SEARCH · Search NASA
Results for “platform”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In Situ Analysis of Electron-Induced Chemical Transformations in Vapor-Phase-Synthesized Al-Based Inorganic–Organic Hybrid Thin Films for EUV Resist Platform
The rapid advancement and stringent requirements of extreme ultraviolet (EUV) lithography technology necessitate the development of advanced photoresist systems for next-generation microelectronics. Recent studies have demonstrated that inorganic-based hybrid photoresists offer notable improvements in EUV sensitivity, etch resistance, and greater insusceptibility to pattern collapse compared to their purely organic counterparts. However, variations in the synthesis/coating approaches and chemistry of inorganic–organic photoresists can result in distinct exposure mechanisms. In this work, an Al-based hybrid thin film resist system synthesized via molecular (atomic) layer deposition (MLD or MALD) is explored, focusing on its electron-beam and EUV patterning mechanisms. The Al-based hybrid thin films are deposited using trimethylaluminum (TMA) and the organic precursor hydroquinone, exhibiting a saturated growth rate within the temperature range of 150–200°C. In diluted tetramethylammonium hydroxide (TMAH)-based developer solutions, the electron-irradiated Al-based hybrid thin film system behaves as a negative tone resist, achieving a sensitivity of 10.4 mC/cm 2 at 0.1 kV electron beam lithography (EBL). Chemical changes induced by electron exposure are also analyzed in this study using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and a unique infrared spectroscopy setup, revealing the potential cross-linking pathways. To further correlate the electron-induced chemical transformations with those mediated by EUV irradiations, a combination of X-ray photoemission electron microscopy/low-energy electron microscopy (XPEEM/LEEM) system is also employed. In conclusion, this study provides critical insights into the mechanisms underlying solubility switching and contributes to the design of advanced resist materials for EUV lithography.
A High-Throughput Screening Platform for Engineering Poly(ethylene Terephthalate) Hydrolases
Not Available
Molecular Diradical Spin Qubits in a Crystalline Host as a Platform for Quantum Sensing
Doping a luminescent tris(2,4,6-trichlorophenyl)methyl diradical m (TTM) 2 into a host crystal of its diamagnetic precursor m (HTTM) 2 creates a molecular color center with enhanced optical-spin interface properties important for quantum sensing. Optical polarization of the |T 0 ⟩ sublevel of the diradical triplet ground state is achieved by spin-selective intersystem crossing from the |T + ⟩ and |T – ⟩ sublevels of the triplet excited state at ambient and cryogenic temperatures. Coherent spin control of m (TTM) 2 doped into m (HTTM) 2 using pulsed optically detected magnetic resonance (ODMR) spectroscopy results in a 10-fold improvement in ODMR contrast over that observed for randomly oriented m (TTM)2 using continuous-wave ODMR. The diradical doped crystal powders achieve spin coherence times of 2.8, 3.4, and 7.4 μs at 294, 85, and 5 K, respectively. The diradical photoluminescence is sensitive to weak applied magnetic fields independent of temperature, excitation wavelength, and dopant concentration, providing a promising pathway toward robust quantum sensing of anisotropic magnetic fields under ambient conditions.
Chloroplast Cell-Free Systems from Different Plant Species as a Rapid Prototyping Platform
Not Available
Uric Acid Monohydrate Nanocrystals: An Adaptable Platform for Nitrogen and Salt Management in Reptiles
Explore the source record for details and available documents.
Autonomous platform for solution processing of electronic polymers
The manipulation of electronic polymers’ solid-state properties through processing is crucial in electronics and energy research. Yet, efficiently processing electronic polymer solutions into thin films with specific properties remains a formidable challenge. We introduce Polybot, an artificial intelligence (AI) driven automated material laboratory designed to autonomously explore processing pathways for achieving high-conductivity, low-defect electronic polymers films. Leveraging importance-guided Bayesian optimization, Polybot efficiently navigates a complex 7-dimensional processing space. In particular, the automated workflow and algorithms effectively explore the search space, mitigate biases, employ statistical methods to ensure data repeatability, and concurrently optimize multiple objectives with precision. The experimental campaign yields scale-up fabrication recipes, producing transparent conductive thin films with averaged conductivity exceeding 4500 S/cm. Feature importance analysis and morphological characterizations reveal key design factors. This work signifies a significant step towards transforming the manufacturing of electronic polymers, highlighting the potential of AI-driven automation in material science.
Cost-effective urine recycling enabled by a synthetic osteoyeast platform for production of hydroxyapatite
Not Available
Single-cell chromatin accessibility and cis -regulatory element analyses in plants using the scPlantReg platform
Understanding gene regulation is fundamental to plant improvement, but the lack of plant-specific single-cell assay for transposase-accessible chromatin using sequencing (scATAC-seq) frameworks and cross-species databases has limited insights into cell-type-specific cellular regulation. Here we present ‘scPlantReg’, an integrated framework and database for plant scATAC-seq data. scPlantReg supports end-to-end analyses from raw data processing to biological interpretation and features ‘scATACtor’, a supervised machine-learning approach that outperforms existing tools for cell-type annotation. We applied scPlantReg to pearl millet to characterize cell-type-specific chromatin accessibility and identify validated activating and repressing accessible chromatin regions (ACRs), revealing WRKY transcription factors as potential regulators of xylem development. Furthermore, we reanalysed scATAC-seq datasets from 8 plant species, spanning 11 tissues and multiple developmental stages, enabling cross-species comparisons. Furthermore, these analyses uncovered conserved regulatory programmes, including AP2/EREBP-associated ACRs linked to cell wall development and cell-type-conserved TFs across grasses. Collectively, scPlantReg provides a general framework and resource for comparative regulatory analysis in plants.
Utilizing three-terminal, interdigitated back contact Si solar cells as a platform to study the durability of photoelectrodes for solar fuel production
Demonstration of a new three-terminal semiconductor photoabsorber architecture for photoelectrochemical fuel production that enables protection of the semiconductor in the dark.
Interface diagnostics platform for thin-film solid-state batteries
Understanding the impedances of battery materials and their interfaces remains a major challenge, usually addressed by electrochemical impedance spectroscopy (EIS) where frequency-dependent complex impedance of full battery cells is measured and then modeled by a network of connected electrical elements. As conventionally applied, this approach produces ambiguity in that (1) multiple different network configurations may fit the data convincingly and (2) the method offers no direct association of the electrical elements with physical features of the battery. Here we present a new methodology that resolves both sources of ambiguity, enabled by expanding the experimental scope to directly inform the configuration of elements and their parameters in the network model. We demonstrate this methodology using thin film fabrication of solid state battery devices patterned by shadow masked sputter deposition, so that diagnostic devices corresponding to individual interface and material components can be fabricated simultaneously with full cell batteries. EIS models for the diagnostic devices can then be connected to form full cell networks whose topology matches the well-known physical configuration of the battery. When connected in this way, the full network model – made from connecting the diagnostic device EIS models – fits the full cell EIS data. For the case of a thin film solid state battery composed of amorphous silicon anode, lithium phosphorus oxynitride (LiPON) solid electrolyte, and lithium vanadium oxide (Li x V 2 O 5 ) cathode, we show that the approach allows us to identify ionic impedance/conductivity of the cathode/electrolyte as a limiting impedance and the anode/electrolyte interface cycling instability as a primary degradation factor.
Recent progress of MnBi 2 Te 4 epitaxial thin films as a platform for realising the quantum anomalous Hall effect
Since the first realisation of the quantum anomalous Hall effect (QAHE) in a dilute magnetic-doped topological insulator thin film in 2013, the quantisation temperature has been limited to less than 1 K due to magnetic disorder in dilute magnetic systems. With magnetic moments ordered into the crystal lattice, the intrinsic magnetic topological insulator MnBi 2 Te 4 has the potential to eliminate or significantly reduce magnetic disorder and improve the quantisation temperature. Surprisingly, to date, the QAHE has yet to be observed in molecular beam epitaxy (MBE)-grown MnBi 2 Te 4 thin films at zero magnetic field, and what leads to the difficulty in quantisation is still an active research area. Although bulk MnBi 2 Te 4 and exfoliated flakes have been well studied, revealing both the QAHE and axion insulator phases, experimental progress on MBE thin films has been slower. Furthermore, understanding how the breakdown of the QAHE occurs in MnBi 2 Te 4 thin films and finding solutions that will enable mass-produced millimetre-size QAHE devices operating at elevated temperatures are required. In this mini-review, we will summarise recent studies on the electronic and magnetic properties of MBE MnBi 2 Te 4 thin films and discuss mechanisms that could explain the failure of the QAHE from the aspects of defects, electronic structure, magnetic order, and consequences of their delicate interplay. Finally, we propose several strategies for realising the QAHE at elevated temperatures in MnBi 2 Te 4 thin films.
Accelerated sol–gel synthesis of nanoporous silica via integrated small angle X-ray scattering with an open-source automation platform
An open-hardware automated workflow for mesoporous colloidal silica synthesis is developed and applied to study a compositional parameter space.
Precision-controlled ultrafast electron microscope platforms. A case study: Multiple-order coherent phonon dynamics in 1T-TaSe2 probed at 50 fs–10 fm scales
We report on the first detailed beam tests attesting the fundamental principle behind the development of high-current-efficiency ultrafast electron microscope systems where a radio frequency (RF) cavity is incorporated as a condenser lens in the beam delivery system. To allow for the experiment to be carried out with a sufficient resolution to probe the performance at the emittance floor, a new cascade loop RF controller system is developed to reduce the RF noise floor. Temporal resolution at 50 fs in full-width-at-half-maximum and detection sensitivity better than 1% are demonstrated on exfoliated 1T-TaSe2 system under a moderate repetition rate. To benchmark the performance, multi-terahertz edge-mode coherent phonon excitation is employed as the standard candle. The high temporal resolution and the significant visibility to very low dynamical contrast in diffraction signals via high-precision phase-space manipulation give strong support to the working principle for the new high-brightness femtosecond electron microscope systems.
Development of a high performance MagLIF target platform using high aspect ratio coated liners and low-mix laser preheat
We report on a series of Magnetized Liner Inertial Fusion (MagLIF) experiments conducted on the Z pulsed power facility that utilized high aspect ratio (ratio of outer radius to wall thickness) liners with dielectric coatings and low-mix laser preheat configurations. The liners consisted of an aspect ratio of 10.6 beryllium tube coated with 75 μm of epoxy on the outside that have been shown to maintain a better implosion stability than uncoated beryllium and have demonstrated consistent stagnation performances in previous experiments [Ampleford et al., Phys. Plasmas 31, 022703 (2024)]. Two-dimensional HYDRA simulations were used to design three different “co-injection” laser configurations, whereby a second laser is used to provide an early prepulse before the main pulse, to reduce LEH foil mix while increasing the fuel density and coupled energy. The laser preheat energy for each configuration was constrained using dedicated laser experiments before being applied to the integrated MagLIF experiments on Z. The DD neutron yield for experiments using co-injection preheat configurations is found to increase with the specific preheat energy in line with simulations. The highest neutron yield achieved in this study of 1.1 × 10 13 matches the highest reported in a MagLIF experiment to date and is a factor 3.5 times higher than similar experiments using preheat with no phase plate smoothing. We attempt to assess the effects of mix and morphology to explain the improved performance; however, neither factor is found to be conclusive within the uncertainty of the measurements.
A platform for planar dynamic compression of crystalline hydrogen toward the terapascal regime
Here we describe a method for laser-driven planar compression of crystalline hydrogen that starts with a sample of solid para-hydrogen (even-valued rotational quantum number j) having an entropy of 0.06 k B /molecule at 10 K and 2 atm, with Boltzmann constant k B . Starting with this low-entropy state, the sample is compressed using a small initial shock (<0.2 GPa), followed by a pressure ramp that approaches isentropic loading as the sample is taken to hundreds of GPa. Planar loading allows for quantitative compression measurements; the objective of our low-entropy compression is to keep the sample cold enough to characterize crystalline hydrogen toward the terapascal range.