Search NASA⌕ Search

SEARCH · Search NASA

Results for “modeling discrepancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Progressive Failure Analysis Correlation with Notched Composite Laminate Test Data

Testing of small and intermediate laminate panels with notches was performed and Progressive Failure Analyses (PFA) models were developed for aid in test planning and for correlation with the test data. Two progressive damage failure models were included in the study: the commercially available Abaqus built-in damage model and COmplete STress Reduction (COSTR) damage model developed at NASA Langley Research Center (LaRC). The finite elements models used for the analysis were developed using shell elements. The pre-test PFA results obtained from the two damage models were compared to test data. Then a post-test PFA with updated material properties based on additional available material property data was executed with the COSTR damage model and compared to the test data. The panels tested in compression all exhibited less scatter in the failure load with self-similar failure behavior. The panels tested in tension exhibited more scatter in the failure load with a failure mode that included delamination of plies. However, a self-similar crack path was also observed as the overall failure mode for all panels tested. When comparing test data to the pre-test analysis results, both damage models with shell element models were considered adequate for predicting the behavior and failure load of both the small and intermediate panels when tested in compression. However, for the tension load cases, larger differences were observed between the test and analysis results. When comparing test data to the post-test analysis performed using the COSTR damage model, better correlation was observed. However, large discrepancies were still observed for the tension load cases. Consequently, a higher fidelity finite element model including solid elements for sub-laminates and the modeling of cohesive layers between sub-laminate layers is recommended for tension loading of notched composite laminates.

Damage Model,Progressive Failure Analysis,Open Hol↗
NASA NTRS1996

Hydroacoustic forcing function modeling using DNS database

A wall pressure frequency spectrum model (Blake 1971 ) has been evaluated using databases from Direct Numerical Simulations (DNS) of a turbulent boundary layer (Na & Moin 1996). Good agreement is found for moderate to strong adverse pressure gradient flows in the absence of separation. In the separated flow region, the model underpredicts the directly calculated spectra by an order of magnitude. The discrepancy is attributed to the violation of the model assumptions in that part of the flow domain. DNS computed coherence length scales and the normalized wall pressure cross-spectra are compared with experimental data. The DNS results are consistent with experimental observations.

Zawadzki, I.↗
NASA NTRS1996

Stratospheric Chlorine partitioning: Constraints from Shuttle-borne Measurements of [HCl], [ClNO3] and [ClO]

Measured stratospheric mixing ratios of HCl, ClNO3, and ClO from ATMOS and MAS are poorly reproduced by models using recommended kinetic parameters. This discrepancy is not resolved by new rates for the reactions Cl+CH4 and OH+HCl derived from weighted fits to laboratory measurements. A deficit in modeled [HCl] and corresponding overprediction of [ClNO3] and [ClO], which increases with altitude, suggests that production of HCl between 20 and 50 km is much faster than predicted from recommended rates.

Michelsen, H. A.↗
NASA NTRS1983

Path discrepancies between great circle and rhumb line

A mathematical model for a comparative analysis of great circle vs. rhumb line navigation in the continental United States has been developed at the Avionics Engineering Center, Ohio University. A FORTRAN simulation of the model has been implemented on the IBM 370 computer. The simulation predicts pertinent navigation information for the two flight paths. The basis for the project, which is a part of an M.S. thesis, is to provide a data base for computing discrepancies between the two flight paths. This document briefly describes the model and discusses the implications of the results obtained.

Kaul, R.↗
NASA NTRS1975

Effect of the Jovian oblateness on Pioneer 10/11 radio occultations

The oblateness of Jupiter, which was neglected in the standard inversion technique for radio occultation data, has a substantial effect on the refractivity profiles of the neutral Jovian atmosphere derived from the Pioneer 10/11 occultations. The geometry of the Pioneer 10 entry and exit occultations has the effect that oblateness should account for much of the discrepancy of the results with plausible atmospheric models. The effect of the oblateness on Pioneer 11 entry is smaller, where much of the discrepancy could be due to other effects, such as cycle-slip in the spacecraft transponder. Theory indicates that the Pioneer 11 exit occultation should be affected by the oblateness in the opposite sense from the first three occultations; and, indeed, the data which had not been invertible under the spherical assumption produced reasonable results when an oblateness correction was applied.

Hubbard, W. B.↗
NASA NTRS1992

Solar models with enhanced energy transport in the core

The discrepancy between the observed and computed flux of solar neutrinos can be eliminated if the temperature gradient in the core of the model, and hence its central temperature, is reduced. This could in principle be accomplished by reducing the core opacity; alternatively, it has been proposed that a fraction of the energy transport in the solar core results from the motion of hypothetical particles (the so-called WIMPs). The resulting changes in solar structure have measurable effects on the frequencies of the solar 5-minute oscillations. Here, models are considered where the opacity in the solar core has been decreased in a manner which roughly simulates the effects of the WIMPs. The analysis of the models and their frequencies provides insight into the consequences of modifications to the physics of solar models. In particular, it is found that models with the observed neutrino flux are inconsistent with observations of low-degree solar oscillations.

Christensen-Dalsgaard, J.↗
NASA NTRS2022

Hybrid data-driven and model-informed online tool wear detection in milling machines

Precision machining tool wear is responsible for low product throughput and quality. Monitoring the tool wear online is vital to prevent degradation in machining quality. However, direct real-time tool wear measurement is not practical. This paper presents residual-based anomaly detection models, combining a hybrid model comprised of a physics-based model and a data-driven model (a decision tree or a neural network) to predict signals of interest (e.g., power or forces) under nominal conditions, followed by Page’s cumulative sum test for detecting tool wear on-line using the computer numerical control machine measurements. The most informative features are ranked using dynamic programming and its approximation variants from real-time measurements and machine settings, such as the width of cut, depth of cut, feed rate and spindle speed, that serve as inputs to the predictive models. The baseline nominal model is incrementally updated with experimental data via a gradient boosted adaptation model to generate the residuals that account for discrepancies between the actual machine data under normal conditions and the baseline nominal model predictions. The hybrid model is validated against 20 Mazak milling machine experimental tests and one Haas run-to-failure experiment. The proposed anomaly detector is applied to synthetic data from simulations of the physics-based model at different operating conditions, measurement noise levels, and tool wear levels, and the methods were able to achieve an overall 92% accuracy in data with 1% noise. The anomaly detection methods based on hybrid model reduced the false alarms of either the data-driven or physical-based models alone, and are found to be capable of good online detection of tool wear.

Online anomaly detection↗
NASA NTRS2024

Storm-Time Variability of Terrestrial Hydrogen Exosphere: Kinetic Simulation Results

Recent studies of TWINS Lyman-α observations have reported an increase in geocoronal column brightness during geomagnetic storms, indicating enhanced exospheric hydrogen atom density (NH). This suggests a complex role of exospheric neutrals in determining storm-time magnetosphere dynamics and their energy release through charge-exchange processes. We developed a Model for Analyzing Terrestrial Exosphere (MATE) to investigate storm-time exospheric behaviors and their physical drivers. MATE traces test hydrogen atoms backward in time from locations in the exosphere to a nominal exobase altitude of 500 km, employing Newtonian mechanics with gravitational force. The model then calculates the phase-space densities (PSDs) of test hydrogen atoms at the exobase using the Maxwellian distribution with physics-based exobase conditions from the TIMEGCM upper atmosphere model. MATE maps PSDs at the exobase to the exosphere using Liouville’s Theorem under collisionless assumptions and derives NH by integrating the PSDs across velocity space. We conducted MATE simulation before, during, and after a minor geomagnetic storm from 12 to 18 June 2008, and compared the model results with NH estimates from the TWINS geocorona data. MATE reproduces storm-time density enhancements soon after the minimum Dst is reached, matching well with a general trend of TWINS NH estimates. The results suggest that upper atmospheric heating during a geomagnetic storm increases the number of ballistic and escaping hydrogen atoms entering the exosphere from the exobase, thereby boosting NH. However, the magnitude of modeled NH mismatches the TWINS NH estimates. The potential mechanisms of this density discrepancy include the physics excluded in the MATE model — such as neutralneutral collisions, neutral-plasma charge exchange, solar radiation pressure, and photoionization — as well as the higher exobase hydrogen density of TIMEGCM compared to typical empirical values, which will be addressed in future.

Hyunju K Connor↗
NASA NTRS1978

Jupiter's atmosphere - Observations and interpretation of the microwave spectrum near 1.25-cm wavelength

Measurements of Jupiter's disk-temperature spectrum in the 20- to 24-GHz (1.5 cm less than lambda less than 1.25 cm) region are reported. These data are combined with previously published data to produce a uniformly calibrated thermal spectrum of Jupiter in the wavelength interval 0.85 to 2.1 cm. Model studies are carried out to determine optimum pressure-temperature profiles for an assumed radiative-convective temperature structure. It is found that the temperature at the 1-bar total effective pressure level is between 140 and 165 K, with a most probable value of 153 K, provided that NH3 is uniformly saturated in the clouds on a global scale. We show that the temperature profile for the microwave model is approximately 20 K cooler than the profiles derived from infrared data. An explanation of this discrepancy is discussed in terms of a model which invokes different NH3 distributions in the belts and zones.

Klein, M. J.↗
NASA NTRS1980

Theory of extrinsic and intrinsic heterojunctions in thermal equilibrium

A careful analysis of an abrupt heterojunction consisting of two distinct semiconductors either intrinsic or extrinsic is presented. The calculations apply to a one-dimensional, nondegenerate structure. Taking into account all appropriate boundary conditions, it is shown that the intrinsic Fermi level shows a discontinuity at the interface between the two materials which leads to a discontinuity of the valence band edge equal to the difference in the band gap energies of the two materials. The conduction band edge stays continuous however. This result is independent of possible charged interface states and in sharp contrast to the Anderson model. The reasons for this discrepancy are discussed.

Von Ross, O.↗
NASA NTRS1982

The role of S in the evolution of the parental cores of the iron meteorites

The S contents of iron meteorite parent bodies are estimated on the basis of cosmochemical relationships to undifferentiated meteorites, the results are compared to observations on the major magmatic iron meteorite groups, and evidence is presented that S/Ni ratios in their parent melts were much lower than those inferred for the parent body. Several alternative models to account for the discrepancy are offered, including volatilization of S from the IIAB parent body, liquid immiscibility, and metastable liquid layers produced by episodic melting. Finally, the fate of the S-rich meteoroidal material is discussed, as well as the question of why it seems to be missing from meteorite collections.

Kracher, A.↗
NASA NTRS1983

Balloon borne LIDAR measurements of stratospheric hydroxyl radical

A balloon-borne laser radar (LIDAR) system for determining the stratospheric hydroxyl radical concentration constructed and flown by the Goddard Space Flight Center is discussed. The system measured hydroxyl in the altitude range of 34-37 km during an afternoon and early evening, producing the first post-sunset hydroxyl determination ever obtained. Daytime values (approximately 5 x 10 to the 6th/cu cm) are somewhat lower than previous measurements using in situ resonance fluorescence. Nighttime values (approximately 7 x 10 to the 5th/cu cm at 2100 CDT) are found to be higher than predicted by current one-dimensional models. Possible sources of these discrepancies, together with improvements possible in future systems, are outlined.

Heaps, W. S.↗
NASA NTRS1985

Electron density in the equatorial topside

Ionospheric electron content studies have revealed severe discrepancies between Faraday measurements and model predictions at low latitudes. In this investigation, satellite data of AE-C and Aeros and incoherent scatter data from Jicamarca, Peru and Arecibo, Puerto Rico are used to examine the latitudinal and diurnal extent of this disagreement. It is found that in the modified dip range -30 deg to +30 deg the present IRI relative layer shape underestimates the thickness of the topside electron density during both, day and night. The Bent model which was used as a source for the IRI description performs somewhat better in this critical dip range, though it does not reach the observed values. Also it does not show the observed diurnal variation. A correction to the IRI formula is proposed that guarantees better agreement with the satellite and incoherent scatter data.

Bilitza, D.↗
NASA NTRS1987

New insights from a global view of X-ray bursts

It is shown here that the behavior of nuclear burning on accreting neutron stars depends on the mass accretion rate per unit area sigma-dot, the temperature T, and the column density of accreted matter sigma, and is thus intrinsically a three-dimensional problem. The concepts of a nuclear fuel surface and an ignition surface in (sigma-dot, T, sigma) space is introduced. It is shown that certain cuts taken through the ignition surface correspond to particular physical situations. It is found that at high temperatures a succession of hydrogen flashes leads eventually to a pure helium flash. At low temperatures, compressional heating completely determines the burst behavior. Burst sources are expected to show highly erratic behavior if they lie near the boundaries of the H and He ignition surfaces, resolving a major discrepancy between the thermonuclear flash model and observations.

Fushiki, Ikko↗
NASA NTRS1988

Wide binary stars at the Galactic poles

Results are reported from a search for high-Galactic-latitude wide binaries down to visual magnitude 14 on five digitized Schmidt-telescope plates. The data-reduction and analysis techniques are described in detail, and the results are presented in graphs and briefly characterized. The number of wide binaries and the estimated wide-binary number density are both three times smaller than those found by Bahcall and Soneira (1981), but still too large to be consistent with the predictions of physical models. Possible explanations for this discrepancy are explored.

Garnavich, Peter M.↗