Results for “radius equation” — Page 15

NASA NTRS1994

Two-dimensional hydrodynamical simulations of wind-compressed disks around rapidly rotating B stars

We use a two-dimensional piecewise parabolic method (PPM) code to simulate numerically the hydrodynamics of a radiation-driven stellar wind from a rapidly rotating Be star. The results generally confirm predictions of the semianalytic 'wind-compressed disk' model recently proposed by Bjorkman and Cassinelli to explain the circumstellar disks inferred observationally to exist around such rapidly rotating stars. However, this numerical simulation is able to incorporate several important effects not accounted for in the simple model, including a dynamical treatment of the outward radiative driving and gas pressure, as well as a rotationally distorted, oblate stellar surface. This enables us to model quantitatively the compressed wind and shock that forms the equatorial disk. The simulation results thus do differ in several important details from the simple method, showing, for example, an inner disk inflow not possible in the heuristic approach of assuming a fixed outward velocity law. There is also no evidence for the predicted detachment of the disk that arises in the fixed outflow picture. The peak equatorward velocity in the dynamical models is furthermore about a factor of 2 smaller than the lytically predicted value of approximately 50% of the stellar equatorial rotation speed. As a result, the dynamical disks are somewhat weaker than predicted, with a wider opening angle, lower disk/pole density ratio, and smaller shock velocity jump. The principal cause of these latter differences appears to be an artificially strong equatorward drift of the subsonic outflow in the original analytic model. Much better agreement with the dynamical results can be obtained, however, from a slightly modified, analytic wind-compression model with a more detailed specification of the fixed wind outflow and a lower boundary set to the sonic radius along a rotationally oblate stellar surface. Hence, despite these detailed differences, the general predicted effect of disk formation by wind compression toward the equator is substantially confirmed.

Owocki, Stanley P.↗

NASA NTRS2004

Accreting Millisecond Pulsars: Neutron Star Masses and Radii

High amplitude X-ray brightness oscillations during thermonuclear X-ray bursts were discovered with the Rossi X-ray Timing Explorer (RXTE) in early 1996. Spectral and timing evidence strongly supports the conclusion that these oscillations are caused by rotational modulation of the burst emission and that they reveal the spin frequency of neutron stars in low mass X-ray binaries. The recent discovery of X-ray burst oscillations from two accreting millisecond pulsars has confirmed this basic picture and provided a new route to measuring neutron star properties and constraining the dense matter equation of state. I will briefly summarize the current observational understanding of accreting millisecond pulsars, and describe recent attempts to determine the mass and radius of the neutron star in XTE J1814-338.

Strohmayer, Tod↗

NASA NTRS2013

Engineering Evaluation of International Low Impact Docking System Latch Hooks

The international Low Impact Docking System (iLIDS) provides a structural arrangement that allows for visiting vehicles to dock with the International Space Station (ISS) (Fig 1). The iLIDS docking units are mechanically joined together by a series of active and passive latch hooks. In order to preserve docking capability at the existing Russian docking interfaces, the iLIDS latch hooks are required to conform to the existing Russian design. The latch hooks are classified as being fail-safe. Since the latch hooks are fail-safe, the hooks are not fracture critical and a fatigue based service life assessment will satisfy the structural integrity requirements. Constant amplitude fatigue testing to failure on four sets of active/passive iLIDS latch hooks was performed at load magnitudes of 10, 11, and 12 kips. Failure analysis of the hook fatigue failures identified multi-site fatigue initiation that was effectively centered about the hook mid-plane (consistent with the 3D model results). The fatigue crack initiation distribution implies that the fatigue damage accumulation effectively results in a very low aspect ratio surface crack (which can be simulated as thru-thickness crack). Fatigue damage progression resulted in numerous close proximity fatigue crack initiation sites. It was not possible to determine if fatigue crack coalescence occurs during cyclic loading or as result of the fast fracture response. The presence of multiple fatigue crack initiation sites on different planes will result in the formation of ratchet marks as the cracks coalesce. Once the stable fatigue crack becomes unstable and the fast fracture advances across the remaining ligament and the plane stress condition at a free-surface will result in failure along a 45 deg. shear plane (slant fracture) and the resulting inclined edge is called a shear lip. The hook thickness on the plane of fatigue crack initiation is 0.787". The distance between the shear lips on this plane was on the order of 0.48" and it was effectively centered about the mid-plane of the section. The numerous ratchet marks between the shear lips on the fracture initiation plane are indicative of multiple fatigue initiation sites within this region. The distribution of the fatigue damage about the centerline of the hook is consistent with the analytical results that demonstrate peak stress/strain response at the mid-plane that decreases in the direction of the hook outer surfaces. Scanning electron microscope images of the failed sections detected fatigue crack striations in close proximity to the free surface of the hook radius. These findings were documented at three locations on the fracture surface : 1) adjacent to the left shear lip, 2) adjacent to the right shear lip, and 3) near the centerline of the section. The features of the titanium fracture surface did not allow for a determination of a critical crack size via identification of the region where the fatigue crack propagation became unstable. The fracture based service life projections where benchmarked with strain-life analyses. The strainrange response in the hook radius was defined via the correlated finite element models and the modified method of universal slopes was incorporated to define the strain-life equation for the titanium alloy. The strain-life assessment confirmed that the fracture based projections were reasonable for the loading range of interest. Based upon the analysis and component level fatigue test data a preliminary service life capability for the iLIDS active and passive hooks of 2 lifetimes is projected (includes a scatter factor of 4).

Martinez, J.↗

NASA NTRS1994

Three-dimensional hydrodynamic Bondi-Hoyle accretion. 1: Code validation and stationary accretors

We investigate the hydrodynamics of three-dimensional classical Bondi-Hoyle accretion. Totally absorbing stationary spheres of varying sizes (from 10.0 down to 0.02 Bondi radii) accrete matter from a homogeneous and slightly perturbed medium, which is taken to be an ideal gas (gamma = 5/3 or 1.2). To accommodate the long-range gravitational forces, the extent of the computational volume is typically a factor of 100 larger than the radius of the accretor. We compare the numerical mass accretion rates with the theoretical predictions of Bondi, to assess the validity of the code. The hydrodynamics is modeled by the piecewise parabolic method. No energy sources (nuclear burning) or sinks (radiation, conduction) are included. The resolution in the vicinity of the accretor is increased by multiply nesting several (6-8) grids around the stationary sphere, each finer grid being a factor of 2 smaller spatially than the next coarser grid. This allows us to include a coarse model for the surface of the accretor (vacuum sphere) on the finest grid while at the same time evolving the gas on the coarser grids. The accretion rates derived numerically are in in very good agreement (to about 10% over several orders of magnitude) with the values given by Bondi for a stationary accretor within a hydrodynamic medium. However, the equations have to be changed in order to include the finite size of the accretor (in some cases very large compared to the sonic point or even to the Bondi radius).

Ruffert, Maximilian↗

NASA NTRS1989

Infrared emission from ultracompact H II regions

Models of circumstellar dust shells around ultracompact (UC) H II regions were constructed that accurately fit the observed IR flux distributions. The models assume spherically symmetric dust shells illuminated by stars whose bolometric luminosity is inferred from the integrated FIR flux densities. Assuming ionization by a single zero age main sequence (ZAMS) star, the relations of Panagia were used to infer the stellar radius and effective temperature for a given luminosity. The grain mixture in the dust shell consists of bare graphite and silicate grains with the optical properties of Draine and Lee and the size distribution of Mathis et al. The computer code of Wolfire et al was used to solve the radiative transfer equations through a spherical dust shell. The model provides monochromatic luminosities, dust temperatures, and opacities through the shell. Aside from the stellar and dust properties, the only other input parameters to the model are the distance to the shell, the form of its density distribution, and its outer radius. Predictions of the model are compared with observations of a typical UC H II region and the run of dust temperature with radius and the optical depth with frequency are discussed.

Churchwell, ED↗

NASA NTRS1991

Stability of the flow around a cylinder: The spin-up problem

A concern is the flow around an infinite cylinder, which at a certain instant impulsively starts to spin. The growth of vortices in the resulting boundary layer occurring outside the cylinder is investigated. This layer is essentially a Rayleigh layer which grows with time, so the mechanism involved is similar to that studied in Hall (1983). Vortices with wavenumber comparable to the layer thickness are shown to be described by partial differential equations that govern the system numerically. It is assumed that the Rayleigh layer is thin, so particles are confined to move in a path with radius of curvature the same as the cylinder. The Goertler number is a function of time, so the time scale which produces an order, is considered one Goertler number. The right hand branch calculation is considered by letting the time tend to infinity, also inviscid Goertler modes are considered.

Otto, S. R.↗

NASA NTRS1993

Generation of monodisperse droplets by spontaneous condensation of flow in nozzles

Submicron size monodisperse particles are of interest in many industrial and scientific applications. These include the manufacture of ceramic parts using fine ceramic particles, the production of thin films by deposition of ionized clusters, monodisperse seed particles for laser anemometry, and the study of size dependence of cluster chemical and physical properties. An inexpensive and relatively easy way to generate such particles is by utilizing the phenomenon of spontaneous condensation. The phenomenon occurs when the vapor or a mixture of a vapor and a noncondensing gas is expanded at a high expansion rate. The saturation line is crossed with the supercooled vapor behaving like a gas, until all of a sudden at the so called Wilson point, condensation occurs, resulting in a large number of relatively monodisperse droplets. The droplet size is a function of the expansion rate, inlet conditions, mass fraction of vapor, gas properties, etc. Spontaneous condensation of steam and water vapor and air mixture in a one dimensional nozzle was modeled and the resulting equations solved numerically. The droplet size distribution at the exit of various one dimensional nozzles and the flow characteristics such as pressure ratio, mean droplet radius, vapor and droplet temperatures, nucleation flux, supercooling, wetness, etc., along the axial distance were obtained. The numerical results compared very well with the available experimental data. The effect of inlet conditions, nozzle expansion rates, and vapor mass fractions on droplet mean radius, droplet size distribution, and pressure ratio were examined.

Lai, Der-Shaiun↗

NASA NTRS2014

Modified Displacement Transfer Functions for Deformed Shape Predictions of Slender Curved Structures with Varying Curvatives

To eliminate the need to use finite-element modeling for structure shape predictions, a new method was invented. This method is to use the Displacement Transfer Functions to transform the measured surface strains into deflections for mapping out overall structural deformed shapes. The Displacement Transfer Functions are expressed in terms of rectilinearly distributed surface strains, and contain no material properties. This report is to apply the patented method to the shape predictions of non-symmetrically loaded slender curved structures with different curvatures up to a full circle. Because the measured surface strains are not available, finite-element analysis had to be used to analytically generate the surface strains. Previously formulated straight-beam Displacement Transfer Functions were modified by introducing the curvature-effect correction terms. Through single-point or dual-point collocations with finite-elementgenerated deflection curves, functional forms of the curvature-effect correction terms were empirically established. The resulting modified Displacement Transfer Functions can then provide quite accurate shape predictions. Also, the uniform straight-beam Displacement Transfer Function was applied to the shape predictions of a section-cut of a generic capsule (GC) outer curved sandwich wall. The resulting GC shape predictions are quite accurate in partial regions where the radius of curvature does not change sharply.

displacement transfer functions↗

NASA NTRS1972

Analytical study of striated nozzle flow with small radius of curvature ratio throats

An analytical method was developed which is capable of estimating the chamber and throat conditions in a nozzle with a low radius of curvature throat. The method was programmed using standard FORTRAN 4 language and includes chemical equilibrium calculation subprograms (modified NASA Lewis program CEC71) as an integral part. The method determines detailed and gross rocket characteristics in the presence of striated flows and gives detailed results for the motor chamber and throat plane with as many as 20 discrete zones. The method employs a simultaneous solution of the mass, momentum, and energy equations and allows propellant types, 0/F ratios, propellant distribution, nozzle geometry, and injection schemes to be varied so to predict spatial velocity, density, pressure, and other thermodynamic variable distributions in the chamber as well as the throat. Results for small radius of curvature have shown good comparison to experimental results. Both gaseous and liquid injection may be considered with frozen or equilibrium flow calculations.

Norton, D. J.↗

NASA NTRS2016

Investigation of Damping Physics and CFD Tool Validation for Simulation of Baffled Tanks at Variable Slosh Amplitude

Determination of slosh damping is a very challenging task as there is no analytical solution. The damping physics involves the vorticity dissipation which requires the full solution of the nonlinear Navier-Stokes equations. As a result, previous investigations were mainly carried out by extensive experiments. A systematical study is needed to understand the damping physics of baffled tanks, to identify the difference between the empirical Miles equation and experimental measurements, and to develop new semi-empirical relations to better represent the real damping physics. The approach of this study is to use Computational Fluid Dynamics (CFD) technology to shed light on the damping mechanisms of a baffled tank. First, a 1-D Navier-Stokes equation representing different length scales and time scales in the baffle damping physics is developed and analyzed. Loci-STREAM-VOF, a well validated CFD solver developed at NASA MSFC, is applied to study the vorticity field around a baffle and around the fluid-gas interface to highlight the dissipation mechanisms at different slosh amplitudes. Previous measurement data is then used to validate the CFD damping results. The study found several critical parameters controlling fluid damping from a baffle: local slosh amplitude to baffle thickness (A/t), surface liquid depth to tank radius (d/R), local slosh amplitude to baffle width (A/W); and non-dimensional slosh frequency. The simulation highlights three significant damping regimes where different mechanisms dominate. The study proves that the previously found discrepancies between Miles equation and experimental measurement are not due to the measurement scatter, but rather due to different damping mechanisms at various slosh amplitudes. The limitations on the use of Miles equation are discussed based on the flow regime.

Yang, H. Q.↗

NASA NTRS2018

Validity of Miles Equation in Predicting Propellant Slosh Damping in Baffled Tanks at Variable Slosh Amplitude

Determination of slosh damping is a very challenging task as there is no analytical solution. The damping physics involves the vorticity dissipation which requires the full solution of the nonlinear Navier-Stokes equations. As a result, previous investigations were mainly carried out by extensive experiments. A systematical study is needed to understand the damping physics of baffled tanks, to identify the difference between the empirical Miles equation and experimental measurements, and to develop new semi-empirical relations to better represent the real damping physics. The approach of this study is to use Computational Fluid Dynamics (CFD) technology to shed light on the damping mechanisms of a baffled tank. First, a 1-D Navier-Stokes equation representing different length scales and time scales in the baffle damping physics is developed and analyzed. Loci-STREAM-VOF, a well validated CFD solver developed at NASA MSFC, is applied to study the vorticity field around a baffle and around the fluid-gas interface to highlight the dissipation mechanisms at different slosh amplitudes. Previous measurement data is then used to validate the CFD damping results. The study found several critical parameters controlling fluid damping from a baffle: local slosh amplitude to baffle thickness (A/t), surface liquid depth to tank radius (d/R), local slosh amplitude to baffle width (A/W); and non-dimensional slosh frequency. The simulation highlights three significant damping regimes where different mechanisms dominate. The study proves that the previously found discrepancies between Miles equation and experimental measurement are not due to the measurement scatter, but rather due to different damping mechanisms at various slosh amplitudes. The limitations on the use of Miles equation are discussed based on the flow regime.

Yang, H. Q.↗

NASA NTRS2018

Validity of Miles Equation in Predicting Propellant Slosh Damping in Baffled Tanks at Variable Slosh Amplitude

Determination of slosh damping is a very challenging task as there is no analytical solution. The damping physics involves the vorticity dissipation which requires the full solution of the nonlinear Navier-Stokes equations. As a result, previous investigations were mainly carried out by extensive experiments. A systematical study is needed to understand the damping physics of baffled tanks, to identify the difference between the empirical Miles equation and experimental measurements, and to develop new semi-empirical relations to better represent the real damping physics. The approach of this study is to use Computational Fluid Dynamics (CFD) technology to shed light on the damping mechanisms of a baffled tank. First, a 1-D Navier-Stokes equation representing different length scales and time scales in the baffle damping physics is developed and analyzed. Loci-STREAM-VOF, a well validated CFD solver developed at NASA MSFC, is applied to study the vorticity field around a baffle and around the fluid-gas interface to highlight the dissipation mechanisms at different slosh amplitudes. Previous measurement data is then used to validate the CFD damping results. The study found several critical parameters controlling fluid damping from a baffle: local slosh amplitude to baffle thickness (A/t), surface liquid depth to tank radius (d/R), local slosh amplitude to baffle width (A/W); and non-dimensional slosh frequency. The simulation highlights three significant damping regimes where different mechanisms dominate. The study proves that the previously found discrepancies between Miles equation and experimental measurement are not due to the measurement scatter, but rather due to different damping mechanisms at various slosh amplitudes. The limitations on the use of Miles equation are discussed based on the flow regime.

Yang, H. Q.↗

NASA NTRS1971

An analysis of the flow field near the fuel injection location in a gas core reactor.

An analytical study is presented which shows the effects of large energy release and the concurrent high acceleration of inner stream fluid on the coaxial flow field in a gas core reactor. The governing equations include the assumptions of only radial radiative transport of energy represented as an energy diffusion term in the Euler equations. The method of integral relations is used to obtain the numerical solution. Results show that the rapidly accelerating, heat generating inner stream actually shrinks in radius as it expands axially.

Weinstein, H.↗

NASA NTRS1986

Magnetohydrodynamic solitons and radio knots in jets

Weakly nonlinear surface waves are examined in the context of the beam model for jetlike radio sources. By introducing a finite scale length, viz. the beam radius, geometrical dispersion can act to balance nonlinear wave growth and thereby produce solitons, localized wave packets of stable waveform. A method for obtaining a soliton equation from the MHD equations is presented and then applied to radio knots in jets.

Fiedler, R.↗

NASA NTRS1985

Interface shape in Czochralski grown crystals - Effect of conduction and radiation

A sequential modular computational scheme has been proposed for the calculation of temperature profiles in the melt and crystal including the melt-crystal interface shape and the crystal pulling rate for a fixed crystal radius. The heat transfer in the melt is assumed to occur by conduction only. The shape of melt-gas meniscus, described by Laplace-Young equation, is incorporated in the model and its effects on interface shape and pulling rate are examined. Further, the model incorporates the detailed radiation interaction among the various surfaces in the puller using the Gebhart enclosure theory which accounts for both direct and reflected radiation. The effects of various process parameters on the interface shape and the pulling rate have been investigated. The results of this study indicate that the shape of the melt-gas meniscus has a significant effect on the pulling rate and the interface shape in conformity with earlier studies. Further, it is shown that a simple radiation model (Stefan's model) is inadequate to model the radiation heat exchange in the Czochralski puller apparatus and the detailed Gebhart analysis is necessary for accurate calculation of both the temperature profile in the crystal as well as the interface shape.

Srivastava, R. K.↗

NASA NTRS1992

Numerical Modeling of a Vortex Stabilized Arcjet

Arcjet thrusters are being actively considered for use in Earth orbit maneuvering applications. Experimental studies are currently the chief means of determining an optimal thruster configuration. Earlier numerical studies have failed to include all of the effects found in typical arcjets including complex geometries, viscosity, and swirling flow. Arcjet geometries are large area ratio converging nozzles with centerbodies in the subsonic portion of the nozzle. The nozzle walls serve as the anode while the centerbody functions as the cathode. Viscous effects are important because the Reynolds number, based on the throat radius, is typically less than 1,000. Experimental studies have shown that a swirl or circumferential velocity component stabilizes a constricted arc. This dissertation describes the equations governing flow through a constricted arcjet thruster. An assumption that the flowfield is in local thermodynamic equilibrium leads to a single fluid plasma temperature model. An order of magnitude analysis reveals the governing fluid mechanics equations are uncoupled from the electromagnetic field equations. A numerical method is developed to solve the governing fluid mechanics equations, the Thin Layer Navier-Stokes equations. A coordinate transformation is employed in deriving the governing equations to simplify the application of boundary conditions in complex geometries. An axisymmetric formulation is employed to include the swirl velocity component as well as the axial and radial velocity components. The numerical method is an implicit finite-volume technique and allows for large time steps to reach a converged steady-state solution. The inviscid fluxes are flux-split, and Gauss-Seidel line relaxation is used to accelerate convergence. Converging-diverging nozzles with exit-to-throat area ratios up to 100:1 and annular nozzles were examined. Quantities examined included Mach number and static wall pressure distributions, and oblique shock structures. As the level of swirl and viscosity in the flowfield increased the mass flow rate and thrust decreased. The technique was used to predict the flow through a typical arcjet thruster geometry. Results indicate swirl and viscosity play an important role in the complex geometry of an arcjet.

Pawlas, Gary E.↗

NASA NTRS1950

Two-dimensional compressible flow in centrifugal compressors with straight blades

Six numerical examples are presented for steady, two-dimensional, compressible, nonviscous flow in centrifugal compressors with thin straight blades, the center lines of which generate the surface of a right circular cone when rotated about the axis of the compressor. A seventh example is presented for incompressible flow. The solutions were obtained in a region of the compressors, including the impeller tip, that was considered to be unaffected by the diffuser vanes or by the impeller-inlet configuration. Each solution applies to radial and mixed flow compressors with various cone angles but with the same angle between blades on the conic flow surface. The solution also apply to radial and mixed flow turbines with the rotation and the flow direction reversed. The effects of variations in the following parameters were investigated: (1) flow rate, (2) impeller-tip speed, (3) variation of passage height with radius, and (4) angle between blades on conic flow surface. The numerical results are presented in plots of the streamlines and constant Mach number lines. Correlation equations are developed whereby the flow conditions in any impeller with straight blades can be determined (in the region investigated by this analysis) for all operating conditions.

Stanitz, John D↗

NASA NTRS1995

Bounce-Averaged Hamiltonian for Charged Particles in an Axisymmetric but Nondipolar Model Magnetosphere

In order to facilitate bounce-averaged guiding center simulations of geomagnetically trapped particles, we express the kinetic energy of a particle with magnetic coordinates (L,phi) as an analytic function of the first two adiabatic invariants (M, J) and the L value of the field line. The magnetic field model is axisymmetric, consisting of a dipolar B field plus a uniform southward magnetic field parallel to the dipole moment mu(sub E). This model magnetosphere is surrounded by a circular equatorial neutral line whose radius b is an adjustable parameter. The L value of a field line is (by definition) inversely proportional to the flux enclosed by the corresponding magnetic shell of equatorial radius r(sub 0), and the L value at the neutral line (r(sub 0) = b) is denoted L*. The azimuthal coordinate phi measures magnetic local time. The best functional representation found for the normalized difference (L(exp 3)a(exp 3)/mu(sub E))(B(sub m) - B(sub 0)) between mirror-point field B(sub m) and equatorial field B(sub 0) along any field line is a 5-term expansion in powers (2/3 through 6/3) of the quantity X equivalent to (La/mu(sub E))(exp 1/2)K, where K equivalent to (J(exp 2)/8m(sub 0)M)(exp 1/2) is an adiabatically conserved quantity independent of particle energy, m(sub 0) is the rest mass of the particle, and a is the radius of the Earth. This functional form is motivated by results for limiting cases in which particles mirror very near and very far from the magnetic equator. Expansion coefficients corresponding to various powers of X are obtained from least squares fits to numerically computed results for X as a function of L and B(sub m). These are accurately expressible as fourth-order polynomials in (r(sub 0)/b)(exp 3), hence indirectly as functions of L/L* = 3La/2b. This representation, which leads (except for a manageably small region of parameter space) to better than 1% accuracy in the specification of B(sub m) as a function of K and L, allows bounce-averaged guiding center simulations to be performed without actually tracing the bounce motions of individual particles. Bounce-averaged drifts L' (meridional) and phi' (azimuthal) are proportional to derivatives of the Hamiltonian H (sum of kinetic and potential energies) with respect to phi and L, respectively. Our formulation thus provides a computationally efficient method for tracing the bounce-averaged adiabatic motion (conserving all three invariants) and nonadiabatic transport (violating the third invariant while conserving the first two invariants) of geomagnetically trapped particles in the model magnetosphere.

Schulz, Michael↗