Search NASA⌕ Search

SEARCH · Search NASA

Results for “precursor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Interaction of copper impurity with radiation defects in silicon doped with boron

The spectrum of deep levels formed in boron-doped Czochralski-grown silicon single crystals as a result of interaction of radiation defects with copper impurity is studied. It is shown that, irrespective of the order of introduction of defects (both in the case of low-temperature copper diffusion into crystals preliminarily irradiated with electrons and in the case of irradiation of the samples contaminated with copper), the same set of deep levels appears. In addition to conventional radiation defects, three types of levels have been detected in the band gap of copper-containing crystals. These levels include the level E{sub v} + 0.49 eV (already mentioned in available publications), the level E{sub v} + 0.51 eV (previously not related to copper), and a level close to the donor level of a vacancy. Based on the analysis of concentration profiles, the interstitial carbonoxygen pair is excluded from possible precursors of the copper-containing center with level E{sub v} + 0.49 eV.

36 MATERIALS SCIENCE↗

Precursor Report of Data Needs and Recommended Practices for PV Plant Availability Operations and Maintenance Reporting.

Characterizing the factors that affect reliability of a photovoltaic (PV) power plant is an important aspect of optimal asset management. This document describes the many factors that affect operation and maintenance (O&M) of a PV plant, identifies the data necessary to quantify those factors, and describes how data might be used by O&M service providers and others in the PV industry. This document lays out data needs from perspectives of reliability, availability, and key performance indicators and is intended to be a precursor for standardizing terminology and data reporting, which will improve data sharing, analysis, and ultimately PV plant performance.

14 SOLAR ENERGY↗

Exact Solutions of the Precursor Film Equation

We find and analyze exact solutions to equations with logarithmic nonlinearity. To construct the soltuions, we use the classical group analysis methods, as well as the method of invariant manifolds and the Lagrangian coordinate method. Bibliography: 23 titles. Illustrations: 5 figures.

97 MATHEMATICS AND COMPUTING↗

Investigation of phase evolution of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) by in situ synchrotron high-temperature powder diffraction

In situ synchrotron X-ray powder diffraction was used to study the high-temperature phase evolution of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) precursors prepared via solid-state and sol–gel methods. After the precursors are heated to 1225 °C, the CCTO phase is the main phase observed in the calcined powder, with the presence of some minor impurities. Comparing the two precursors, we found that the onset temperature for the CCTO phase formation is 800 °C in the sol–gel precursor, lower than that in the solid-state precursor (875 °C). Intermediate phases were only observed in the sol–gel precursor. Both precursors are able to be calcined to sub-micrometric sized powders. Based on the synchrotron data along with differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA), the phase formation sequence and mechanism during calcination are proposed in this study. -- Graphical abstract: The in situ synchrotron HT-XRD patterns of CCTO sol–gel and solid-state precursor. Highlights: • Phase formation sequence/mechanism in two CCTO precursors has been established. • Formation temperature of CCTO via sol–gel method is lower than solid-state method. • Intermediate phases are only observed in the sol–gel precursor. • Both precursors are able to be calcined into sub-micrometric sized powders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ligand Exchange/Scrambling Study of Gold(I)-Phosphine Complexes in the Solid Phase by DESI-MS Analysis

Only a few analytical techniques are available for the characterization of mechanochemical synthetic reaction products. We demonstrate here that DESI-MS is a powerful technique for this purpose, combining the selectivity of MS-based assays with the simplicity and in situ analysis capability of ambient ionization methods. In this work, we report that auranofin, a gold-based drug, and its precursor triethylphosphine gold(I) chloride undergo a complex array of ligand exchange/scrambling reactions with thiol-containing amino acids in the solid state. The products were readily characterized by DESI-MS analysis from the solid-phase reaction, clearly exhibiting ligand exchange and scrambling, with independent confirmation by solid state {sup 13}C-NMR. The thioglucose and triethylphosphine moieties exchanged with cysteine and its derivatives, whereas the glutathione replaced 2,3,4,6-tetra-O-acetyl-β-1-D-glucopyranose only. It was concluded that ligand exchange and scrambling reactions can be carried out in the solid state, and some of the unique products reported in this study can be conveniently prepared through mechanochemical synthesis in good yields (> 98%), as demonstrated by synthesis of (L-cysteinato-S)-triethylphosphine gold(I) from triethylphosphine gold(I) chloride and L-cysteine. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of refluxing on the alkoxide-based sodium potassium niobate sol-gel system: Thermal and spectroscopic studies

A study on the effects of prolonged heating under reflux conditions of up to 70 h on alkoxides of sodium, potassium and niobium dissolved in 2-methoxyethanol for the synthesis of sols of composition Na{sub 0.5}K{sub 0.5}NbO{sub 3} (NKN) has been carried out using combined thermogravimetric-Fourier transform infrared spectroscopic analyses. Extended refluxing increases the homogeneity of the Na{sub 0.5}K{sub 0.5}NbO{sub 3} (NKN) system. Spectroscopic analyses on the non-refluxed and 70 h refluxed NKN gels reveal the existence of inorganic hydrated carbonates and bicarbonates, which we propose arise from the hydration and carbonation of the samples on standing in air. The X-ray diffraction patterns of these two types of gels show orthorhombic NKN phase evolutions at higher temperatures. -- Graphical abstract: Total organic evolution plots over time for NKN dried gels obtained under different refluxing times show different thermochemical behaviours and these were investigated by thermal and spectroscopic analysis tools to find a correlation between the extent of -M-O-M- chain link formation and the amount of solvent vapour (methoxyethanol) evolution. Display Omitted Research highlights: > Prolonged refluxing of sol-gel NKN precursor solutions improves final properties of an NKN system. > An NKN process thermo-chemistry with thermal and spectroscopic analysis tools was explored. > An FTIR of NKN gels reveals tendency of NKN systems for rehydration and recarbonation on standing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Helioseismology of pre-emerging active regions. III. Statistical analysis

The subsurface properties of active regions (ARs) prior to their appearance at the solar surface may shed light on the process of AR formation. Helioseismic holography has been applied to samples taken from two populations of regions on the Sun (pre-emergence and without emergence), each sample having over 100 members, that were selected to minimize systematic bias, as described in Paper I. Paper II showed that there are statistically significant signatures in the average helioseismic properties that precede the formation of an AR. This paper describes a more detailed analysis of the samples of pre-emergence regions and regions without emergence based on discriminant analysis. The property that is best able to distinguish the populations is found to be the surface magnetic field, even a day before the emergence time. However, after accounting for the correlations between the surface field and the quantities derived from helioseismology, there is still evidence of a helioseismic precursor to AR emergence that is present for at least a day prior to emergence, although the analysis presented cannot definitively determine the subsurface properties prior to emergence due to the small sample sizes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coupling Metabolic Source Isotopic Pair Labeling and Genome Wide Association for Metabolite and Gene Annotation in Plants (Final Technical Report)

In this project, we applied our labeling pipeline to Arabidopsis and sorghum by feeding tissues with isotopically labeled versions of commercially available amino acids to identify all metabolite features that incorporate the label. In sorghum, we fed five accessions, sampled across the diversity of sorghum, to identify the precursor-of-origin for metabolites that vary between accessions as well as those that may be missing from a single reference genotype. This provided us with precursor-of-origin annotation for thousands of unknown metabolites. We then used GWA to map genes responsible for the synthesis of precursor-of-origin classified metabolites. For sorghum leaf and root ducible metabolites, we performed untargeted metabolomics on leaf and root tissues from 300 diverse genotyped sorghum inbred lines. The amino acid precursor-of-origin metabolite library were then used to identify the corresponding metabolites in the GWA data sets and to identify novel gene-metabolite associations. Finally, we utilized existing and newly generated sequenced EMS mutants of sorghum to validate the predicted gene-metabolite relationships that our labelling analysis identified. In parallel, we conducted similar feeding experiments in Arabidopsis to categorize metabolites based on precursor-of-origin, identify those that vary across our existing Arabidopsis metabolite GWA dataset, and identify genes required for the synthesis of each metabolite. To provide an independent test of gene annotation and pathway involvement, we tested the GWA gene-metabolite associations in Arabidopsis by analyzing the metabolic phenotypes of gene knockouts. Genes of particular interest from both sorghum and Arabidopsis were studied in detail by directly measuring the activity of the corresponding enzymes following heterologous expression. In summary, this work classified as-yet-unknown amino acid-derived metabolites and identified genes involved in their production generated through “omics” technologies. This information was used to validate gene function and identify new metabolism in Arabidopsis and sorghum.

09 BIOMASS FUELS↗

Scalable, Physical Effects Measurable Microgrid for Cyber Resilience Analysis (SPEMMCRA)

The ability to advance state of the art automated protections for industrial control systems (ICS) has as a precursor in the ability to understand the tradeoff space. That is, to enable a cyber feedback loop in a control system environment you must first consider both the security mitigation available, the benefits and the impacts to the control system functionality when the mitigation is used. More damaging impacts could be precipitated that the mitigation was intended to rectify. This paper details networked ICS that controls a simulation of the frequency response represented with the swing equation. The microgrid loads and base generation can be balanced through the control of an emulated battery and power inverter. The simulated plant, which is implemented in Raspberry Pi computers, provides an inexpensive platform to realize the physical effects of cyber attacks to show the tradeoffs of available mitigatoins. This network design can include a commercial ICS controller to introduce real world implementation of feedback controls, and provides a scalable, physical effects measurable Microgrid for cyber resilience analysis (SPEMMCRA).

42 ENGINEERING↗

Easy, Fast, and Reproducible Quantification of Cholesterol and Other Lipids in Human Plasma by Combined High Resolution MSX and FTMS Analysis

Reliable, cost-effective, and gold-standard absolute quantification of non-esterified cholesterol in human plasma is of paramount importance in clinical lipidomics and for the monitoring of metabolic health. Here, we compared the performance of three mass spectrometric approaches available for direct detection and quantification of cholesterol in extracts of human plasma. These approaches are high resolution full scan Fourier transform mass spectrometry (FTMS) analysis, parallel reaction monitoring (PRM), and novel multiplexed MS/MS (MSX) technology, where fragments from selected precursor ions are detected simultaneously. Evaluating the performance of these approaches in terms of dynamic quantification range, linearity, and analytical precision showed that the MSX-based approach is superior to that of the FTMS and PRM-based approaches. To further show the efficacy of this approach, we devised a simple routine for extensive plasma lipidome characterization using only 8 μL of plasma, using a new commercially available ready-to-spike-in mixture with 14 synthetic lipid standards, and executing a single 6 min sample injection with combined MSX analysis for cholesterol quantification and FTMS analysis for quantification of sterol esters, glycerolipids, glycerophospholipids, and sphingolipids. Using this simple routine afforded reproducible and absolute quantification of 200 lipid species encompassing 13 lipid classes in human plasma samples. Notably, the analysis time of this procedure can be shortened for high throughput-oriented clinical lipidomics studies or extended with more advanced MS{sup ALL} technology (Almeida R. et al., J. Am. Soc. Mass Spectrom. 26, 133–148 [1]) to support in-depth structural elucidation of lipid molecules. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atmospheric Blocking and Other Large-Scale Precursor Patterns of Landfalling Atmospheric Rivers in the North Pacific: A CESM2 Study

Atmospheric rivers, narrow channels of strong winds carrying abundant moisture and spanning thousands of kilometers, often result in flooding. The broader weather patterns that precede atmospheric river formation can determine which regions the storms will impact, but our understanding of such processes remains insufficient. In this study, atmospheric river events in the North Pacific region are identified, and their precursor weather patterns are examined in observational data sets and within a global climate model. The analysis shows that when a large area of high pressure forms over Alaska and far eastern Siberia, the preferred path of storms crossing the North Pacific is diverted toward the south. The southward-shifted storms, some of which develop into atmospheric rivers, guide moist air toward the U.S. west coast and can produce extreme precipitation. The climate model performs reasonably well at representing atmospheric rivers and their associated precursor weather patterns. These results highlight important connections between atmospheric rivers and the large-scale weather patterns than can precede them by more than a week. Knowledge of such patterns has the potential to improve predictions of damaging wind and extreme precipitation events.

54 ENVIRONMENTAL SCIENCES↗

Influence of catalyst synthesis method on selective catalytic reduction (SCR) of NO by NH 3 with V 2 O 5 -WO 3 /TiO 2 catalysts

We compared the molecular structures, surface acidity and catalytic activity for NO/NH 3 /O 2 SCR of V 2 O 5 -WO 3 /TiO 2 catalysts for two different synthesis methods: co-precipitation of aqueous vanadium and tungsten oxide precursors with TiO(OH) 2 and by incipient wetness impregnation of the aqueous precursors on a reference crystalline TiO 2 support (P25; primarily anatase phase). Bulk analysis by XRD showed that co-precipitation results in small and/or poorly ordered TiO 2 (anatase) particles and that VO x and WO x do not form solid solutions with the bulk titania lattice. Surface analysis of the co-precipitated catalyst by High Sensitivity-Low Energy Ion Scattering (HS-LEIS) confirms that the VO x and WO x are surface segregated for the co-precipitated catalysts. In situ Raman and IR spectroscopy revealed that the vanadium and tungsten oxide components are present as surface mono-oxo O = VO 3 and O = WO 4 sites on the TiO 2 supports. Co-precipitation was shown for the first time to also form new mono-oxo surface VO 4 and WO 4 sites that appear to be anchored at surface defects of the TiO 2 support. IR analysis of chemisorbed ammonia showed the presence of both surface NH 3 * on Lewis acid sites and surface NH 4 +* on Brønsted acid sites. TPSR spectroscopy demonstrated that the specific SCR kinetics was controlled by the redox surface VO 4 species and that the surface kinetics was independent of TiO 2 synthesis method or presence of surface WO 5 sites. SCR reaction studies revealed that the surface WO5 sites possess minimal activity below ~325 °C and their primary function is to increase the adsorption capacity of ammonia. A relationship between the SCR activity and surface acidity was not found. The SCR reaction is controlled by the surface VO 4 sites that initiate the reaction at ~200 °C. The co-precipitated catalysts were always more active than the corresponding impregnated catalysts. Finally, we ascribe the higher activity of the co-precipitated catalysts to the presence of the new surface WO x sites associated surface defects on the TiO 2 support that increase the ammonia adsorption capacity.

36 MATERIALS SCIENCE↗

Polymer-iron oxide hybrid films for controlling electrokinetic properties

Electrokinetic phenomena at polymer-water interfaces are central to technologies for water purification, ion separations, and energy conversion, yet the ability to systematically control polymer surface charge and associated electrokinetic processes remains limited. Here, we demonstrate a simple liquid-phase infiltration (LPI) method to synthesize polymer–metal oxide hybrid films with controllable interfacial properties. Hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) brushes grafted to silicon substrates were infiltrated with iron nitrate from ethanolic solution, followed by low-temperature thermal treatment to convert the infiltrated precursor into iron oxide. Spectroscopic ellipsometry, X-ray photoelectron spectroscopy, and thermogravimetric analysis confirmed oxide incorporation and hybrid film formation without polymer degradation. Electrokinetic measurements reveal that the hybrid films acquire the electrokinetic properties of the infiltrated oxide, with concentration-dependent streaming potentials and surface conductivities closely matching those of pure iron oxide films. These results establish metal oxide infiltration as a scalable and low-cost strategy for controlling interfacial charge in polymer surfaces. The approach introduces new materials and design parameters for tailoring ion selectivity, transport, and energy conversion, with broad implications for the development of advanced membranes, electrokinetic harvesting devices, and polymer-supported oxide electrodes.

36 MATERIALS SCIENCE↗

Synthesis of zinc aluminate with high surface area by microwave hydrothermal method applied in the transesterification of soybean oil (biodiesel)

Highlights: • ZnAl{sub 2}O{sub 4} spinel was synthesized by the microwave hydrothermal method in only 15 or 30 min. • The powders show high specific surface area. • ZAT{sub b}15 showed activity of 52.22% for the conversion of soybean oil into biodiesel. - Abstract: Zinc aluminate is a material with high thermal stability and high mechanical strength that, owing to these properties, is used as a catalyst or support. In this work, zinc aluminate spinel was synthesized by the microwave hydrothermal method in only 15 or 30 min at a low temperature (150 °C) without templates, using only Al(NO{sub 3}){sub 3}·9H{sub 2}O, Zn(NO{sub 3}){sub 2}·6H{sub 2}O, and urea as precursors and applied in the transesterification of soybean oil. X-ray diffraction analysis showed that ZnAl{sub 2}O{sub 4} had a cubic structure without secondary phases. The nitrogen adsorption measurements (BET) revealed a high surface area (266.57 m{sup 2} g{sup −1}) for the nanopowder synthesized in 15 min. This powder showed activity of 52.22% for the catalytic conversion of soybean oil into biodiesel by transesterification.

36 MATERIALS SCIENCE↗

Organoammonium-Ion-based Perovskites Can Degrade to Pb 0 via Amine–Pb(II) Coordination

The degradation of alkylammonium Pb II halide perovskites, in the dark and upon irradiation near room temperature, involves coordinated amine as the dominant reducing agent to yield Pb o near room temperature, as determined by X-ray photoelectron spectroscopy (XPS). The reduction of Pb II first involves amine coordination, supported by 207 Pb nuclear magnetic resonance (NMR) analysis. It is shown that a Pb II –amide complex is the immediate precursor of Pb II reduction. Its oxidized counterpart, the imine, is formed and is characterized by NMR and gas chromatography–mass spectrometry. Here, the “redox” process requires a β-C–H bond of the alkylamine. Amine species devoid of this moiety do not similarly reduce Pb II to Pb o . The conversion of an alkylammonium moiety to the Pb II –amide is proposed to occur through a sequence of photoassisted proton-transfer reactions to a lead-coordinated ligand, which is substantiated through XPS-observed Pb II reduction in a family of lead bromide/iodide 2D perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of Volatile Organic Compounds as the Major Source of Formic Acid in a Mixed Forest Canopy

Formic acid (HCOOH) is among the most abundant carboxylic acids in the atmosphere, but its budget is poorly understood. We present eddy flux, vertical gradient, and soil chamber measurements from a mixed forest and apply the data to better constrain HCOOH source/sink pathways. While the cumulative above-canopy flux was downward, HCOOH exchange was bidirectional, with extended periods of net upward and downward flux. Net above-canopy fluxes were mostly upward during warmer/drier periods. The implied gross canopy HCOOH source corresponds to 3% and 38% of observed isoprene and monoterpene carbon emissions and is 15× underestimated in a state-of-science atmospheric model (GEOS-Chem). Gradient and soil chamber measurements identify the canopy layer as the controlling source of HCOOH or its precursors to the forest environment; below-canopy sources were minor. A correlation analysis using an ensemble of marker volatile organic compounds suggests that secondary formation, not direct emission, is the major source driving ambient HCOOH.

58 GEOSCIENCES↗