasma inside the cloud and leads to a system which shares qualitative features with a pulsar magnetosphere. We study the electrodynamics of the dark photon cloud with resistive magnetohydrodynamics methods applicable to highly magnetized plasma, adapting techniques from simulations of pulsar magnetospheres. We identify turbulent magnetic field reconnection as the main source of dissipation and electromagnetic emission, and compute the peak luminosity from clouds around solar-mass black holes to be as large as 10 43 erg/s for observationally allowed dark photon parameter space. The emission is expected to have a significant x-ray component and to potentially be periodic, with period set by the dark photon mass. The luminosity is comparable to the brightest x-ray sources in the Universe, allowing for searches at distances of up to hundreds of Mpc with existing telescopes. Finally, we discuss observational strategies, including targeted electromagnetic follow-ups of solar-mass black hole mergers and targeted continuous gravitational wave searches of anomalous pulsars.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Total Measurement Uncertainty in Neutron Coincidence Multiplicity Analysis

Neutron multiplicity counting is the most commonly used nondestructive assay technique for determining the plutonium mass within containers of scrap PuO 2 or mixed oxide (MOX). In multiplicity analysis, the 240 Pu eff mass, leakage multiplication, and alpha ratio (the ratio of [α, n]-to-spontaneous fission neutron production) are the three primary unknown sample properties. They must be determined simultaneously. To solve for these three unknowns in a multiplicity assay, three measured values are needed: the singles, doubles, and triples neutron count rates. While the analysis is limited to solving for three unknowns, there are many additional factors that impact the observed count rates and contribute to the measurement uncertainty. In this study we investigate the various uncertainty contributors for the multiplicity analysis through a combination of traditional uncertainty propagation techniques supplemented by Monte Carlo simulations to address the dependences not explicitly expressed by the point source model. Uncertainties arising from counting statistics, calibration parameters, calibration method, nuclear data, and various material characteristics (isotopic abundances, chemical form, density, and impurities) are considered. A Total Measurement Uncertainty (TMU) estimate is then developed from these uncertainty contributors. This study is confined to multiplicity analysis of items commonly encountered in international safeguards applications. That is, the study focused on Pu oxides and MOX materials for the masses ranging up to 4000 grams total Pu. Multiplicity measurements were simulated using MCNP V6 based on the Plutonium Scrap Multiplicity Counter (PSMC), Epithermal Multiplicity Counter (ENMC), Pyrochemical Multiplicity Counter, and Large Epithermal Multiplicity Counter (LEMC) for this study; however, this report focuses on the parameterization of the uncertainties for the PSMC. The performance differences between the PSMC and the other multiplicity counting systems are relatively small, primarily manifesting in the impact on measurement precision so that the evaluation developed for the PSMC can be applied to the other multiplicity counting systems. Finally an analysis tool, the Multiplicity TMU Estimator, was developed from this study to serve as an aid for evaluation of the total measurement uncertainty of multiplicity assay results obtained from the commonly used INCC acquisition and analysis software.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Whole‐Cell MALDI‐ToF MS Coupled with Untargeted Metabolomics Facilitates Investigations of Microbial Chemical Interactions

Abstract The emergence of drug‐resistant pathogens necessitates the development of new countermeasures. In this regard, the introduction of probiotics to directly attack or competitively exclude pathogens presents a useful strategy. Application of this approach requires an understanding of how a probiotic and its target pathogen interact. A key means of probiotic‐pathogen interaction involves the production of small molecules called natural products (NPs). Here, we report the use of whole‐cell matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐ToF) mass spectrometry to characterize NP production by candidate probiotics (mouse airway microbiome isolates) when co‐cultured with the respiratory pathogen Burkholderia . We found that a Bacillus velezensis strain inhibits growth of and elicits NP production by Burkholderia thailandensis . Dereplication of known NPs detected in the metabolome of this B. velezensis strain suggests that a previously unannotated bioactive compound is involved. Thus, we present the use of whole‐cell MALDI as a broadly applicable method for screening the NP composition of microbial co‐cultures; this can be combined with other ‐omics methods to characterize probiotic‐pathogen and other microbe‐microbe interactions.

Aiosa, Nicole↗

DOE OSTI2023

Protein Extraction, Precipitation, and Recovery from Chlorella sorokiniana Using Mechanochemical Methods

Protein extraction, precipitation, and recovery methods were evaluated by this study using a green alga—Chlorella sorokiniana. A mechanochemical cell disruption process was applied to facilitate protein extraction from microalgal biomass. Optimization of the mechanochemical process resulted in milling conditions that achieved a protein extraction of 52.7 ± 6.45%. The consequent acid precipitation method was optimized to recover 98.7% of proteins from the microalgal slurry. The measured protein content of the protein isolate was 41.4% w/w. These results indicate that the precipitation method is successful at recovering the extracted proteins in the algal slurry; however, the removal of non-protein solids during centrifugation and pH adjustment is not complete. The energy balance analysis elucidated that the energy demand of the protein extraction and recovery operation, at 0.83 MJ/kg dry algal biomass, is much lower than previous studies using high-pressure homogenization and membrane filtration. This study concludes that mechanochemical protein extraction and recovery is an effective, low-energy processing method, which could be used by algal biorefineries to prepare algal proteins for value-added chemical production as well as to make algal carbohydrates and lipids in the residual biomass more accessible for biofuel production.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Computational Methodology to Simulate Pyrometallurgical Processes in a Secondary Lead Furnace

Pyrometallurgical recovery of nonferrous metals involves a combination of thermally intensive transformations during exothermic gas-phase reactions, endothermic decomposition of solid charge, and melting of simpler solids. In the recovery of secondary lead, simultaneous thermal effects in a reverberatory-style furnace cause a melt pool to accumulate at the bottom, with lighter solids (slag) floating above and gaseous products from decomposition of the charge diffusing through the gas–slag interface. Species from oxy-fuel combustion of natural gas, species profiles from smelting reactions, and the formation of a melt pool consisting primarily of lead are simulated via a time-averaged formulation. Predictions of outflow are compared with preset inflow profiles to ensure conservation of mass. Thermal profiles for solid, liquid, and gas phases are presented by species. A novel method is implemented to model the latent heat of fusion using a heterogeneous chemical reaction. The simulation is conducted in Simcenter STAR-CCM+ v. 16.02.009-R8.

Rao, Vivek↗