Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Accelerating population balance-Monte Carlo simulation for coagulation dynamics from the Markov jump model, stochastic algorithm and GPU parallel computing

This paper proposes a comprehensive framework for accelerating population balance-Monte Carlo (PBMC) simulation of particle coagulation dynamics. By combining Markov jump model, weighted majorant kernel and GPU (graphics processing unit) parallel computing, a significant gain in computational efficiency is achieved. The Markov jump model constructs a coagulation-rule matrix of differentially-weighted simulation particles, so as to capture the time evolution of particle size distribution with low statistical noise over the full size range and as far as possible to reduce the number of time loopings. Here three coagulation rules are highlighted and it is found that constructing appropriate coagulation rule provides a route to attain the compromise between accuracy and cost of PBMC methods. Further, in order to avoid double looping over all simulation particles when considering the two-particle events (typically, particle coagulation), the weighted majorant kernel is introduced to estimate the maximum coagulation rates being used for acceptance–rejection processes by single-looping over all particles, and meanwhile the mean time-step of coagulation event is estimated by summing the coagulation kernels of rejected and accepted particle pairs. The computational load of these fast differentially-weighted PBMC simulations (based on the Markov jump model) is reduced greatly to be proportional to the number of simulation particles in a zero-dimensional system (single cell). Finally, for a spatially inhomogeneous multi-dimensional (multi-cell) simulation, the proposed fast PBMC is performed in each cell, and multiple cells are parallel processed by multi-cores on a GPU that can implement the massively threaded data-parallel tasks to obtain remarkable speedup ratio (comparing with CPU computation, the speedup ratio of GPU parallel computing is as high as 200 in a case of 100 cells with 10 000 simulation particles per cell). These accelerating approaches of PBMC are demonstrated in a physically realistic Brownian coagulation case. The computational accuracy is validated with benchmark solution of discrete-sectional method. The simulation results show that the comprehensive approach can attain very favorable improvement in cost without sacrificing computational accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

PASTA: A Parallel Sparse Tensor Algorithm Benchmark Suite

Tensor methods have gained increasingly attention from various applications, including machine learning, quantum chemistry, healthcare analytics, social network analysis, data mining, and signal processing, to name a few. Sparse tensors and their algorithms become critical to further improve the performance of these methods and enhance the interpretability of their output. This work presents a sparse tensor algorithm benchmark suite (PASTA) for single- and multi-core CPUs. To the best of our knowledge, this is the first benchmark suite for sparse tensor world. PASTA targets on: 1) helping application users to evaluate different computer systems using its representative computational workloads; 2) providing insights to better utilize existed computer architecture and systems and inspiration for the future design. This benchmark suite will be publicly released.

HPC, sparse tensor, benchmark↗
DOE OSTI2019

Speeding up Particle Track Reconstruction in the CMS Detector using a Vectorized and Parallelized Kalman Filter Algorithm

Building particle tracks is the most computationally intense step of event reconstruction at the LHC. With the increased instantaneous luminosity and associated increase in pileup expected from the High-Luminosity LHC, the computational challenge of track finding and fitting requires novel solutions. The current track reconstruction algorithms used at the LHC are based on Kalman filter methods that achieve good physics performance. By adapting the Kalman filter techniques for use on many-core SIMD architectures such as the Intel Xeon and Intel Xeon Phi and (to a limited degree) NVIDIA GPUs, we are able to obtain significant speedups and comparable physics performance. New optimizations, including a dedicated post-processing step to remove duplicate tracks, have improved the algorithm's performance even further. Here we report on the current structure and performance of the code and future plans for the algorithm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Designing a parallel Feel-the-Way clustering algorithm on HPC systems

This paper introduces a new parallel clustering algorithm, named Feel-the-Way clustering algorithm, that provides better or equivalent convergence rate than the traditional clustering methods by optimizing the synchronization and communication costs. Our algorithm design centers on how to optimize three factors simultaneously: reduced synchronizations, improved convergence rate, and retained same or comparable optimization cost. To compare the optimization cost, we use the Sum of Square Error (SSE) cost as the metric, which is the sum of the square distance between each data point and its assigned clusters. Compared with the traditional MPI k-means algorithm, the new Feel-the-Way algorithm requires less communications among participating processes. As for the convergence rate, the new algorithm requires fewer number of iterations to converge. As for the optimization cost, it obtains the SSE costs that are close to the k-means algorithm. In the paper, we first design the full-step Feel-the-Way k-means clustering algorithm that can significantly reduce the number of iterations that are required by the original k-means clustering method. Next, we improve the performance of the full-step algorithm by adopting an optimized sampling-based approach, named reassignment-history-aware sampling. Our experimental results show that the optimized sampling-based Feel-the-Way method is significantly faster than the widely used k-means clustering method, and can provide comparable optimization costs. More extensive experiments with several synthetic datasets and real-world datasets (e.g., MNIST, CIFAR-10, ENRON, and PLACES-2) show that the new parallel algorithm can outperform the open source MPI k-means library by up to 110% on a high-performance computing system using 4,096 CPU cores. In addition, the new algorithm can take up to 51% fewer iterations to converge than the k-means clustering algorithm.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2014

On Parallel Push-Relabel based Algorithms for Bipartite Maximum Matching

We study multithreaded push-relabel based algorithms for computing maximum cardinality matching in bipartite graphs. Matching is a fundamental combinatorial (graph) problem with applications in a wide variety of problems in science and engineering. We are motivated by its use in the context of sparse linear solvers for computing maximum transversal of a matrix. We implement and test our algorithms on several multi-socket multicore systems and compare their performance to state-of-the-art augmenting path-based serial and parallel algorithms using a testset comprised of a wide range of real-world instances. Building on several heuristics for enhancing performance, we demonstrate good scaling for the parallel push-relabel algorithm. We show that it is comparable to the best augmenting path-based algorithms for bipartite matching. To the best of our knowledge, this is the first extensive study of multithreaded push-relabel based algorithms. In addition to a direct impact on the applications using matching, the proposed algorithmic techniques can be extended to preflow-push based algorithms for computing maximum flow in graphs.

Push-relabel, matching, bipartite↗
DOE OSTI2020

Parallel Particle Advection Bake-Off for Scientific Visualization Workloads

There are multiple algorithms for parallelizing particle advection for scientific visualization workloads. While many previous studies have contributed to the understanding of individual algorithms, our study aims to provide a holistic understanding of how algorithms perform relative to each other on various workloads. To accomplish this, we consider four popular parallelization algorithms and run a “bake-off” study (i.e., an empirical study) to identify the best matches for each. The study includes 216 tests, going to a concurrency of up to 8192 cores and considering data sets as large as 34 billion cells with 300 million particles. Overall, our study informs three important research questions: (1) which parallelization algorithms perform best for a given workload?, (2) why?, and (3) what are the unsolved problems in parallel particle advection? In terms of findings, we find that the seeding box is the most important factor in choosing the best algorithm, and also that there is a significant opportunity for improvement in execution time, scalability, and efficiency.

Pugmire, Dave↗
DOE OSTI2014

A Scalable O(N) Algorithm for Large-Scale Parallel First-Principles Molecular Dynamics Simulations

Traditional algorithms for first-principles molecular dynamics (FPMD) simulations only gain a modest capability increase from current petascale computers, due to their O(N 3 ) complexity and their heavy use of global communications. To address this issue, we are developing a truly scalable O(N) complexity FPMD algorithm, based on density functional theory (DFT), which avoids global communications. The computational model uses a general nonorthogonal orbital formulation for the DFT energy functional, which requires knowledge of selected elements of the inverse of the associated overlap matrix. We present a scalable algorithm for approximately computing selected entries of the inverse of the overlap matrix, based on an approximate inverse technique, by inverting local blocks corresponding to principal submatrices of the global overlap matrix. The new FPMD algorithm exploits sparsity and uses nearest neighbor communication to provide a computational scheme capable of extreme scalability. Accuracy is controlled by the mesh spacing of the finite difference discretization, the size of the localization regions in which the electronic orbitals are confined, and a cutoff beyond which the entries of the overlap matrix can be omitted when computing selected entries of its inverse. We demonstrate the algorithm's excellent parallel scaling for up to O(100K) atoms on O(100K) processors, with a wall-clock time of O(1) minute per molecular dynamics time step.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Efficient Delaunay Tessellation through K-D Tree Decomposition

Delaunay tessellations are fundamental data structures in computational geometry. They are important in data analysis, where they can represent the geometry of a point set or approximate its density. The algorithms for computing these tessellations at scale perform poorly when the input data is unbalanced. We investigate the use of k-d trees to evenly distribute points among processes and compare two strategies for picking split points between domain regions. Because resulting point distributions no longer satisfy the assumptions of existing parallel Delaunay algorithms, we develop a new parallel algorithm that adapts to its input and prove its correctness. We evaluate the new algorithm using two late-stage cosmology datasets. The new running times are up to 50 times faster using k-d tree compared with regular grid decomposition. Moreover, in the unbalanced data sets, decomposing the domain into a k-d tree is up to five times faster than decomposing it into a regular grid.

Morozov, Dmitriy↗
DOE OSTI2012

Multithreaded Algorithms for Maximum Matching in Bipartite Graphs

Abstract—We design, implement, and evaluate algorithms for computing a matching of maximum cardinality in a bipartite graph on multi-core and massively multithreaded computers. As computers with larger number of slower cores dominate the commodity processor market, the design of multithreaded algorithms to solve large matching problems becomes a necessity. Recent work on serial algorithms based on searching for augmenting paths for this problem have shown that their performance is sensitive to the order in which the vertices are processed for matching. In a multithreaded environment, imposing a serial order in which vertices are considered for matching would lead to loss of concurrency and performance. But this raises the question: Would parallel matching algorithms on multithreaded machines improve performance over a serial algorithm? We answer this question in the affirmative. We report efficient multithreaded implementations of two key algorithms (Hopcroft- Karp based on breadth-first-search, and Pothen-Fan based on depth-first-search) and their variants, combined with the Karp- Sipser initialization algorithm. We report extensive results and insights using three shared-memory platforms (a 48-core AMD Opteron, a 32-core Intel Nehalem, and a 128-processor Cray XMT) on a representative set of real-world and synthetic graphs. To the best of our knowledge, this is the first extensive study of augmentation-based parallel algorithms for bipartite cardinality matching.

Azad, Md Ariful↗
DOE OSTI2025

A scalable multidimensional fully implicit solver for Hall magnetohydrodynamics

We propose an optimally performant fully implicit algorithm for the Hall magnetohydrodynamics (HMHD) equations based on multigrid-preconditioned Jacobian-free Newton-Krylov methods. HMHD is a challenging system to solve numerically because it supports stiff fast dispersive waves. The preconditioner is formulated using an operator-split approximate block factorization (Schur complement), informed by physics insight. We use a vector-potential formulation (instead of a magnetic field one) to allow a clean segregation of the problematic $\nabla$ x $\nabla$ x operator in the electron Ohm's law subsystem. This segregation allows the formulation of an effective damped block-Jacobi smoother for multigrid. We demonstrate by analysis that our proposed block-Jacobi iteration is convergent and has the smoothing property. The resulting HMHD solver is verified linearly with wave propagation examples, and nonlinearly with the GEM challenge reconnection problem by comparison against another HMHD code. We demonstrate the excellent algorithmic and parallel performance of the algorithm up to 16384 MPI tasks in two dimensions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2011

Parallelization of the Red-Black Algorithm on Solving the Second-Order PN Transport Equation with the Hybrid Finite Element Method

The Red-Black algorithm has been successfully applied on solving the second-order parity transport equation with the PN approximation in angle and the Hybrid Finite Element Method (HFEM) in space, i.e., the Variational Nodal Method (VNM) [1,2,3,4,5]. Any transport solving techniques, including the Red-Black algorithm, need to be parallelized in order to take the advantage of the development of supercomputers with multiple processors for the advanced modeling and simulation. To our knowledge, an attempt [6] was done to parallelize it, but it was devoted only to the z axis plans in three-dimensional calculations. General parallelization of the Red-Black algorithm with the spatial domain decomposition has not been reported in the literature. In this summary, we present our implementation of the parallelization of the Red-Black algorithm and its efficiency results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2017

Families of Graph Algorithms: SSSP Case Study

Single-Source Shortest Paths (SSSP) is a well-studied graph problem. Examples of SSSP algorithms include the original Dijkstra’s algorithm and the parallel Δ-stepping and KLA-SSSP algorithms. In this paper, we use a novel Abstract Graph Machine (AGM) model to show that all these algorithms share a common logic and differ from one another by the order in which they perform work. We use the AGM model to thoroughly analyze the family of algorithms that arises from the common logic. We start with the basic algorithm without any ordering (Chaotic), and then we derive the existing and new algorithms by methodically exploring semantic and spatial ordering of work. Our experimental results show that new derived algorithms show better performance than the existing distributed memory parallel algorithms, especially at higher scales.

distributed-memory graph algorithms↗
DOE OSTI2018

Synchronization-Avoiding Graph Algorithms

Because they were developed for optimal sequential complexity, classical graph algorithms as found in textbooks have strictly-defined orders of operations. Enforcing a prescribed order of operations, or even an approximate order, in a distributed memory setting requires significant amounts of synchronization, which in turn can severely limit scalability. As a result, new algorithms are typically required to achieve scalable performance, even for solving well-known graph problems. Yet, even in these cases, parallel graph algorithms are written according to parallel programming models that evolved for, e.g., scientific computing, and that still have inherent, and scalability-limiting, amounts of synchronization. In this paper we present a new approach to parallel graph algorithms: synchronization-avoiding algorithms. To eliminate synchronization and its associated overhead, synchronization-avoiding algorithms perform work in an unordered and fully asynchronous fashion in such a way that the result is constantly refined toward its final state. “Wasted” work is minimized by locally prioritizing tasks using problem-dependent task utility metrics. We classify algorithms for graph applications into two broad categories: algorithms with monotonic updates (which evince global synchronization) and algorithms with nonmonotonic updates (which evince vertex-centric synchronization). We apply our approach to both classes and develop novel, synchronization-avoiding algorithms for solving exemplar problems: SSSP and connected components for the former, graph coloring for the latter. We demonstrate that eliminating synchronization in conjunction with effective scheduling policies and optimizations in the runtime results in improved scalability for both classes of algorithms.

Firoz, Jesun S.↗
DOE OSTI2018

A distributed-memory approximation algorithm for maximum weight perfect bipartite matching

We design and implement an efficient parallel approximation algorithm for the problem of maximum weight perfect matching in bipartite graphs, i.e. the problem of finding a set of non-adjacent edges that covers all vertices and has maximum weight. This problem differs from the maximum weight matching problem, for which scalable approximation algorithms are known. It is primarily motivated by finding good pivots in scalable sparse direct solvers before factorization where sequential implementations of maximum weight perfect matching algorithms, such as those available in MC64, are widely used due to the lack of scalable alternatives. To overcome this limitation, we propose a fully parallel distributed memory algorithm that first generates a perfect matching and then searches for weightaugmenting cycles of length four in parallel and iteratively augments the matching with a vertex disjoint set of such cycles. For most practical problems the weights of the perfect matchings generated by our algorithm are very close to the optimum. An efficient implementation of the algorithm scales up to 256 nodes (17,408 cores) on a Cray XC40 supercomputer and can solve instances that are too large to be handled by a single node using the sequential algorithm.

Azad, Ariful↗