Search NASA⌕ Search

SEARCH · Search NASA

Results for “ocean worlds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Developing a Foundation for Space-Based Two-Phase Thermal Control Systems: Future of 2-Phase Thermal Control

Two-phase thermal control systems in microgravity, with significant density differences between phases, pose challenges for many current and proposed spacecraft systems. Because of the lack of understanding of these effects and the inability to scale multiphase systems in low gravity, NASA generally opts to avoid using two-phase systems for spacecraft despite the significant performance increases and lower mass. The goal of this panel discussion will be to identify key technology gaps and challenges that thermal engineers face today when considering a two-phase thermal management system. The panel discussion will begin with a brief overview of recent and on-going NASA projects designed to elicit a fundamental understanding of gas-liquid two phase behavior as it applies to thermal control systems in the Space environment. The projects/experiments discussed will range from boiling/condensation fundamentals, heat pipes, and cryogenic storage systems. We will identify what fundamental question or questions are being addressed in each case. An overview will be also be presented to address future mission needs and the specific advantages multi-phase systems offer, in particular for low cost planetary science missions and enabling missions in extreme environments. The need for efficient heat transfer with concurrent spatial and temporal temperature stability to reduce thermally-induced noise drives a serious look at multi-phase systems as a solution. Furthermore, missions to environments such as the Venus surface or penetration of ice layers in ocean worlds will likely require them. Time will be allocated at the end of this session to allow comments and questions from attendees. The intent is to use this session as a starting point to advocate for a coordinated technology development effort in this area.

Thermal Control Systems↗

Scientific and Technological Approaches to Searching for Extant Life in the Solar System

Future directions for investigations and measurements identified in the decadal survey Vision and Voyages for Planetary Science in the Decade 2013-2022 include direct methods to search for extant life. Within the framework a 35-year science vision for future decades extending into the 2020s and beyond, "Ocean Worlds" of the outer Solar System (e.g., Enceladus and Europa), as well as Mars, represent accessible targets that likely provide habitable environments that may support extant life. NASA Ames Research Center (ARC) is currently developing a multi-dimensional approach, led by astrobiology scientists in the ARC Space Sciences Division, technologists in the ARC Exploration Technology Directorate, and small payload engineers in the ARC Mission Design Division, to enable the definitive detection of extant extraterrestrial life in future NASA missions.

habitable environments↗

Electrochemical Detection of Biological Catalysts as Signatures of Extant Life

Liquid water is the quintessential ingredient for life. Biochemistry as we know it is not possible without it. There are two places in the Solar System, other than the Earth, where liquid water is known to exist: Europa and Enceladus. Cassini’s recent discovery of Enceladus’ ocean plumes has excited the scientific community about the possibility for liquid sampling and search for life. Characteristics of life are self-sustainability, its ability to evolve, and self-enclosure. To enable these, chemical energy must be utilized, information must be stored, and enclosing membranes must be built. Many of these processes are accomplished with the use of biological catalysts. To search for life in the ocean worlds, detection of biological catalysts serves as a strong marker of biological activity and thus life.

Koehne, J. E.↗

Comparison of Energy Conversion Technologies for Space Nuclear Power Systems

A key element of space nuclear power systems is the energy conversion subsystem that converts the nuclear heat into electrical power. Nuclear systems provide a favorable option for missions that require long-duration power in hostile space environments where sunlight for solar power is absent or limited. There are two primary nuclear power technology options: (1) radioisotope power systems (RPSs) utilize the natural decay heat from 238Pu to generate electric power levels up to about 1 kW and (2) fission power systems (FPSs) rely on a sustained fission reaction of 235U and offer the potential to supply electric power from kilowatts to megawatts. Example missions utilizing nuclear power include Mars science rovers (e.g., Curiosity, Mars 2020), lunar and Mars surface landers, crewed surface outposts, deep space planetary orbiters, Ocean World science landers, and robotic space probes that utilize nuclear electric propulsion. This report examines the energy conversion technology options that can be used with RPSs and FPSs, and provides an assessment of their relative performance.

Lee S Mason↗

Analysis of Sample Acquisition Dynamics Using Discrete Element Method

The analysis presented in this paper is conducted in the framework of the Ocean Worlds Autonomy Testbed for Exploration Research and Simulation (OceanWATERS) project, currently under development at NASA Ames Research Center. OceanWATERS aims at designing a simulation environment which allows for testing autonomy of scientific lander missions to the icy moons of our solar system. Mainly focused on reproducing the end effector interaction with the inherent terrain, this paper introduces a novel discrete element method (DEM)-based approach to determine forces and torques acting on the lander’s scoop during the sample acquisition process. An accurate force feedback from the terrain on the scoop is required by fault-detection and autonomous decision-making algorithms to identify when the requested torque on the robotic arm’s joints exceeds the maximum available torque. Knowledge of the terrain force feedback significantly helps evaluating the arm’s links structural properties and properly selecting actuators for the joints. Models available in literature constitute a partial representation of the dynamics of the interaction. As an example, Balovnev derived an analytical expression of the vertical and horizontal force acting on a bucket while collecting a sample as a function of its geometry and velocity, soil parameters and reached depth. Although the model represents an adequate approximation of the two force components, it ignores the direction orthogonal to the scoop motion and neglects the torque. This work relies on DEM analysis to compensate for analytical models’ deficiencies and inaccuracies, i. e. provide force and torque 3D vectors, defined in the moving reference (body) frame attached to the scoop, at each instant of the sample collection process. Results from the first presented analysis relate to the specific OceanWATERS sampling strategy, which consists of collecting the sample through five consecutive passes with increasing depth, each pass following the same circularlinear- circular trajectory. Data is collected given a specific scoop design interacting with two types of bulk materials, which may characterize the surface of icy planetary bodies: snow and ice. Although specifically concerned with the OceanWATERS design, this first analysis provides the expected force trends for similar sampling strategies and allows to deduce phenomenological information about the general scooping process. In order to further instruct the community on the use of DEM tools as a solution to the sampling collection problem, two more analyses have been carried out, mainly focused on reducing the DEM computation time, which increases with a decrease in particle size. After running a set of identical simulations, where the only changing parameter is the size of the spherical particle, it is observed that the resulting force trajectories, starting from a given particle size, converge to the true trend. It is deducible that a further decrease in size yields negligible improvements in the accuracy, while it sensibly increases computation time. A final analysis aims at discussing limitations of approximating bulk material particles having a complex shape, e. g. ice fragments, with spheres, by comparing force trends resulting in the two cases for the same simulation scenario.

Catanoso, Damiana↗

NASA Planetary Mission Concept Study: Assessing: Dwarf Planet Ceres' past and Present Habitability Potential

The Dawn mission revolutionized our understanding of Ceres during the same decade that has also witnessed the rise of ocean worlds as a research and exploration focus. We will report progress on the Planetary Mission Concept Study (PMCS) on the future exploration of Ceres under the New Frontiers or Flagship program that was selected for NASA funding in October 2019. At the time this writing, the study was just kicked off, hence this abstract reports the study plan as presented in the proposal.

Castillo-Rogez, J. C.↗

Portable Flow Device Using Fourier Ptychography Microscopy and Deep Learning for Detection of Biosignatures

A proof-of-concept, compact, portable Fourier Ptychographic Microscope (FPM) to perform wide field-of-view, high spatial resolution imaging (<1 μm) for biosignature motility in liquid samples, is presented. The FPM has the potential to be developed as a space-based payload for future landers destined to the Ocean Worlds. A portable FPM using an existing Fourier ptychography (FP) algorithm adapted for reconstruction is demonstrated. A NVIDIA Jetson Nano board and camera combined with FP, is used to computationally reconstruct sub-micron resolution images. Additionally, deep learning was employed to perform inferencing prediction which enables the on-edge FPM device.

Fourier↗

The Science Enabled by a Dedicated Solar System Space Telescope

The National Academy Committee on Astrobiology and Planetary Science (CAPS) made a recommendation to study a large/medium-class dedicated space telescope for planetary science, going beyond the Discovery-class dedicated planetary space telescope endorsed in Visions and Voyages. Such a telescope would observe targets across the entire solar system, engaging a broad spectrum of the science community. It would ensure that the high-resolution, high-sensitivity observations of the solar system in visible and UV wavelengths revolutionized by the Hubble Space Telescope could be extended. A dedicated telescope for solar system science would a) transform our understanding of time-dependent phenomena in our solar system that cannot be studied currently under programs to observe and visit new targets and b) enable a comprehensive survey and spectral characterization of minor bodies across the solar system, which requires a large time allocation not supported by existing facilities. The time-domain phenomena to be explored are critically reliant on UV observations and include: interaction of planetary magnetospheres with the solar wind and internal plasma sources, Venus and giant planet atmospheric dynamics, icy satellite geologic activity and surface evolution, cometary evolution, and evolving ring phenomena. This paper presents science themes and key questions that require a long-lasting space telescope dedicated to planetary science that can capture high-quality, consistent data at the required cadences that are free from the complicating effects of the terrestrial atmosphere and differences across observing facilities. Such a telescope would have excellent synergy with astrophysical facilities by placing planetary discoveries made by astrophysics assets in temporal context, as well as triggering detailed follow-up observations using larger telescopes. The telescope would also support future missions to the Ice Giants, Ocean Worlds, and minor bodies across the solar system by placing the results of such targeted missions in the context of longer records of temporal activities and larger sample populations.

C. L. Young↗

Surface Temperature and the Compositional Effects of Electron Bombardment on Dione

Saturn’s icy moons are composed of mostly water ice with minor “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within the extended plasma sheet of Saturn’s magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3]. Energetic electrons impact the surfaces, fracturing ice particles into sub-micron sized grains, and this process becomes more effective for increasing particle energies [4]. In addition to alteration of ices, the dark material may also be modified or generated within icy surfaces by interaction with solar UV radiation, cosmic rays, or by particles trapped in Saturn’s magnetic field [5]. CO2 could be sourced from irradiation of dark organic material [7]. Many of these alterations should be observable in Visible and Infrared Mapping Spectrometer (VIMS) spectra [8]. We used surface temperatures derived from Cassini’s Composite Infrared Spectrometer (CIRS) to help isolate areas where space weathering due to electron bombardment is more predominant and investigated the subtle changes in VIMS spectra using machine learning techniques. We present our results here for Dione. On ocean worlds, space weathering products would be present along with any potential indications of life. We will need to understand the manifestation of space weathering in the data to separate the two processes.

Cindy Lee Young↗

Ceres Planetary Mission Concept Study: Exploration of Ceres' Habitability

Dwarf planet Ceres is a compelling target as an evolved ocean world with recent and potentially ongoing geological activity. As the most water-rich body in the inner solar system after Earth (in absolute abundance), it is a representative of the population of planetesimals that brought volatiles and organics to the inner solar system. And, situated in the Main Belt of Asteroids, it is accessible enough to return a sample from within the resources of a typical medium-class (New Frontiers) NASA mission. Habitability is addressed via a combination of geological, geophysical, and compositional investigations. Past and ongoing activity is addressed via high-resolution imaging and gravity measurements from orbit near landforms interpreted as volcanic structures based on the Dawn observations. The depth of deep brines would be probed via electromagnetic sounding. Sample return would enable a vast range of experimental techniques to be applied with sensitivities and accuracies beyond those feasible with in situ instruments and would benefit from future facilities developments. Sample return could be executed with a single flight system with solar electric propulsion. The baseline design of the sample return capsule is inherited from the OSIRIS-REx mission. This concept also relies on the availability of key technologies: an enhanced landing vision system leveraging investments for Mars 2020; retractable/redeployable solar arrays, which have been demonstrated on the International Space Station but not at Ceres’ gravity; and a new design for sample transfer from the pneumatic sampling system to the sample return capsule based off Honeybee Robotics’ design for the MMX mission. The authors acknowledge support from NASA’s Planetary Mission Concept Study program. The information in this abstract is pre-decisional and is provided for planning and discussion purposes only.

K. E. Miller↗

TPS and Entry System Technologies for Future Mars and Titan Exploration

The purpose of this white paper is to provide an overview to the NRC Decadal Survey Mars and Ocean Worlds Sub-Panels on thermal protection system (TPS) technologies required for future Mars and Titan exploration missions. It considers the capability of heritage TPS technology used by previous Mars and Titan missions. A prime conclusion is that there are important advances regarding the availability of forebody TPS therefore, we recommend that NASA invest in a cross-cutting technology program that focuses on development and sustainment of relevant TPS materials, entry systems, test facilities, design tools, and flight instrumentation.

Thermal protection systems↗

Autonomous Measurement of Electrochemical Redox Couples for In-Situ Characterization of Enceladus Plume Samples

A 3D-printed microfluidic electrochemical cell with integrated electrodes was developed to demonstrate autonomous in-situ electrochemical characterization of terrestrial seawater samples. The system is designed to extend the capabilities of the 2008 Phoenix Lander’s Wet Chemistry Laboratory (WCL) that analyzed the soluble chemistry of the Martian soil, by miniaturizing its fluidic architecture for analysis of µL-volume samples as expected from an Enceladus fly-by mission. The microfluidic device has a total fluid volume of 48 µL and includes dual channels each populated with 7 electrodes. Measurement of pH was measured using an iridium oxide electrode. Cyclic voltammetry with Au, Pt, and glassy carbon working electrodes was used to measure redox couples in synthetic seawater that contained inorganic and bio-organic molecules. Glassy carbon was found to have minimal risk of interference from constituents of synthetic seawater when measuring molecular organic redox species; however, care must be used to prevent interference due to potential oxidation or dissolution in the case of Au working electrodes. A completely autonomous end-to-end run including sample delivery was performed, to demonstrate the feasibility of microfluidic-based cyclic voltammetry measurements for in-situ characterization of redox couples in Ocean World samples.

Planetary Instruments↗

TOPEX/POSEIDON Mission Overview

TOPEX/POSEIDON, a space mission jointly conducted by the United States and France, is the first space mission specifically designed and conducted for the study of the circulation of the world oceans.

radar↗

Preliminary Interplanetary Mission Design and Navigation for the Dragonfly New Frontiers Mission Concept

Dragonfly is one of two mission concepts selected in December 2017 to advance into Phase A of NASA’s New Frontiers competition. Dragonfly would address the Ocean Worlds mission theme by investigating Titan’s habitability and prebiotic chemistry and searching for evidence of chemical biosignatures of past (or extant) life. A rotorcraft lander, Dragonfly would capitalize on Titan’s dense atmosphere to enable mobility and sample materials from a variety of geologic settings. This paper describes Dragonfly’s baseline mission design giving a complete picture of the inherent tradespace and outlines the design process from launch to atmospheric entry.

Laipert, Frank E.↗

Plans and Concepts for a New Generation of RTGs for Planetary Science Missions

Of the six types of radioisotope thermoelectric generators NASA has flown in space, only the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) is currently available for spaceflight, and it relies on technology first used for RTGs in the 1970s. The MMRTG is a rugged power system capable of delivering 110W at launch. NASA is considering future missions with higher power demands however, and sponsored a study to identify concepts and plans to address those needs. The Director of NASA’s Planetary Sciences Division was briefed on a potential enhancement to the MMRTG in late-2012, just a couple of days after the landing of the Mars Science Laboratory rover, Curiosity, on Mars. NASA subsequently funded system-level engineering and technology maturation tasks for a proposed enhanced MMRTG, or eMMRTG, in fiscal year 2013. There was no plan to build a complete generator, rather the engineering of one, and the transfer of technology from laboratories at the Jet Propulsion Laboratory to industry were begun. NASA has now formed a Project to take the eMMRTG from technology to a qualification unit. This would form the first of a new generation of RTGs in 50 years. NASA has also formed a Project for a Next-Generation RTG concept based upon a study led by this author and a large team. NASA’s Radioisotope Power Systems (RPS) Program set the objective for the study to explore what possible options NASA has for Next-Generation-RTGs. The scope and breadth of the study included many possible destinations within the solar system, and traded a variety of RTG conceptual designs, and risk rated a variety of thermoelectric materials and couple configurations. Requirements were defined for the RTG concepts, a variety of thermoelectric materials were evaluated to find the most mature candidates, and performance was estimated for each RTG concept that could use the most mature of these new thermoelectric materials. The study relied upon mission concepts outlined in the latest Planetary Science Decadal Survey (2011), other more recent mission studies completed throughout the agency, and recent analyses of potential missions to ocean worlds to identify requirements that were not applied to previous RTGs but might prove valuable to these NG-RTGs. RTG concepts with maximal potential utility were identified as being modular and ranging in power output from 50 to 500W. A variety of RTG design concepts with several distinguishing characteristics were formulated. The plans and concepts for a new generation of RTGs (the eMMRTG and NG-RTG) will be discussed.

Woerner, David F.↗

Impact-driven mobilization of deep crustal brines on dwarf planet Ceres

Ceres, the only dwarf planet in the inner Solar System, appears to be a relict ocean world. Data collected by NASA's Dawn spacecraft provided evidence that global aqueous alteration within Ceres resulted in a chemically evolved body that remains volatile-rich(1). Recent emplacement of bright deposits sourced from brines attests to Ceres being a persistently geologically active world(2,3), but the surprising longevity of this activity at the 92-km Occator crater has yet to be explained. Here, we use new high-resolution Dawn gravity data to study the subsurface architecture of the region surrounding Occator crater, which hosts extensive young bright carbonate deposits (faculae). Gravity data and thermal modelling imply an extensive deep brine reservoir beneath Occator, which we argue could have been mobilized by the heating and deep fracturing associated with the Occator impact, leading to long-lived extrusion of brines and formation of the faculae. Moreover, we find that pre-existing tectonic cracks may provide pathways for deep brines to migrate within the crust, extending the regions affected by impacts and creating compositional heterogeneity. The long-lived hydrological system resulting from the impact might also occur for large impacts in icy moons, with implications for creation of transient habitable niches over time.High-resolution data of Ceres's bright spots (faculae), obtained by Dawn's second extended mission, suggest the existence of a deep brine-rich reservoir that emerged to the surface through long-lived cryovolcanic activity as a consequence of the impact that created Occator crater.

C. A. Raymond↗

Cold Survivable Current Sense Multi-Chip Module

This paper will present the design of a Current Sense Module (CSM) used to measure motor phase currents that is capable of surviving the harsh ambient environment of ocean worlds, such as Europa and Enceladus. The CSM module is fabricated by i3 Electronics using their Multi-Chip Module (MCM) technology with techniques developed by JPL to allow this module to survive temperatures down to -184°C. This module greatly improves the ability to measure phase and bridge current which can be problematic in extreme environments. In addition, by packaging these electronics at the die level, we achieve significant weight and size savings. This module is one of several modules that employ similar techniques that are integrated into a distributed or centralized motor controller. This paper will discuss the module’s design along with a summary of our test results.

Cheng, Ben↗

Titan's global map combining VIMS and ISS mosaics

Titan, Saturn’s largest moon, is the only ocean world, besides Earth, with a dense atmosphere. This outstanding feature is also a challenge since it was believed before the launch of the Cassini mission that optical cameras (visible and infrared) could not see the surface and that only radar instruments could map Titan’s surface. However, the Visual and Infrared Mapping Spectrometer (VIMS) and the Imaging Science Subsystem (ISS) onboard the Cassini spacecraft demonstrated that Titan’s surface can be observed in several infrared atmospheric windows.

Turtle, Elizabeth P.↗