SEARCH · Search NASA

Results for “proximity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Optically Active Spin Defects in Few-Layer Thick Hexagonal Boron Nitride

Optically active spin defects in hexagonal boron nitride (hBN) are promising quantum systems for the design of two-dimensional quantum sensing units offering optimal proximity to the sample being probed. In this Letter, we first demonstrate that the electron spin resonance frequencies of boron vacancy centers ($V$$^{–}_{B}$) can be detected optically in the limit of few-atomic-layer thick hBN flakes despite the nanoscale proximity of the crystal surface that often leads to a degradation of the stability of solid-state spin defects. We then analyze the variations of the electronic spin properties of $V$$^{–}_{B}$ centers with the hBN thickness with a focus on (i) the zero-field splitting parameters, (ii) the optically induced spin polarization rate and (iii) the longitudinal spin relaxation time. Furthermore, this Letter provides important insights into the properties of $V$$^{–}_{B}$ centers embedded in ultrathin hBN flakes, which are valuable for future developments of foil-based quantum sensing technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Anisotropic multiband superconductivity in 2 M − WS 2 probed by controlled disorder

The intrinsically superconducting Dirac semimetal 2 M − WS 2 is a promising candidate for realizing proximity-induced topological superconductivity in its protected surface states. A precise characterization of the bulk superconducting state is essential to understand the nature of surface superconductivity in the system. Here, we report a detailed experimental study of the temperature-dependent London penetration depth, λ ( T ) , the upper critical field, H c 2 ( T ) , and the effects of nonmagnetic disorder on these quantities, as well as on the superconducting transition temperature T c in single crystals of 2 M − WS 2 . We observe a power-law variation of λ ( T ) ∝ T 3 at temperatures below 0.35 T c . Nonmagnetic pointlike disorder induced by 2.5 MeV electron irradiation at various doses results in a significant suppression of T c . These observations are markedly different from expectations for a fully gapped isotropic s − wave superconductor. Together with the substantial increase of slope, d H c 2 / d T | T = T c , with increasing disorder, our results suggest a strongly anisotropic s + + multiband superconducting state. These results have direct consequences for the expected proximity-induced superconductivity of the topological surface states. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Interface magnetism and anomalous Hall effect in La 0.7 ⁢Sr 0.3⁢ Mn⁢O 3 /SrIr⁢O 3 bilayers

Epitaxial interfaces combining 3d and 5d transition metal oxides are a fertile playground to examine the interplay between topology and electron correlations. In this work, we explore magnetism and transport of bilayers combining ferromagnetic La 0.7⁢ Sr 0.3⁢ Mn⁢O 3 and the strong spin-orbit coupling material SrIr⁢O 3 . We have found an interfacial magnetic proximity effect driving an intrinsic contribution to the anomalous Hall effect of topological origin. The interfacial proximity interaction is enabled by the Mn-O-Ir bonding reconstruction and depends on layer sequence. While bilayers with the La 0.7⁢ Sr 0.3 ⁢Mn⁢O 3 on top featuring a robust Mn magnetism at the interface show the intrinsic AHE contribution, it is absent in bilayers with the inverted layer sequence (SrIr⁢O 3 layer on top) showing strongly suppressed magnetism at the interface. These results illustrate the leading role of interfacial atomic reconstructions on the interplay between topology and correlations at 3d/5d oxide interfaces. This finding may be of interest in future oxide topological spintronics and spin-orbitronics.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Unveiling in-gap states and Majorana zero modes in superconductor-topological insulator bilayer model

Interfaces between topological insulators and superconductors (SCs) are promising platforms for realizing Majorana zero modes (MZMs) via the superconducting proximity effect. We introduce a bilayer model consisting of the surface states of a three-dimensional topological insulator (3DTI) coupled to an 𝑠-wave superconductor and systematically study the role of interlayer tunneling strength (𝑡⊥) motivated by the recent growth of the Fe⁡(Te,Se)/Bi 2 ⁢Te 3 heterostructure. We find that increasing 𝑡⊥ shifts the proximity-induced (PrI) gap minimum away from the Γ point, giving rise to momentum-selective interference patterns that manifest as spatial oscillations in the in-gap states. We introduce an antidot with a magnetic vortex in the model and investigate the resulting in-gap states, including MZMs and Caroli–de Gennes–Matricon (CdGM) modes. With increasing hybridization strength, the energy separation between MZMs and CdGM states increases, enhancing the isolation of MZMs. Importantly, in the strong hybridization limit, the leading CdGM separation remains large in spite of the decrease in the PrI gap. Spin- and spatially resolved wavefunction analysis reveals angular momentum asymmetries absent in conventional 𝑠-wave systems. A direct comparison with a standalone 𝑠-wave superconductor confirms the emergence of distinct 𝑝-wave-like features in the bilayer geometry. Our results provide experimentally relevant predictions for tuning the stability of MZMs and their differentiation from the CdGM modes in SC-3DTI heterostructures and offer a theoretical framework for probing unconventional superconductivity in engineered topological systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Decentralized Low-Rank State Estimation for Power Distribution Systems

This article considers the low-observability state estimation problem in power distribution networks and develops a decentralized state estimation algorithm leveraging the matrix completion methodology. Matrix completion has been shown to be an effective technique in state estimation that exploits the low dimensionality of the power system measurements to recover missing information. This technique can utilize an approximate (linear) load flow model, or it can be used with no physical models in a network where no information about the topology or line admittance is available. The direct application of matrix completion algorithms requires solving a semi-definite programming (SDP) problem, which becomes computationally challenging for large networks. We therefore develop a decentralized algorithm that capitalizes on the popular proximal alternating direction method of multipliers (proximal ADMM). The method allows us to distribute the computation among different areas of the network, leading to a scalable algorithm. By doing all computations at individual control areas and only communicating with neighboring areas, the algorithm eliminates the need for data to be sent to a central processing unit and thus increases efficiency and contributes to the goal of autonomous control of distribution networks. We illustrate the advantages of the proposed algorithm numerically using standard IEEE test cases.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2025

Illuminated nights accelerate the migration‐linked phenology in a passerine finch redheaded bunting

Abstract The excessive use of artificial light is altering the natural light–dark cycles, consequently impacting animal behavior and physiology. Dim light at night (dLAN) can disrupt migratory patterns, alter hormone levels, and impact breeding success in birds. The present research aims to address the effects of dLAN on the metabolic and reproductive tissues of migratory redheaded bunting ( Emberiza bruniceps ). For this, buntings under short winter‐like days (10L:14D) were exposed to either dark nights ( D = 0.00014 W/m 2 ) or dLAN ( D = 0.058 W/m 2 ), and their locomotor activity, body mass, fat score, food intake, testicular volume, and plasma testosterone levels were measured. The histological architecture of the muscle, intestine, testis, and liver tissues was assessed. Birds exposed to dark nights confined their activity to the daytime only, whereas the dLAN group showed nocturnal activity and initiated Zugunruhe (nighttime restlessness). The body mass, food intake, fat score, and testicular volume significantly increased under dLAN. Histomorphometry revealed increased muscle width, epithelium thickness, and lumen diameter in the testis, proximal and distal muscularis thickness in the intestine, hepatic lipid droplet size, and decreased proximal villi length and intestinal diameter under dLAN. Further, plasma testosterone levels also increased under dLAN. Our results suggest that dLAN can induce migration‐linked phenotypes even under non‐stimulatory short days leading to mistimed seasonal activities.

Tiwari, Jyoti [Department of Zoology University of↗

DOE OSTI2020

Absence of evidence for chiral Majorana modes in quantum anomalous Hall-superconductor devices

A quantum anomalous Hall (QAH) insulator coupled to an s-wave superconductor is predicted to harbor chiral Majorana modes. A recent experiment interprets the half-quantized two-terminal conductance plateau as evidence for these modes in a millimeter-size QAH-niobium hybrid device. However, non-Majorana mechanisms can also generate similar signatures, especially in disordered samples. Here, we studied similar hybrid devices with a well-controlled and transparent interface between the superconductor and the QAH insulator. When the devices are in the QAH state with well-aligned magnetization, the two-terminal conductance is always half-quantized. Our experiment provides a comprehensive understanding of the superconducting proximity effect observed in QAH-superconductor hybrid devices and shows that the half-quantized conductance plateau is unlikely to be induced by chiral Majorana fermions in samples with a highly transparent interface.

Science & Technology - Other Topics↗

DOE OSTI2025

Pair wave function symmetry in UTe2 from zero-energy surface state visualization

Although nodal spin-triplet topological superconductivity appears probable in uranium ditelluride (UTe 2 ), its superconductive order parameter Δ k remains unestablished. In theory, a distinctive identifier would be the existence of a superconductive topological surface band, which could facilitate zero-energy Andreev tunneling to an s-wave superconductor and also distinguish a chiral from a nonchiral Δ k through enhanced s-wave proximity. In this study, we used s-wave superconductive scan tips and detected intense zero-energy Andreev conductance at the UTe 2 (0-11) termination surface. Imaging revealed subgap quasiparticle scattering interference signatures with a-axis orientation. The observed zero-energy Andreev peak splitting with enhanced s-wave proximity signifies that Δ k of UTe 2 is a nonchiral state: B 1u , B 2u , or B 3u . However, if the quasiparticle scattering along the a axis is internodal, then a nonchiral B 3u state is the most consistent for UTe 2 .

Gu, Qiangqiang [Cornell Univ., Ithaca, NY (United ↗

DOE OSTI2025

A dynamic protein interactome drives energy conservation and electron flux in Thermococcus kodakarensis

ABSTRACT Life is supported by energy gains fueled by catabolism of a wide range of substrates, each reliant on the selective partitioning of electrons through redox ( red uction and ox idation) reactions. Electron flux through tunable and regulated protein interactions provides dynamic routes for energy conservation, but how electron flux is regulated in vivo , particularly for archaeal metabolisms that support rapid growth at the thermodynamic limits of life, is poorly understood. Identification of bona fide in vivo protein assemblies and how such assemblies dictate the totality of electron flux is critical to our understanding of the regulation imposed on metabolism, energy production, and energy conservation. Here, 25 key proteins in central metabolic redox pathways in the model, genetically accessible, hyperthermophilic archaeon Thermococcus kodakarensis , were purified to reveal an extensive, dynamic, and tightly interconnected network of protein interactions that responds to environmental cues (such as the availability of various reductive sinks) to direct electron flux to maximize energetic gains. Interactions connecting disparate functions suggest many catabolic and anabolic activities occur in spatial proximity in vivo , and while protein complexes have been historically defined under optimal conditions, many of these complexes appear to maintain alternative partnerships in changing conditions. The totality of the results obtained redefines our understanding of in vivo assemblies driving ancient metabolic strategies supporting the growth of modern Archaea. IMPORTANCE Given the potential for rational genetic manipulations of biofuel- and biotech-promising archaea to yield transformative results for major markets, it is a priority to define how the metabolisms of such species are controlled, at least in part, by in vivo protein assemblies, and from such, define routes of energy flux that can be most efficiently altered toward biofuel or biotechnological gains. Proteinaceous electron carriers (PECs, such as ferredoxins) offer the potential for specific protein–protein interactions to coordinate selective reductive flow. Employing the model, genetically accessible, hyperthermophilic archaeon, Thermococcus kodakarensis , we establish the metabolic protein interactome of 25 key redox proteins, revealing that each redox active protein has a dynamic partnership profile, suggesting catabolic and anabolic activities may occur in concert and in temporal and spatial proximity in vivo . These results reveal critical importance in evaluating the newly identified partnerships and their role and utility in providing regulated redox flux in T. kodakarensis .

Williams, Sere A. (ORCID:0000000235509590)↗

DOE OSTI2024

The military gear microbiome: risk factors surrounding the warfighter

ABSTRACT Combat extremity wounds are highly susceptible to contamination from surrounding environmental material. This bioburden could be partially transferred from materials in immediate proximity to the wound, including fragments of the uniform and gear. However, the assessment of the microbial bioburden present on military gear during operational conditions of deployment or training is relatively unexplored. Opportunistic pathogens that can survive on gear represent risk factors for infection following injury, especially following combat blasts, where fibers and other materials are embedded in wounded tissue. We utilized 16S rRNA sequencing to assess the microbiome composition of different military gear types (boot, trouser, coat, and canteen) from two operational environments (training in Hawai’i and deployed in Indonesia) across time (days 0 and 14). We found that microbiome diversity, stability, and composition were dependent on gear type, training location, and sampling timepoint. At day 14, species diversity was significantly higher in Hawai’i samples compared to Indonesia samples for boot, coat, and trouser swabs. In addition, we observed the presence of potential microbial risk factors, as opportunistic pathogenic species, such as Acinetobacter , Pseudomonas, and Staphylococcus , were found to be present in all sample types and in both study sites. These study outcomes will be used to guide the design of antimicrobial materials and uniforms and for infection control efforts following combat blasts and other injuries, thereby improving treatment guidance during military training and deployment. IMPORTANCE Combat extremity wounds are vulnerable to contamination from environments of proximity to the warfighter, leading to potential detrimental outcomes such as infection and delayed wound healing. Therefore, microbial surveillance of such environments is necessary to aid the advancement of military safety and preparedness through clinical diagnostics, treatment protocols, and uniform material design.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Tornadoes in Southeast South America: Mesoscale to Planetary-Scale Environments

Abstract A multiscale analysis of the environment supporting tornadoes in southeast South America (SESA) was conducted based on a self-constructed database of 74 reports. Composites of environmental and convective parameters from ERA5 were generated relative to tornado events. The distribution of the reported tornadoes maximizes over the Argentine plains, while events are rare close to the Andes and south of Sierras de Córdoba. Events are relatively common in all seasons except in winter. Proximity environment evolution shows enhanced instability, deep-layer vertical wind shear, storm-relative helicity, reduced convective inhibition, and a lowered lifting condensation level before or during the development of tornadic storms in SESA. No consistent signal in low-level wind shear is seen during tornado occurrence. However, a curved hodograph with counterclockwise rotation is present. The Significant Tornado Parameter (STP) is also maximized prior to tornadogenesis, most strongly associated with enhanced CAPE. Differences in the convective environment between tornadoes in SESA and the U.S. Great Plains are discussed. On the synoptic scale, tornado events are associated with a strong anomalous trough crossing the southern Andes that triggers lee cyclogenesis, subsequently enhancing the South American low-level jet (SALLJ) that increases moisture advection to support deep convection. This synoptic trough also enhances vertical shear that, along with enhanced instability, sustains organized convection capable of producing tornadic storms. At planetary scales, the tornadic environment is modulated by Rossby wave trains that appear to be forced by convection near northern Australia. Madden–Julian oscillation phase 3 preferentially occurs 1–2 weeks ahead of tornado occurrence. Significance Statement The main goal of this study is to describe what atmospheric conditions (from local to global scales) are present prior to and during tornadic storms impacting southeast South America (SESA). Increasing potential for deep convection, wind shear, and potential for rotating updrafts, as well as reducing convective inhibition and cloud-base height, are predominant a few hours before and during the events in connection to low-level northerly winds enhancing moisture transport to the region. Remote convective activity near northern Australia appears to influence large-scale atmospheric circulation that subsequently triggers convective storms supporting tornadogenesis 1–2 weeks later in SESA. Our findings highlight the importance of accounting for atmospheric processes occurring at different scales to understand and predict tornado occurrences.

Meteorology & Atmospheric Sciences↗

DOE OSTI2020

A terminology for in situ visualization and analysis systems

The term "in situ processing" has evolved over the last decade to mean both a specific strategy for visualizing and analyzing data and an umbrella term for a processing paradigm. The resulting confusion makes it difficult for visualization and analysis scientists to communicate with each other and with their stakeholders. To address this problem, a group of over 50 experts convened with the goal of standardizing terminology. This paper summarizes their findings and proposes a new terminology for describing in situ systems. An important finding from this group was that in situ systems are best described via multiple, distinct axes: integration type, proximity, access, division of execution, operation controls, and output type. This paper discusses these axes, evaluates existing systems within the axes, and explores how currently used terms relate to the axes.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Data for Photoenzymatic Stereoablative Enantioconvergence of γ-chiral Oximes via Hydrogen Atom Transfer

Producing enantioenriched molecules from racemic mixtures is essential for manufacturing. Traditional methods such as resolution, deracemization and enantioconvergent catalysis primarily involve separating or converting enantiomers without altering their structures, or functionalization of stereocentres at or proximal to functional groups. However, there are challenges in enantioselectively forging C–H bonds that are remote from functional groups via hydrogen atom transfer (HAT) with these methods. Here we introduce a strategy for the photoenzymatic stereoablative enantioconvergence of γ-chiral oximes using repurposed flavin-dependent ene-reductases. A photoinduced single-electron reduction of the γ-chiral oxime by an ene-reductase generates an iminyl radical, which then undergoes stereoablative 1,5-HAT at the γ-stereocentre. Subsequent chiral reconstruction through enzymatic HAT and spontaneous imine hydrolysis yields the γ-chiral ketone with high enantioselectivity. This work provides a robust method for remote stereoablative enantioconvergent HAT and broadens the synthetic utility of photobiocatalysis.

Bioproducts↗

DOE OSTI2023

Evaluation of 6-OxP-CD, an Oxime-based cyclodextrin as a viable medical countermeasure against nerve agent poisoning: Experimental and molecular dynamic simulation studies on its inclusion complexes with cyclosarin, soman and VX

The ability of the cyclodextrin-oxime construct 6-OxP-CD to bind and degrade the nerve agents Cyclosarin (GF), Soman (GD) and S -[2-[Di(propan-2-yl)amino]ethyl] O -ethyl methylphosphonothioate (VX) has been studied using 31 P-nuclear magnetic resonance (NMR) under physiological conditions. While 6-OxP-CD was found to degrade GF instantaneously under these conditions, it was found to form an inclusion complex with GD and significantly improve its degradation (t 1/2 ~ 2 hrs) relative over background (t 1/2 ~ 22 hrs). Consequently, effective formation of the 6-OxP-CD:GD inclusion complex results in the immediate neutralization of GD and thus preventing it from inhibiting its biological target. In contrast, NMR experiments did not find evidence for an inclusion complex between 6-OxP-CD and VX, and the agent’s degradation profile was identical to that of background degradation (t 1/2 ~ 24 hrs). As a complement to this experimental work, molecular dynamics (MD) simulations coupled with Molecular Mechanics-Generalized Born Surface Area (MM-GBSA) calculations have been applied to the study of inclusion complexes between 6-OxP-CD and the three nerve agents. These studies provide data that informs the understanding of the different degradative interactions exhibited by 6-OxP-CD with each nerve agent as it is introduced in the CD cavity in two different orientations (up and down). For its complex with GF, it was found that the oxime in 6-OxP-CD lies in very close proximity (P GF …O Oxime ~ 4–5 Å) to the phosphorus center of GF in the ‘down GF ’ orientation for most of the simulation accurately describing the ability of 6-OxP-CD to degrade this nerve agent rapidly and efficiently. Further computational studies involving the center of masses (COMs) for both components (GF and 6-OxP-CD) also provided some insight on the nature of this inclusion complex. Distances between the COMs (ΔCOM) lie closer in space in the ‘down GF ’ orientation than in the ‘up GF ’ orientation; a correlation that seems to hold true not only for GF but also for its congener, GD. In the case of GD, calculations for the ‘down GD ’ orientation showed that the oxime functional group in 6-OxP-CD although lying in close proximity (P GD …O Oxime ~ 4–5 Å) to the phosphorus center of the nerve agent for most of the simulation, adopts another stable conformation that increase this distance to ~ 12–14 Å, thus explaining the ability of 6-OxP-CD to bind and degrade GD but with less efficiency as observed experimentally (t 1/2 ~ 4 hr. vs. immediate). Lastly, studies on the VX:6-OxP-CD system demonstrated that VX does not form a stable inclusion complex with the oxime-bearing cyclodextrin and as such does not interact in a way that is conducive to an accelerated degradation scenario. Collectively, these studies serve as a basic platform from which the development of new cyclodextrin scaffolds based on 6-OxP-CD can be designed in the development of medical countermeasures against these highly toxic chemical warfare agents.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

More Than 40 yr of Potentially Induced Seismicity Close to the San Andreas Fault in San Ardo, Central California

Evidence for fluid–injection–induced seismicity is rare in California hydrocarbon basins, despite widespread injection close to seismically active faults. We investigate a potential case of injection–induced earthquakes associated with San Ardo oilfield operations that began in the early 1950s. The largest potentially induced events occurred in 1955 (M L 5.2) and 1985 (M w 4.5) within ~6 km from the oilfield. We analyze Synthetic Aperture Radar interferometric images acquired by Sentinel–1A/B satellites between 2016 and 2020 and find surface deformation of up to 1.5 cm/yr, indicating pressure–imbalance in parts of the oilfield. Fluid injection in San Ardo is concentrated within highly permeable rocks directly above the granitic basement at a depth of ~800 m. Seismicity predominantly occurs along basement faults at 6–13 km depths. Seismicity and wastewater disposal wells are spatially correlated to the north of the oilfield. Temporal correlations are observed over more than 40 yr with correlation coefficients of up to 0.71 for seismicity within a 24 km distance from the oilfield. Such large distances have not previously been observed in California but are similar to the large spatial footprint of injection in Oklahoma. Furthermore, the San Ardo seismicity shows anomalous clustering with earthquakes consistently occurring at close spatial proximity but long interevent times. Similar clustering has previously been reported in California geothermal fields and may be indicative of seismicity driven by long–term, spatially persistent external forcing.

58 GEOSCIENCES↗

DOE OSTI2022

Basin Management of Geologic CO2 Storage: Effect of Well Spacing on CO2 Plume and Pressure Interference

This is the conference paper accompanying an oral presentation made at the Society of Petroleum Engineers (SPE) Western Regional Meeting (WRM) held in Bakersfield, California, April 26–28, 2022. The paper provides the results of a basin-scale CO2 storage modeling project investigating subsurface pressure interference among CO2 injection wells located in proximity to each other.

Wijaya, Nur↗

DOE OSTI2021

Wyoming CarbonSAFE: Advancing Commercialization of Low-Carbon Energy Technologies in Fossil-Rich Wyoming

Wyoming’s Powder River Basin (PRB) is the most prolific coal producer and exporter in the United States and the State of Wyoming’s largest oil-producing basin. In addition to being a leading energy producer, the PRB is the site of research programs whose aim is to develop and integrate low-carbon technologies into existing fossil fuel energy industries. Much of the PRB’s low-carbon research is focused around Dry Fork Station (DFS), which is the newest coal-fired power station in the western US. Currently, DFS hosts five carbon capture projects, including pilot-scale capture projects that utilize different capture technologies and a full front-end engineering and design (FEED) study, a commercial CO 2 pipeline for nearby CO 2 -enhanced oil recovery industry, and is also co-located with the Wyoming Integrated Test Center, which is a host facility for unconventional carbon utilization research (i.e. flue gas carbon-to-products innovations). DFS is also the host site for the Wyoming CarbonSAFE project. Wyoming CarbonSAFE, funded by the Department of Energy/National Energy Technology Laboratory, is a multi-phased program (currently in Phase II) whose core objective is developing and validating storage sites within a complex capable of storing 50 million metric tonnes of CO 2 over a 30 year project period using carbon capture, utilization and storage (CCUS). This paper will provide an overview of the project to-date, showing that CarbonSAFE goals are achievable with respect to geologic, environmental, regulatory, CO 2 source and economic conditions, and why the State of Wyoming offers one of the more favorable environments to advance the commercialization studies. In 2019, the project team designed and completed a ~10,000 foot stratigraphic test well just south of DFS. From this well, the team collected over 600 feet of core, fluid samples from target injection zones, and a full petrophysical log suite. In addition, legacy 2D seismic lines were acquired and a 3D seismic survey was acquired in the fall of 2020. The objective of these field activities has been to identify and characterize target storage reservoirs and associated caprock. This complex has several reservoirs that could meet commercial injection goals, and over 4000 feet of associated caprock. Simulations of site performance suggest that stacked injection provides the most effective storage strategy, and would necessitate several sites within the greater complex to meet final project injection goals. Other work within this project includes the development of a business-case around proximal fields with CO 2 -enhanced oil recovery potential and existing tax credits, assessment of regulatory conditions, including pore space ownership and Class VI injection well permitting requirements, implementation of a robust public outreach Electronic copy available at: https://ssrn.com/abstract=3821220 GHGT-15 McLaughlin 2 program, and surface site characterization activities that have focused on environmental factors. In the PRB and at DFS, the State of Wyoming and other entities have made carbon management a priority of its future energy industry by providing a regulatory and business framework that is favorable to advancing these technologies. These endeavors will become more realistic with the successful implementation of Wyoming CarbonSAFE, and its ability to secure and validate commercial-scale CCUS at the center of Wyoming’s premier low-carbon research efforts.

McLaughlin, Fred↗

DOE OSTI2020

Vortex Matter in Confined Superconductors and Mesoscopic Hybrid Heterostructures. Final report

This program studied the fundamental features that underlie the behavior of hybrid ferromagnet/superconductor heterostructures both in the regime of magnetic coupling and proximity effect. In ferromagnet/superconductor hybrid structures, the source of superconducting correlations and ferromagnetism are spatially separated. Therefore, the interplay between ferromagnetism and superconductivity results in physical effects that are not easily observed in bulk superconductors and allows to tune the local superconducting and vortex properties, realizing, thus, a new class of materials. In the case of proximity effect the ferromagnet and the superconductor are in contact and leakage of superconducting pairs is allowed into the ferromagnetic layer. Typically, the decay length for the superconducting pair correlations in the ferromagnet is of the order of one nanometer due to the typically large ferromagnetic exchange field. However, a suitable magnetic structure in the ferromagnetic material can be used to align the spins of the superconducting pairs allowing much longer penetration of superconductivity in the magnetic material. These superconducting pairs with aligned spins can carry spin and provide the basis for superconducting spintronics devices. In the case of magnetic coupling the effect of a spatial inhomogeneous stray field produced by the ferromagnet substantially modifies the nucleation of the order parameter in the superconducting layer and can lead to a significant change in the local superconducting properties. Therefore, magnetically coupled planar ferromagnet-superconductor hybrid structures offer new avenues for manipulation of the superconductivity at the nanoscale and convenient means to control vortex dynamics.

36 MATERIALS SCIENCE↗