Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase two”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Two phase flow LH2 pump inducers

Design, performance characteristics and testing of two-phase hydrogen pump inducer for use in future spacecraft systems

King, J. A.↗
NASA NTRS1981

A pumped, two-phase flow heat transport system for orbiting instrument payloads

A pumped two-phase (heat absorption/heat rejection) thermal transport system for orbiting instrument payloads is investigated. The thermofluid characteristics necessary for the system design are discussed. A preliminary design with a series arrangement of four instrument heat stations and six radiators in a single loop is described in detail, and the total mass is estimated to be 134 kg, with the radiators, instrument heat stations, and fluid reservoir accounting for approximately 86, 24, and 12 kg, respectively. The evaluation of preliminary test results shows that the system has potential advantages; however, further research is necessary in the areas of one-g and zero-g heat transfer coefficients/fluid regimes, fluid by-pass temperature control, and reliability of small pumps.

Fowle, A. A.↗
NASA NTRS1994

Bubble dynamics, two-phase flow, and boiling heat transfer in a microgravity environment

The two-phase bubbly flow and boiling heat transfer in microgravity represents a substantial challenge to scientists and engineers and yet there is an urgent need to seek fundamental understanding in this area for future spacecraft design and space missions. At Washington State University, we have successfully designed, built and tested a 2.1 second drop tower with an innovation airbag deceleration system. Microgravity boiling experiments performed in our 0.6 second Drop Tower produced data flow visualizations that agree with published results and also provide some new understanding concerning flow boiling and microgravity bubble behavior. On the analytical and numerical work, the edge effects of finite divergent electrode plates on the forces experienced by bubbles were investigated. Boiling in a concentric cylinder microgravity and an electric field was numerically predicted. We also completed a feasibility study for microgravity boiling in an acoustic field.

Chung, Jacob N.↗
NASA NTRS1990

A turbulent two-phase flow model for nebula flows

A new and very efficient turbulent two-phase flow numericaly model is described to analyze the environment of a protoplanetary nebula at a stage prior to the formation of planets. Focus is on settling processes of dust particles in flattened gaseous nebulae. The model employs a perturbation technique to improve the accuracy of the numerical simulations of such flows where small variations of physical quantities occur over large distance ranges. The particles are allowed to be diffused by gas turbulence in addition to settling under gravity. Their diffusion coefficients is related to the gas turbulent viscosity by the non-dimensional Schmidt number. The gas turbulent viscosity is determined by the means of the eddy viscosity hypothesis that assumes the Reynolds stress tensor proportional to the mean strain rate tensor. Zero- and two-equation turbulence models are employed. Modeling assumptions are detailed and discussed. The numerical model is shown to reproduce an existing analytical solution for the settling process of particles in an inviscid nebula. Results of nebula flows are presented taking into account turbulence effects of nebula flows. Diffusion processes are found to control the settling of particles.

Champney, Joelle M.↗
NASA NTRS1987

Two-phase measurements of a spray in the wake of a bluff body

The dynamics of spray drop interaction with the turbulent, recirculating wake of a flat disk bluff body were investigated using a phase Doppler particle analyzer to determine drop size and velocity and the gas-phase velocity. Detailed measurements obtained included spray drop size, axial and radial velocity, angle of trajectory, and size-velocity correlations. The gas-phase velocity was determined from seeding of the two-phase flow. Results showed dramatic differences in drop behavior for various size classes when interacting with the turbulent flow field. Small drops were quickly entrained and recirculated, while initially, the larger drops continued in the general direction of the spray cone. Further downstream, significant numbers of large drops recirculated, generating a bifurcated size-velocity correlation. These lateral convections and streamwise accelerations and decelerations strongly influenced the number density along with size and velocity distributions. The complex interaction of the spray with the turbulent air-flow points out the need for spatially-resolved measurements that determine drop behavior for individual size classes, rather than characterizing a spray only via simple integral quantities such as the Sauter mean diameter.

Rudoff, R. C.↗
NASA NTRS1981

Two-phase flow and heat transfer under low gravity

Spacelab experiment to investigate two-phase flow patterns under gravity uses a water-air mixture experiment. Air and water are circulated through the system. The quality or the mixture or air-water is controlled. Photographs of the test section are made and at the same time pressure drop across the test section is measured. The data establishes a flow regime map under reduced gravity conditions with corresponding pressure drop correlations. The test section is also equipped with an electrical resistance heater in order to allow a flow boiling experiment to be carried out using Freon II. High-speed photographs of the test section are used to determine flow patterns. The temperature gradient and pressure drop along the duct can be measured. Thus, quality change can be measured, and heat transfer calculated.

Walter Frost↗
NASA NTRS1984

Staging Two-Phase Turbines

Staging method solves problem of friction loss and low efficiency of two phase (liquid/gas) flow in turbines by using high blade-tip speeds in first stage for progressively lower tip speeds in succeeding stages.

Elliott, D. G.↗
NASA NTRS1994

Studies of two phase flow

The development of instrumentation for the support of research in two-phase flow in simulated microgravity conditions was performed. The funds were expended in the development of a technique for characterizing the motion and size distribution of small liquid droplets dispersed in a flowing gas. Phenomena like this occur in both microgravity and normal earth gravity situations inside of conduits that are carrying liquid-vapor mixtures at high flow rates. Some effort to develop a conductance probe for the measurement of liquid film thickness was also expended.

Witte, Larry C.↗
NASA NTRS1993

An analytic study of a two-phase laminar airfoil in simulated heavy rain

A mathematical model for a two-phase flow laminar airfoil in simulated heavy rain has been established. The set of non-linear partial differential equations has been converted into a set of finite difference equations; appropriate initial and boundary conditions are provided. The numerical results are compared with the experimental measurements. They show good agreement in quality.

Hsu, Yu-Kao↗
NASA NTRSDate not supplied

Validation of a Two-Phase CFD Model for Autogenous Pressurization and Expulsion

This paper presents a two-phase CFD model for tank pressurization and expulsion in a liquid hydrogen cryogenic storage tank. The model uses a Volume-of-Fluid approach combined with the Kinetics-based Schrage equation to capture the phase boundary and the associated interfacial heat, mass, and momentum transfer between the liquid and vapor regions. The CFD model is validated against expulsion data from the NASA K-Site tank experiment. Predicted tank pressures, temperatures, and pressurant requirements are compared with the experimental data to demonstrate the model’s accuracy.

Autogenous Pressurization↗
NASA NTRSDate not supplied

Validation of a Two-Phase CFD Model for Autogenous Pressurization and Expulsion

This paper presents a two-phase computational fluid dynamics (CFD) model for simulating autogenous pressurization and expulsion in a cryogenic liquid hydrogen storage tank, utilizing a volume-of-fluid (VOF) approach combined with the kinetics-based Schrage equation to accurately capture the phase boundary and interfacial heat, mass, and momentum transfer between liquid and vapor phases. The model is validated against experimental data from NASA's K-site tank facility, specifically experimental case 225, which involved pressurization and controlled expulsion of liquid hydrogen. Various turbulence models are evaluated to assess their influence on model accuracy. The CFD simulations successfully replicate key thermodynamic behaviors observed during the experiments, including pressure evolution, temperature profiles, and phase-change dynamics at the vapor-liquid interface. The predicted tank pressures, temperatures, and pressurant requirements agree with experimental data, with pressurant mass predictions within 16\% of observed values. This study highlights the importance of selecting appropriate turbulence models to accurately simulate complex flow and heat transfer phenomena during tank pressurization and expulsion. By enhancing the accuracy and reliability of CFD models for liquid hydrogen under cryogenic conditions, this research contributes to developing efficient cryogenic propellant management strategies for future space missions.

Computational Fluid Dynamics↗