Search NASA⌕ Search

SEARCH · Search NASA

Results for “observer mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

The "Quasar" Network Observations in e-VLBI Mode Within the Russian Domestic VLBI Programs

The purpose of the Russian VLBI "Quasar" Network is to carry out astrometrical and geodynamical investigations. Since 2006 purely domestic observational programs with data processing at the IAA correlator have been carried out. To maintain these geodynamical programs e-VLBI technology is being developed and tested. This paper describes the IAA activity of developing a real-time VLBI system using high-speed digital communication links.

Finkelstein, Andrey↗
NASA NTRS1996

Screech Tones from Rectangular Jets with Spanwise Oblique Shock-Cell Structures

Understanding screech is especially important for the design of advanced aircraft because screech can cause sonic fatigue failure of aircraft structures. Although the connection between shock-cell spacing and screech frequency is well understood, the relation between non-uniformities in the shock-cell structures and the resulting amplitude, mode, and steadiness of screech have remained unexplored. This paper addresses the above issues by intentionally producing spanwise (larger nozzle dimension) variations in the shock-cell structures and studying the resulting spanwise screech mode. The spanwise oblique shock-cell structures were produced using imperfectly expanded convergent-divergent rectangular nozzles (aspect ratio = 5) with nonuniform exit geometries. Three geometries were studied: (a) a nozzle with a spanwise uniform edge, (b) a nozzle with a spanwise oblique (single bevelled) edge, and (c) a nozzle that had two spanwise oblique (double bevelled) cuts to form an arrowhead-shaped nozzle. For all nozzles considered, the screech mode was antisymmetric in the transverse (smaller nozzle dimension) direction allowing focus on changes in the spanwise direction. Three types of spanwise modes were observed: symmetric (1), antisymmetric (2), and oblique (3). The following significant results emerged: (1) for all cases the screech mode corresponds with the spanwise shock-cell structure, (2) when multiple screech modes are present, the technique presented here makes it possible to distinguish between coexisting and mutually exclusive modes, (3) the strength of shocks 3 and 4 influences the screech source amplitude and determines whether screech is unsteady. The results presented here offer hope for a better understanding of screech and for tailoring shock-containing jets to minimize fatigue failure of aircraft components.

Raman, Ganesh↗
NASA NTRS1992

Vibronic spectra of Cu(2+) in ZnTe

Infrared-absorption spectra of substitutional Cu(2+) ions in ZnTe have been measured at 4.6 K. Several distinct absorption peaks are observed between 800 and 2000/cm. Absorption peaks at 1002 and 1069/cm are identified as zero-phonon lines arising from 2T2-2E transitions. Between 1069 and 2000/cm, several sets of sharp absorption lines are seen to recur regularly at an interval of 210/cm, corresponding to the LO phonon energy. Within each set distinct vibronic sidebands that cannot be identified with critical-point energies of TA, LA, TO or LO phonon modes are observed. A dynamic Jahn-Teller effect, involving coupling between a single-phonon mode and the electronic states of the 2E level, is proposed to account for the observed spectra.

Volz, M. P.↗
NASA NTRS1986

Plasma wave signatures of collisionless shocks and the role of plasma wave turbulence in shock formation

Observations of the plasma waves associated with collisionless shocks are reviewed, and the understanding of their generation mechanisms and their importance to shock physics are summarized. The emphasis is on waves generated directly at the shock, especially ion acoustic and lower-hybrid-like modes. The observations are discussed in the context of shock structure, with attention given to the distinctions between waves generated in the shock foot and ramp. The behavior of resistive, dispersive, and supercritical quasi-perpendicular shocks is contrasted. Evidence for the operation of various generation mechanisms, including interactions with cross-field currents, gyrating reflected ions, and field-aligned electron beams, are summarized. The various forms of plasma heating which are actually observed are outlined, and the role of the various wave modes in this heating is discussed. Conclusion, it is argued that, while plasma wave turbulence may play a vital role in plasma heating for some special shocks, it is of second-order importance in most cases.

Mellott, M. M.↗
NASA NTRS2009

Virtex-4VQ dynamic and mitigated single event upset characterization summary

This report is the result of funding by the NASA Electronic Parts and Packaging Program (NEPP) and the combined efforts of members within the Xilinx Radiation Test Consortium (XRTC), sometimes known as the Xilinx Single Event Effects (SEE) Test Consortium. The XRTC is a voluntary association of aerospace entities, including leading aerospace companies, universitie and national laboratories, combining resources to characterize reconfigurable, field programmable gate arrays (FPGAs) for aerospace applications. Previous publications of Virtex-4 radiation results are for commercial (non-epitaxial) devices; see, for example, Refs. 1–5. A notable exception is Ref. 6, which presents XRTC upset measurements of storage elements in the PowerPC405s in the XQR4VFX60. This work represents a continuation of the efforts reported in the “Virtex-4QV Static SEU Characterization Summary” [7]. The contents of this report describe various Single Event Functional Interrupt (SEFI) and Single Event Upset (SEU) modes seen while dynamically exercising the clocked resources within Virtex-4 devices and the corresponding mitigation techniques related to the aforementioned observed SEFI modes.

Allen, Gregory↗
NASA NTRS1992

On LAM's and SAM's for Halley's rotation

Non principal axis rotation for comet Halley is inferred from dual periodicities evident in the observations. The modes where the spin axis precesses around the axis of minimum moment of inertia (long axis mode or LAM) and where it precesses around the axis of maximum moment of inertia (short axis mode or SAM) are described from an inertial point of view. The currently favored LAM model for Halley's rotation state satisfies observational and dynamical constraints that apparently no SAM can satisfy. But it cannot reproduce the observed post perihelion brightening through seasonal illumination of localized sources on the nucleus, whereas a SAM can easily produce post or pre perihelion brightening by this mechanism. However, the likelihood of a LAM rotation for elongated nuclei of periodic comets such as Halley together with Halley's extreme post perihelion behavior far from the Sun suggest that Halley's post perihelion brightening may be due to effects other than seasonal illumination of localized sources, and therefore such brightening may not constrain its rotation state.

Peale, Stanton J.↗
NASA NTRS2004

Inducer Hydrodynamic Forces in a Cavitating Environment

Marshall Space Flight Center has developed and demonstrated a measurement device for sensing and resolving the hydrodynamic loads on fluid machinery. The device - a derivative of the six-component wind tunnel balance - senses the forces and moments on the rotating device through a weakened shaft section instrumented with a series of strain gauges. This rotating balance was designed to directly measure the steady and unsteady hydrodynamic loads on an inducer, thereby defining the amplitude and frequency content associated with operating in various cavitation modes. The rotating balance was calibrated statically using a dead-weight load system in order to generate the 6 x 12 calibration matrix later used to convert measured voltages to engineering units. Structural modeling suggested that the rotating assembly first bending mode would be significantly reduced with the balance s inclusion. This reduction in structural stiffness was later confirmed experimentally with a hammer-impact test. This effect, coupled with the relatively large damping associated with the rotating balance waterproofing material, limited the device s bandwidth to approximately 50 Hertz Other pre-test validations included sensing the test article rotating assembly built-in imbalance for two configurations and directly measuring the assembly mass and buoyancy while submerged under water. Both tests matched predictions and confirmed the device s sensitivity while stationary and rotating. The rotating balance was then demonstrated in a water test of a full-scale Space Shuttle Main Engine high-pressure liquid oxygen pump inducer. Experimental data was collected a scaled operating conditions at three flow coefficients across a range of cavitation numbers for the single inducer geometry and radial clearance. Two distinct cavitation modes were observed symmetric tip vortex cavitation and alternate-blade cavitation. Although previous experimental tests on the same inducer demonstrated two additional cavitation modes at lower inlet pressures, these conditions proved unreachable with the rotating balance installed due to the intense dynamic environment. The sensed radial load was less influenced by flow coefficient than by cavitation number or cavitation mode although the flow coefficient range was relatively narrow. Transition from symmetric tip vortex to alternate-blade cavitation corresponded to changes in both radial load magnitude and radial load orientation relative to the inducer. Sensed moments indicated that the effective load center moved downstream during this change in cavitation mode. An occurrence of "higher+rdex cavitation" was also detected in both the stationary pressures and the rotating balance data although the frequency of the phenomena was well above the reliable bandwidth of the rotating balance. In summary the experimental tests proved both the concept and device s capability despite the limitations and confirmed that hydrodynamically-induced forces and moments develop in response to the unbalanced pressure field, which is, in turn, a product of the cavitation environment.

Skelley, Stephen E.↗
NASA NTRS1983

Particulate erosion mechanisms

Particulate damage and erosion of ductile metals are today plaguing design and field engineers in diverse fields of engineering and technology. It was found that too many models and theories were proposed leading to much speculation from debris analysis and failure mechanism postulations. Most theories of solid particle erosion are based on material removal models which do not fully represent the actual physical processes of material removal. The various mechanisms proposed thus far are: melting, low-cycle fatigue, extrusion, delamination, shear localization, adhesive material transfer, etc. The experimental data on different materials highlighting the observed failure modes of the deformation and cutting wear processes using optical and scanning electron microscopy are presented. The most important mechanisms proved from the experimental observations of the specimens exposed to both spherical and angular particles are addressed, and the validity of the earlier theories discussed. Both the initial stages of damage and advanced stages of erosion were studied to gain a fundamental understanding of the process.

Veerabhadrarao, P.↗
DOE OSTI2024

Phase Selection During Solidification and Solid-State Phase Transformations in an Al-10Ce-8Mn (wt pct) Alloy

In multicomponent Al-Ce alloys, and especially after additive manufacturing (AM), complex and metastable solidification microstructures are frequently observed. Here, in this research, the relationship between solidification conditions and phase selection are explored for an Al-10Ce-8Mn (wt pct) alloy using a systematic study of laser melting conditions. Three solidification modes were observed: primary Al 10 Mn 2 Ce; primary Al 20 Mn 2 Ce; and eutectic FCC Al + Al 20 Mn 2 Ce. These solidification modes were correlated to specific liquid-solid interface velocities using a simple thermal model, showing the change in primary solidification phase for low (< 6.8 × 10 −4 m/s), moderate (between 8.2 × 10 −4 and 5.9 × 10 −2 m/s) and high solidification velocities (> 6.2 x 10 −2 m/s) for the above three solidification microstructures, respectively. These results were rationalized by using interface response function (IRF) theory to describe the solidification undercooling for the possible primary intermetallic phases. The implication of the local phase selection from differing solidification conditions is summarized by a comparison of hardness which demonstrates the potential variance of Vickers hardness from 101 to 242 (VHV) by changing the laser velocity from 1 to 83 mm/s. Interestingly, on heat treatment at 400°C, the decomposition pathways of the solidification microstructure and hardness were also found to be different, thereby opening multiple pathways for spatial microstructure and property control within AM components.

Sisco, Kevin↗
NASA NTRS1998

Oscillatory/Chaotic Thermocapillary Flow Induced by Radiant Heating

There is a continuing need to understand the fluid physics occurring under low gravity conditions in processes such as crystal growth, materials processing, and the movement of bubbles or droplets. The fluid flow in such situations is often caused by a gradient in interfacial tension. If a temperature gradient is created due to a heat source, the resulting flow is called thermocapillary flow, a special case of Marangoni Convection. In this study, an experimental investigation was conducted using silicone oil in cylindrical containers with a laser heat source at the free surface. It was desired to determine the conditions under which steady, axisymmetrical thermocapillary flow becomes unstable and oscillatory three-dimensional flow states develop. The critical Marangoni number for each observed oscillatory state was measured as a function of the container aspect ratio and the dynamic Bond number, a measure of buoyant force versus ii thermocapillary force. Various oscillatory modes were observed during three- dimensional convection, and chaotic flow was reached in one test condition. The critical Marangoni numbers are compared with those measured in previous studies, and the power spectra and phase trajectories of the instantaneous surface temperature distributions are used to characterize the routes of transitions to the chaotic flow state. Results show that only superharmonic modes appear in the routes to chaos while infinite number of subharmonic modes occur in flow transitions for pure Rayleigh convection.

DeWitt, Kenneth J.↗
NASA NTRS1994

Simultaneous soft and hard X-ray spectroscopy of AM Herculis with EXOSAT: Discovery of photospheric absorption features

We present 0.1-10 keV spectroscopic observations of AM Herculis obtained with the Transmission Grating Spectrometers and Medium Energy experiments on EXOSAT, taken when the object was in its 'reversed X-ray mode.' The observation covers over six binary orbits without interruption, enabling us to analyze the phase and intensity dependence of both the hard and the soft spectrum simultaneously. We resolve the optically thick soft X-ray spectrum, and find definite evidence for time- and phase-dependent photospheric absorption structure arising in the white dwarf atmosphere. We present a simple empirical analysis of the combined soft and hard X-ray spectra, to examine whether the effect of a better determination of the column density of neutral absorbing material, afforded by our data, would solve the problem of the large relative soft X-ray overluminosity previously observed in AM Her. We find that a single absorbing column fits the entire spectrum, and that the column densities implied are indeed substantially lower than previously estimated. However, during half the binary orbit we still determine a strong lower limit to the soft-to-hard luminosity ratio of L(sub soft)/L(sub hard) is greater than or approximately equal to 10, in conflict with the simple radiative shock models for the accretion region. We argue that this indicates the need to reexamine the luminosity problem using explicit models for the emission spectrum based on a full solution of the atmospheric radiative transfer problem.

Paerels, Frits↗
NASA NTRS1987

Electromagnetic ion beam instabilities - Growth at cyclotron harmonic wave numbers

The linear theory of electromagnetic ion beam instabilities for arbitrary angles of propagation is studied, with an emphasis on the conditions necessary to generate unstable modes at low harmonics of the ion cyclotron resonance condition. The present results extend the analysis of Smith et al. (1985). That paper considered only the plasma parameters at a time during which harmonic wave modes were observed in the earth's foreshock. The parameters of that paper are used as the basis of parametric variations here to establish the range of beam properties which may give rise to observable harmonic spectra. It is shown that the growth rates of both left-hand and right-hand cyclotron harmonic instabilities are enhanced by an increase in the beam temperature anisotropy and/or the beam speed. Decreases in the beam density and/or the core-ion beta reduce the overall growth of the cyclotron harmonic instabilities but favor the growth of these modes over the growth of the nonresonant instability and thereby enhance the observability of the harmonics.

Smith, Charles W.↗
NASA NTRS2011

Amplitude Noise Reduction of Ion Lasers with Optical Feedback

A reduction in amplitude noise on the output of a multi-mode continuous-wave Ar-ion laser was previously demonstrated when a fraction of the output power was retroreflected back into the laser cavity. This result was reproduced in the present work and a Fabry-Perot etalon was used to monitor the longitudinal mode structure of the laser. A decrease in the number of operating longitudinal cavity modes was observed simultaneously with the introduction of the optical feedback and the onset of the amplitude noise reduction. The noise reduction is a result of a reduced number of lasing modes, resulting in less mode beating and amplitude fluctuations of the laser output power.

Herring, Gregory C.↗
NASA NTRS1982

Detailed observations of the source of terrestrial narrowband electromagnetic radiation

Detailed observations are presented of a region near the terrestrial plasmapause where narrowband electromagnetic radiation (previously called escaping nonthermal continuum radiation) is being generated. These observations show a direct correspondence between the narrowband radio emissions and electron cyclotron harmonic waves near the upper hybrid resonance frequency. In addition, electromagnetic radiation propagating in the Z-mode is observed in the source region which provides an extremely accurate determination of the electron plasma frequency and, hence, density profile of the source region. The data strongly suggest that electrostatic waves and not Cerenkov radiation are the source of the banded radio emissions and define the coupling which must be described by any viable theory.

Kurth, W. S.↗
NASA NTRS2018

Increased Snowfall over the Antarctic Ice Sheet Mitigated Twentieth-Century Sea-Level Rise

Changes in accumulated snowfall over the Antarctic Ice Sheet have an immediate and time-delayed impact on global mean sea level. The immediate impact is due to the instantaneous change in freshwater storage over the ice sheet, whereas the time-delayed impact acts in opposition through enhanced ice dynamic flux into the ocean. Here, we reconstruct 200 years of Antarctic-wide snow accumulation by synthesizing a newly compiled database of ice core records using reanalysis derived spatial coherence patterns. The results reveal that increased snow accumulation mitigated twentieth-century sea-level rise by approximately 10 millimeters since 1901, with rates increasing from 1.1 mm per decade between 1901 and 2000 to 2.5 mm per decade after 1979. Reconstructed accumulation trends are highly variable in both sign and magnitude at the regional scale, and linked to the trend towards a positive Southern Annular Mode since 1957. Because the observed Southern Annular Mode trend is accompanied by a decrease in Antarctic Ice Sheet accumulation, changes in the strength and location of the circumpolar westerlies cannot explain the reconstructed increase, which may instead be related to stratospheric ozone depletion. However, our results indicate that a warming atmosphere cannot be excluded as a dominant force in the underlying increase.

Antarctic↗
NASA NTRS2018

Increased snowfall over the Antarctic Ice Sheet mitigated twentieth-century sea-level rise

Changes in accumulated snowfall over the Antarctic Ice Sheet have an immediate and time-delayed impact on global mean sea level. The immediate impact is due to the instantaneous change in freshwater storage over the ice sheet, whereas the time-delayed impact acts in opposition through enhanced ice-dynamic flux into the ocean1. Here, we reconstruct 200 years of Antarctic-wide snow accumulation by synthesizing a newly compiled database of ice core records2 using reanalysis-derived spatial coherence patterns. The results reveal that increased snow accumulation mitigated twentieth-century sea-level rise by ~10 mm since 1901, with rates increasing from 1.1 mm decade−1 between 1901 and 2000 to 2.5 mm decade−1 after 1979. Reconstructed accumulation trends are highly variable in both sign and magnitude at the regional scale, and linked to the trend towards a positive Southern Annular Mode since 19573. Because the observed Southern Annular Mode trend is accompanied by a decrease in Antarctic Ice Sheet accumulation, changes in the strength and location of the circumpolar westerlies cannot explain the reconstructed increase, which may instead be related to stratospheric ozone depletion4. However, our results indicate that a warming atmosphere cannot be excluded as a dominant force in the underlying increase.

B Medley↗
NASA NTRS1994

Observation of anomalous slow-mode shock and reconnection layer in the dayside magnetospause

Plasma and magnetic field data from the International Sun-Earth Explorer ISEE 2 spacecraft recorded during an outbound crossing of the dayside, northern hemisphere magnetopause in October 29, 1979, provide evidence for a slow shock (SS) in the observed reconnection layer. This layer is found to be bounded on the magnetosheath side by the SS; near the magnetospheric side of the layer, a second current sheet is found that may have been rotational discontinuity (RD). The direction of the accelerated plasma flow, the earthward sense of the normal magnetic filed across the SS and RD, and the relative orientation of the SS and the RD all indicate that the reconection site was located south of the spacecraft. Quantitative tests show that, allowing for experiemental uncertanties, data taken upstream and downstream of the SS are consistent with coplanarity and other Rankine-Hugoniot (RH) conditions. Examiniations of the flow parameters indicates two anomalous properties of the SS: the upstream flow, viewed in the deHoffmann-Teller frame, is superalfvenic and the downstream plasma is firehose unstable. In comparison to the long-wavelength slow-mode phase speed, however, the flow in the upstream region is super slow, while in the downstream region it is subslow, as requeired for a slow-mode shock. Further properties of the shock include a large decrease in total enthalpy across it, indicating the escape of a sizable heat flux from the shock structure, and the occurrence of a polarization reversal of the tangential magnetic field within the shock layer, a feature that is predicted by linear double-polytropic Hall-MHD and results from a large increase in pressure anistropy from the upstream region, where p(sub parallel) approximately equal to p(sub perp), to the downstream region, where p(sub parrallel) greater than p(sub perp). Quantitative tests of the RD-like discontinuity show that it satisfies the necessary RH conditions within experimental uncertainties and indicate that the flow across it is earthward, that is, it is the same as for the SS. Thus the RD is propagating behind the SS in the direction away from the Earth. The reversal in the order of the discontinuities is attributed to the reversal of the slow and intermediate phase speeds produced by the pressure anistropy in the region between the RD and the SS. The linear dispersion relation and polarization properties of dispersive MHD waves in an anisotropic plasma are examined in the appendix.

Walthour, D. W↗
NASA NTRS1995

Microstructure of the IMF turbulences at 2.5 AU

A detailed analysis of small period (15-900 sec) magnetohydrodynamic (MHD) turbulences of the interplanetary magnetic field (IMF) has been made using Pioneer-11 high time resolution data (0.75 sec) inside a Corotating Interaction Region (CIR) at a heliocentric distance of 2.5 AU in 1973. The methods used are the hodogram analysis, the minimum variance matrix analysis and the cohenrence analysis. The minimum variance analysis gives evidence of linear polarized wave modes. Coherence analysis has shown that the field fluctuations are dominated by the magnetosonic fast modes with periods 15 sec to 15 min. However, it is also shown that some small amplitude Alfven waves are present in the trailing edge of this region with characteristic periods (15-200 sec). The observed wave modes are locally generated and possibly attributed to the scattering of Alfven waves energy into random magnetosonic waves.

Mavromichalaki, H.↗