Search NASA⌕ Search

SEARCH · Search NASA

Results for “position”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Mostly positive implications of long-haul truck electrification

In this work, it is described how recently in the July 6, 2021 issue of Environmental Science & Technology, Tong et al. estimated health and climate impacts from large-scale long-haul truck electrification. The monetized damages range from a 47%–54% increase to a 77%–88% reduction. However, with adjustments to the marginal emission and static assumptions, impacts are found to be almost certainly positive, a 7%–94% reduction in damages.

33 ADVANCED PROPULSION SYSTEMS↗

The influence of temperature on area-specific impedance and capacity of Li-ion cells with nickel-containing positive electrodes

The temperature-dependent behaviors of five nickel-containing positive electrodes (NCA, NMC811, NMC622, NMC532, and NMC111) in lithium-ion batteries are investigated using an electrochemical protocol involving rate studies, mild aging (~100 cycles), and hybrid pulse power characterization (HPPC). Tests are conducted using coin-cells with graphite negative electrodes at -20 °C, 0 °C, 20 °C, and 40 °C. Three techniques are compared for determining the area-specific impedance (ASI): i) fits to the rate study average voltages, ii) fitting to the entire voltage curves using a regularization scheme, and iii) HPPC. When fit to an Arrhenius-type equation, all methods yield similar apparent activation energies (±2 kJ/mol) for the impedance, which range from -20 to -31 kJ/mol for the electrodes. Impedance growth increases with temperature but remains at less than 0.2% per cycle for most electrodes and temperatures. NCA and NMC811 are the exceptions, which yield 0.5% and 1.5% increases in ASI per cycle, respectively, at 40 °C. For cells with the same electrodes, the capacities are similar at 20 and 40 °C but reduce at lower temperatures, with up to a 52% reduction at -20 °C and 2C. The fade in energy of the cells during C/3 cycling is attributed to decreasing capacity as opposed to increasing ASI.

25 ENERGY STORAGE↗

Penetrant competition and plasticization in membranes: How negatives can be positives in natural gas sweetening

Membranes are attractive for upgrading natural gas; however, the gas permeation processes through membranes are challenging to control. The coexistence of condensable H 2 S and CO 2 typically causes membrane performance to decline under practical feed conditions, due to uncontrolled penetrant competition and undesired plasticization of the membrane polymer matrix. In this paper, we report a strategy to successfully transform these apparent negatives, i.e. plasticization and penetrant competition, into positives that boost the natural gas sweetening efficiency of membranes greatly. Our strategy is to disperse engineered metal organic framework (MOF) fillers into designed polymer matrices to form hybrid membranes, which promote the permeation of both H 2 S and CO 2 but hinder CH 4 permeation. Moreover, uniformly dispersed MOF fillers also significantly alter the plasticization responses of polymer matrices, enabling controlled plasticization benefits. Ultimately, we illustrate a highly tunable MOF-polymer hybrid membrane platform that meets the diverse natural gas sweetening requirements under aggressive conditions.

36 MATERIALS SCIENCE↗

Electro-optic sampling beam position monitor for relativistic electron beams

Here, an electro-optic sampling beam position monitor for installation at the SLAC National Accelerator Laboratory FACET-II facility is described. Simulations of the detector signal were performed using realistic electron beam current profiles, demonstrating that this single-shot, non-destructive, compact detector is capable of resolving the relative transverse offset and longitudinal separation of an ultra-relativistic, two-bunch electron beam to order 1 μm and 10 fs, respectively. A design study was performed to optimize the detector’s response to the ultra-relativistic two-bunch electron beam utilized in plasma wakefield accelerator experiments. In addition, the expected sensitivity to beam tilt is studied for typical electron beams used in free electron lasers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Characterization and alignment of a resonant cavity beam position monitor for the Compact LInear Collider (CLIC) project at CERN

Beam diagnostic devices are essential tools to sense the properties of the beam in particle accelerators. Beam Position Monitors (BPMs) are used to detect the transverse beam spatial coordinates. A large number of high-resolution resonant cavity BPMs, operating at 14GHz, are proposed to monitor the orbit of the two main beam linacs of the CLIC project. This paper discusses innovative calibration techniques on a dedicated test bench in the frame of the PACMAN project. The particular location of the electromagnetic center of the resonant cavity BPM is detected utilizing a stretched-wire measurement approach. Measurements, RF characterization and final fiducialization of the BPM electrical offset are treated with details. Initial studies through EM simulations of the cavity BPM are covered. The presented experimental results prove the feasibility of the alignment methodology with nanometric resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Position sensitive device technologies for particle physics

Here, I will give a brief overview of the use of position sensitive devices for particle physics. I will focus on silicon-based systems only. In addition to the depiction of a suite of recently designed, built, and operated detectors I will also introduce planned near term additions. I will conclude with a brief outlook regarding challenges for silicon detector applications for future colliders.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

3x3 array module of 8×8×32 mm 3 position-sensitive virtual frisch-grid CdZnTe detectors for imaging and spectroscopy of cosmic gamma-rays

Here, we evaluated the performance of the 3x3 array of 32-mm long position-sensitive virtual Frisch-grid (VFG) CdZnTe (CZT) detectors read out by the IDEAS GDS-100 data acquisition system. The array is a mechanically solid module designed for integration into a large effective area gamma-ray telescope proposed for imaging and spectroscopy of cosmic gamma-rays. The array employs the bar-shaped 8x8x32 mm 3 CZT crystals which recently became available from Redlen Technologies, Inc. and Kromek-eV Group PLC at affordable costs. The waveform sampling IDE3421 application-specific integrated circuit (ASIC), developed by the University of Michigan and IDEAS for CZT pixel detectors, was adapted to capture the signals from the array's VFG detectors. We showed good spectral performance of the Redlen detectors with an energy resolution of <1% FWHM at 662 keV and slightly poorer performance of the Kromek-eV detectors with a resolution of <2% measured at a reduced temperature of 13 °C. By testing the same detectors as single devices using hybrid charge-sensitive preamplifiers, we demonstrated improved energy resolutions at a normal temperature of ~25°C: <1% and 1.3-1.7%, respectively. However, the Kromek-eV detectors did not perform as well as the Redlen ones. We explained this by the space charge formation (polarization) decreasing the electric field and the electron drift times. The polarization was likely caused by the high injections of holes from the anode contacts. The absence of polarization in Redlen detectors suggested that the quality of the contacts might have played a role in this case.

47 OTHER INSTRUMENTATION↗

Dedicated beam position monitor pair for model-independent lattice characterization at NSLS-II

This paper reports recent lattice characterization results obtained at the National Synchrotron Light Source II (NSLS-II) storage ring, conducted without reliance on a lattice model. A pair of beam position monitors (BPMs) with bunch-by-bunch (B$\times$B) resolution, were recently installed in a section of the storage ring free of magnetic fields. The new BPM pair measured the beam, or bunch’s transverse Poincaré map precisely after the beam was excited. Linear one-turn-matrices (OTM) were then derived, and from these, the 4-dimensional coupled Twiss parameters were extracted at the locations of the BPM pair. By normalizing beam oscillation amplitudes with the Twiss parameters, the global action-variables were obtained. Additionally, these action-variables facilitated the measurement of the local Twiss parameters observed by other BPMs independent on lattice model. This method is general, and particularly useful in certain scenarios such as a round beam mode in a diffraction-limited light source ring. We applied it to assess both weakly and strongly coupled lattices at the NSLS-II ring. Through analysis of the strongly coupled lattice, the quadrupole tilt errors were estimated to be less than 400 μrad. Utilizing the BPMs’ B$\times$B resolution, for the first time we observed the variations of the linear lattice along a long bunch-train.

36 MATERIALS SCIENCE↗

Understanding interfacial chemistry of positive bias high-voltage degradation in photovoltaic modules

Photovoltaic module degradation from a high system voltage is a prevalent degradation mode in the field, where the enabling degradation mechanisms are inherently dependent on the voltage bias polarity of the installed system. In this study, the effects of positive bias on module performance are confirmed and the underlying chemical degradation processes are more thoroughly investigated to reveal different degradation pathways from those previously reported in negative bias studies. When cells are under +1000 V stress, crystalline silicon mini-modules with poly(ethylene-co-vinyl acetate) (EVA) encapsulant demonstrated a significant photocurrent loss due to EVA discoloration and delamination from increased chemical reactivity at the front-side EVA/cell metallization interface. Brown discoloration of the EVA encapsulant near the cell gridlines is linked to an electrochemical reaction at the Ag gridlines under hot and humid conditions (85 °C, 85% relative humidity). Chemical compositional analysis using X-ray photoelectron spectroscopy (XPS) confirmed that the discoloration is attributed to the formation of silver sulfide (Ag 2 S) and/or silver oxide (Ag 2 O) species at the EVA/Ag gridline interface. The subsequent migration of Ag ions from the cell gridlines into the bulk of the EVA was evident from XPS depth profiling and optical microscopy. However, the Ag signal was not detected at the EVA/glass interface, inferring limited ionic transport through the nominally 0.45 mm thick encapsulant. For the samples studied herein, the sulfur is believed by the process of elimination to come from the ambient air, diffusing into the module through the permeable polymer backsheet.

14 SOLAR ENERGY↗

Toward accurate measurement of electromagnetic field by retrieving and refining the center position of non-uniform diffraction disks in Lorentz 4D-STEM

Recent advancement in scanning transmission electron microscopy (STEM) allows the use of 4D-STEM, a technique that captures an electron diffraction pattern at each scan point in STEM, to measure electrostatic and magnetic potential and field in materials. However, accurate measurement, separation of the magnetic and electric signals, and removal of artifacts remain challenging, especially in the presence of complex non-uniform diffraction contrast within the disks. In this work, based on dynamic simulations of 4D-STEM patterns built upon superstructures consisting of millions of atoms to account for different sample thickness and edge geometries, we show how the shape and intensity distribution of the central disk are affected by multiple scattering. We propose a robust refinement procedure through iteration of the spin-sensitive peak position of the disk-center in the circular Hough transform filtered images from experimental Lorentz 4D-STEM dataset after minimizing the possible artifacts, such as those due to the change of thickness, dynamic scattering, and scanning process. We verify that caution must be taken as in practice the rigid-disk-shift model used to reconstruct induction maps can easily break down due to disk-protrusion when there exists a nonconstant phase gradient or thickness within the width of the probe. Through quantitative analysis and comparing experiment with calculation the effect of the non-spin-related intensity distribution inside the disk as well as that causes the disk shift due to the intensity-protrusion can be removed, and high-quality magnetic field mapping is possible.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transcription factor FOXC1 positively regulates SFRP1 expression in androgenetic alopecia

Androgenetic alopecia (AGA) is the most common type of hair loss dysfunction. Secreted frizzled related protein 1 (SFRP1) is found to be associated with hair loss, but its role in AGA and the regulation mechanism of its transcription level is unclear. The aim of our study is to explore the expression of SFRP1 in AGA samples and its transcriptional mechanism. Male frontal and occipital scalp hair follicles from AGA patients were collected, and human dermal papilla cells (DPCs) were isolated and cultured. SFRP1 gene was cloned and constructed into recombinant plasmids to perform dual-luciferase reporter assay. Transcription factor binding sites were predicted through the Jaspar website and further confirmed by the chromatin immunoprecipitation (ChIP) assay. Expression of genes in DPCs was determined by immunofluorescence (IF) staining, quantitative real-time PCR (qRT-PCR) and western blotting. Our findings showed that SFRP1 was highly expressed in DPCs of AGA patients. The core promoter region of SFRP1 was from −100 to +50 bp and was found to be positively regulated by forkhead box C1 (FOXC1), a transcription factor related to hair growth, both at mRNA and protein level in DPCs. Our study suggests that FOXC1 plays an important role in regulating SFRP1 transcription, which may provide new insights into the development of therapeutic strategies for the treatment of AGA.

60 APPLIED LIFE SCIENCES↗

Toggling Stereochemical Activity through Interstitial Positioning of Cations between 2D V 2 O 5 Double Layers

The 5/6s 2 lone-pair electrons of p-block cations in their lower oxidation states are a versatile electronic and geometric structure motif that can underpin lattice anharmonicity and often engender electronic and structural instabilities that underpin the function of active elements in nonlinear optics, thermochromics, thermoelectrics, neuromorphic computing, and photocatalysis. In contrast to periodic solids where lone-pair-bearing cations are part of the structural framework, installing lone-pair-bearing cations in the interstitial sites of intercalation hosts provides a means of a systematically modulating electronic structure through the choice of the group and the period of the inserted cation while preserving the overall framework connectivity. The extent of stereochemical activity and the energy positioning of lone-pair-derived mid-gap states depend on the cation identity, stoichiometry, and strength of anion hybridization. V 2 O 5 polymorphs are versatile insertion hosts that can accommodate a broad range of s-, p-, and d-block cations. However, the insertion of lone-pair-bearing cations remains largely underexplored. In this article, we examine the implications of varying the 6s 2 cations situated in interlayer sites between condensed [V 4 O 10 ] n double layers. Systematic modulations of lattice distortions, electronic structure, and magnetic ordering are observed with increasing strength of stereochemical activity from group 12 to group 14 cations. We compare and contrast p-block-layered M x V 2 O 5 (M = Hg, Tl, and Pb) compounds and map the significance of local off-centering arising from the stereochemical activity of lone-pair cations to the emergence of filled antibonding lone-pair 6s 2 –O 2p-hybridized mid-gap states mediated by second-order Jahn–Teller distortions. Crystallographic studies of cation coordination environments and the resulting modulation of V–V interactions have been used in conjunction with variable-energy hard X-ray photoelectron spectroscopy measurements, first-principles electronic structure calculations, and crystal orbital Hamilton population analyses to decipher the origins of stereochemical activity. Magnetic susceptibility measurements reveal antiferromagnetic signatures for all the three compounds. However, the differences in V–V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 160 and 260 K for Hg 0.5 V 2 O 5 and δ-Tl 0.5 V 2 O 5 , respectively, as compared to 7 K for δ-Pb 0.5 V 2 O 5 . In δ-Pb 0.5 V 2 O 5 , the strong stereochemical activity of electron lone pairs and the resulting electrostatic repulsions enforce superlattice ordering, which strongly modifies the electronic localization patterns along the [V 4 O 10 ] slabs, resulting in disrupted magnetic ordering and an anomalously low ordering temperature. The results demonstrate a versatile strategy for toggling the stereochemical activity of electron lone pairs to modify the electronic structure near the Fermi level and to mediate superexchange interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interplay between Electrostatic Properties of Molecular Adducts and Their Positions at Carbon Nanotubes

Formation of the sp 3 -defect due to covalent functionalization of a single-walled carbon nanotube (SWCNT) results in a new red-shifted emissive excitons. Here, using density functional theory, we study the impact of the intrinsic molecular dipole moments and the local charges induced by various molecular adducts on the energy and localization properties of the optically active defect-based exciton in a (10,5) SWCNT. The interplay of two effects plays a role in the localization of the exciton and, therefore, its red shift, but at different scales: The source of the leading order contribution is the defect conformation, resulting in the red shift of the defect-associated exciton with respect to the E 11 band of the pristine SWCNT on the order of ~100 meV, while the individual dipoles and polarization properties of molecular adducts lead to significantly smaller red shifts on the order of ~10 meV. While the species-dependent trends in defect-induced charges do not directly correlate to the exciton red shift, the charge at the sp 3 -defect exhibits a distinct behavior between ortho- and para-defect configurations and is relevant to the chemical reactivity of the defect position depending on the adduct type. Overall, our computational results may be helpful for diverse synthetic strategies to fine-tune emission of SWCNTs toward desired applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic-Scale Structure and Catalysis on Positively Charged Bimetallic Sites for Generation of H 2

In this paper, we report that a cationic bimetallic site consisting of one Pd and three Zn atoms (Pd 1 Zn 3 ) supported on ZnO (Pd 1 Zn 3 /ZnO) exhibits an extraordinarily high catalytic activity for the generation of H 2 through methanol partial oxidation (MPO) that is 2–3 orders of magnitude higher than that of a metallic Pd–Zn site on Pd–Zn nanoalloy (Pd–Zn/ZnO). Computational studies uncovered that the positively charged Pd atom of the subnanometer Pd 1 Zn 3 bimetallic site largely decreases the activation barrier for dehydrogenation of methanol as compared to a metallic Pd atom of Pd–Zn alloy, thus switching the rate-determining step of MPO from methanol dehydrogenation over a Pd–Zn alloy with high barrier to the O 2 dissociation step on a cationic Pd 1 Zn 3 site with a low barrier, which is supported by our kinetics studies. The significantly higher catalytic activity and selectivity for H 2 production over a cationic bimetallic site suggest a new approach to design bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Cp* Terphenylamido U(III) Iodide Complexes with a Substitutable Iodide Position to Generate Terminal U(III)–(κ 3 -BH 4 ) Complexes

Reaction of Cp*UI 2 (THF) 3 (Cp* = pentamethylcyclopentadienide; THF = tetrahydrofuran) with Na R3 TerNH ( R3 Ter = 2,6(2,4,6-R 3 C 6 H 2 ) 2 C 6 H 3 ; R = Me, Et, iPr) gave the U(III) monoiodide complexes Cp*( R3 TerNH)UI (R = Me, 1-Me; R = Et, 2-Et; R = iPr, 3-iPr). These complexes contain a functionalizable iodide position which reacts favorably with NaBH4 to give the κ 3 -borohydride complexes Cp*( R3 TerNH)U(H 3 BH) (R = Me, 4-Me; R = Et, 5-Et; R = iPr, 6-iPr). All compounds were experimentally characterized by SC-XRD, 1 H and 11 B NMR spectroscopy as well as UV–vis–NIR and FTIR analyses. DFT calculations corroborate the experimental findings, confirming the 5f 3 U(III) configuration across the entire series and revealing an increased U 5f orbital contribution in the borohydride derivatives. All compounds exhibit small but non-negligible U(III)–(η 6 -arene) δ-back-bonding interactions arising from the unpaired 5f electrons. Calculated steric parameters show progressively greater shielding of the U(III) center with increasing bulk of the terphenyl substituents from Me to iPr.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Examining Effects of Negative to Positive Capacity Ratio in Three-Electrode Lithium-Ion Cells with Layered Oxide Cathode and Si Anode

The negative to positive electrode capacity ratio (N:P) is crucial for lithium-ion cell design because it affects both energy density and long-term performance. Here, the effect of N:P ratio on electrochemical performance has been investigated for NMC 532 /Si cells containing a reference electrode. By monitoring individual electrode potentials, depths of lithiation/delithiation at the anode and cathode could be determined. The superior performance of the higher N:P cell, including greater reversibility, better capacity retention and lower impedance rise, can be attributed to smaller volume changes in the silicon particles during electrochemical cycling.

25 ENERGY STORAGE↗

Stability Enhancement in Na 0.67 Fe 0.2 Mn 0.8 O 2 Positive Electrodes via Spherical Coprecipitated Hydroxide Precursor Synthesis for Na-Ion Batteries

Mn/Fe-based layered transition metal oxides (LTMOs) are promising positive electrode materials for sodium-ion batteries (SIBs) due to their high abundance, low cost, and stable price fluctuations. At commercial scale, the fabrication of these materials commonly employs coprecipitation of hydroxide precursors, which allows for the scalable synthesis of uniform, dense particles with a tunable morphology. However, the common chelating agent (ammonia) forms unstable complexes with Fe 2+ ions, resulting in uncontrollable particle morphology and poor electrochemical properties. Here, in this study, three chelation strategies (no chelation, ammonia, oxalate) for Fe/Mn-based hydroxides are evaluated. It was found that oxalate chelation produced uniform, dense spherical hydroxide particles while particles via ammonia / no chelate routes exhibited no morphological control. The LTMOs synthesized from the oxalate-chelated hydroxide precursor formed uniform spherical particles, while the other two LTMOs showed greater variation in particle morphology. The oxalate-chelated LTMO electrode exhibited increased cycling stability due to reduced parasitic reactions with the electrolyte, as characterized by static leakage current measurements and electrochemical impedance spectroscopy.

25 ENERGY STORAGE↗

Positive Role of Fluorine Impurity in Recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials

Lithium-ion battery (LIB) recycling is considered as an important component to enable industry sustainability. A massive number of LIBs in portable electronics, electric vehicles, and grid storage will eventually end up as wastes, leading to serious economic and environmental problems. Hence, tremendous efforts have been made to improve the hydrometallurgical recycling process because it is the most promising option for handling end-of-life LIBs owing to its wide applicability, low cost, and high productivity. Despite these advantages, some extra elements (Al, Fe, C, F, and so forth) remain as impurities in the removal process and are retained in the solution, which is a great challenge to obtain high-quality cathode materials. In this work, the impacts caused by fluorine impurity on the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode are intensively investigated via hydrometallurgical coprecipitation for the first time. Our results show that up to 1 at. % fluorine impurity brings a positive influence on the recovered material due to a higher Ni 2+ ratio on the surface of cathode particles. In addition, the presence of fluoride ions during coprecipitation could lead to the formation of holes in cathode particles, which improves the rate capability and cyclability dramatically. Compared to the virgin material, the capacity of the NCM622 material with 0.2 at. % fluorine impurity is boosted by ~8% (167.7 mA h/g) with a remarkable capacity retention of 98.0% after 100 cycles at 0.33 C. Besides, the cathode with 0.2 at. % fluorine impurity shows a far better rate performance, especially at high rates (~7% increased at 5 C) than that of virgin. Furthermore, these results convince that a low concentration of fluorine impurity is desirable in the hydrometallurgical recycling process. More importantly, this study offers implications in the design of high-performance NCM622 cathode materials via coprecipitation production with ion doping in the near future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗